Weblogic server with coherence
Hi all,
Could you please provide me a "Oracle WebLogic Server 11gR1 (10.3.3) + Coherence installation guide"
Regards
cnu
As the error message says, your WebLogic server is trying to join a cluster that has a different cluster name.
This bit in your tangosol-coherence-override.xml file or the tangosol.coherence.clustername system property must be the same in all members of the cluster
<cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>JK
Similar Messages
-
Error when starting Weblogic server with Coherence
We want to use Coherence 3.6 with Weblogic Server 10.3. During server startup, we get the following error. My understanding is the cluster should be started automatically based on the configuration listed below the error. Appreciate any pointers.
<Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.920/67.311 Oracle Coherence SE 3.6.0.4 <Error> (thread=Cluster, member=n/a): This member could not join the cluster because of a configuration mismatch between this member and the configuration being used by the rest of the cluster. This member specified a cluster name of "EPCIS" which did not match the name of the running cluster. This indicates that there are multiple clusters on this network attempting to use overlapping network configurations. Rejected by Member(Id=9, Timestamp=2011-11-16 13:58:42.941, Address=10.229.189.30:8088, MachineId=21022, Location=site:us.oracle.com,machine:adc2101177,process:30667, Role=WeblogicServer).>
<Dec 15, 2011 3:20:11 PM PST> <Error> <oracle.apps.pas.epc.framework.db.Cache> <BEA-000000> <java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)>
<Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.957/67.349 Oracle Coherence SE 3.6.0.4 <Error> (thread=[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Error while starting cluster: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)
CONFIGURATION:
We have the following descriptor (epcis-coherence-cache-config.xml) in $DOMAIN_HOME/epc-config:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>distributed</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme></local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
</caching-schemes>
</cache-config>
We also have tangosol-coherence-override.xml in the same dir:
<coherence>
<cluster-config>
<member-identity>
<cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>
</member-identity>
</cluster-config>
<configurable-cache-factory-config>
<class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>epcis-coherence-cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>
<license-config>
<edition-name system-property="tangosol.coherence.edition">SE</edition-name>
<license-mode system-property="tangosol.coherence.mode">dev</license-mode>
</license-config>
</coherence>
We have modified startWebLogic.sh by adding:
PRE_CLASSPATH="/slot/xyz/oracle/mwhome/oracle_common/modules/oracle.coherence_3.6/coherence.jar:${DOMAIN_HOME}/epc-config/:${PRE_CLASSPATH}"As the error message says, your WebLogic server is trying to join a cluster that has a different cluster name.
This bit in your tangosol-coherence-override.xml file or the tangosol.coherence.clustername system property must be the same in all members of the cluster
<cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>JK -
Integrating WebLogic Server with CA SiteMinder Web Agent R6
Hi I have searched on the topic of integrating WebLogic Server with the CA SiteMinder Web Agent R6 to provide single sign on services, and have been unable to find anything. Does anyone have any experience with this that could provide some tips, or could direct me to some documentation?
It definitely can work. We have done the same thing in several installations. The question is "How secure does it need to be?" You will be using SM to do authentication. You will configure SSO to trust the SM header variable. If you really want to be secure you need to configure your boxes so that the http server on you SUSE box (for Portal) can only be accessed from the Reverse Proxy. If another machine can access it someone could spoof the header variable and log in as anyone they want.
Hope this is helpful.
Anton -
Dev2Dev,
I need to integrate weblogic server with Fatwire (CPM Tool)
I would like to know the steps or docs which help me to do that
It will be really helpful if you could send it asap.
Thanks n Regards
SureshDev2Dev,
I need to integrate weblogic server with Fatwire (CPM Tool)
I would like to know the steps or docs which help me to do that
It will be really helpful if you could send it asap.
Thanks n Regards
Suresh -
Using WebLogic Server with Oracle9i RAC
A new white paper has been posted to dev2dev -
"Using WebLogic Server with Oracle9i RAC" at
http://dev2dev.bea.com/products/wlserver81/whitepapers/wls_bea_hp.jsp
Abstract:
"This paper presents best practices when using WebLogic Server with Oracle Real Application Clusters. It includes an analysis of
various use-case and failure scenarios and proposes possible recovery solutions. This paper also includes an evaluation of
Transparent Application Failover, a product from Oracle that is functionally similar to WebLogic Server MultiPools.""satyam" <[email protected]> writes:
Can I use WebLogic Application Server 6.0, the mid level server (not the express
or the enterprise version)
with VisiBroker 4.x ?If you have ejb support - then yes - although you may want to wait for
a future 6.0 rolling patch to get updated IDL generation.
andy -
Oracle SOA Suite 11.1.1.5 and weblogic server with OEPE
Hello
Where can I find the installers for Oracel SOA Suite 11.1.1.5 and corresponding supported weblogic server with OEPE.
I want to install this on Debian and on Oracle Solaris 10 both, so better to have generic installers.
Few months ago, i could find them (2 months ago), but not now anywhere, not even on edelievery.
Where does oracle store all older version installers?
RegardsHi
Download wls1035_oepe111172 Generic Version from below link.
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
Thanks,
--Vijay -
Is there any way to start weblogic server with java 7?
Hi. Is there any way to start weblogic server with jdk 1.7?
Hi,
You can start your Weblogic Server with java 7(JDK 1.7)
Go to Domain_home/bin and click on StartWeblogic.cmd it will start your Admin Server
It depends on which JDK you have used while creating domain if you have selected Jdk 1.7 it will use the same to start the server
See the Ex:
================
starting weblogic with Java version:
java version "1.7.0_51"
Java(TM) SE Runtime Environment (build 1.7.0_51-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.51-b03, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK17~1.0_5\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Dweblogic.Name=AdminServer -
Djava.security.policy=H:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy
-Xverify:none -Xverify:none -da -Dplatform.home=H:\Oracle\MIDDLE~1\WLSERV~1.3 -
Dwls.home=H:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=H:\Oracle\MIDDLE~
1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -
Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=H:\Oracle\MIDDLE
~1\patch_wls1036\profiles\default\sysext_manifest_classpath weblogic.Server
<Mar 3, 2015 1:08:32 PM PST> <Info> <Security> <BEA-090905> <Disabling CryptoJ J
CE Provider self-integrity check for better startup performance. To enable this
check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Mar 3, 2015 1:08:33 PM PST> <Info> <Security> <BEA-090906> <Changing the defaul
t Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable
this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Mar 3, 2015 1:08:33 PM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebL
ogic Server with Java HotSpot(TM) 64-Bit Server VM Version 24.51-b03 from Oracle
Corporation>
=======================================
If you are using a Lower version of JDK and want to upgrade to JKD 1.7 you can do so by changing setDomainEnv.sh in Weblogic
Have a look at the below link to do so
The Weblogic Wasp: change java version / JDK of a weblogic domain
http://www.baigzeeshan.com/2012/05/how-to-change-jdk-used-by-weblogic.html
Hope it helps -
While integrating Weblogic server with Iplanet webserver
Hi ,
I am facing issues while connecting weblogic application server with Iplanet webserver:
while i hit the desired url, it showing the below log, it is not providing me proper page (weblogic console page )
Sat Mar 23 06:12:37 2013 <1535513639993579> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Sat Mar 23 06:12:37 2013 <1535513639993579> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[Date]=[Sat, 23 Mar 2013 00:42:37 GMT]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[Location]=[http://10.11.12.231/console/login/LoginForm.jsp]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[X-WebLogic-JVMID]=[-420809910]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Sat Mar 23 06:12:37 2013 <1535513639993579> parsed all headers OK
Sat Mar 23 06:12:37 2013 <1535513639993579> sendResponse() : uref_p->getStatus() = '302'
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs to client (add):[date]=[Sat, 23 Mar 2013 00:42:37 GMT]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs to client (add):[Location]=[http://10.11.12.231/console/login/LoginForm.jsp]
Sat Mar 23 06:12:37 2013 <1535513639993579> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Sat Mar 23 06:12:37 2013 <1535513639993579> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Sat Mar 23 06:12:37 2013 <1535513639993579> closeConn: pooling for '10.11.12.231/7001'
Sat Mar 23 06:12:37 2013 <1535513639993579> request [console/] processed successfully..................
Please help me.
Thanks,
ChinnaHi,
First thing are you seeing any request coming to weblogic server? if not then,
What configuration you have added in server.xml and virtual server instance object conf file for weblogic integration.
It is pretty straight forward,
1. add weblogic plugin libproxy_61.so in plugin/weblogic directory on webserver.
2. add WLS cluster server/ standalone server information in server.xml
3. in object file create a new object of type="magnus-internal/directory" add WL specific configuration and then add condition to select WLS object created or make it default object for handling all request.
Thanks,
Ranjan -
How to start weblogic server with non system user
I want to start wls6.1 as an nt service with different user name other than
system.
Thanks
MadhuI have installed weblogic server as an nt service. In install Nt service
cmd, if I make any change in the script, I have to uninstall and install it
again. I do not know where to specify the weblogic.management.username =(Non
system user)
I have created a user name in NT server and added them to Administrator
group. I have also modified in file realm propertes i.e to boot and shutdown
the non system user.
I have to start weblogic server as a non system user.
Thanks
Madhu
I think I replied to some of the questions when I found out the answers.
Only thing I did was hit reply, instead of reply group. Might it went to
persons e-mail. That might be the reason, the answers I posted is not found
in the newsgroup
Thanks
freelance_code_inspector <[email protected]> wrote in message
news:[email protected]..
"m holur" <[email protected]> wrote in message
news:<3bfbafce$[email protected]>...
I want to start wls6.1 as an nt service with different user name otherthan
system.Madhu,
Specify weblogic.management.username={Non system user} in your -D
option. BTW, just curious, have observed that u have been posting a
lot of weblogic questions lately, did u find out the answers? If so, u
should share it back to this community.
Regards
drit
Freelance Java Developer/Code Inspector
http://www.geocities.com/doc_i_t/CodeInspectionService.html -
Can't start WebLogic Server with SP6 and jdk1.2.2 using WebLogic Console
Hi All,
I am trying to install WebLogic 5.1 with SP6 under Windows NT 4.0 with SP6. My goal is to run JSP/Servlets. After going through all the steps described in SP6 Readme I am getting th following exception:
ava.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112)
at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104)
at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53)
at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
at weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1408)
at weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:518)
at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
The installation document is pretty bad intermixing different types of installations. Where can I find steps or what do I need to do to get WebLogic to run with JDK1.2.2 if I want to start it up from WebLogic console only?
Thanks,
Mark.Try rather using the 1.4 version available here: http://java.sun.com/j2ee/1.4/
and use this dedicated forum: http://forum.java.sun.com/forum.jsp?forum=136
-Alexis -
Weblogic server with Websphere Portal server
Hi,
I am having this peculiar problem.
I am using Websphere Portal Server and accessing an application which is running
on Weblogic
6.1. I am also using struts on both the portal server and weblogic server.
The first time I access a jsp which is on weblogic from websphere portal I get
it fine.
I have button on this jsp on submit of which another jsp on weblogic should come
up.
The problem is that on click of the button the URL which is being formed is
<ip of weblogic>/<path of portal server>.
I have no clue why this is happening and its driving me crazy.
Can anyone tell me whats happening?
Thanks
SiriSiri-
This sounds like a URL rewriting issue with whatever proxy or tool you are using
to interface from WS to WLS. Basically, for the setup to work, any URL's that
are contained in the content served up by your WLS instance will have to be rewritten
such that your WS instance knows that the request is actually intended for the
WLS server.
-Brodi
"Siri" <[email protected]> wrote:
>
Hi,
I am having this peculiar problem.
I am using Websphere Portal Server and accessing an application which
is running
on Weblogic
6.1. I am also using struts on both the portal server and weblogic server.
The first time I access a jsp which is on weblogic from websphere portal
I get
it fine.
I have button on this jsp on submit of which another jsp on weblogic
should come
up.
The problem is that on click of the button the URL which is being formed
is
<ip of weblogic>/<path of portal server>.
I have no clue why this is happening and its driving me crazy.
Can anyone tell me whats happening?
Thanks
Siri -
Weblogic server with OIM non-root
Friends,
I am installing OIAM on top of Weblogic Server on CentOSLinux OS .
The problem is i want to install weblogic server and OIAM with non-root so that it does not have security issues.
When i try to install weblogic i am unable to install it with normal user rights in /opt dir it requires root access. As per the document oiam install on top of weblogic should not be a problem but the major issue is running weblogic with non-root.
pls let me know abt install and running weblogic as a non-root user, or a pointer to the documentation.
thank youI have installed weblogic server as an nt service. In install Nt service
cmd, if I make any change in the script, I have to uninstall and install it
again. I do not know where to specify the weblogic.management.username =(Non
system user)
I have created a user name in NT server and added them to Administrator
group. I have also modified in file realm propertes i.e to boot and shutdown
the non system user.
I have to start weblogic server as a non system user.
Thanks
Madhu
I think I replied to some of the questions when I found out the answers.
Only thing I did was hit reply, instead of reply group. Might it went to
persons e-mail. That might be the reason, the answers I posted is not found
in the newsgroup
Thanks
freelance_code_inspector <[email protected]> wrote in message
news:[email protected]..
"m holur" <[email protected]> wrote in message
news:<3bfbafce$[email protected]>...
I want to start wls6.1 as an nt service with different user name otherthan
system.Madhu,
Specify weblogic.management.username={Non system user} in your -D
option. BTW, just curious, have observed that u have been posting a
lot of weblogic questions lately, did u find out the answers? If so, u
should share it back to this community.
Regards
drit
Freelance Java Developer/Code Inspector
http://www.geocities.com/doc_i_t/CodeInspectionService.html -
Want to integrate weblogic server with eclipse
Hi,
I am trying to integrate weblogic with eclipse. so that i can start the weblogic server from my eclipse. can you please give me a point to a location from where i can download the plugin.
And also i want my eclipse to support the j2ee development. what can i do for this. I want my jsps and servelets should work like eclipse default behavior, that is listing the api methods and highlighting the java code.
Please help me by providing a point. I searched with google for considerable time, as i couldn't find out, requesting your help
ThanksSeems Eclipse Galileo doesn't have support for WebLogic 10.3 rather it supports only up to 10.0 of WebLogic Server. Thanks.
-
HOWTO: Monitoring WebLogic Server with Hyperic HQ
For those of you that administer WebLogic Server deployments, you may be interested in this HOWTO - it demonstrates how to get up and running monitoring your WebLogic deployments with Hyperic HQ. HQ auto-discovers WebLogic instances, thus shortening your time to deployment and delivering WebLogic metrics in minutes.
To read the article:
http://support.hyperic.com/confluence/display/hypcomm/Monitoring+Weblogic+with+HQ
Download the open source (GPL) HQ:
http://www.hyperic.com/downloads/other-register.jsp?product=hqfree
Enjoy!
John Markcan any one in the community please help for sorting out this issue.
I have been with this error for a long time. -
Start weblogic server with java argument
Hello,
I am using weblogic server version 10.2. And the environment have one Admin server and two machines.
In admin console, one managed sever is configured with Java argument in "Server Start". The java option can be passed to JVM when i start the managed server in admin console. i confirmed that by execute ps the java process from the linux server. However, the java argument cannot pass to the JVM when i start from command line as below. is there any specific configuration required?
/weblogic/bea102/wlserver_10.0/common/bin/wlscontrol.sh -d premium_102_internet_qa -n /weblogic/ndmgr -c -f startManagedWebLogic.sh -s server_qa_svra START
PLease help!
Thanks,
AngusYou have to use the nodemanager. The parameters are added to a file startup.properties, located in the
directory: <middleware-home>/user_projects/domains/<domain-name>/servers/<server-name>/data/nodemanager
The file startup.properties is used by the nodemanager to start your managed server.
You can start your environment by using a start script (written using WLST), for example,
beahome = '<middleware-hoem>';
adminusername = 'username';
adminpassword = 'password';
domainname = 'domain-name';
linux = true;
pathseparator = '/';
if not linux:
pathseparator = '\\';
domainlocation = beahome + pathseparator + 'user_projects' + pathseparator + 'domains' + pathseparator + domainname;
nodemanagerhomelocation = beahome + pathseparator + 'wlserver_10.3' + pathseparator + 'common' + pathseparator + 'nodemanager';
print 'START NODE MANAGER';
startNodeManager(verbose='true', NodeManagerHome=nodemanagerhomelocation, ListenPort='5556', ListenAddress='localhost');
print 'CONNECT TO NODE MANAGER';
nmConnect(adminusername, adminpassword, 'localhost', '5556', domainname, domainlocation, 'ssl');
print 'START ADMIN SERVER';
nmStart('AdminServer');
nmServerStatus('AdminServer');
print 'CONNECT TO ADMIN SERVER';
connect(adminusername, adminpassword);
print 'START MANAGED SERVER';
start('ServerName','Server');
nmServerStatus('ServerName');
Maybe you are looking for
-
PF calulation wrong in mid month joiners
Dear Experts As per the client requirement PF Contribution on "Eligible pay or PF basis which ever is less" i.e Basic 6500 and Contribution 780/- only. But in case of any one joined in Mid month with basic salary 9000 in this case PF calculation show
-
Poblem with union/union all giving ORA-22950
I am using a select statement with xmlelement to create an xml file. It has bout 5 different unions in it but I only ever bring one row through. I do it like this as then i can use this as one cursor in my plsql without having to create lots of curso
-
My subject pretty much says it all.... right now the cleaned up version is on my iMac, and I want the cleaned up version to override what I have in the cloud, and override what I have on my laptop and iPhone. How do I do this? MobileMe sync was much
-
Link from invoice (VF03) to customer account in FI
Hello Does anybody know whether it is possible to 'jump' from a invoice number (VF03) to the open items for the customer in FI? Thanks in advance Best regards LOGSTOR A/S Søren Kirch
-
Cn=Users domain is not displaying after configuring new object class in OAM
We have configured a custom object class which inherits inetorgperson objectclass and reconfigured OAM. After the reconfiguration cn=Users is not available in OAM Attibute Access Control Management domain selection,Delegated Administration domain sel