Weblogic Windows Service Won't Start

Hi there,
We have a server with Weblogic installed. After a restart one day the beasvc.exe service hung when the server came back up and now it won't start. Weblogic is currently running in Consol mode and runs without issue. Can you someone give me instructions on how to troubleshoot the Service start of beasvc.exe and what may have caused it please?
Kind Regards

Hi,
You can try to start your service using the debug option which should give you the error on the prompt if any, following is the command to start the service in a debug mode
WL_HOME\server\bin\beasvc.exe -debug "SVC_NAME"Where:
WL_HOME= Is the path where Weblogic server is installed say something like c:\bea\weblogic92
SVC_NAME = That's the name of the service. The best way is to right-click the service which you have created in the services.msc panel and select properties then copy the Display name of the script and then paste it in the "SVC_NAME".
Regards,
Ravish Mody

Similar Messages

Windows Services won't start

Has anyone had the problem of tempting to startup Windows services only to not have it start at all? Am looking for any input.
Thank you

Thank you for the info.
I enabled the disk through Workgroup manager and it still won't start.
That is correct,Samba.
Below is the error:
smbd version 3.0.10 started.
Copyright Andrew Tridgell and the Samba Team 1992-2004
[2006/02/20 22:59:53, 0] /SourceCache/samba/samba-92.15/samba/source/lib/utilsock.c:open_socketin(724)
bind failed on port 445 socket_addr = 0.0.0.0.
Error = Address already in use

Windows Services won't start [10.4.7]

Did the usual update method to my 10.4.2 server.. (repaired permissions, ran the combo updater, repaired again) and everything seems to be working except Windows File Sharing which will not start.
Checking the logs I see
--log.smbd--
[2006/07/20 10:01:49, 0] /SourceCache/samba/samba-92.20/samba/source/smbd/server.c:main(789)
smbd version 3.0.10 started.
Copyright Andrew Tridgell and the Samba Team 1992-2004
[2006/07/20 10:01:49, 0] /SourceCache/samba/samba-92.20/samba/source/lib/utilsock.c:open_socketin(724)
bind failed on port 445 socket_addr = 0.0.0.0.
Error = Address already in use
and in --log.nmbd-- about a million entries as soon as I start the service
[2006/07/19 09:24:32, 0] /SourceCache/samba/samba-92.9/samba/source/nmbd/nmbd.c:terminate(56)
Got SIGTERM: going down...
[2006/07/19 09:25:50, 0] /SourceCache/samba/samba-92.9/samba/source/nmbd/nmbd.c:main(668)
Netbios nameserver version 3.0.10 started.
Copyright Andrew Tridgell and the Samba Team 1994-2004
[2006/07/20 09:22:10, 0] /SourceCache/samba/samba-92.9/samba/source/nmbd/nmbd.c:terminate(56)
Got SIGTERM: going down...
[2006/07/20 09:23:33, 0] /SourceCache/samba/samba-92.9/samba/source/nmbd/nmbd.c:main(668)
Netbios nameserver version 3.0.10 started.
Copyright Andrew Tridgell and the Samba Team 1994-2004
Any ideas what could be going on here?
Thanks,
James Nierodzik

don't know if you already have this solved, but try using a default smbd.conf file in your /etc/ folder. if the windows services start then it is something in your configuration that must have been changed between the 10.4.7 and 10.4.2 updates.
you can slowly start adding pieces of your configuration back in or just rebuild it if your configuration is not too complicated.
if using a different config file doesnt work then seeing the issue with binding to the port makes me think that there is already another version of samba running on the server.

Password service won't start

Following an unplanned hard restart of our server (Mac OS X 10.9.5, Server 3.2.2), the password service won't start, so our staff can't log into mail, calendars or file sharing.
When I launch Open Directory, the main window has the message "Unable to load replica list", then it switches itself off after a minute or so.
I've looked at the certificates in Server and they have the green tick so presumably are OK.
DNS is working OK and running the command "sudo changeip -checkhostname" reports success.
Here's the section of log that repeats every few seconds as PasswordService repeatedly starts up and exits:
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService[5890]) Exited with code: 1
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:02.540 xscertd[249]: Failed sending LookupCRLByCARecordName command to com.apple.xscertd.helper: The operation couldn’t be completed. (com.apple.certificateserver error 42005.)
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd[5894]) Exited with code: 1
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd) Throttling respawn: Will start in 7 seconds
13/03/2015 20:55:10.206 xscertd-helper[5897]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper[5897]) Exited with code: 1
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject loadXMLData]: Unable to locate passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject saveXMLData]: ldap_modify_ext_s of the passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.684 PasswordService[5901]: int pwsf_GetPublicKey(char *): ldap_search_ext_s cn=authdata for Public Key returned -1
13/03/2015 20:55:10.687 com.apple.launchd[1]: (com.apple.PasswordService[5901]) Exited with code: 1
I have backups (both Time Machine and clones of the hard drive) that I could use to restore the corrupted bit of the configuration, if necessary, but I don't know what to restore.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname.
5. Only if you're still running Mavericks server, follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

Can't Update to 10.0.1, Bonjour Service Won't Start--PLEASE help!

All I want to do is update my iTunes but I cannot. It won't work from within iTunes, and when I try to do it manually it said "The Service Bonjour Service" won't start." In Services, I could not start it either, though I am admin.
So I deleted Bonjour (from within the Control Panel), thinking that'd take care of it, but it did not. I still get ALL the same messages. I even tried re-installing Bonjour (bonjour64.msi), and I get the same "won't start" message. It's not my firewall--I set that to always allow.
What is going on here? I've searched and searched, but to no avail (though they are plenty of Bonjour problems out there), and I really don't want to uninstall/reinstall iTunes, if that would even do it. I'm new to Apple, and this just makes no sense to me.
Please, help?? THANKS in advance~

There are remants of Bonjour in the program files, and I guess I could delete these to clean it up, but I doubt that would make the difference.
Actually, that could make a difference. If there is leftover componentry from the previous version still on the PC when the new version tries to install, the version mismatch could cause trouble with the new service starting. That could then roll back the attempted install.
There's a bunch of different stuff on 64-bit systems for BonJour (there's both 64-bit and 32-bit componentry stashed on a 64-bit system. We'll also try a cleaner version of an uninstall than the Apple instructions provide.
In Computer, open your C drive (or whichever drive your program files are installed on).
Open the "Program Files" folder.
Right-click on the "BonJour" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your program files are installed on).
Open the "Program Files (x86)" folder.
Right-click on the "BonJour" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
Right-click on the dnssd.dll and dns-sd.exe files (if they still exist), and select "Delete".
Go back into the "Windows" folder.
Open the "SysWOW64" folder.
Right-click on the dnssd.dll and dns-sd.exe files (if they still exist), and select "Delete".
Empty your recycle bin.
Restart the PC and try another BonJour install. Any better luck restarting the service this time?

NSM3 service won't start anymore

Hi,
NSM AD 3.0.4 on W2008R2
has been running fine for months, now engine service won't start anymore.
engine.log from todays start:
01 2012-12-13 11:19:19 7200 1 0001 1452 1480 ML: Failed to initialize 1
or more components and/or subsystems. Engine is switching to
stop-pending state.
ideas?
sk

Sami,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Microsoft Forefront Server Protection Eventing Service won't start?

Hi Guys,
When Forefront Protection for Exchange was integrated/enabled on our SBS 2008 server, Microsoft Forefront Server Protection Eventing Service won’t start. Even when we try to start it manually we are getting this message (see attached). During this attempt,
we got these events in the event viewer. In this case, in order to have our email working, we have to temporarily disable Forefront. Any suggestion how to fix this? Please advise.
Event 465
Source: ESENT
FSCEventing (9324) Corruption was detected during soft recovery in logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log. The failing checksum record is located at position END. Data not matching the log-file
fill pattern first appeared in sector 450 (0x000001C2). This logfile has been damaged and is unusable.
Event 301
Source: ESENT
FSCEventing (9324) The database engine has begun replaying logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log.
Event 454
Source: ESENT
FSCEventing (9324) Database recovery/restore failed with unexpected error - 501.
Event 1076
Source: FSCEventing
The Forefront Protection Eventing Service has stopped.
Thank you very much!
Arnel

Hi Arnel,
Based on error messages, it indicates a log file (inc.log) has become corrupted. Please restore the log file
from a backup copy, and then check if this issue can be solved. For more details, please refer to the following article.
Event Id 465
Hope this helps.
Best regards,
Justin Gu

Windows service question (automatic start?)

Is there a setting in OSX server that tells the box to start a specific service automatically if the machine is rebooted, specifically Windows service? When we reboot, Windows service does not start automatically.
Thanks!

/System/Library/StartupItems/Samba/Samba is a startup script that starts SAMBA, which provides the Windows file sharing. The script checks the entry in /etc/hostconfig for SMBSERVER to say yes, and if it does starts the daemons (smbd and nmbd).
Roger

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Web services won't start - error 100002

Hi there
I have done a freash install of Leopard Server 10.5.4 and updated to 10.5.8 on an Xserve G5. Added a 2nd web site (in addition to default) and now web services won't start returning the error:
A service has encounted an error.
Try to refresh the view (mysever.com/Web)
(Could not start web service - details in error log.)
100002
Below is in the error log for both web sites:
Syntax error on line 1310 of /private/etc/httpd/httpd.conf:
Invalid command '<Proxy', perhaps mis-spelled or defined by a module not included in the server configuration
The following is a Console Message:
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3[4682]) Exited with exit code: 1
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3) Throttling respawn: Will start in 10 seconds
Any pointer of how to solve this would be appreciated.
Cheers, Paul

Thanks for the reply. line 1310 is <Proxy disabled_proxy>
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
<Directory "disabled_proxy">
Allow from example.com
Order Deny,Allow
Deny from all
</Directory>
<Proxy disabled_proxy>
Allow from example.com
Order Deny,Allow
Deny from all
</Proxy>
</IfModule>

Windows 7 Won't Start Up from Boot Camp

I got a new 21.5" iMac and set up a boot camp partition for a Windows 7 64-bit installation. It worked. I installed the latest boot camp drivers into the Windows 7, which was wonderful because it fixed the display to match my iMac's specs. Then I installed the latest Parallels 5 and had it recognize that Windows 7 system, and have been using it without problem. But I tried this evening to use boot camp to start up the Windows 7 system by itself and although I got a choice of Mac OS or Windows via the option-startup process, and selected the Windows startup, Windows 7 won't start up that way. I just get a black screen with a blinking white horizontal line in the upper-left corner. I keep waiting but it never gets past this. Tried turning it off and starting again, still no luck. Booted back into Mac side and Parallels VM of the installation still works.
Any help appreciated. I should still be able to boot into Windows 7 straight using boot camp, no?

I should add that I just installed 8GB of RAM to the 4GB the iMac came with. Possibly now that the total machine has a 12GB of RAM the Windows 7 system is confused and can't start up?

11g DB Control service won't start on Win XP Pro

Hi all,
In installing my 11g database, the DB Control service won't start so the database config fails prior to doing the EM stuff. The system event viewer says:
The OracleDBConsoleorcl11p1 service terminated with service-specific error 2 (0x2).
Querying further, I find the following:
SERVICE_NAME: OracleDBConsoleorcl11p1
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1066 (0x42a)
SERVICE_EXIT_CODE : 2 (0x2)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
Researching the error code 1066 simply says it is a vendor-specific error code. Anyone out there ever come across such a thing?
Cheers,
Jim Greetham

Jim,
Were you able to figure out the problem why you were getting 'service specific error occurred:2'?
I have the same issue.
DB version: 11.1.0.6.0
OS: Win XP (latest patches and updates applied)
The database and other pieces are working just fine.
Thank you,
Taj

Windows service doesn't start at boot

When our Xserve starts up, the Windows service does not start.
I've got SMBSERVER=-YES- in /etc/hostconfig.
Once the xserve is running, clicking on the Start Service button for Windows in Server Admin starts the service with no problems. Once it's running, it's fine. The server has no other problems that I'm aware of.
Any suggestions would be greatly appreciated.
Xserve Mac OS X (10.4.6)

I have exactly the same problem. Did you ever find a solution?

Oracle Home Agent service won't start

OracleOraHome90Agent service won't start on Win XP Home Edition. Was working fine. Installed Sun Webserver 6.1 and started facing problems. So uninstalled webserver and even then the Oracle Home Agent service starts and stop immediately. the oracle database service and the listener starts without any issues. Any help appreciated.

XP Home Edition is not certified for Oracle9i Database but according to the information given by you, that service was functioning well. Perhaps the new software that you installed is consuming a lot of resources regarding the virtual memory of the machine and maybe for that the services is not starting.
I recommend you to increase the virtual memory of your machine and try again.
Joel Pèrez
http://otn.oracle.com/experts

Windows 7 won't start.

I have a mac pro and use to boot camp to use windows 7. Windows 7 won't start and it's stuck in a loop. How can I prevent windows 7 from booting and get snow leopard to boot?
thanks for your help!

Hi,
reboot your Mac while holding down the Alt/Option key to get a Selection Screen on which you can choose to boot into OSX.
Once in OSX go to System Preferences - Startup Volume and set your OSX to be the default.
Regards
Stefan

Weblogic Windows Service Won't Start

Similar Messages

Maybe you are looking for