Weblogs using IP and not domain

We figured out how to set up weblog user names and we got a domain set up for the server, but when one of the users puts a category in, it defaults to the internal address. Is there anyway to fix this?

I am using Xserve. I checked with someone else and they thing it is a domain problem. Here is an example page for you. If you click on a category, you will see it trys to go to an internal address. All of the IPs have domains linked to them, internal and external.
http://tigers.bcacs.org/weblog/cadams/
I will look around in the other forum. Don't go by what the thing says for my OS, it doesn't have Xserve on it.

Similar Messages

  • Using NULL and NOT NULL in prompted filters

    Dear all,
    While trying to grap the concept of prompted filters in sap bo web intelligence, I had a question whether why we cannot use NULL and NOT NULL while creating a prompted filters in our report.

    HI,
    'Is Null' and 'Not Null' are the predefined functions in webi which only eliminate the null values or considering only null values.
    'Is Null' and 'Not Null' are itself predefined functions that why you are not getting  prompts.
    Null values are standard across the databases so this is defined  as a function in webi to specific eliminate the null values.
    If something is not standard then there is option in the webi to use different operator with static values or with prompts.
    More more information on Null see the Null wiki page.
    Null (SQL) - Wikipedia, the free encyclopedia
    Amit

  • How can I get my data from a old iPad to a new iPad using iCloud and not iTunes

    How can I get my data from a old iPad to a new iPad using iCloud and not iTunes

    Restore from the iCloud backup - assuming that you were backing up to iCloud in the first place. If you weren't using iCloud for backup - then you are out of luck.
    If you were backing up to iCloud - you have to erase all contents on the iPad in Settings>General>Reset>Erase all content and settings - before you can restore from the iCloud backup.
    Read this article before you do anything else
    http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/

  • I can't log in the App store because an from Zambia which is not listed in Apple outlets. How do i go around this as apple products are using globally and not only in the listed countries. My product is a Mac book pro.

    I can't log in the App store because am from Zambia which is not listed in Apple outlets. How do i go around this as apple products are used globally and not only in the listed countries. My product is a Mac book pro. i feel this limits how i can use my product

    Unfortunately you have taken an Apple product outside of the area where Apple currently does business. There isn't legally a way around this. Apple cannot license apps to you where you currently live.

  • When I click on the converted PDF in my downloads, I receive a message saying'invalid format' Could that be because I use 'Pages' and not 'Word" If so, how can I convey PDF's to Pages?

    When I click on the converted PDF n my downloads, I receive a message saying 'invalid file format'.
    Could that be because I use Pages and not Word?
    If so, how can I convert my PDF's to Pages so I can modify the documents?

    Hi Kathy,
    I'm not very familiar with Pages, but I did just read on Apple's website that it does import .docx files. What happens when you open Pages, and then choose File > Open to open the .docx files?
    Best,
    Sara

  • Is there a way to do a spelling quiz in captivate using images and not questions as reference.

    Is there a way to do a spelling quiz in captivate using images and not questions as reference. Specifically i want have blank lines underneath an image, where the user looks at the image and types the correct letters to fill in the blank. For example a picture of a dog, with this _ _ _ underneath for the user to fill in, or in some cases perhaps having them fill in the vowel like so "d_g".I must have audio with this , as the students will be able to listen to the audio sound out the word phonetially to help them be able to type it!
    Appreciate any advice! Cheers!

    Hello everybody!
    This widget is great!! Thank you for that!!
    I searched for something like that earlier and made an other workaround:
    http://forums.adobe.com/message/1912430#1912430
    The Javascript did not work in my test. I brought to the "if you reach this slide" feature but it failed.
    Regards,
    Markus

  • Cluster with shared domain folder using OCFS2 and the domain /tmp folder

    I've setup a cluster with two machines and one managed server on each machine. One of the machines also hosts the admin server.
    Initially, both managed servers were running on the same machine. Everything worked well. When I move to having two machines, I didn't want to have to independently maintain the domain folder on each machine.
    So I decided to setup a shared drive between the machines and use OCFS2 to share the domain folder between the two machines.
    Everything started up fine, but when I deployed software to the server I would frequently (but not always) get this error:
    [wldeploy] Target state: deploy failed on Cluster cluster-01
    [wldeploy] weblogic.management.DeploymentException: [Deployer:149189]Attempt to operate 'deploy' on null BasicDeploymentMBean for deployment mylibrary#[email protected]. Operation can not be performed until server is restarted.
    After looking around a bit on google I saw this issue:
    http://download.oracle.com/docs/cd/E11035_01/wls100/issues/known_resolved.html#CR279281
    which says
    Some OS and NFS combinations result in deployment failures or configuration updates with an exception like:
    weblogic.management.DeploymentException: Attempt to operate 'distribute' on null BasicDeploymentMBean
    Workaround or Solution:
    * Run statd() and lockd() processes on every NFS client that accesses a remote NFS volume.
    * If multiple servers that share the same domain root are started with different user Ids of same group, set the correct "umask" for the server processes so that a file created by one server can be opened for read/write by other servers without security exceptions.
    Unfortunately, I wasn't running NFS, so the workaround didn't help me.
    Through dump luck, I tried this:
    I replaced the domainroot/tmp folder with a symbolic link to a folder on each machine's local filesystem. Following that change my deployments work everytime.
    Does anyone know why this change worked? What is the purpose of the /tmp folder in a domain folder?
    Are there any switches I could turn on to get more information about the exact error that causes the deployment mbean to come back null?

    It may not be the same situation, but I had this "deployer:149189" error and it turned out to be mixing WLS 10.0 and 10.3 installations together in the same install directory and not being scrupulous about environment setup. I think the problem was caused by accidentally running a 10.0 domain with Java 1.6.
    Eoin.

  • How do I use CreateBookmarksFromGroupTree and NOT guid in the name for my top level?

    Post Author: Barbdcg
    CA Forum: Deployment
    I have a report that I have created that uses uses groups and I wanted export a PDF using the CreateBookmarksFromGroupTree option. While that works, I get an ugly top level bookmark name that starts with the name of my report, then followed by a GUID;
    Report {49E72CC5-7FFD-44F8-831B-EA8F543F7D82}.rpt
    So, how do I Put in a name of my own choosing as the top-level bookmark or at least get rid of the guid?
    Any help or suggestions would be appricated.
    Thanks,
    Barb

    Post Author: Barbdcg
    CA Forum: Deployment
    Still no answer??? I can not figure this one out!!  HELP!!!

  • If I turn off iMessages on my iphone 5 and only use SMS, I am hoping this will this stop ALL my messages going to partners ipad? I only want 2 use SMS and not have any of my messages go to partners ipad so dont want to alter ipad settings.

    My situtation is this, my soon to be ex previously set up an ipad with both our numbers and we share a linked itunes/icloud account so if my phone is off he gets all my messages via his ipad that I DO NOT have access to his ipad at ALL. I can't set up my own itunes account (not yet until I leave him) otherwise he will know I am leaving him and it will cause major problems. So I was hoping that if I turn off iMessages on my iphone 5 and just talk to my family via SMS and NOT touch his precious ipad mini, that he wont be able to get my messages anymore and if I turn off iCloud storage and back up as well on my iphone only. Is this correct? Its just a temporary solution I am hoping. I have searched for days and hours and I just cant find this answer anywhere....
    Do I HAVE to turn off my phone number off or delete it on his ipad? I am really hoping I can just do this at my own end and not touch his ipad in anyway or have to change my itunes id YET. Once I leave him shortly, I will create a whole new ID etc.  I just wanna know if I can do this myself on my iphone only. Please any experienced help would be greatly appreciated. Thank you so very much.

    mazwig wrote:
    I just want to know if I turn off iMessages and iCloud Back up, and ONLY use SMS myself and my family just SMS's me - and do this on my PHONE ONLY and not touch his ipad (so he doesn't know), if he will get any of my messages I send or receive on his ipad please. Its just a temp thing and I just want to take action myself on my own phone and want to know if this will work. Does anyone know?
    SMS messages will not go to the iPad Mini. It's not capable of receving them. If you have access and can do it without it causing a problem, remove your iPhone from the Apple ID Support profile:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "Edit Products"
    Click on the "X" to the right of the product.
    Click "Unregister"
    If anyone in your family uses iMessage, they will go to both you and your boyfriend unless you do that.
    To be completely safe, you may want to simply use an alternate message app such as Skype, Viber, Whatsapp (assuming everyone has a smartphone) until the issue is resolved. Google Voice will also allow you to send and receive texts to another number on your phone.
    Best of luck.

  • Mail.jar is locked when sending a mail using servlet and not releasing

    Hi everybody,
    The mail.jar is locked in tomcat while sending the first message and not released until the tomcat get restarts.
    the problem is not recorded in any logs.
    1. Please create a servlet that sends mail
    2. Send a mail to any mailid
    3. then after the mail is send please try to delete the mail.jar or please deploy the same servlet again with some small changes (for redeploying take place only a few changes is there - please change any strings a little bit)
    then try to send mail using this servlet will not send mail becoause it will not redployed correctely.
    when i removed Transport.send(msg); from code it works fine. but ??
    please help me to recover from this issue. i don't want to turn on tomcat antiJarlocking and antiresourcelocking to true, becaouse this craete many other problems.
    please help me to recover from this issue.
    Thanks,
    Prasad.N

    hi friend
    I am using advanced version of jdk. i i have used many other jar files like mysqlconnector, logging, commonhttpclient, etc.... the only problem is with mail.jar. that locks are released when its use completed, but the lock holds until tomcat shutdown in mail.jar.
    what may be the reason?
    Thanks,
    Prasad.N

  • Bug Report: Images broke when using get_blob_file_src and not authenticated

    Hi,
    it looks like that images which are retrieved with a
    apex_util.get_blob_file
    call are broken when the user is not authenticated. If the generated image URL is directly called in the browser, it shows a 404 Not found error with a "Invalid Session" in the error log file on the Apache.
    The above image URL is generated when using the apex_util.get_blob_file_src function call. If the new IMAGE format mask (eg. in an IRR) is used it seems to be fine, because that generates a apex_util.get_blob call.
    Testcase:
    1) http://apex.oracle.com/pls/otn/f?p=17201:3 (That's the sample application with page set to "doesn't need authentication")
    -> Image column is broken
    2) Login with demo/patricks_demo_workspace
    3) Go again to page 3 (Products)
    -> Image column is displayed correctly
    Thanks for looking into that
    Patrick
    Oracle APEX Essentials: http://essentials.oracleapex.info/
    My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

    Hi Scott,
    when I woke up today it also came into my mind that it may has something to do with the referenced P6_PRODUCT_IMAGE in the
    apex_util.get_blob_file_src('P6_PRODUCT_IMAGE',p.product_id)call which references a page item on a non-public page.
    I think apex_util.get_blob_file_src or better apex_util.get_blob_file shouldn't really care if the "definition" of how the BLOB looks like and where to read the information from is on a non-public page. Because it doesn't read or set actual data it just reads the definition, so it shouldn't be a security issue.
    Another question is, if it's so useful to reference a page item to get this BLOB information and not directly being able to specify this information as parameters in the apex_util.get_blob_file_src call. I think I also raised that during the 3.1 beta, because in case if you just want to display a BLOB you still have to create somewhere a page item of type "file browser" to being able to reference it in the get_blob_file_src call. Direct passing of the vales would also be more transparent and self documenting.
    BTW, the above code is an example of the "Sample Application" and wasn't made up by me, so probably a lot of people are using this technique to get rid of there own blob download procedures.
    Have a nice weekend
    Patrick
    Oracle APEX Essentials: [http://essentials.oracleapex.info/]
    My Blog, APEX Builder Plugin, ApexLib Framework: [http://www.oracleapex.info/]

  • Why is it better to use Proxies and not adapters

    When I connect 2 systems via XI, i can use proxies (if supported by the external systems) or adapters.
    The general view of SAP is that I should use (JAVA or ABAP) proxies where possible, and not adapters.
    Why are these "better" than file adapter or idoc adapter (monitoring, error handling, performance, ?????).
    thanks,
    Jan

    As received from SAP :
    Proxies support both Synchronous and Async. Connectivity - ALE/IDOC is only Async.
    Proxies don't use standard IDOCS, but what you decide to use in the proxy def. on SAP side.
    Proxies are only supported on 6.20 onwards.
    I would use IDOC adapters for standard IDOCS - and if no ABAB knowledge is available for maintenance.
    If there is a standard ALE scenario available - I would use it (eg. Masterdata replication).
    If ABAB is already extensively used in the organisation and they are running 6.20+ - I would use proxies.
    I would always prefer proxies for Synch. Communication - instead of RFC (if running 6.20+).

  • Iphone 6 is using airtime and not any of my 488MB of data I have...?

    My phone has been using my airtime for about two weeks now and not any of my data. I have 488MB on my phone but it has not changed at all. once my airtime runs out everything obviously gives errors saying cannot load.

    Your question and description is not very clear to me, so hopefully something here will help:
    1. Gmail is a service not an app or a place. So you need to access the service with an app - that can be iPhoto, Mail, Outlook or any other mail client, or even a Web Browser like Safari or Firefox.
    So you can't "go to GMail" as you write, but instead you go to an application set up to use the GMail service.
    2. iPhoto is not a mail client. It's a handy way to email pics to Grandma, but for what you're doing you need to use an app that supports all of the Gmail service. iPhoto doesn't. There is no way around that.
    3. How to send to groups will vary depending on what app you use to access the GMail service. All of these apps can receive photos from iPhoto, either - as in the case of Mail and Outlook, via the Share function - or, in the case of all the rest - via a Media Browser.
    For help sending to Groups using any of these other apps you need to ask omn their respective forums. But the workflow is quite simple:
    Using Mail or Outlook set in the iPhoto Prefereneces:
    1. Select the pic(s) you want to share.
    2. Choose email from the Share function
    3. Make your selections re size etc
    4. The email opens up in Mail or Outlook
    - from there you need to figure out how to use the email client.
    Using any other app:
    1. In the mail app create a new email
    2. Click on the Attach button or link
    3. Use the Media browser to select the pic(s) you want to send
    4. Attach them
    - from there you need to figure out how to use the email client.
    For help accessing your photos in iPhoto see this user tip:
    https://discussions.apple.com/docs/DOC-4491

  • Modify Transition element in work flow using for and not attributes to restrict access

    Hi,
    I have TFS 2013 for my premises and I am working on changing the work flow for TFS work item. I have created a work item as per requirement and it has 3 states
    Active, In Review and Closed in work flow. When developer creates a work item it is in Active state and later it is sent to In Review and then to close after successful review.
    My question is I want development team to be restricted to move the work item to Close state. At present when developer creates a new work item they see Active state. At this point they can not see any other states in the work item. Later they
    fill the details and after checkin they will put that work item to In Review state. At this point they can see Active and In Review states. When they save this work item and modify it again they see Close state as well. I want to design the Transition element
    in work flow in such a way then developers should not be able to see the Close state at all in a work item assigned to them. Only reviewer should be able to transit the work item from In Review to Close.
    I checked the for and not attributes in the transition element but I have no idea about correct syntax I should use to enforce the restriction. I would also like to mention here that I have no separate groups defined in my TFS server. Every
    one is a part of contributor's group. There is no specific group of reviewers and one developer reviews the code of another. I want to design the work flow in such a way that the developer who creates (or gets assigned) the work item should
    not be able to put their own work item in Close state but they should be able to close another developer's work item if that work item has his name in the reviewer's box.
    I have tried to simplify my question by elaborating it hope it is not complex to understand. Let me know if you want further clarification on this.
    Regards, Premal Acharya

    Hi Premal,
    For your scenario, seems the "for" and "not" attributes not are unavailable to make it happens. Because of the developers not in groups, and the same type of work items can be assigned to all the developers hence the attributes cannot
    be allow and deny users in the groups concurrently. Please check the
    page for more information about transition xml element.
    Based on your situation, you can separate the development group and test group. Then you can only allow test group to change the state.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Call Webservice using REST and not SOAP

    Hi, I am looking for an example of calling (invoking) a webservice from the database using PLSQL. The webservice is using REST rather than SOAP and returning XML
    I have already got examples of how to call a webservice using SOAP but not for REST
    Regards
    Ash

    Using Fiddler while loading your WSDL in a browser, I can see that the WSDL is using HTTP Chunked encoding. You should configure JBoss to return the WSDL without chunked encoding.

Maybe you are looking for