WebMail error after enabling Secure SMTP

I enabled SSL for POP, IMPA and SMTP. Mail clients are working fine. So using SM's conf.pl, I enabled SSL for both IMAP and SMTP settings. When I send an email from SquirrelMail, I get this error:
Connection refused
Server replied: 61
Could not make anything out of log files. IMAP is working fine for SquirrelMail. But SMTP is playing funny...
Appreciate any help.

Note, from the squirrelmail conf.pl itself:
"If your SMTP server is localhost, you can safely disable this."
Which is how I had it. However, I just tested enabling ssl for smtp within squirrelmail, and it works for me. Port is not changed in the squirrelmail config.
But you -do- need to enamble SMTP authentication.
./conf.pl
Option 2,
then option B
and configure your SMTP auth settings. Using CRAM-MD5 for example.

Similar Messages

Getting error after enabling the Transaction in SSIS package in Windows Server 2008 R2 Standard machine

Hi,
I created a package with "Execute SQL Task and Data Flow Task". I am able to execute successfully in my server having
"Windows Server 2008 R2 Standard" Operating System.
But after enabling the Transaction in my SSIS Package I am not able to execute it. It is giving error. The same package is running in my local machine with Transaction enabled on
Windows 7 Operation System.
The error which I got in my server after enabling the Transaction is
"The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D025
"The partner transaction manager has disabled its support for remote/network transactions.". End Error "
I search with this error message in google and found some solutions in the following links
http://social.msdn.microsoft.com/Forums/en-US/7172223f-acbe-4472-8cdf-feec80fd2e64/the-partner-transaction-manager-has-disabled-its-support-for-remotenetwork-transactions
http://technet.microsoft.com/en-us/library/cc753510(WS.10).aspx
http://support.microsoft.com/kb/817064
But none of the above solution is not working. Kindly help me to resolve this issue.
Thanks in Advance.
Sridhar

Hi Sridhar,
Please compare the DTS settings on the Windows 7 computer and the Windows Server 2008 R2 computer and make sure they are identical. Make sure the “Allow Inbound” and “Allow Outbound” options are check, and pay attention to the authentication mode as
well.
Besides, make sure both Distributed Transaction Coordinator (TCP-In) and Distributed Transaction Coordinator (TCP-Out) rules in Firewall are enabled.
If the issue persists and there are any security/anti-virus software, temporarily disable the security/anti-virus software and check the issue again.
Regards,
Mike Yin
TechNet Community Support

Error while "Enabling Security for Oracle Management Service"

Hi,
I have installed OEM 10GR1 on Solaris 9. I am using 9.2.0 database for repository.
My first installation of OEM and agent went smoothly, and everything was working fine.
Then, I tried to follow configurating security for Grid Control Framework. I got following error:
/oracle/app/oracle/product/10gEM>cd bin
/oracle/app/oracle/product/10gEM/bin>./emctl secure oms
Oracle Enterprise Manager 10g Release 10.1.0.3.0.
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root Password :
Enter Agent Registration password :
Enter a Hostname for this OMS :
Checking Repository... Done.
Checking Repository for an existing Enterprise Manager Root Key... Done.
Generating Enterprise Manager Root Key (this takes a minute)... Done.
Fetching Root Certificate from the Repository... Done.
Generating Registration Password Verifier in the Repository... Done.
Generating Oracle Wallet Password for Enterprise Manager OMS... Done.
Generating Oracle Wallet for Enterprise Manager OMS...Missing /oracle/app/oracle/product/10gEM/sysman/wallets/oms.uxtora1/ewallet.p12
:/oracle/app/oracle/product/10gEM/bin>
Please help.

Thanks for response. I had temp space full issue with repository database. After bouncing database, the temp tablespace became empty, and the secure operation went smooth.

Getting error after enabling php in httpd.conf

Hi,
I want to get php enable on the Apache web sever that is part of OS 10.6.1. I read the docs and uncommented the Load line for php in httpd.conf. Then I restarted the web server. Now when i try to access via Safari a phpinfo( ); command as part of a simple .php file, I get the following error:
Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
Fatal error: Unknown: Failed opening required '/Users/mobilemojo/Sites/phpinfo.php' (include_path='.:/usr/lib/php') in Unknown on line 0
Is there something else that has to be modified to get php module to load?
Thanks in advance!
K

Hi Sridhar,
Please compare the DTS settings on the Windows 7 computer and the Windows Server 2008 R2 computer and make sure they are identical. Make sure the “Allow Inbound” and “Allow Outbound” options are check, and pay attention to the authentication mode as
well.
Besides, make sure both Distributed Transaction Coordinator (TCP-In) and Distributed Transaction Coordinator (TCP-Out) rules in Firewall are enabled.
If the issue persists and there are any security/anti-virus software, temporarily disable the security/anti-virus software and check the issue again.
Regards,
Mike Yin
TechNet Community Support

Error after enabling lifetime on XML FORMS.

Hi all,
Ive created my article (XML FORMS) that was working fine. However, after add the lifetime properties (validfrom, validto) into the form, a message error Resource cannot be displayed with XMLResourceRenderer is showed when a new article is created. Does anyone know what could going wrong?
Any help will be appreciated,
Alcides Flach

Hi Alcides,
   In this folder, where you have created these xml files by mean form builder, do you have other kind of documents not created with form builder ?
   If you create other folder and then within it you create xml documents (form builder) after that display them using KM Navigation iview with a suitable layout set, do you have the same problem ?
   Have you tried to restart this server ?
   At last, you can enable debugging settings option in System Administration->System Configuration-KM-CM-User Interface-Settings-Advanced Options-Debuggings Options-edit and enter you user-id. After that refresh you browser.
   After that, when launch km navigation iview you are going to see a renderer link.
   Try with this link:
   https://www.sdn.sap.com/irj/sdn/thread?threadID=110919
Patricio.

JDBC Driver errors after installing Security Update 04-2007

After installing the latest security update for 10.4.9, My JDBC driver is no longer working. I'm running PHP & Mysql as a localhost for dev and I know that both are running but are not speaking to each other. I use SQL4X Manager to manage my DB and that can't access MySql. I have the same set up at work with out the security update installed and everything is working great which let me to believe that the security update muck'd something up. Anyone else have the same problem?

Can't help with the airport problem, since I don't do wireless. As for backing up, these should get you pointed in the right direction:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html
Since you're a newcomer to the Mac, peruse these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac, and
MacTips Learning Centre.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides, and
A guide for switching to a Mac.

Error installing Adobe Flash 11 "launchfail" after enable AppLocker

Error installing Adobe Flash 11 "launchfail" after enable AppLocker please help. I have allow everyone from publisher for .exe and .msi

I'll ask around, but I don't have any experience with AppLocker. Have you gone through all of the documentation here?
http://technet.microsoft.com/en-us/library/dd723678(v=ws.10).aspx

Unable to enable security and create admin user after reset - px4-300d

Our px4-300d became inaccessible a few days ago. I couldn't get to any shares from any machine, and I couldn't get to the admin console. When I checked the unit, there was no indication that anything was wrong (ie - the panel didn't show any failure, I didn't get any emails indicating a failure, and there were no lights offering a clue to what was wrong). However the unit was completely frozen...the buttons on the front would not scroll through the different information on the panel.
I attempted to reset the device using the pinhole on the back, but the device wouldn't respond, so I had to power it down using the button on the front. When I tried to power it back up, it would come on for about one second, then immediately power off. I pulled all 4 drives out and powered it on again without any drives. This time it came up completely and I got a message on the panel that drives were missing. I started putting the drives in one at a time and the device recognized them all and I was able to login to the admin console. However, all the shares were missing and I received an email that the Storage Pool was degraded. I rebooted the device from the admin console and when it came back up, it started reconstruction. After a few hours, it completed, but I still had no shares and couldn't create any new shares. I also did not see any of my users, including the admin account I was logged in with. I tried to create a new user, and also tried creating a user I knew existed and neither one worked. The screen would just flash but nothing would show up. At this point, I decided to try to reset using the pinhole on the back of the device to reset the admin user so I could just create a new one. So, now I'm stuck at the 'Enable Security' screen. Every time I try to create an admin account, it just flashes and returns me to the same 'Enable Security' window.
Now what?
Solved!
Go to Solution.

If you are unable to get into it you will not be able to do the factory reset. You can try booting in buy removing one disk at a time. If you are still unable to then tech support should be able to supply you with the imager and try flashing it. I would keep it at 4.0.8 also,

After enabling iCloud, the calendar on my MacBook shows a window stating "moving calendar to server account. Then a box appears saying "server responded with an error message 403. Then another box shows "couldn't move calendar to iCloud, an error occurrre

After enabling iCloud, the calendar on my MacBook shows a window stating "moving calendar to server account. Then a box appears saying "server responded with an error message 403. Then another box shows "couldn't move calendar to iCloud, an error occurrre

iCloud's Calendar is full of errors and problems for me. The "Couldn't move your calendars to iCloud because an error occurred" is now gone (by itself) but nothing syncs between my Mac's Calendar to iCloud or my iPhone to iCloud.
I tried creating a new event directly on iCloud.com to see whether it pushes to any of my device and got this "This event couldn't be created because of a server error; please try again." error.
Apple, please fix this!!

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message

Trying to record the school band using Garage band and a Pevey PV14 USB. Have connected the mixer to the Mac using a standard USB lead (is that a problem) but after enabling multitrack option we get the error message
'Can't enable track for recording. Input channel already in use.'
What are we doing wrong?
Thanks

skim this tutorial:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqrecordmultipletracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

Error after deploying vShield Data Security

After i installed vShield Data Security still have the status "Not installed" in vshield manager, i can see that the VM is up but i don't know why vshield manager don't see it when i tried to install it again i have the following error:
vShield Data Security installation encountered error while installing service VM:Internal server error: Host is not prepared

Hi,
     Always try to start with Uninstall option(clicking the “Uninstall” button).Irrespective of the results please do follow below steps.
1)Remove the vmservice-vswitch that was created during the install (assuming there is no other device that uses this vswitch). This is a service vSwitch with no physical adapters that was created during the install. This will have 2 port groups, one called vmservice-vmknic-pg and the other vmservice-vsheild-pg.
2)Remove the 169.x.x.x address given to the Net.DVFilterBindIpAddress property for the host. Select the ESX host on the left hand side tree, on the right hand pane select the Configuration tab and click on Advanced Settings under Software. In the Advaced Settings page look for the Net section and select it. Scroll all the way down and then make your way up until you find Net.DVFilterBindIpAddress = 169.254.1.1. Remove the 169.254.1.1 and click OK
3)Either reboot the VCNS appliance or
           Go into the vShield Manager console/SSH and restart the web-manager component:
            Manager#no web-manager
             Manager#web-manager

Windows 7 sysprep errors after security updates to be IA compliant

After installing security updates to remain IA compliant I am unable to run sysprep on my Windows 7 VM's and our hardware images.
It is NOT rearm.
Log:
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x2 setting SDDL on driver file C:\Windows\system32\igfxsrvc.exe!
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x2 setting SDDL on driver file C:\Windows\system32\igfxtray.exe!
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x2 setting SDDL on driver file C:\Windows\system32\DRIVERS\Accelern.sys!
2012-06-20 09:56:25, Error                 SYSPRP SPPNP: Error 0x3 setting SDDL on driver file C:\Program Files\STMicroelectronics\AccelerometerP11\stdcfltn\stdcfltn.cab!
2013-06-20 11:51:04, Error                        [sysprep.exe] UnattendFindAnswerFile: Explicitly provided unattend file [C:\windows\system32\sysprep\unattend.xml]
does not exist.
2014-03-27 13:48:30, Error                 SYSPRP WindowsSideShow: Failed to get task folder (0x80070003)
2014-03-27 13:48:30, Error      [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\System32\AuxiliaryDisplayClassInstaller.dll,WindowsSideShow_Sysprep_Generalize', returned error code 31
2014-03-27 13:48:30, Error      [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 31
2014-03-27 13:48:30, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize internal providers; hr = 0x8007001f
2014-03-27 13:55:57, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2014-03-27 13:55:57, Error      [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f
2014-03-27 15:16:24, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31
2014-03-27 15:16:24, Error      [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f

It is not that. Based on other posts I have found that if I delete this key HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\Sysprep\Generalize, value {b3257dc1-2617-6667-6a6f-2fe2739a2b89} sysprep works fine. Does anyone know the risks
of deleting this key?

What do I do after I got an error after trying to download the security update?

What do I do next when I got an error after trying to download the security update?

Thank you for providing these details. It makes helping you much easier.
You have a 16GB iPad, but have only 2.4GB available. This is likely contributing to the issue. This amount, 15% of the iPad's storage capacity, is the minimum free space you should have. But when updating iOS, you should expect the new version to use somewhat more space than the old. I believe going to Settings > General > Usage and freeing space will help with your issue.
Another recommendation would be to use iTunes on your computer to do the update instead of over-the-air.
I believe either one of these would help you. Both would be at least as good.

Flash 9,0,124,0 security error after upgrade

I get the following error after upgrading my Flash Player
(after my system prompted me to install it while running the Flash
editor):
Internet Explorer has blocked this site from using an ActiveX
control in an unsafe manner.
I have uninstalled and reinstalled the player from the
browser, about 5 times now and it continues to be a problem for IE.
Works ok in Firefox if I manually download the FF installer. Is
there a standalone installer for Vista/IE7 or am I forced to use
the ActiveX installer which seems to have issues?

Fix: Removed both (!?more than one?!) versions of flash
player in my Programs and Features dialog, then ran
uninstall_flash_player.exe, reset IE7 to factory spec, then
reinstalled Flash from ActiveX. Seems to be working now.

"Could not sign in. Unknown error." on my apple tv after enabling two-step verification

I am unable to sign into my apple tv after enabling the two-step verification. Any ideas would be helpful. Thanks.

Just finished with a factory reset. Everything works now. I don't really understand the two step verification though. I was not asked to supplement my password with a code when logging into the apple tv.

WebMail error after enabling Secure SMTP

Similar Messages

Maybe you are looking for