Weblogic user not authorized to use announcements
Hi
I have recently installed Webcenter on Windows and am working with Spaces at this point. For some reason I cannot use announcements and discussions. My Spaces home page has the following under the announcement banner:
User is not authorized.
Also when I navigate to administration > configuration > services > discussions I get the following error:
failure to authenticate the user weblogic, due to: Unexpected error occurred, due to : oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client received SOAP Fault from server : SOAP must understand error. Server could not understand one or more SOAP headers : {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security
Everything else seems to be working ok, such as content server, documents etc. I have followed the admin guide regarding the jive set up file and can also connect and see the embedded LDAP server ok using an LDAP browser and connect to the discussions server directly. I have also created a connection to the discussion server which tests ok using the em farm, so everything suggests it should be working ok. To confirm I am using the embedded LDAP server on the WLS admin server, delivered as part of the Webcenter download and I have configured 2 machines on one box with the Admin Server, WC_Spaces and WC_Collaboration all being on the same machine (WC_Host).Can someone please suggest what else I may need to do?
Cheers
Stacy
Hi Stacy,
You probably want to get help for this in the right forum which is WebCenter Portal (https://forums.oracle.com/community/developer/english/fusion_middleware/webcenter/webcenter_portal)
This seems like a config issue. Try the following to resolve the issue. It is from KM Article https://support.oracle.com/epmos/faces/DocContentDisplay?id=1541024.1
Ensure that the WC_Spaces and WC_Collaboration managed servers are running.
Run the following WLST command to attach an OWSM policy on the Spaces Web service endpoint:attachWebServicePolicy(application='webcenter', moduleName='webcenter', moduleType='web', serviceName='SpacesWebService',subjectName='SpacesWebServiceSoapHttpPort', policyURI='oracle/wss11_saml_token_with_message_protection_service_policy')
Run the following WLST command to attach an OWSM policy on the Discussions Web service endpoint:attachWebServicePolicy(application='owc_discussions', moduleName='owc_discussions', moduleType='web', serviceName='OWCDiscussionsServiceAuthenticated',subjectName='OWCDiscussionsServiceAuthenticated', policyURI='oracle/wss10_saml_token_service_policy')
Restart the WC_Spaces and WC_Collaboration managed servers.
Similar Messages
-
Internal Error - User not authorized to use the gross profit module
We have a client who has a limited logistics license and just recently moved to 8.8. in the past he could deliver directly from a pick list but now he is getting an error "User not authorized to use the gross profit module". Is this something related to an authorization setting? Before the move this task was not an issue. Please advise.
Thank you.
ReneHi Gordon, one of our user just experienced the same problem in sales order.
In Form Settings he ticked "Display BP Catalog Number", and while he entered the catalog number he got the same error message.
I'm not sure what this has to do with the gross profit base method...maybe the fields "Gross profit" and "Gross profit base price"? Don't know where to set them up.
Thanks. -
Can't enroll device for user and this user account is not authorized to use Windows Intune.
Hello,
We have SCCM 2012 R2 inegrated with intune via an intune subscription. When I enroll a device with my admin account there are no problems, but when I want to add it with another user account which is a member of the Intune users collection, it can't be enrolled.
When I tested on https://portal.manage.microsoft.com with the credentials of the user I couldn't connect and received the following error: This user account is not authorized to use Windows Intune.
Do I have to do anything in the https://accounts.manage.microsoft.com as there is a checkbox saying Windows Intune. this is unchecked now for all the users even my own account on which I'm able to enroll a device.
Or is this a license problem? I know configuration Manager uses licenses for Intune but where can we track how many licenses are used and how many available? Is there some kind of report available?
I hope someone can help me
Kind regards,
RobbenI added them yesterday and this morning I was still not able to enroll a device with the added user his credentials.
The UPN is correct. Maybe I need to force the DirSync then? Or will one day of waiting be enough normally?
I can see the user in the intune management portal. Does this means it has been synced?
Another thing I noticed is the cloudusersync.log doesn't show them being added? What I was thinking is I first used the all Users collection in the subscription and afterwards I changed it to a specific collection with only the test users. Could it be that
they all synced already and the log doesn't show them anymore?
A warning in this log shows this also:
WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~ at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()
SMS_CLOUD_USERSYNC 23/04/2014 15:02:18 7684 (0x1E04)
I don't know if that has anything to do with this?
this is an extract of that log:
CCloudUserSync::Process - User sync processing thread is now stopping. SMS_CLOUD_USERSYNC 23/04/2014 14:59:42 8144 (0x1FD0)
SMS_EXECUTIVE started SMS_CLOUD_USERSYNC as thread ID 7684 (0x1E04). SMS_CLOUD_USERSYNC 23/04/2014 15:02:15 7572 (0x1D94)
CCloudUserSync::Process - User sync processing has started. SMS_CLOUD_USERSYNC 23/04/2014 15:02:15 7684 (0x1E04)
Starting user sync ... SMS_CLOUD_USERSYNC 23/04/2014 15:02:15 7684 (0x1E04)
WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~ at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()
SMS_CLOUD_USERSYNC 23/04/2014 15:02:18 7684 (0x1E04)
Starting user delta sync, raise failure status messages = True SMS_CLOUD_USERSYNC 23/04/2014 15:02:18 7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:02:19 7684 (0x1E04)
Successfully removed users from cloud 0 SMS_CLOUD_USERSYNC 23/04/2014 15:02:19 7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:02:19 7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:02:19 7684 (0x1E04)
Starting user delta sync, raise failure status messages = True SMS_CLOUD_USERSYNC 23/04/2014 15:07:19 7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:07:19 7684 (0x1E04)
Successfully removed users from cloud 0 SMS_CLOUD_USERSYNC 23/04/2014 15:07:19 7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:07:19 7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:07:19 7684 (0x1E04)
Starting user delta sync, raise failure status messages = True SMS_CLOUD_USERSYNC 23/04/2014 15:12:19 7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:12:19 7684 (0x1E04)
Successfully removed users from cloud 0 SMS_CLOUD_USERSYNC 23/04/2014 15:12:19 7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:12:19 7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:12:19 7684 (0x1E04)
Starting user delta sync, raise failure status messages = True SMS_CLOUD_USERSYNC 23/04/2014 15:17:19 7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:17:19 7684 (0x1E04)
Successfully removed users from cloud 0 SMS_CLOUD_USERSYNC 23/04/2014 15:17:19 7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:17:19 7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:17:19 7684 (0x1E04)
Starting user delta sync, raise failure status messages = True SMS_CLOUD_USERSYNC 23/04/2014 15:22:19 7684 (0x1E04)
Total received users from SCCM to be removed from cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:22:19 7684 (0x1E04)
Successfully removed users from cloud 0 SMS_CLOUD_USERSYNC 23/04/2014 15:22:19 7684 (0x1E04)
Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:22:20 7684 (0x1E04)
UserDeltaSync:- Users Added = 0, Users Removed = 0 SMS_CLOUD_USERSYNC 23/04/2014 15:22:20 7684 (0x1E04)
kind regards,
Robben -
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
Not authorized to use the UME config editor
Hello Experts,
we are running on EP7.0 (ABAP+ JAVA). we used client 100 for UME and it's working fine.
now we have to move UME client from 100 to 120. after doning this changes i am able to login in to the portal but
when logging on to the UME application, we get an error message of 'You are not authorized to use the UME config editor.' and 'error occurred contact your system administrator.
Please guide
Thanks.
Amit
Edited by: Amit Saini on Feb 2, 2008 8:56 AMAmit,
I guess you logged in as j2ee_admin.
"J2ee_admin" user should be assigned to "Administrators" group.
Assign it,logoff and login to the portal again,now try to edit UME properties.
Let me know what happens?
Regards,
Karthick Eswaran -
Own Photoshop CS5.1 installed on two iMacs, when using second iMac, rarely used,got error message ~"not authorized to use program" on this second iMac I have two accounts one in my name one in my wife's both share photoshop...was in my wife's account when I got message...never happened on my primary iMac on which I have my own account and one for guest account that doesn't share photoshop....what is wrong..am allowed to install program on two machines?
Customer Care would have the authority to reset activations. We are basically users such as yourself and can't do this.
Contact Customer Care
Gene -
Watch ESPN - User not authorized error
I'm a U-200 subscriber, I get all of the ESPN channels on u-verse. I recently moved to Kansas City from Chicago, and since the move I haven't been able to access Watch ESPN online. I've tried from my laptop, phone and two different tablets. I just get the User Not Authorized error. Does anyone know how to fix this? I don't have time to spend an hour on hold waiting for tech support.
I'm a U-200 subscriber, I get all of the ESPN channels on u-verse, and also BTN, NBCSN, etc.. I recently upgraded from Internet U-verse only to U-200 and Internet, switching from DirecTV. Unfortunately, when I try to use TV network apps on my iPhone and iPad (like ABC, Watch ESPN, NBC Sports Live Extra, Fox, BTN2Go, etc), after selecting ATT U-verse as my participating TV provider and entering my U-verse credentials, I just get the User Not Authorized error from every single app. Does anyone know how to fix this? I don't have time to spend an hour on hold waiting for tech support, and I am about to switch back to another provider after only three days with U-verse. Examples of errors: NBC Sports Live Extra: "We're Sorry it looks like you're not a subscriber to this channel. Please contact you're provider."ABC: "Error code:400-1. Unfortunately, you cannot access this content. Please contact your TV provider for further assistance."BTN2Go: "User is not authroized to this content."Watch ESPN: "Unable to play video. You are not authorized to play this content. Please contact your provider." Can someone please help??? Talked with two techs who have basically thrown up their hands saying they cannot help. Update on 6/9: So I sent a PM to ATTU-verseCare and quickly got a response from SadathCS. He called me and noticed that when I upgraded from Internet Only Uverse, the database they use to authenticate TV subs on these apps was not properly synched after my upgrade to the TV/Internet account bundle. He forced the sync and it is now working. Thanks SadathCS! issue solved.
-
Hi,
we have FR Studio (client, v. 11.1.1.3.0238 and Report Server v. 11.1.1.3.0.0301) distributed on Citrix terminal server (windows 2003 32-bit) and on latest 2 prod servers we have this error "You're not authorized to use this function. Contact your administrator." appearing.
On QA server FR Studio works fine, we had an issue there when we forgot to set ports
8295-8299 to "listening mode" = they were not defined on FR server's FR_servp.properties config files.
This is also fixed on Prod FR servers and we have double checked firewalls are open.
After adding them to QA FR servers we had no issues with FR Studio on QA, but on PROD the issue still exists.
We have also checked that this shouldn' have anything to do with authentication.
Odd thing is that we get at least partially same sort of error messages on both working and non-working FRClient.log files.
On FRClient.log there are for example following records:
08-04 09:26:11 ERROR ConfigResourceBundle Could not find fr_configcache.properties file
08-04 09:26:11 ERROR SerializableResourceBundle Could not get registry instance
08-04 09:26:11 ERROR SerializableResourceBundle java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
com.hyperion.hit.registry.exceptions.RegistryException: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:158)
at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309).....
Caused by: java.io.FileNotFoundException: C:\Apps\Hyperion\common\config\9.5.0.0\reg.properties (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:151)
... 15 more
08-04 09:26:11 ERROR HRResourceBundleFactory Could not locate registry
08-04 09:26:11 ERROR HRResourceBundleFactory 5500
com.hyperion.reporting.util.HyperionReportException: Server not yet configured. Please configure the server.
at com.hyperion.reporting.config.ConfigResourceBundle.<init>(Unknown Source)
at com.hyperion.reporting.config.ConfigResourceBundle.getInstance(Unknown Source)
at com.hyperion.reporting.config.HRResourceBundleFactory.getConfigBundle(Unknown Source)...
That propably gives already an idea what FR Studio is logging.
Does anyone have idea about this .properties file for frconfig cache?
Should that be defined somehow during system configuration as we don't find that from any of our environments?
Just for additional info:
We have used following packages and installed HFM Admin Client, FR Studio and EPMA File Generator GUI.
• 02. installer - V17382-01.zip
• 03. foundation 1 of 4 - V17397-01.zip
• 03. foundation 2 of 4 - V17369-01.zip
• 04. architect - V17398-01.zip
• 08. financial reporting - V17378-01.zip
• 11. financial management - V17365-01.zip
Patches:
+ hfm_11113_50-p9976978_111130_WINNT.zip
+ financial reporting_11113_20-p9657652_11113_WINNT.zip
During the installation we selected:
Foundation \
Performance Management Architect\Performance Management Architect File Generator
Financial Management\
Financial Management Client
Financial ManagementADM Driver
Financial Reporting\
Financial Reporting Studio Client
I noticed that apparently no configuration was run neither in QA or in PROD, not sure though if FR Studio even requires that? HFM Admin Client does work on all environments Citrix servers.
But in Dev and LAB where FR Studio is working fine - FRClient logs absolutely no recods at all and there we did run configuration to tell which SQL db is on background.
Not sure though whether that config run has any significance for FR Studio.
Sorry for extremely long story, but just in case if anybody has faced similar issues and whether there could be something with Windows server settings I should go and check?
Btw... even adding this fr_configcache.properties manually (to try to highlight FR server name and port) it seems FR Client can't find the file.
Br, MJKDenis,
Thank you for the prompt reply.
>
Denis Konovalov wrote:
> if those reports were saved with security - you're not goingt o be able to open them with Xi3.1 Deski.
Forgive me for my mundane question but what does saving with security mean?
Thanks -
" User not authorized" error while deploying webdynpro application on WAS
I am getting following error while deploying dyn pro application on WAS
Error
May 17, 2005 6:37:21 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[002]Deployment aborted
Settings
SDM host : DYNPRO
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/720359/LOCALS1/Temp/temp50603PVTOSAP.ear
Result
=> deployment aborted : file:/C:/DOCUME1/720359/LOCALS1/Temp/temp50603PVTOSAP.ear
Aborted: development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [DYNPRO] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
Additional Log :
May 17, 2005 6:37:21 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[002]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7162 - 630_SP]/>
<!NAME[D:\usr\sap\DYN\DVEBMGS00\SDM\program\log\sdmcl20050517131312.log]/>
<!PATTERN[sdmcl20050517131312.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
May 17, 2005 6:43:12 PM Info: -
Starting deployment -
May 17, 2005 6:43:12 PM Info: Loading selected archives...
May 17, 2005 6:43:12 PM Info: Loading archive 'D:\usr\sap\DYN\DVEBMGS00\SDM\program\temp\temp50603PVTOSAP.ear'
May 17, 2005 6:43:14 PM Info: Selected archives successfully loaded.
May 17, 2005 6:43:14 PM Info: Actions per selected component:
May 17, 2005 6:43:14 PM Info: Update: Selected development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08' updates currently deployed development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.09.04.27'.
May 17, 2005 6:43:15 PM Info: Error handling strategy: OnErrorStop
May 17, 2005 6:43:15 PM Info: Update strategy: UpdateAllVersions
May 17, 2005 6:43:15 PM Info: Starting: Update: Selected development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08' updates currently deployed development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.09.04.27'.
May 17, 2005 6:43:15 PM Info: SDA to be deployed: D:\usr\sap\DYN\DVEBMGS00\SDM\root\origin\local\PVtoSAP\LOKAL\0.2005.05.17.18.37.08\temp50603PVTOSAP.ear
May 17, 2005 6:43:15 PM Info: Software type of SDA: J2EE
May 17, 2005 6:43:15 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
May 17, 2005 6:43:15 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
May 17, 2005 6:43:15 PM Error: Aborted: development component 'PVTOSAP'/'local'/'LOKAL'/'0.2005.05.17.18.37.08':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [DYNPRO] with user name: [J2EE_ADMIN]
Check your login information.
Exception is:
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
May 17, 2005 6:43:17 PM Error: -
At least one of the Deployments failed -Hi Abhijeet,
1. Execute the remoteGUI
<<Installed drive>>:\usr\sap\J2E\JC00\SDM\program\RemoteGui.bat
2. Click the "Connect to SDM server" (Menu "SDM GUI --> Login")
3. Give the hostname (DYNPRO) and port (50018)
4. Enter the password and click login.
Check whether you are able to login or not. If you are not able to login through the RemoteGUI, then the password might be wrong. Check the password.
Regards,
Santhosh.C -
Not authorized to use UME application
Greetings, we have installed the Solution Manager 4.0 on AS ABAP+Java. The installation and post install completed successfully. We updated the SP6 to SP7. During the post installation, we performed a client copy using 001 as our source client i.e. 001 -> 100. Per note, 937323, we followed the required steps to change the assignment of Java part to another client, 'Changing the AS ABAP Backend System'.
Now, when logging on to the UME application, we get an error message of 'You are not authorized to use the UME config editor.' and 'You are not assigned to this application'.
Please advise. Thanks.Hello Jack,
I am configuring SOLUTION MANAGER 4.0 based on WAS 7.00 UNICODE on Windows Server 2003 X64 and MAXDB ver 7.6
I have the same problem, how did you solve it ?
Did you have a problem with Visual Administrator Version ? I have the following situation:
When I launch de VA the error message is:
=== Error Message ====
Warning: Visual Administrator version is older than the version of J2EE Engine kernel.
Visual Administrator version: SP6
J2EE Engine version SP8
=== End of Error Message ====
Question: Do you where can I find the Update and how to update Visual Administrator ?. -
User not authorized for message processing
Hi,
I have a SM59 connection from SAP PI --> SAP R3.
Targethost sapr3T.mydomain.
Path prefix: /sap/xi/engine?type=entry
Process: From PI send a message to R3 (scenarie is a Server Proxy...)
User: PIPROXY has Role SAP_XI_APPL_SERV_USER
This is not enought I get error "User not authorized for message processing" when trying the connection from my PI server. (I tried with SAP_ALL and then it works)
What would be the right user role for this operation ?
Br,
MartinHi all,
I have the same problem in a XI -> BW scenario (Abap proxy).
I get error "User not authorized for message processing" when try to send message from PI to BW.
(I tried with SAP_ALL and then it works)
User: PI1REMOTE has Role SAP_XI_APPL_SERV_USER and SAP_XI_IS_SERV_USER
What would be the right user role for this operation ?
Thanks
Daniele -
RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED
Hi Gurus,
I am working on 3.5 version. Got the following error messages while trying to retrieve data from Cube.
RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED
RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_
RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GE
Data cannot be seen in the report too.
However, PSA displays the data. The request is also green.
This is related to authorizations. Can anybody help?
Points assured.
Thanks.Run Su53 and check the authorization for the user that is getting this error.
Also, check for all the obejcts in the cube, whether any of them are marked "authorization relevant". If so and if you have authorization objects created on them, and have a variable on that characteristic and if values are maintained for that variable, make sure the user who is getting this error has value in that variable.
Ravi Thothadri -
System error - User not authorized to access requested Info Object!
Hi, Experts,
I have a user ID begin with S***, but when I click some links, the following message shows:
"System error - User not authorized to access requested Info Object!"
How could I have authorization to see these links?
Thanks!
LorrieHi Lorrie,
If you are a superuser, you should not get this error.
If not, you can not change any autohorizations.
Check it out. For your job, you have to be a super user.
Thanks,
Gordon -
System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED 0SAL_DS01 0S
Hello
I have a big problem, I a have active the ODS 0SAL_DS01 with the update rule 0CRM_SALES_ACT_1.
I have upload the data without problem.
When I want to see the data I have this message :
Your user master record is not sufficiently maintained for object Sales Org
System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED 0SAL_DS01 0SAL_DS01
Can someone help me please?
Regards.
FarchidHi Farchid,
You need auth for the SalesOrg Auth object that is securing this ODS. In RSSM, you can enter 0SAL_DS01 in the check for InfoProvider box and then click display. You should see a check mark against this auth object for SalesOrg. Makre sure that you have the related role assigned to your ID.
Hope this helps... -
Blue Screen. Your explorer set top is not authorized for use.
07/25/14Your explorer set top is not authorized for use. Please call 1-800-266-2278. Calling doesn't work, I select tech support (#1) and the phone does not recognize it. The blue screen with the words explorer set top is not authorized for use has come on the screen quite a few times in the last 3 months, but the TV seems to correct itself. But today it doesn't.
Hi lyraele, reviewing your account I am seeing poor upstream signal issues that are likely causing your video issues. Please follow JayInAlg instructions and I will private message you to schedule a technician if you are still having issues.
Thank you
Maybe you are looking for
-
Size of Text Messages differ in different S40 phon...
Hi, I am using Nokia 5130 XpressMusic phone. Previously I have used Nokia 5310 and 6303i and X3. The problem is all these phones shows different messages sizes in (Kb): Phone Model 160 Character Msg 765 Character Msg 906 Character Msg Size Link Size
-
Where does SSO information gets stored in Apps 11i
Hi, I installed Oracle Apps 11.5.10.2. This has been further integrated with Oracle Single Sign On server (Oracle iAS 10.1.2.0.2). Does any one know where does the SSO infrormation gets stored in Apps, i.e. is there any table which stores these detai
-
Adobe shape images not appearing in CC library
PLEASE HELP - I am trying to find a way to resolve this basic thing. After all that's the whole point of this right. Tried Adobe chat support who kept me on hold for over an hour - Getting so frustrated can someone please please help. Market download
-
Unable to deploy dictionary DC
Hi experts, I am getting following error while deploying the Dictionary DC. I made changes in one database table (changing field length, added new columns). It got builtr successfully but deployment is giving errror, hence aborted. This is the trace
-
Please help. I was in the internet and all if a sudden computer froze. Now I can't get it to start up. Tell me I have to install an operating system. Computer is new. Is there someone I can call?