Weblogic server maintenance

Hi all,
.I have a three machine setup ( weblogic 6.1 application server on
HP UX 11i , Oracle database server HP UX 11i ,Windows 2000 server IIS 5.0
acting as web server.).
I'm making a list of parameters for the above setup, which an
administartor needs to monitor so as to ensure smooth working and high
availablilty of the system.Also the daily/weekly activites that needs to be
carried out.
Can anyone share his/her knowledge about how they manage their setups.Anyone
seen any docs on bea website which disusss system management issues.
Regards
PS

Hi Ahmed
Sorry to be pushy :) but unfortunately its better to create a separate middleware home to install JDeveloper. Its just another folder thats all. JDeveloper will have its own small integrated weblogic server good enough to deploy and test any J2EE apps except for SOA/BPM.
I have seen many users facing issues having JDeveloper and WLS + SOA in the same middleware home (same folder). The thing is these 2 step over each other and refer to same home and overwrite some modules. When you try to Create a SOA/BPM Domain, you will see Project Facets from your JDeveloper and also from WLS+SOA and it will be fully messed up. It may work but its not supported and may run into issues down the line.
For SOA/BPM you should and must have separate standalone weblogic server + soa suite on top of this.
Finally here's an official note from Oracle:
http://docs.oracle.com/cd/E16162_01/install.1112/e17074/ojdig.htm#BDCJDDFE
See Section "3.3 Installer Screens" with below Notes. Install JDeveloper in a NEW home except for ADF. Also on windows os, do not have any spaces between the folder names.
Notes:
The JDeveloper component should always be installed in new Middleware Home. The only component in the Oracle installer that can be installed into an existing Middleware Home is the Application Development Framework, and that should not be done if ADF has already been installed on the system by other Oracle Fusion Middleware products.
For the remainder of this document, in the context of the Studio Edition, MW_HOME has been used to represent the Middleware Home directory that you have chosen. For example, if you selected C:\Oracle\ as your Middleware Home directory, then MW_HOME would refer to C:\Oracle\.
Thanks
Ravi Jegga

Similar Messages

The product maintenance level of the current installer weblogic server 10.3

Hello members,
I already install weblogic, Oracle SOA and every thing work file, well later in last step when i tried to install Jdeveloper so i choose use existing Middleware i got an error that Jdeveloper and Middleware that i already install at PC
Is different versions, my question is not have a way to i can install jdeveloper at existing middleware i dont want to create other middleware.
here is image for error that got when i tried install jdeveloper at existing middleware http://www.mediafire.com/view/?z13uhrpj0ay760g
regards,,

Hi Ahmed
Sorry to be pushy :) but unfortunately its better to create a separate middleware home to install JDeveloper. Its just another folder thats all. JDeveloper will have its own small integrated weblogic server good enough to deploy and test any J2EE apps except for SOA/BPM.
I have seen many users facing issues having JDeveloper and WLS + SOA in the same middleware home (same folder). The thing is these 2 step over each other and refer to same home and overwrite some modules. When you try to Create a SOA/BPM Domain, you will see Project Facets from your JDeveloper and also from WLS+SOA and it will be fully messed up. It may work but its not supported and may run into issues down the line.
For SOA/BPM you should and must have separate standalone weblogic server + soa suite on top of this.
Finally here's an official note from Oracle:
http://docs.oracle.com/cd/E16162_01/install.1112/e17074/ojdig.htm#BDCJDDFE
See Section "3.3 Installer Screens" with below Notes. Install JDeveloper in a NEW home except for ADF. Also on windows os, do not have any spaces between the folder names.
Notes:
The JDeveloper component should always be installed in new Middleware Home. The only component in the Oracle installer that can be installed into an existing Middleware Home is the Application Development Framework, and that should not be done if ADF has already been installed on the system by other Oracle Fusion Middleware products.
For the remainder of this document, in the context of the Studio Edition, MW_HOME has been used to represent the Middleware Home directory that you have chosen. For example, if you selected C:\Oracle\ as your Middleware Home directory, then MW_HOME would refer to C:\Oracle\.
Thanks
Ravi Jegga

Unable to access java web application index page on Weblogic server 10.3.6

Hi,
I have deployed a Web application on Weblogic server.
My war file is very basic with just a index page.
I am able to deploy & access its index page properly in OC4J ( applicaton server on soa suite 10g ) and apache tomcat.
But when i deployed same war file in weblogic am not able to access its index page, Getting below error:
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.5.4 503 Service Unavailable*The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
status=Prepared, Consolidated State=Prepared, Target-Specific State= Prepared.
what does Prepared indicates here?*
Adminserver.log prints blow log when i try to access the index page
####<Dec 26, 2012 8:27:17 AM GMT> <Warning> <netuix> <soa-app-dev-01.am.health.ge.com> <AdminServer> <[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'> <501226496> <> <9b375c7445d8c121:79ee4f70:13bc880be7a:-8000-0000000000000209> <1356510437306> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WebAppApplicationOverviewPage&WebAppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3D*Weblogs*%2CType%3DAppDeployment%22%29.>
My Deployment descriptors are as below:
Web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
<display-name>Weblogs</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
<servlet>
<description></description>
<display-name>SOA11gLogServlet</display-name>
<servlet-name>SOA11gLogServlet</servlet-name>
<servlet-class>com.ge.healthcare.soa.logs.SOA11gLogServlet</servlet-class>
</servlet>
</web-app>
==================================================================
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.3/weblogic-web-app.xsd">
<wls:weblogic-version>10.3.6</wls:weblogic-version>
<wls:context-root>/Weblogs</wls:context-root>
</wls:weblogic-web-app>
==================================================================
Please help me to resolve the issue,its bit urgent.Let me know in case of anything else required to check and verify.
Thanks in advance.
Regards,
Rahul Aahir
Edited by: 978673 on Dec 26, 2012 4:22 PM
Edited by: 978673 on Dec 26, 2012 4:32 PM

In weblogic 10.3.6, when you deploy using console, you have to click on start button which appears in Deployments page.
Your weblogic.xml file should be as below:
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.3/weblogic-web-app.xsd">
<wls:weblogic-version>10.3.6</wls:weblogic-version>
<wls:context-root>/logs</wls:context-root>
<container-descriptor>
<index-directory-enabled>true</index-directory-enabled>
</container-descriptor>
<virtual-directory-mapping>
     <local-path>/opt/oracle/logs</local-path> (as per your path)
     <url-pattern>/logs/*</url-pattern>
     <url-pattern>*.log</url-pattern>
</virtual-directory-mapping>
</wls:weblogic-web-app>

WebLogic Server 9.2 MP3 compatibility with WLS 9.2

My companies product currently supports WebLogic Server 9.2.x.
Is WebLogic Server 9.2 fully compatibile with WebLogic Server 9.2 MP3?
And, what does the MP3 acronym stand for, please.
Edited by: [email protected] on Feb 6, 2009 2:01 PM

When your product is certified on Weblogic Server 9.2.x, it means it supports WLS 9.2.3(9.2 MP3). As David says MP3 is the Maintenance Pack Release(Bug fix).
Generally companies would test their products on a particular weblogic version before certifying it as supported for their product.

Where to Download Oracle Weblogic Server 9.2.1 Windows Platform 32 Bit

I am trying to search and download Weblogic Server Standard Edition 9.2.1 Named User License...
Kindly help with a direct link to download
Edited by: user11766229 on Feb 1, 2011 1:12 AM

It is recommended to use latest maintenance pack of any WLS version, in this case it would be WLS 9.2 MP4. It is not only to avail all the fixes but also to be inline with Oracle's error correction policy.
The KM Note 763603.1 has all the archive versions of WebLogic products.

Admin training for WebLogic Server - just the Forms and Reports parts

We will be upgrading our Forms & Reports application from 10gR2 to 11g. Our customers (well their DBAs) will need to install and manage WebLogic Server. So I'm looking for a training course where they can learn how to do that. The WebLogic Server admin course is 5 days, and another 4 for Advanced System Admin, which seems a lot as they are only going to use the parts required for Forms and Reports.
I have read through the tutorial Using Oracle Enterprise Manager to Administer Forms Services. Is this the extent of what they need to know, or is there another chunk of the iceberg under the water? Can you recommend a training course please.

Hi,
After installing forms, the installer itself configures the WLS with the domains etc and also deploys the forms. Once after this, it is similar to that of 10g Application Server. All the maintenance of the forms is done using Enterprise Manager (EM Console). So, the section you mentioned should suffice.
-Arun

Problem with links in deployed ADF application to Weblogic Server 11g

Hi everyone !
I have a query here, firstly, I have created an ADF application using Jdeveloper 11g and have successfully deployed (EAR file) onto the weblogic server.
However, after testing out the application, the linking within the application does not seem to work. Whenever I click on a link or button, the page refreshes but the result is not displayed.
What could have cause the problem?
Thanks
Gavin

Are the ADF runtime libraries installed into the WebLogic server?

How to delete the deployed composite in weblogic server 11g

Can someone tell me how to delete the deployed composite in weblogic server 11g ?I'm facing an issue where the weblogic server is getting started and immediately after sometime the server changes to "Force shutdown"..When i checked the logs,there is an error in one of the composite i deployed..So now i wanted to delete the deployed composite?Please help ....
Thanks

Hi
1. Deleting a domain will not hold any references. But make sure that under your user_projects/applications also remove the folder that matches with your domain. Basically under user_projects folder you will see 2 folders named applications and domains. When you create a domain say mySoaDomain, it will crate a folder with the same name under applications folder also with few files like em.ear. If you do this, then you can crate a new soa domain and use the same old name.
2. NOW comes the most important thing. If you create a new SOADomain, at one point, you had to give details for soainfra and mds schemas. If you give your current existing db details (that was used for your old deleted domain), then you may still have the issues. Because the soainfra db may still have the instances for your old process.
3. If you really want to have a full clean soa domain, here is what you do:
a) Run rcu and drop the existing schemas for soainfra and mds.
b) Run rcu again and create above schemas again.
c) Now create SOADomain using config wizard and refer above clean rcu db and you are all set.
3. Under your domain root folder, just searh for files named with your workflow and you should see the .jar location.
Thanks
Ravi Jegga

Error while deploying ADF application to a standalone weblogic server

I am using Jdeveloper 11.1.1.6.0, and I am trying to deploy my application to a standalone server running on a Unix box and I get the following error message:
[04:12:44 PM] ---- Deployment started. ----
[04:12:44 PM] Target platform is (Weblogic 10.3).
[04:13:00 PM] Retrieving existing application information
[04:13:01 PM] Running dependency analysis...
[04:13:01 PM] Building...
[04:13:05 PM] Deploying profile...
[04:13:09 PM] Wrote Web Application Module to C:\JDeveloper\PortingAppln\ViewController\deploy\ADF1.war
[04:13:13 PM] Deploying Application...
[04:20:19 PM] [Deployer:149191]Operation 'deploy' on application 'ADF1' is initializing on 'ADF1'
[04:20:45 PM] Weblogic Server Exception: weblogic.application.WrappedDeploymentException: oracle/jrf/PortabilityLayerException
[04:20:45 PM] See server logs or server console for more details.
[04:20:45 PM] weblogic.application.WrappedDeploymentException: oracle/jrf/PortabilityLayerException
[04:20:46 PM] #### Deployment incomplete. ####
[04:20:46 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Can someone help me with this problem.
Thanks,
Srini.

Well, how did you do?
I am having a similar problem.
1) Installed WLS 10.3.5 on a Linux machine
2) Installed ADF runtime libraries (ofm_appdev_generic_11.1.1.5.0_disk1_1of1.zip)
3) I can see at deployments
- adf.oracle.businesseditor(1.0,11.1.1.2.0)
- adf.oracle.domain(1.0,11.1.1.2.0)
- adf.oracle.domain.webapp(1.0,11.1.1.2.0)
- DMS Application (11.1.1.1.0)
- em
- emai
- emas
- emcore
- FMW Welcome Page Application (11.1.0.0.0)
- jsf(1.2,1.2.9.0)
I created from scratch a new Fusion Web app. It just has 1 ADF read-only table based on the HR.COUNTRIES table. It runs perfectly on the integrated WL.
I cannot deploy it to my standalone WLS. The error:
[02:01:37 PM] Unable to determine the target platform from the Profile. Using default
[02:01:37 PM] ---- Deployment started. ----
[02:01:37 PM] Target platform is (Weblogic 10.3).
[02:01:37 PM] Retrieving existing application information
[02:01:37 PM] Running dependency analysis...
[02:01:37 PM] Building...
[02:01:37 PM] Deploying 2 profiles...
[02:01:37 PM] Wrote Web Application Module to C:\JDeveloper\mywork\TesteAPP\ViewController\deploy\TesteAPP_ViewController_webapp.war
[02:01:37 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\TesteAPP\deploy\TesteAPP_Project1_TesteAPP.ear
[02:01:37 PM] Deploying Application...
[02:01:39 PM] [Deployer:149191]Operation 'deploy' on application 'TesteAPP_Project1_TesteAPP' is initializing on 'ADFServer'
[02:01:39 PM] [Deployer:149193]Operation 'deploy' on application 'TesteAPP_Project1_TesteAPP' has failed on 'ADFServer'
[02:01:39 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application TesteAPP_Project1_TesteAPP on ADFServer.: Failed to load webapp: 'testeADF'.
[02:01:39 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'testeADF'
[02:01:39 PM] Caused by: weblogic.management.DeploymentException: Error: Unresolved Webapp Library references for "ServletContext@1021039597[app:TesteAPP_Project1_TesteAPP module:testeADF path:/testeADF spec-version:2.5]", defined in weblogic.xml [Extension-Name: jsf, Specification-Version: 2, exact-match: false]
[02:01:39 PM] See server logs or server console for more details.
[02:01:39 PM] weblogic.application.ModuleException: Failed to load webapp: 'testeADF'
[02:01:39 PM] Deployment cancelled.
[02:01:39 PM] ---- Deployment incomplete ----.
[02:01:39 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
I am using JDeveloper 11.1.2.1.0
What am I missing here? It must be something obvious, but I am stuck.
Thanks in advance.

JoltConnectionPool can not start in weblogic server

Hi
I am trying to run the sample Tuxedo provided application which uses Servlets or Ejb.
Now the Tuxedo Server has been configured and running properly.
I have WebLogic Server installed and had created the JoltSessionPool with name "MAJoltConnectionPool" and had also defined the StartupClass & ShutdonClass.
While defining the JoltSessionPool i had given min services as 1 and max services as 5 and others as default,
and the JoltSessionPool's target is a weblogic managed server which named ct2.
Then i tryed to start the ct2 server on command line such as:
startManagedWebLogic.cmd ct2 http://localhost:7001
I got an error in starting "MAJoltConnectionPool" but the server ct2 is starting normally.
Anyone who can help me to find out the reason? Thanks a lot.
The Command Line window shown following in the Log:
Failed to invoke startup class "MAJoltPoolStart", java.lang.Exception: Errors in starting the following connection pools :
com.bea:Name=MAJoltConnectionPool,Type=JoltConnectionPool :
Access to sensitive attribute in clear text is not allowed due to the setting of ClearTextCredentialAccessEnabled attribute in SecurityConfigurationMBean. Attr: UserPassword, MBean name: com.bea:Name=MAJoltConnectionPool,Type=JoltConnectionPool
The Entire Trace from the Log file is:
####<Mar 16, 2011 11:58:35 AM CST> <Notice> <Log Management> <HXU49> <ct2> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1300247915024> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
####<Mar 16, 2011 11:58:35 AM CST> <Info> <Diagnostics> <HXU49> <ct2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1300247915070> <BEA-320077> <Initialized the Diagnostic Accessor Service.>
####<Mar 16, 2011 11:58:35 AM CST> <Info> <WebLogicServer> <HXU49> <ct2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1300247915078> <BEA-000256> <Invoking bea.jolt.pool.servlet.weblogic.PoolManagerStartUp.main(null)>
####<Mar 16, 2011 11:58:35 AM CST> <Critical> <WebLogicServer> <HXU49> <ct2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1300247915239> <BEA-000286> <Failed to invoke startup class "MAJoltPoolStart", java.lang.Exception: Errors in starting the following connection pools :
com.bea:Name=MAJoltConnectionPool,Type=JoltConnectionPool : Access to sensitive attribute in clear text is not allowed due to the setting of ClearTextCredentialAccessEnabled attribute in SecurityConfigurationMBean. Attr: UserPassword, MBean name: com.bea:Name=MAJoltConnectionPool,Type=JoltConnectionPool
java.lang.Exception: Errors in starting the following connection pools :
com.bea:Name=MAJoltConnectionPool,Type=JoltConnectionPool : Access to sensitive attribute in clear text is not allowed due to the setting of ClearTextCredentialAccessEnabled attribute in SecurityConfigurationMBean. Attr: UserPassword, MBean name: com.bea:Name=MAJoltConnectionPool,Type=JoltConnectionPool
     at bea.jolt.pool.servlet.weblogic.impl.PoolManagerStartUpJMX.startup(PoolManagerStartUpJMX.java:216)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at bea.jolt.pool.servlet.weblogic.PoolManagerStartUp.main(PoolManagerStartUp.java:38)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeMain(ClassDeploymentManager.java:362)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:272)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:214)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployment(ClassDeploymentManager.java:207)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployments(ClassDeploymentManager.java:186)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.runStartupsAfterAppAdminState(ClassDeploymentManager.java:162)
     at weblogic.management.deploy.classdeployment.StartupClassPrelistenService.start(StartupClassPrelistenService.java:13)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
####<Mar 16, 2011 11:58:35 AM CST> <Notice> <WebLogicServer> <HXU49> <ct2> <main> <<WLS Kernel>> <> <> <1300247915288> <BEA-000365> <Server state changed to ADMIN>
####<Mar 16, 2011 11:58:35 AM CST> <Notice> <WebLogicServer> <HXU49> <ct2> <main> <<WLS Kernel>> <> <> <1300247915313> <BEA-000365> <Server state changed to RESUMING>
####<Mar 16, 2011 11:58:36 AM CST> <Notice> <WebLogicServer> <HXU49> <ct2> <main> <<WLS Kernel>> <> <> <1300247916769> <BEA-000365> <Server state changed to RUNNING>
####<Mar 16, 2011 11:58:36 AM CST> <Notice> <WebLogicServer> <HXU49> <ct2> <main> <<WLS Kernel>> <> <> <1300247916770> <BEA-000360> <Server started in RUNNING mode>
With Regards
Han

Hi
To resolve this problem , you have 2 solutions:
- modify the config.xml file to add in the tag <security-configuration> the following line :
<clear-text-credential-access-enabled>true</clear-text-credential-access-enabled>
or
- check the checkbox "Clear Text Credential Access Enabled" in the settings for the domain / security / general / advanced
restart the weblogic server to activate this change if necessary (Normaly, no restarts are necessary with weblogic server v10.3.5.0)
Hope this reponse help you (if it's not too late ;-) )
Laurent.

Error when starting Weblogic server with Coherence

We want to use Coherence 3.6 with Weblogic Server 10.3. During server startup, we get the following error. My understanding is the cluster should be started automatically based on the configuration listed below the error. Appreciate any pointers.
<Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.920/67.311 Oracle Coherence SE 3.6.0.4 <Error> (thread=Cluster, member=n/a): This member could not join the cluster because of a configuration mismatch between this member and the configuration being used by the rest of the cluster. This member specified a cluster name of "EPCIS" which did not match the name of the running cluster. This indicates that there are multiple clusters on this network attempting to use overlapping network configurations. Rejected by Member(Id=9, Timestamp=2011-11-16 13:58:42.941, Address=10.229.189.30:8088, MachineId=21022, Location=site:us.oracle.com,machine:adc2101177,process:30667, Role=WeblogicServer).>
<Dec 15, 2011 3:20:11 PM PST> <Error> <oracle.apps.pas.epc.framework.db.Cache> <BEA-000000> <java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)>
<Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.957/67.349 Oracle Coherence SE 3.6.0.4 <Error> (thread=[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Error while starting cluster: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)
CONFIGURATION:
We have the following descriptor (epcis-coherence-cache-config.xml) in $DOMAIN_HOME/epc-config:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>distributed</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme></local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
</caching-schemes>
</cache-config>
We also have tangosol-coherence-override.xml in the same dir:
<coherence>
<cluster-config>
<member-identity>
<cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>
</member-identity>
</cluster-config>
<configurable-cache-factory-config>
<class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>epcis-coherence-cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>
<license-config>
<edition-name system-property="tangosol.coherence.edition">SE</edition-name>
<license-mode system-property="tangosol.coherence.mode">dev</license-mode>
</license-config>
</coherence>
We have modified startWebLogic.sh by adding:
PRE_CLASSPATH="/slot/xyz/oracle/mwhome/oracle_common/modules/oracle.coherence_3.6/coherence.jar:${DOMAIN_HOME}/epc-config/:${PRE_CLASSPATH}"

As the error message says, your WebLogic server is trying to join a cluster that has a different cluster name.
This bit in your tangosol-coherence-override.xml file or the tangosol.coherence.clustername system property must be the same in all members of the cluster
<cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>JK

Error while starting weblogic server

Hi, I am getting following error while starting weblogic server
Unexpected Signal : 11 occurred at PC=0x40170bc5 Function name=fill_in_stack_trace__19java_lang_ThrowableG6HandleP6Thread
Library=/bea/jdk131/jre/lib/i386/client/libjvm.so
Current Java thread: at java.lang.Throwable.fillInStackTrace(Native Method) at
java.lang.Throwable.<init>(Throwable.java:78) at java.lang.Error.<init>(Error.java:37)
at java.lang.LinkageError.<init>(LinkageError.java:29) at java.lang.IncompatibleClassChangeError.<init>(IncompatibleClassChangeError.java:29)
at java.lang.AbstractMethodError.<init>(AbstractMethodError.java:30)
Environment : Weblogic 6.0 Sp2 on Linux Red hat 7.1
jdk 1.31
TIA
Ashwani

Hi,
1)Could you please try logging into sqlplus using using the below command :-
    sqlplus "/ as sysdba"
2)Execute the below command to check if the password in expired :-
select username, account_status, expiry_date, where username='MDS username';
3)Change the password if the password has been expired by following the below command :-
   alter user <user> identified by <password>;
4)Once the above steps are followed please login into the Weblogic Admin Console and follow the below steps:-
    + Go to DataSources ---> Select the MDS schema ----> change the password which was given in step no.3
    + Restart the Weblogic once again.
5)Lets us know the result.
Regards,
Prakash.

Error in deploying the war file on to the weblogic server(6.1)

Hi,
I created the war file and tried to deploy it on the weblogic server 6.1 it is unable to deploy and is give these errors i am unable to find out the problem.Can any one help me out in finding why this is so.
Help will be appreciated
java.lang.NullPointerException
     at weblogic.management.internal.MBeanProxy.getAttribute(MBeanProxy.java:253)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:187)
     at $Proxy65.isDeployed(Unknown Source)
     at weblogic.management.mbeans.custom.ApplicationManager.poll(ApplicationManager.java:744)
     at weblogic.management.mbeans.custom.ApplicationManager.update(ApplicationManager.java:206)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
     at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
     at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy5.update(Unknown Source)
     at weblogic.management.console.webapp._domain.__upload_app._jspService(__upload_app.java:149)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
     at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
     at weblogic.management.console.actions.ForwardAction.perform(ForwardAction.java:35)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Thanks,
Reji

Hi jmendelak,
In the warfile i have jsp,servlets,java classes.
In my working directory i have jsp and html files and in web-inf folder i have a folder by name classes in which i have the servlets and java classes.
I made the war file and when i tried to deploy i was getting this error.
I had previously deployed this war file on weblogic6.1 it was working fine.
I have upgraded my operating sytem to Windows2000 professional from WinNT 4.0.I reinstalled the weblogic again and had set up the environment variables.
After going through the error could you find out the reason?Is it because some seeting is missing?
Raji

Error in starting weblogic server using ant

Hi,
I am trying to start the weblogic server using ant.I used the following command:
<taskdef name="wlserver" classname="weblogic.ant.taskdefs.management.WLServer">
<classpath>
<pathelement location="${BEA_HOME}/weblogic81/server/lib/weblogic.jar" />
</classpath>
</taskdef>
<target name="start-weblogic">
<wlserver username="weblogic" password="weblogic" failonerror="false" servername="myserver" domainname="rwadomain" dir="${BEA_HOME}/user_projects/domains/rwadomain" host="localhost" port="7001" weblogichome="${BEA_HOME}/weblogic81" beahome="${BEA_HOME}" policy="${BEA_HOME}\weblogic81\server\lib\weblogic.policy" />
</target>
But it is giving me an error that java.lang.NoClassDefFoundError: weblogic/Server
I also tried the following command:
<target name="start-weblogic">
<java classname="weblogic.Server" fork="yes" classpathref="weblogic.classes" failonerror="true">
<sysproperty key="weblogic.Domain" value="rwadomain"></sysproperty>
<sysproperty key="weblogic.RootDirectory" value="C:\bea\user_projects\domains\rwadomain"></sysproperty>
<sysproperty key="weblogic.ConfigFile" value="config.xml"></sysproperty>
<sysproperty key="weblogic.ListenAddress" value="localhost"></sysproperty>
<sysproperty key="weblogic.ListenPort" value="7001"></sysproperty>
<arg line="-ms200m -mx200m"></arg>
</java>
</target>
But the problem with this command is that it does not reurn control to execute the further commands.
Please suggest something.
Thanks in advance
-amit

Hi,
You should take a look at the <parallel> ant task.
Regards,
LG

Error in Starting Weblogic Server 12c

Hi,
I get the below error when I run Weblogic server 12c. I am running it on Windows 7 Enterprise sp1.
I have installed the products. Oracle DB 11.2.0.1.0, RCU 11.1.1.6.0, Webcenter Portal & Content- 11.1.1.8.0
The main error I see is Opening of file based keystore failed from below log.
C:\Oracle\Middleware\user_projects\domains\New_domain\bin>startWebLogic.cmd >> log.txt
'C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\bin\\Installer64' is not recognized as an internal or external command,
operable program or batch file.
'C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\bin\\Installer' is not recognized as an internal or external command,
operable program or batch file.
'C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\bin\\Installer' is not recognized as an internal or external command,
operable program or batch file.
'C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\bin\\Installer' is not recognized as an internal or external command,
operable program or batch file.
FINDSTR: No search strings
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
6 Sep, 2013 2:27:09 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
JAVA Memory arguments: -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_12.1.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\Oracle\Middleware\oracle_common\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;C:\Oracle\Middleware\Oracle_WC1\wcps-services-app\modules\oracle.wcps_11.1.1\wcps-connection-mbeans.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\xqrl.jar;C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\jlib\idcloader.jar;C:\Oracle\MIDDLE~1\ORACLE~3\ucm\idc\components\NativeOsUtils\classes-NativeOsUtils.jar;
PATH=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\app2\v.narasakumar.kuchi\product\11.2.0\dbhome_1\bin;C:\app1\v.narasakumar.kuchi\product\11.2.0\dbhome_1\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Java\jdk1.6.0_38\bin;C:\Oracle\MIDDLE~1\WLSERV~1.1\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms512m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.1\server\lib\weblogic.policy -Xverify:none -Djava.endorsed.dirs=C:\Oracle\MIDDLE~1\JDK160~1/jre/lib/endorsed;C:\Oracle\MIDDLE~1\WLSERV~1.1/endorsed -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.1 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\FMWCON~1\servers\AdminServer -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Djps.auth.debug=false -Dtangosol.coherence.log=jdk -DjiveHome=C:\Oracle\MIDDLE~1\USER_P~1\domains\NEW_DO~1\config\fmwconfig\servers\AdminServer\owc_discussions -DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -Doracle.webcenter.analytics.disable-native-partitioning=false -Doracle.webcenter.tagging.scopeTags=false -Djava.awt.headless=true -Doracle.webcenter.tagging.scopeTags=false -XX:+UseParallelGC -XX:+DisableExplicitGC -Dportlet.oracle.home=C:\Oracle\Middleware\oracle_common -Dwc.oracle.home=C:\Oracle\Middleware\Oracle_WC1 -Dipm.oracle.home=C:\Oracle\Middleware\Oracle_ECM1 -Doracle.capture.home=C:\Oracle\Middleware\Oracle_ECM1 -Ducm.oracle.home=C:\Oracle\MIDDLE~1\ORACLE~3 -Dirm.oracle.home=C:\Oracle\Middleware\Oracle_ECM1 -Dem.oracle.home=C:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1211\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Server
<6 Sep, 2013 2:27:03 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<6 Sep, 2013 2:27:03 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<6 Sep, 2013 2:27:03 PM IST> <Notice> <WebLogicServer> <BEA-000395> <The following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\New_domain\lib\mbeantypes\csp-id-asserter.jar;C:\Oracle\Middleware\user_projects\domains\New_domain\lib\mbeantypes\jps-wls-trustprovider.jar.>
<6 Sep, 2013 2:27:04 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>
<6 Sep, 2013 2:27:05 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >
<6 Sep, 2013 2:27:06 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<6 Sep, 2013 2:27:07 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<6 Sep, 2013 2:27:07 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\New_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
<6 Sep, 2013 2:27:07 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\New_domain\servers\AdminServer\logs\AdminServer.log00009. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\New_domain\servers\AdminServer\logs\AdminServer.log.>
<6 Sep, 2013 2:27:07 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\New_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<6 Sep, 2013 2:27:09 PM IST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<6 Sep, 2013 2:27:09 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:148)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:170)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2984)
at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3226)
at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:383)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:406)
at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:352)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:122)
at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:88)
at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:164)
Truncated. see log file for complete stacktrace
>
<6 Sep, 2013 2:27:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
<6 Sep, 2013 2:27:09 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
<6 Sep, 2013 2:27:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
I get the same error when I execute "startWeblogic.cmd" from domain folder and bin folder.
Any help is appreciated. Thanks.

Hi,
Few comments here...
1) Seems your environment is not setup correctly but that is not the big cause here.....
2) This one is important, it seems that you installed weblogic using a different account and are trying to run it from a different account.
So the account with which you are trying to run weblogic does not have proper permission on
MW_HOME\user_projects\domains\bifoundation_domain\config\fmwconfig\bootstrap\cwallet.sso
Right click on the file and go in properties ..
Enable full control,modify,Read and execute,read and write permissions for the user you are trying to start weblogic and apply it.
if this simple steps doesnt work, please enable more logging by adding "-Djava.security.debug=jpspolicy" to startup option and grab more details.
Good Luck let me know if this works.

Weblogic server maintenance

Similar Messages

Maybe you are looking for