Weblogic User Unable to Login to BIP
Hello Guru's,
I came into a shop shortly after that had installed and configured both OBIEE & BIP. Our version is 11.1.1.6.2.
We can log into either OBIEE or BIP successfully with out own usernames, all of which have administrator rights. However, with the "weblogic" username, we can only log into OBIEE and not BIP. If we try to access BIP content from the OBIEE catalog it prompts for a login, and will not accept weblogic.
HAs anyone run into this before an/or does anyone know what might be happening? I'm relatively new at the security side of things, so even if you can point me in the right direction of where to start troubleshooting that would be greatly appreciated.
Thanks much!
Adam
Also don't duplicate your thread
User unable to login even after password reset
Close one of them please .
Similar Messages
-
issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login
issue with cisco acs 4.2.Users unable to login aaa client but after restarting group policy able to login
-
Hello Guys,
exchange 2007 SP3
windows 2008 r2
we have one user who unable to login to owa with error -"The user name or password that you entered is not valid. Try entering it again."
we checked mailbox feature in EMC and owa is enable
checked adsiedit - looks good
we checked allow inheritance - checked
we reset the password and try to login to owa from exchange server , no luck
user can login to her computer and outlook without any issue
we also moved her mailbox to another server
user facing the same issue from office and VPN
any suggestion ?
Thanks
Sandip
sandipHello Lynn
thanks for the reply. but I already checked that and allow inheritance already checked .
when user unable to access webmail with error "The user name or password that you entered is not valid"
will it generate any event id on exchange server or domain controller ?
in our case we have mailbox and CAS on different servers
any suggestion .
Regards
Sandip
sandip -
Why are new directory users unable to login to iChat/jabberd?
I have a couple of new users I've added to our directory recently. They are unable to connect to our internal jabber (iChat) server. Users that have connected previously are experiencing no difficulty.
A quick overview of the layout of the system: two XServes, one is OD primary (aspen) the other is OD replica and iChat server (vail). I've modded some config files (long ago) to allow user IDs for jabber to be [email protected] instead of [email protected] It works quite nicely.
Excerpt from the logs shows a failed login attempt followed by a successful login attempt. Successful logins are happening from Messages (beta), iChat under Snow Leopard, and Pidgin under windows. Failing logins are all from iChat under Snow Leopard. Please ask questions, I'm happy to add any other pertinent data!
May 3 16:21:45 vail jabberd/c2s[99718]: [13] [::ffff:10.255.170.122, port=52584] connect
May 3 16:21:47 vail jabberd/c2s[99718]: [13] [::ffff:10.255.170.122, port=52584] disconnect jid=unbound, packets: 2
May 3 16:22:19 vail jabberd/c2s[99718]: [13] [::ffff:10.255.170.121, port=51608] connect
May 3 16:22:19 vail jabberd/c2s[99718]: od_auth_check_service_membership: checking user "jwells" access for service "chat"
May 3 16:22:19 vail jabberd/c2s[99718]: od_auth_check_service_membership: mbr_check_service_membership returned 2
May 3 16:22:19 vail jabberd/c2s[99718]: od_auth_check_service_membership: no access restrictions found
May 3 16:22:19 vail jabberd/c2s[99718]: [13] legacy authentication succeeded: host=ourcompany.office, username=jwells, resource=JWells’ Computer
May 3 16:22:19 vail jabberd/c2s[99718]: [13] requesting session: jid=[email protected]/JWells’ Computer
May 3 16:22:19 vail jabberd/sm[99716]: session started: jid=[email protected]/JWells’ Computer
Looking for any and all assistance. Thanks much!!Tim, thank you for jumping in! I was afraid this question was going to languish.
Snow Leopard is indeed listed twice. It is listed once as being successful as our existing users are able to login to the jabber service from there. It is also listed as being the sole operating system from which logins are failing as our new directory users are only using that platform.
Only one machine is using Lion and that's the one using the Messages Beta and that's working just fine. I provided all of the client information, but I don't believe it's truly relevant. I'm pretty sure that the issue is on the server side. ...I just have NO idea what the problem is! -
Hi,
I have tried all documentations possible on this subject but cannot make the AD users login. I configured a new realm as per Paul Cannon's blog successfully. Configured AD and brought in required users and groups successfully. I have "DefaultAuthenticator" as the primary one. AD is second in line. "virtualize=true" option is set. I am able to login using WL id but not my AD id.
1. If I remove "virtualize=true" option, I am not able to login with either WLS userid or AD user id.
2. attribute settings are sAMAccountName. Proof that it is working correctly is because I can see the login ID's of AD users in my Users/groups.
3. I have not deleted the BISystemUser from WLS but matched passwords for both from EM.
4. system.user I changed password to match with AD's bissytemuser.
5. Global admin role added for bisystemuser
Operating System is AIX. Does that make a difference?
I also notice that I am not able to login to RPD in online mode.
I notice that when I try to add bissytemuser to any role( any AD user to any role), it gives me java exception lang errors.
I see this error in bi server log:
oracle.webservices.provider.ProviderException: javax.xml.ws.WebServiceException: BI Security Service Access Denied - credentials supplied in SOAP Message header failed authentication
I want to keep AD as the secondary authentication provider and still make it work. Could someone help me out please? Been struggling to make it work inspite of so much documentation and following all steps in those documentations.
Thanks,
DanI tried step by step exactly as per his blog. I recreated AD Authenticator just now and I can see all users/groups in console. I added the username.attr and user.login.attr to sAMAccountName and virtualize=true. Restarted entire stack. I am able to add AD groups to roles but not the users. I get java.lang.NullPointerException. I click Close and choose the MSAD bissytemuser to add to bissytem role, I cant. It keeps giving me this java error. I tried creating a new role and tried to add the user to it,same issue.
Is it mandatory to delete the BISystemUser from WL authenticator? the system.key has the same username and pwd as in AD.
I am on the verge of giving up Any more ideas/troubleshooting or should I raise an SR with Oracle?
This is what the entire error message say:
java.lang.NullPointerException
java.lang.NullPointerException
#{viewScope.emas_pagemodel_security_EditAppRole.searchPrincipal}: java.lang.NullPointerException
javax.faces.FacesException: #{viewScope.emas_pagemodel_security_EditAppRole.searchPrincipal}: java.lang.NullPointerException
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:118)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:103)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1086)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:434)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(AccessController.java:310)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: javax.faces.el.EvaluationException: java.lang.NullPointerException
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
... 67 more
Caused by: java.lang.NullPointerException
at oracle.sysman.emas.model.security.DialogAdminBean$1.compare(DialogAdminBean.java:567)
at java.util.Arrays.mergeSort(Arrays.java:2874)
at java.util.Arrays.mergeSort(Arrays.java:2886)
at java.util.Arrays.mergeSort(Arrays.java:2886)
at java.util.Arrays.mergeSort(Arrays.java:2886)
at java.util.Arrays.mergeSort(Arrays.java:2886)
at java.util.Arrays.mergeSort(Arrays.java:2886)
at java.util.Arrays.mergeSort(Arrays.java:2886)
at java.util.Arrays.mergeSort(Arrays.java:2886)
at java.util.Arrays.mergeSort(Arrays.java:2886)
at java.util.Arrays.mergeSort(Arrays.java:2886)
at java.util.Arrays.sort(Arrays.java:3251)
at java.util.Arrays.sort(Arrays.java:3269)
at java.util.Collections.sort(Collections.java:1966)
at oracle.sysman.emas.model.security.DialogAdminBean.fetchPrincipals(DialogAdminBean.java:563)
at oracle.sysman.emas.pagemodel.security.identity.EditAppRolePageModel.searchPrincipal(EditAppRolePageModel.java:496)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
... 68 more -
Unable to login into BIP using IIS/Oc4j
Hi ,
we have configured SSO in OBIEE using IIS. and to configure oracle proxy for OC4J followed the steps at below url.
http://gerardnico.com/wiki/dat/obiee/iis
But getting the error when trying to browse the ulr
http://localhost/xmlpserver/login.jsp
Error: Internet Explorer cannot display the webpage
any suggestion plsWhen I try:
http://localhost:9704/xmlpserver/
it direct me to BIP login page
http://localhost
Under Construction
The site you are trying to view does not currently have a default page. It may be in the process of being upgraded and configured.
Please try this site again later. If you still experience the problem, try contacting the Web site administrator.
If you are the Web site administrator and feel you have received this message in error, please see "Enabling and Disabling Dynamic Content" in IIS Help.
To access IIS Help
Click Start, and then click Run.
In the Open text box, type inetmgr. IIS Manager appears.
From the Help menu, click Help Topics.
Click Internet Information Services.
http://localhost:9704
It direct me to welcome page for OC4J
any help please..
when I try
http://localhost/xmlpserver/login.jsp
get the error please find the log:-
12/06/12 13:36:22: [op_uri_map.c (129)]: Into op_uri_map_t::uri_map_alloc
12/06/12 13:36:22: [op_uri_map.c (163)]: Into op_uri_map_t::uri_map_open
12/06/12 13:36:22: [op_worker_list.c (37)]: op_worker_list_init: propfile=c:\proxy\proxy.conf p=0x010D4A60 l=0x010D24C0
12/06/12 13:36:22: [op_worker_list.c (45)]: op_worker_list_init: numservers=1
12/06/12 13:36:22: [op_worker_list.c (57)]: op_worker_list_init: inside loop, serverlist[0]=ias1
12/06/12 13:36:22: [op_worker_list.c (73)]: op_worker_list_init: hostname=hrlvmdv1281.emea.hays.loc
12/06/12 13:36:22: [op_worker_list.c (82)]: op_worker_list_init: port=9704
12/06/12 13:36:22: [op_worker_list.c (160)]: op_worker_list_init: tablesize=3
12/06/12 13:36:22: [op_worker_list.c (169)]: op_worker_list_init: lookuptable[0]=/xmlpserver/*, servlist[0]=ias1
12/06/12 13:36:22: [op_worker_list.c (169)]: op_worker_list_init: lookuptable[1]=/xmlpserver oproxy.ias1.urlrule=/bioffice/*, servlist[0]=ias1
12/06/12 13:36:22: [op_worker_list.c (169)]: op_worker_list_init: lookuptable[2]=/bioffice, servlist[0]=ias1
12/06/12 13:36:22: [op_uri_map.c (193)]: op_uri_map_t::uri_map_open, rule map size is 3
12/06/12 13:36:22: [op_uri_map.c (266)]: Into op_uri_map_t::uri_map_open, match rule /xmlpserver/=hrlvmdv1281.emea.hays.loc was added
12/06/12 13:36:22: [op_uri_map.c (266)]: Into op_uri_map_t::uri_map_open, match rule /xmlpserver oproxy.ias1.urlrule=/bioffice/=hrlvmdv1281.emea.hays.loc was added
12/06/12 13:36:22: [op_uri_map.c (301)]: Into op_uri_map_t::uri_map_open, exact rule /bioffice=hrlvmdv1281.emea.hays.loc was added
12/06/12 13:36:22: [op_uri_map.c (313)]: Into op_uri_map_t::uri_map_open, there are 3 rules
12/06/12 13:36:22: [op_uri_map.c (340)]: op_uri_map_t::uri_map_open, done
12/06/12 13:36:22: [op_isapi_plugin.c (765)]: initialize_extension, success!
12/06/12 13:36:22: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:22: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:22: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:22: [op_isapi_plugin.c (553)]: HttpFilterProc [] is not a proxy url
12/06/12 13:36:22: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:22: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:22: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:22: [op_isapi_plugin.c (553)]: HttpFilterProc [] is not a proxy url
12/06/12 13:36:22: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase
12/06/12 13:36:22: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase
12/06/12 13:36:23: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:23: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:23: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:23: [op_isapi_plugin.c (553)]: HttpFilterProc [pagerror.gif] is not a proxy url
12/06/12 13:36:23: [op_isapi_plugin.c (459)]: Start of HttpFilterProc
12/06/12 13:36:23: [op_uri_map.c (363)]: Into op_uri_map_t::map_uri_to_host
12/06/12 13:36:23: [op_uri_map.c (443)]: op_uri_map_t::map_uri_to_host, done without a match
12/06/12 13:36:23: [op_isapi_plugin.c (553)]: HttpFilterProc [pagerror.gif] is not a proxy url
12/06/12 13:36:23: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase
12/06/12 13:36:23: [op_isapi_plugin.c (566)]: HttpFilterProc ==> SF_NOTIFY_LOG phase -
AD provisioned user unable to login in Domain
Hi Friends,
I have created a user in OIM 11g and provisioned to AD.
When I try to login to AD domain. It is not allowing to login.
Dose the user need have any permissions for it ?
plz help me in the regard.
Thanks
SriFirst check in you AD if the user account was really created or not and secondly can you please post the error you are getting while trying to login.
SB -
Creative Cloud User - Unable to login to Story Plus and access my stuff.
I was in story plus all day yesterday. My account is up to date. Now I am redirected to upon login to Story Free, even when I go to the adobe story plus page and click the login button. Help!
Hi,
please clear your browser cache and try to login again.
If this does not work, please send a mail to AdobeStory-Support at adobe dot com mentioning the id you are using to login in to Story. We will check the details from the backend and try to solve the issue.
Thanks
Aurobinda -
I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help
Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.
-
User having all authentication but unable to login in planning why ?
user having all authentication but unable to login why in planning ?
You might need to give some more details.
For example, what kind of provisioning in shared services, under what groups if any, what kind of dimension level access in planning etc? -
I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable. -
Unable to login any user id first time in the Adobe content viewer (R25)
Hi,
I am using R25 Adobe content viewer. The problem is that I am unable to login any user id first time. when I do 2nd time with same id then it do successfully. Please suggest.
DC PubThis is a known issue with the v25 Adobe Content Viewer. It is fixed with the v26 version, which is currently awaiting approval from Apple. If you have a Pro or Enterprise subscription to DPS, you can build a custom Adobe Content Viewer.
-
Unable to login to caralog manager online with adminstrator user
Hi Gurus,
I am unable to login to catalog manager online with administrator user. I get error as
'access denied for user to path /.'
I think this is because of catalog migration from dev to test.
What do i need to do so that i could login to catalog manager online with administrator?
Please advice
ThanksHi,
When the catalog is moved from Dev to Test/prod permissions are not copied. The users are part of the system folder (i.e Catalog Manager > Users > Properties > Owner Account = System Account), which is why Catalog Manager does not transfer the permissions.
I guess that is the reason you were able to run the reports from dev and not from test/prod. To have them work you might need to refresh GUID's check the Oracle note [ID 1467256.1].
1. Stop the Presentation Server.
2. Backup the instanceconfig.xml file at [middleware_home]/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml
Under the 'Catalog' section, add the 'Recover' tag. For Example:
<Catalog>
<UpgradeAndExit>false</UpgradeAndExit>
<UpdateAccountGUIDs>Recover</UpdateAccountGUIDs>
</Catalog>
4. Start the Presentation Server. It will perform a recovery and then after some time shutdown.
5. Remove the tag.
6. Start the Presentation Server again.
Let me know if this helped.
Regards,
Jay
Edited by: Voltaire on Nov 19, 2012 11:59 AM -
Syntax to get the login user who is generating the BIP report
Hi,
I need to display the user who is executing the BIP Report. I hav used the following syntax, but it displays blank.
<?xdofx:xdo_user_name?>
Can someone please provide the syntax?Hi
To connect the project professional with Project server and publish the project plan on server user need to have Project manager permission on PWA.
How to connect :
Open Project Professional from All program --> File --> Managed
Accounts -->Add you PWA URL (till PWA) --> Select the option Choose an account --> Save then close
Now open MS Project professional again it will ask you to connect to computer or PWA select PWA then you can start the Work.
You need not to get worry about LOGIN and user name , MPP will take Windows login of the user from Computer/laptop whoever
will be log in to system.
http://www.epmcentral.com/msp2010/pjserveraccount.php link is having Step by step image which will help you
kirtesh -
Unable to login to Java Desktop Environment with new user
Hi
I have created a new user in my Solaris10 x86 using the command
#useradd nama
I added the passwd to the user, using passwd.But when i am trying to login through GUI(Java Desktop Environment) i am unable to login.
After giving username and password , again its showing the login screen itself.
But i am able to login with root permissions.
Could anyone help me .
Thanks inadvance.use this workaround, as root edit /etc/auto_home and /etc/auto_master and comment out all the configuration and reboot the machine. then use useradd utility to add your normal users.
# useradd -d /export/home/user1 -s /usr/bin/bash -m user1
HTH
Maybe you are looking for
-
Anyone have experience in Oracle's Manufacturing Scheduling?
Can anyone tell me whether Oracle's Manufacturing Scheduling provides an effective way to schedule complex manufacturing operations and roughly what it costs? Our company, PlanetTogether, provides multi-user, add-on production order constraint-based
-
Trying to understand auto adjustment
Hello, I'm using CS2 and some time ago I read (I don't recall where) that one should generally start at the top of the adjustment panel and work down when adjusting a RAW file: i.e. start with Temperature then do Tint; do Exposure before Shadows and
-
A popup message when i double click a packagebody
hi, i get a problem when i use the sqldeveloper 3.0, usually when i double click a packagebody and there will be a popup message: the connection is busy.try again? is it the expected alert? Thanks.
-
Fetching multiple records from a cursor
Hi all! I am kind of stuck and am not able to understand how to get out of this. please help me. here is what I have to do. I have a change log which has a record for each attribut changing in a table. Of all the changes, we are interested in a few,s
-
Iphone 5 coverflow issue!
I just synced my iPhone to my new laptop and added an album I had on my laptop, now when I go onto the phone all my album artwork had disappeared from my album list apart from this new album id added but then when I turn my phone on the side for cove