Webmaster e-mail addre
Well you turn your back for just 3 months and they give you a spiffy new forum. Hooray for e-mail notifications!
Anyway I was wondering if there's a way to e-mail the webmaster of Creative's site. The European one has an incorrect list of cards (AFAIK anyway) in the support section, which confuses people looking for drivers. I can't see a webmaster contact anywhere on the site?
Hi Jason - it's the product list on the driver downloads page (and support e-mail form). Having gone to the UK site, and reading the message underneath the downloads:
"Are you getting the most accurate information? For resources and information tailored to your region, be sure to visit the Creative website that serves your area. Choose your country now."
... you'd think you'd get a list containing only the cards that were actually released in the UK. However the Audigy section lists things like the Gamer and MP3+ - IIRC the American releases - and the Digital Entertainment - IIRC the Asian one. The UK version of this product was called the Audigy Player. You're also listing a "Sound Blaster Audigy" - I don't remember any product actually called that though.
Also check the Li've section - the Gamer and MP3+ variants were again American, and the DE Asian. We had the Player 024 and Player 5. (I think...) AFAIK the Platinum releases were the same in each territory.
Similar Messages
-
I have never been able to use the Macmail feature. Running OSX 10.4.11, and the problems appear to be related to the fact that when I originally registered my computer with apple, I used an old e-mail address which is now defunct. Have since upgraded the e-mail address in account manger, but it still locks me out and rejects my user name and password when I try to log in. It seems it established an account for me automatically when I first fired the beast up, but now the Macmail program is uncooperative with me. Any assistance would be much appreciated, Thanks
Hi rbcjoker76, and a warm welcome to the forums!
Sounds like some needed System Fonts wre replaced by bad ones. Y also have Font Book in Applications for validating fonts & checking for duplicates.
Required Fonts from 10.3, much the same in 10.4...
http://support.apple.com/kb/HT2444?viewlocale=en_US
You may have to get Pacifist...
http://www.charlessoft.com/
then intall the Fonts what you need from your Install Disk.
Or do a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings. -
BT E-mail account will not remember my E-mail addr...
I recently switched from Hotmail to BT Yahoo mail. I use Google Chrome as web browser and have stored my BT E-mail address in the Auto-fill settings. I have also ticked box which says keep me signed in. Despite this I still have to type my E-mail address manually every time. Is this is a fault on my computer or in BT's software?
One possible explanation - have you changed a setting in Chrome to delete all cookies on exit? I know Firefox has such a setting, and I guess Chrome would as well.
-
Someone else opened an Account with my e-mail addr...
Somehow someone from Saudi Arabia opened an account with my e-mail address. I am located in the United States and have no idea who this person is. I was attempting to open a new account and my e-mail had already been used. I would like to know how this could happen and why someone else has the ability to use my e-mail on Skype.
using the email address in question, send an email to [email protected] to request to unlink your email address from that unauthorized account.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com | -
My new 3G is great. However...
My previous phone had a feature that the iPhone lacks. I used that feature to provide an alert that I wanted, and I'm wondering how to use features, app's, etc of the iPhone to recreate that alerting service.
1. *My own Alert*
2. *How I did it on my previous phone*
3. *How to do it on the iPhone??*
1. My own Alert
I want to have an immediate telephone alert (of some kind) when an email arrives into my gmail account that is from a specific list of senders (like FROM: <SomeoneSpecial>@<MyGmailAcount>.com) or any e-mail to my business account ( <anyone>@<MyBusiness>.com ).
2. How I did it on the previous phone
I set up <MyBusiness>.com to forward any emails, and gmail to forward emails from my that someone special, to another e-mail address. That forwarding e-mail address was the e-mail address of the phone: <phone-number>@phone-provider.com (or something like that). Yes, those phones had an e-mail address and could directly receive e-mail. (I know that this is not the case for the iPhone.) The other phone would receive this e-mail as a "data" message, not an IM, so I didn't need or have text messaging on that phone. When it received such an e-mail, it would sound an alert, and I could see the e-mail on the phone.
In this way, I was able to know immediately when I received a high-value e-mail at my other e-mail addresses. Note: I did not give out or use the phone's e-mail addr for anything else, so anything coming in would only be these high-value messages.
3. *How to do it on the iPhone??*
<here's where you give me your ideas!> Please note: I use the iPhone's gmail app, and don't want to lose that (in case you come up with a solution that somehow conflicts with that). Also note that I don't want to receive an alert whenever I receive any e-mail, just those high-value ones.
All suggestions are welcome. Thanks for reading this long (and, I hope, clear) post.Assuming you're in the United States (you didn't specify in your profile), your phone's e-mail address is your 10 digit phone number @txt.att.net. For example, [email protected]
E-mails to your phone's address are delivered as an SMS message, and therefore count against your monthly allotment of SMS messages. -
Good Afternoon,
My Customer is running Exchange 2013 CU5 that has a transport rule that is supposed to reject any email from a particular user as that user is no longer with the company. The transport rule rejects the message, BUT, it does
not show the Custom DSN. It shows the default message:
Delivery has failed to these recipients or groups:
[email protected] Your message wasn't delivered because the recipient's email provider rejected it.
Diagnostic information for administrators:
Generating server: EXMBX01.DOMAIN.LOCAL
[email protected] Remote Server returned '< #5.7.169 smtp;550 5.7.169 TRANSPORT.RULES.RejectMessage; the message was rejected by organization policy>'
I have looked up the transport rule in Exchange:
Get-TransportRule "User Reject" | fl *Reject*,Description
RejectMessageEnhancedStatusCode : 5.7.169
RejectMessageReasonText : This E-MAIL Address is no longer in service. Please Contact
[email protected] for assistance
SmtpRejectMessageRejectText :
SmtpRejectMessageRejectStatusCode :
Description : If the message:
Is sent to '[email protected]'
and Is received from 'Outside the organization'
Take the following actions:
Set audit severity level to 'High'
and reject the message and include the explanation 'This E-MAIL
Address is no longer in service. Please Contact
[email protected] for assistance' with the status code: '5.7.169'
I tried setting up to separate external DSN messages and tried both with the same results:
Get-SystemMessage | ft -a -wr
Identity Text
en\External\5.7.69 This E-MAIL Address is no longer in service. Please Contact [email protected] for assistance.
en\External\5.7.169 This E-MAIL Address is no longer in service. Please Contact [email protected] for assistance.
I tried to change the SmtpRejectMessageRejectText on both Exchange servers and got the following error:
Set-TransportRule -Identity "User Reject" -SMTPRejectMessageRejectText "This E-MAIL Addre
ss is no longer in service. Please Contact [email protected] for assistance"
A specified parameter isn't valid on a server with the Hub Transport role installed.
+ CategoryInfo : InvalidArgument: (SmtpRejectMessageRejectText:String) [Set-TransportRule], ArgumentExcep
tion
+ FullyQualifiedErrorId : [Server=EXMBX01,RequestId=b2a61aba-179b-4867-85b8-cc47eba62701,TimeStamp=6/27/2014
7:19:32 PM] [FailureCategory=Cmdlet-ArgumentException] 8BBE1900,Microsoft.Exchange.MessagingPolicies.Rules.Tasks.
SetTransportRule
+ PSComputerName : exmbx01.domain.local
I really am having issues finding and answer. Any assistance would be greatful!
Thanks,
Lance LingerfeltHi Lance,
Thanks for your update.
According to the error that you pasted, "A specified parameter isn't valid on a server with the Hub Transport role installed.", it seems you have no proper permission to use some specific parameters.
Even if there are many parameters in the Technet article
http://technet.microsoft.com/en-us/library/bb125138(v=exchg.150).aspx , you may not have access to some parameters if they're not included in the permissions assigned to you. You need Organization Management and Records Management permissions, see
the following links:
http://technet.microsoft.com/en-us/library/dd633492(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/dd335087(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/dd638205(v=exchg.150).aspx
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Using Desktop Manager for managing Evolution Mail-Accounts
hi there,
where can i find a documentation that describes how i can manage
evolution acocunts within Desktop Manager. I just can add an account name
but i can not define the account specific configuration data such as the
type of email server (in our case: M$ Exchange and SUN JES Server)
and based on the type of email server i must add some more or less configuration
information.
second question : can i use some variables for those configuration data such as
$USERNAME to configure the evolution email account using the correct username ?
the password has to be entered by the user if he/she runs evolution for the first time.
thanks in advance
cheers
joergHi Joerg,
The documentation for the Desktop Manager focuses on the common parts of the operation of the product, the details of the meaning of each setting are more related to the application to which they belong, which is why they don't feature in the general administration manual. You can, however, find more contextual information about the various pages of the Desktop Manager by clicking on the "More" button present on each of these pages, for instance in the case of the Evolution accounts, this would have told you about the fact that the Accounts field is a list of strings containing the XML account description (though I'll grant you that in this particular case, it's a bit on the terse side).
As for the placeholders, you need to update your Sun Ray server with patch 120454 (120455 depending on your platform) revision 02, so that the GConf adapter which integrates Desktop Manager data into the Gnome configuration handles the placeholder properly. Then you have the possibility of using the special strings "[apoc.<attribute>]" in the configuration settings, which will be replaced when evaluated with the value of <attribute> in the LDAP user entry.
As an example (which you should adapt to the contents of your LDAP server and the actual definition you want to use for your Evolution accounts), you could for instance use the following XML blob for an Evolution account (I've formated it nicely for display purposes, you will want to paste as a single line into that Accounts list):
<?xml version="1.0"?>
<account name="[apoc.mail]" uid="[apoc.uid]" enabled="true">
<identity>
<name>[apoc.cn]</name>
<addr-spec>[apoc.mail]</addr-spec>
<reply-to></reply-to>
<organization></organization>
<signature auto="false" default="-1"/>
</identity>
<source save-passwd="false" keep-on-server="false" auto-check="true" auto-check-timeout="10"/>
<transport save-passwd="false">
<url>smtp://[apoc.givenname].[apoc.sn]@[apoc.mailhost]</url>
</transport>
<drafts-folder>file:///home/[apoc.uid]/evolution/local/Drafts</drafts-folder>
<sent-folder>file:///home/[apoc.uid]/evolution/local/Sent</sent-folder>
<auto-cc always="false">
<recipients></recipients>
</auto-cc>
<auto-bcc always="false">
<recipients></recipients>
</auto-bcc>
<pgp encrypt-to-self="false" always-trust="false" always-sign="false" no-imip-sign="false">
<key-id></key-id>
</pgp>
<smime encrypt-to-self="false" always-sign="false"/>
</account>Now to go back to your problem with getting the profiles you've assigned with the Desktop Manager visible on the user's desktop, I can first offer a few remarks on your configuration:
- you've specified a DN and password for authentication to your LDAP server, I would like to point out that the agent (as opposed to the Desktop Manager itself) will only ever perform read accesses to your LDAP server (to find the user entry, figure out its position in the hierarchy and retrieve the applicable profiles), so you don't need to provide a user with write access, let alone administrative priviledges, as you seem to have done. If your LDAP server setup supports anonymous read access, I would advise you to leave these fields blank in the agent configuration;
- you've set the ChangeDetectInterval, DaemonChangeDetectInterval, TimeToLive and GarbageCollectionInterval to 1 (minute), which is unnecessary and for some of them probably detrimental to the performance of the agent operation. I can expand if you wish on the meaning of each of these (though I think that's described in the manuals), but I would advise you put back the default values for all of these settings, except maybe the ChangeDetectInterval while you're testing the product (this is the setting used to determine how often the user data is refreshed, i.e how often the changes from the Desktop Manager are propagated to the desktop applications, one minute is fine for testing purposes but you should put it back to its sixty minutes default once the profiles are fairly stable in order to minimise the activity of the agent).
Please first try and make the above changes to the agent configuration, and check whether the problem you're having is still present. If so, we can look into other potential causes for the problem.
Regards,
Cyrille -
Smartforms: How to CC email & Include a few lines of Text in Body of email?
I have created a smartform and have it outputting PDf documents and sending then via e-mail and it all works great. Except u2026 now I would like to CC someone and also have a few lines of text in the e-mail. Does anyone have any ideas?
Here is my code:
IF p_mail = 'X'.
wa_ctrlop-device = 'MAIL'.
PERFORM mail_recipient_object.
PERFORM mail_sender_object.
PERFORM mail_appl_object CHANGING g_mail_app_obj.
ENDIF.
LOOP AT my_table.
CONCATENATE 'ECS' comp_year izhr_emp_comp_summary-emp_lname INTO wa_outopt-tdtitle separated by space.
CALL FUNCTION func_mod_name
EXPORTING
CONTROL_PARAMETERS = wa_ctrlop
MAIL_APPL_OBJ = g_mail_app_obj
MAIL_RECIPIENT = email_recipient
MAIL_SENDER = email_sender
OUTPUT_OPTIONS = wa_outopt
USER_SETTINGS = u2018Xu2019
IMPORTING
DOCUMENT_OUTPUT_INFO = document_output_info
JOB_OUTPUT_INFO = t_otfdata
TABLES
I_MYTABLE = imy_table
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
ENDLOOP.
Determines the Recipent of the E-Mail
FORM mail_recipient_object.
CALL FUNCTION 'CREATE_RECIPIENT_OBJ_PPF'
EXPORTING
ip_mailaddr = email_address "E-mail Addr:Input Screen
ip_type_id = 'U' "Internet Address
IMPORTING
ep_recipient_id = email_recipient "Recipient Obj Key
EXCEPTIONS
invalid_recipient = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e531(0u) WITH text-003. "Error E-Mailing
ENDIF.
ENDFORM. "mail_recipient_object.
*Sender of E-mail
FORM mail_sender_object.
CALL FUNCTION 'CREATE_SENDER_OBJECT_PPF'
EXPORTING
ip_sender = sy-uname "User Logged in
IMPORTING
ep_sender_id = email_sender
EXCEPTIONS
invalid_sender = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e531(0u) WITH text-e15. "Error E-Mailing
ENDIF.
ENDFORM. "mail_sender_object.
*Creates Mail Application Object to E-Mail Smartform
FORM mail_appl_object CHANGING g_mail_app_obj.
SELECT SINGLE * FROM soud WHERE sapnam LIKE sy-uname AND deleted = ' '.
IF sy-subrc NE 0.
CALL FUNCTION 'SO_USER_AUTOMATIC_INSERT'
EXPORTING
sapname = sy-uname
EXCEPTIONS
no_insert = 1
sap_name_exist = 2
x_error = 3
sap_name_not_exist = 4
OTHERS = 5.
ENDIF.
CLEAR sofmfol_key.
sofmfol_key-type = 'FOL'.
sofmfol_key-year = soud-inbyr.
sofmfol_key-number = soud-inbno.
bor_key = sofmfol_key.
IF NOT bor_key IS INITIAL.
swc_create_object folder 'SOFMFOL' bor_key.
IF sy-subrc = 0.
swc_object_to_persistent folder g_mail_app_obj.
IF sy-subrc NE 0.
CLEAR g_mail_app_obj.
ENDIF.
ENDIF.
ELSE.
CLEAR g_mail_app_obj.
ENDIF.
ENDFORM. "mail_appl_object.Get rid of the smartform-based mail sending code if you can. That interface is quite old, simplistic, and inflexible (i.e., you can't do what you're asking). I would use class CL_BCS. It's especially much easier once you have developed a (custom) standard email wrapper class for sending various types of emails, including smartform-based PDF-attached emails. You can even go with HTML and dress-up your emails a bit.
-
How to include one view into another view
Hi SDN's,
Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
LIKP-KUNNR -> KNA1-ADRNR
KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
LIKP-ERNAM -> USR21-BNAME.
USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
USR21-PERSNUMBER -> ADR6-PERSNUMBER.
In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim -
Cannot join Server 2012 machine to domain
I am trying to join a clean Server 2012 machine configured with Active Directory Domain Services and DNS features enabled to a domain (alekatest.com) which I have purchased. The Active Directory Domain Services option in Server Manager advises me that
the server requires promotion to a Domain Controller, but if I select "Add a domain controller to an existing domain" and enter "alekatest.com", and supply Domain Admin credentials I get a message "Encountered an error contacting
domain alekatest.com. The server is not operational". The DNS server has address 10.0.0.2.
When I try and change from workgroup to new domain alekatest.com, it fails with the message "No records found for given DNS query. The query was for the SRV record for _ldap._tcp.dc._msdcs.alekatest.com". The server is connected by Ethernet to
a wireless router in a home network.
The ipconfig/all data from the server is:
Windows IP Configuration
Host Name . . . . . . . . . . . . : SERVER2012
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82567LM-3 Gigabit Network Connecti
Physical Address. . . . . . . . . : 00-26-B9-82-D5-76
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.0.0.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.138
DNS Servers . . . . . . . . . . . : 10.0.0.2
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6ab8:386b:2023:f5ff:fffd(Prefer
Link-local IPv6 Address . . . . . : fe80::386b:2023:f5ff:fffd%14(Preferred)
Default Gateway . . . . . . . . . : ::
DHCPv6 IAID . . . . . . . . . . . : 335544320
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-FC-79-E8-00-26-B9-82-D5-76
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{6945E26E-B530-4271-8CF1-AD4BC13AF147}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Reusable ISATAP Interface {74B5ED96-D12C-413B-9ED4-5B6270328AE0}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Reusable ISATAP Interface {A9E91CEE-5350-4ACA-934D-D2AA5188B694}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
I can ping alekatest.com from the server:
Pinging alekatest.com [203.170.87.12] with 32 bytes of data:
Reply from 203.170.87.12: bytes=32 time=86ms TTL=50
Reply from 203.170.87.12: bytes=32 time=109ms TTL=50
Reply from 203.170.87.12: bytes=32 time=106ms TTL=50
Reply from 203.170.87.12: bytes=32 time=81ms TTL=50
and nslookup alekatest.com returns
Server: UnKnown
Address: 10.0.0.2
Non-authoritative answer:
Name: alekatest.com
Address: 203.170.87.12
if I try to return srv records from alekatest.com as follows, no records are returned
PS C:\Users\Administrator> nslookup
Default Server: UnKnown
Address: 10.0.0.2
> set q=srv
> _ldap._tcp.dc._msdcs.alekatest.com
Server: UnKnown
Address: 10.0.0.2
_ldap._tcp.dc._msdcs.alekatest.com
primary name server = ns1.crazydomains.com
responsible mail addr = dns.crazydomains.com
serial = 2010010101
refresh = 7200 (2 hours)
retry = 120 (2 mins)
expire = 1209600 (14 days)
default TTL = 3600 (1 hour)
In order to add an srv record I would appear to need to access the server ns1.crazydomains.com, which I doubt is possible.
Any help would be much appreciatedYou're confusing DNS Domains and Active Directory Domains. While there are similarities the two are and do completely different things.
A DNS domain, in your case alekatest.com hosted by crazydomains.com is used to direct people to resources, for instance on the internet, to get to things like your website, email etc. It's not specific to Windows, and generally speaking after purchasing
it from a 3rd party you control what the DNS records are through that 3rd party.
An Active Directory domain is what you're referring to when you talk about joining a machine to a domain, setting up users on a domain, controlling access to resources on your network etc. This doesn't require you to purchase a domain from a 3rd party, and
could potentially be called anything you like.
So, in terms of your AD server, assuming you don't already have an AD domain configured on another AD controller on the network, when you do the setup you'll need to select the option to create a new domain. You could then set it to use alekatest.com, but
that isn't recommended as you can get into all kinds of issues with your local and public DNS records conflicting, so unless you know what you're doing and why you're doing it I'd suggest avoiding that. A better idea would be to set the AD domain to something
like alekatest.local. That would then become the local domain, so for instance your users would login as akekatest\<username> on the domain, and your local machines can then be joined to that domain.
Once all that is done, if you did need to have local records for alekatest.com pointing to local resources, there's nothing stopping you from adding that zone into DNS Manager on the AD server and configuring the records accordingly, however be aware that
once you did that your server would assume that it has all the records for the domain. So if you had a website configured on
www.alekatest.com and had the DNS records for that pointing to your website hosted somewhere else via your domain provider, if you didn't re-create that same record on your local copy of the domain then you'll be unable
to reach that website from your local network (since your users will be trying to find it locally rather than on the internet).
Hope that makes sense. -
Can not receive emails from any accounts rather than Rogers(my ISP)
Hi all,
I have OCS10g installed on RHEL_AS4. Currently I got problem to receive and send emails both inbound and outbound.
When I send e-mail by either Oracle Web Access Client or Oracle Mail. It went smooth through the sending page. Unfortunately I can not get the e-mails neither from inbound or outbound domains, except [email protected]. Rogers is my current ISP and I am using the TZO dynamicIP service for the OCS server.
The configuration for smtp_inbound_server are as following. Has anyone known the solution of my problem?
Thanks,
smtp_in:115202828832018325
Mail Collaboration Suite Database:
Message Intertion Mode: RoundRobin
Selected Collaboration Suite Database: orcl.myocsdomain.com
Delivery Collaboration Suite Database:
Selected Collaboration Suite Database: orcl.myocsdomain.com
LDAP Connection Pool Parameters:
Increment:1
Minimum: 2
Maximum: 20
LDAP Time Lag: 500
LDAP Connection Retry Parameters
Max Con. Retry Int.: 100000
Recon. Timeout: 1
Max. Retry Count: 100
Threas Parameters
Timeout: 1860
Increment: 1
Min.: 1
Max.: 500
DSN Parameters
Postmaster DSNs: all
Temp. DSN Int.: 24
Include Complete Error Message in DSN: True
Rules and Routing Control Parameters
Routing Control: Enabled
Spam Flood Int.: 10
Spam Max. Flood Count: 10000
Max # of Receipients Allowed in an Envelop: 100
Env. and Mess Header Checking: Disable Checks
Reject Mess. with Diff Auth ID and sender: Do not check
Enforce Reverse DNS lookup on Client IP: False
DNS check on Helo/Ehlo domain: False
DNS Check on Sender Domain: False
Relay Allowed: False
Trusted Relay Domain: mail.myocsdomain.com
External Filter: False
Trusted Domains:
mail.myocsdomain.com
Trusted Sender Domains:
hotmail.com
gmail.com
Trusted Senders:
*mail.myocsdomain.com
General Parameters
Local Domains: mail.myocsdomain.com
Archive Processing: Disabled
Presentation Name : ESSMI
Max. Size of Shell: 1000000
Max. # of Headers Allowed in a message: 1000
Max. # of Clients: 1000
Port: 25
Checkpoint Int.: 20
Max. Hop Count: 25
Max. Message Size: 0
Message Timeout: 30
SMTP Queue Timeout: 5 days
Use Error-To Header to specify the mail addr. for DSN's: true
Authentication: None
Submit Only: False
Process IMIP Messages: False
SASL Protection: Confidentially
SASL Authentication Disabled
Support STARTTLS Command: False
Allow Clear Tect Logn: True
Default Domain: mail.myocsdomain.com
Add Domain to email addr. wit missing domain in envelop: False
Protocol Banner: server ready. Unauthorized Access...
Process Log Level: Warning
Max. Log Size: 5M
Max. # of Log Files: 10
.......When I check the logfile, I found the error messages like this :
mtext Delivery to ******@gmail.com failed rcode=1 smtp_err=421
There is no error message about sending to [email protected], however I couldn't receive any emails I send to myself.
Thanks for your time in advance. -
We recently switched hardware and server software Win SBS 2008 to 2012R2 for a small network roughly 40 clients (Win7 Pro / Win 8.1 Pro) about 16 running concurrently at a given time and one network printer with the printer queue residing on the DC as well.
I read that a single server environment might not be ideal in particular no fail-over but that is an accepted risk in this particular network here.
Errors:
Error 1043: Timeout during name resolution request
Error 1129: Group policy updates could not be processed due to DC not available
Error 5719: Could not establish secure connection to DC, DC not available
Occasionally but disappears after a while
Error 134: As a result of a DNS resolution timeout could not reach time server
Symptoms
On Win 7 Clients
Network shares added through Group Policy will not show sometimes
Network shares disconnect (red X) and when accessed return access authorization error after one or two clicks on the share finally grant access again
When the issue with accessing network shares occurs, it usually also affects Internet access meaning a 'server not responding' error appears in the browser windows when trying to open just any web page
nslookup during the incident returns cannot resolve error
ipconfig on client shows correct default router (VDSL Router) and DHCP / DNS Domain Controller
Also, the Win system log shows the above errors during these incidents, however, the nuimber of incidents vary from 20-30
On Win 8.1 Clients
Same as above with the slight variation for network shares apparently due to Server 2012 and Win 8.1 clients managing drive shares differently. However, network share refresh does not work with this clients. In most cases only a gpupdate /force returns
drive shares but usually only for the active session. After logoff / logon the shares are gone again.
The issue does appear to be load related since it occurs even if there are only one or two workstations active.
Server Configuration
Dell R320 PowerEdge 16GB / 4TB 7200RPM RAID10 / GBitEthernet
Zyxel 1910-48 Port Switch
VDSL 50Mbps Down / 20Mbps Up
Since the DC is the only local DNS and there are no plans to add another one or move DNS to another server, the DNS server is configured with this own address as preferred DNS with three DNS forwarders 1) VDSL Router 2) ISP DNS1 3) ISP DNS2
Currently only one Network card is active for problem determination reasons.
There appears to be no consensus concerning IPV6 enabled or disabled, I tried both with no apparent effect
I have set all network cards server and client to Full Duplex and the same speed, also disabled Offload functions within the adapter settings. Some but no consistent improvements.
Best Practice Analyzer Results
DNS server scavening not enabled
Root hint server XYZ must respond to NS queries for the root zone
More than one forwarding server should be configured (although 3 are configured)
NIC1 should be configured to use both a preferred and alternate DNS (there is only one DNS in this network)
I have found some instructions to apply changes to the clients through a host file but I would rather like to understand whether this DNS response time issue can be resolved on the server for example timing setting perhaps. Currently the DNS forwarders are
set to 3 second.
Since a few people have reported issues with DNS but most are working with multi DNS, DC environment I could not really apply any suggestions made there. perhaps there is anyone like me who is running a single server who has overcome or experience the same
issues. Any help would be appreciatedHello Milos thx for your reply.. my comments below
1. What does it "switched"? You may mean migration or new installation. We do not know...
>> Switched is probably the incorrect term, replaced would be the appropriate wording. Before, there was a HP Proliant Server with SBS 2008 with distinct domain and now there is a Dell Server with MS 2012 R2 with a distinct domain. Client were
removed from one (SBS) domain and added to the new Server 2012 domain. Other components did not change for example same Network Switch or VDSL Router, Workstations and Printer
2. Two DCs are better alternative. Or backup very frequently. There are two groups of administrators. Those who have lost DC and those who will experience this disaster in near future.
>> Correct, and I am aware of that
3. NIC settings in W 7 and W 8.1, namely DNS points to DC (...and NOTHING else. No public IP or that of router DNS.))
>> Correct, this is how it's currently implemented. Clients point to DC for DHCP and DNS and Default Router, no public IP or DNS. The only references to ISP DNS exist on the VDSL Router itself as provided through ISP when establishing VDSL
Link and the list of Forwarders in the DNS Server configuration. However, I have just recently added the ISPs DNS as forwarders for test purposes and will probably learn tomorrow morning whether this had any effect for better or worse.
4. Do nslookup to RR on clients. RR branch is saying client basic info on LDAP parameters of AD.
>> Will post as soon as available
5. I do not use forwarders and the system works
>> Ok, does this mean it works for you in a similar or the same infrastructure setup or are you saying it is not required at all and I can remove any forwarder in a scenario like mine? If not required can you explain a bit more why it is not
required apart from that it does work for you that way?
6. DHCP should sit on DC (DHCP on router is disabled)
>> Correct, no other device is configured to provide DHCP service other than DC and DHCP is currently running on DC
7. NIC settings in DC points to itself (loopback address 127.0.0.1)
>> Are you sure this is still correct and does apply to Server 2012? I am reading articles stating that it should be the servers own IP but local loop or should this be added as alternate DNS in addition to the servers own IP?
8. Use IPCONFIG /FLUSHDNS whenever you change DNS settings.
>> OK, that was not done every time I changed some settings but I can do that next week. Reboot alone would not suffice, correct?
9. Test your system with dcdiag.
>> See result below
10. Share your findings.
Regards
Milos
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = GSERVER2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\GSERVER2
Starting test: Connectivity
......................... GSERVER2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\GSERVER2
Starting test: Advertising
......................... GSERVER2 passed test Advertising
Starting test: FrsEvent
......................... GSERVER2 passed test FrsEvent
Starting test: DFSREvent
......................... GSERVER2 passed test DFSREvent
Starting test: SysVolCheck
......................... GSERVER2 passed test SysVolCheck
Starting test: KccEvent
......................... GSERVER2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... GSERVER2 passed test
KnowsOfRoleHolders
Starting test: MachineAccount
......................... GSERVER2 passed test MachineAccount
Starting test: NCSecDesc
......................... GSERVER2 passed test NCSecDesc
Starting test: NetLogons
......................... GSERVER2 passed test NetLogons
Starting test: ObjectsReplicated
......................... GSERVER2 passed test
ObjectsReplicated
Starting test: Replications
......................... GSERVER2 passed test Replications
Starting test: RidManager
......................... GSERVER2 passed test RidManager
Starting test: Services
......................... GSERVER2 passed test Services
Starting test: SystemLog
......................... GSERVER2 passed test SystemLog
Starting test: VerifyReferences
......................... GSERVER2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : GS2
Starting test: CheckSDRefDom
......................... GS2 passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... GS2 passed test CrossRefValidation
Running enterprise tests on : GS2.intra
Starting test: LocatorCheck
......................... GS2.intra passed test LocatorCheck
Starting test: Intersite
......................... GS2.intra passed test Intersite
Server: gserver2.g2.intra
Address: 192.168.240.6
*** gserver2.g2.intra can't find g2: Non-existent domain
> gserver2
Server: gserver2.g2.intra
Address: 192.168.240.6
g2.intra
primary name server = gserver2.g2.intra
responsible mail addr = hostmaster.g2.intra
serial = 443
refresh = 900 (15 mins)
retry = 600 (10 mins)
expire = 86400 (1 day)
default TTL = 3600 (1 hour)
> wikipedia.org
Server: gserver2.g2.intra
Address: 192.168.240.6
Non-authoritative answer:
wikipedia.org MX preference = 10, mail exchanger = polonium.wikimedia.org
wikipedia.org MX preference = 50, mail exchanger = lead.wikimedia.org
polonium.wikimedia.org internet address = 208.80.154.90
polonium.wikimedia.org AAAA IPv6 address = 2620:0:861:3:208:80:154:90
lead.wikimedia.org internet address = 208.80.154.89
lead.wikimedia.org AAAA IPv6 address = 2620:0:861:3:208:80:154:89
Final benchmark results, sorted by nameserver performance:
(average cached name retrieval speed, fastest to slowest)
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name | 0,001 | 0,002 | 0,003 | 0,001 | 100,0 |
+ Uncached Name | 0,027 | 0,076 | 0,298 | 0,069 | 100,0 |
+ DotCom Lookup | 0,041 | 0,048 | 0,079 | 0,009 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
gserver2.g2.intra
Local Network Nameserver
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,023 | 0,025 | 0,000 | 100,0 |
- Uncached Name | 0,025 | 0,071 | 0,274 | 0,065 | 100,0 |
- DotCom Lookup | 0,039 | 0,040 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns8.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,023 | 0,026 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,072 | 0,299 | 0,066 | 100,0 |
- DotCom Lookup | 0,039 | 0,042 | 0,049 | 0,003 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns7.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,033 | 0,040 | 0,079 | 0,011 | 100,0 |
- Uncached Name | 0,042 | 0,113 | 0,482 | 0,097 | 100,0 |
- DotCom Lookup | 0,049 | 0,079 | 0,192 | 0,039 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
google-public-dns-a.google.com
GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:33:12 to 14:33:29, for 00:17,648
15: 40
192.168.240. 6 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
+ Cached Name | 0,001 | 0,002 | 0,004 | 0,000 | 100,0 |
+ Uncached Name | 0,025 | 0,074 | 0,266 | 0,063 | 100,0 |
+ DotCom Lookup | 0,042 | 0,048 | 0,075 | 0,007 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
gserver2.g2.intra
Local Network Nameserver
195.186. 1.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,024 | 0,073 | 0,289 | 0,067 | 100,0 |
- DotCom Lookup | 0,039 | 0,041 | 0,043 | 0,001 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns7.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
195.186. 4.162 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,022 | 0,024 | 0,029 | 0,001 | 100,0 |
- Uncached Name | 0,025 | 0,073 | 0,286 | 0,065 | 100,0 |
- DotCom Lookup | 0,041 | 0,066 | 0,180 | 0,037 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
cns8.bluewin.ch
BLUEWIN-AS Swisscom (Schweiz) AG,CH
8. 8. 8. 8 | Min | Avg | Max |Std.Dev|Reliab%|
----------------+-------+-------+-------+-------+-------+
- Cached Name | 0,033 | 0,038 | 0,077 | 0,009 | 100,0 |
- Uncached Name | 0,042 | 0,105 | 0,398 | 0,091 | 100,0 |
- DotCom Lookup | 0,049 | 0,066 | 0,141 | 0,025 | 100,0 |
---<-------->---+-------+-------+-------+-------+-------+
google-public-dns-a.google.com
GOOGLE - Google Inc.,US
UTC: 2014-11-03, from 14:39:59 to 14:40:12, for 00:13,363 -
Oracle 8.1.7 on Redhat Advanced Server 2.1
According to this link http://www.redhat.com/oracle_cert/ RH AS 2.1 is certified for Oracle 8.1.7.
But I couldn't find any information about installing oracle 8.1.7 on RH AS 2.1 on the internet.
Could some one help me?
I need step by step installation procedure, because I want to use this configuration in my production environment.Agi,
I need to do the same thing as you, and have the same question as you. What is your current situation? What you got from Oracle support?
I have experienced installing Oracle 8.1.7 on SuSE 7.3 and 8.0 with quite a few patches. Among others, one ought to install orarun.rpm by SuSE and Oracle patch for glibc as seen elsewhere on Web. I wonder if I have to do the same for RH AS 2.1, because it's released after 8.1.7.
Here is my e-mail addr.
[email protected]
let me know your luck.
thanks
Johnny -
NumberFormatException in dbassis Oracle 8.1.7 on RedHat 8.0
I have installed Oracle 8.1.7 and patched glibc library successfully.
When i run dbassist to create a db i get always a NumberFormatException. I have tryed with a symbolic link to free but doesn't work. Anyone can help me? (i have installed j2se 1.4.1)
thanks
MarcoAgi,
I need to do the same thing as you, and have the same question as you. What is your current situation? What you got from Oracle support?
I have experienced installing Oracle 8.1.7 on SuSE 7.3 and 8.0 with quite a few patches. Among others, one ought to install orarun.rpm by SuSE and Oracle patch for glibc as seen elsewhere on Web. I wonder if I have to do the same for RH AS 2.1, because it's released after 8.1.7.
Here is my e-mail addr.
[email protected]
let me know your luck.
thanks
Johnny -
Error on installing intel p4 ver 8
tried to Install the ORACLE Client 8.1.7/8.1.6 on Pentium4 with win98se platform. On inserting the CD it gave the first prompt and after Clicking the "INSTALL/DE-INSTALL PRODUCTS", system stops. Checking in the TaskManager helps us to know that 'setup.exe' and 'java.exe' were started for a fraction of the second and then stopped.
Tried to explore the issue and it seems that the JAVA version which ORACLE is using for the INSTALLATION of 8.1.7 is NonCompatible with the P4[NT Platform].
However, 8.0.5/8.0.6 Client version were successfully Installed on the same configuration.
Can Anyone help me out in Installing 8.1.6 on P4[win98se].
Thanks in advance
pls mail me urgently
e-mail addr. [email protected]The issue is with with pentium 4 chip does not somehow recognise the file "symcjit.dll". You will find more info in the website "http://developer.intel.com/design/processor/future/manuals/knownissue.htm" and "http://www.indiana.edu/~dms/databases/oracle/pentium_iv_bug_fix.htm".
A workaround this problem is to copy the whole CD in your hard disk and then rename the "symcjit.dll" to "symcjit.old" and continue with installation. This helps. I have done this.
regards
Partha
[email protected]
Maybe you are looking for
-
Multiple APP run's for same vendor
Dear Friends, I would like to know whether it is possible to do multiple payment proposals for a vendor on same dates. here is the scenario: Each business area would like to creat and edit payment proposals for the same dates, for ex: Run date is 1.1
-
Repair install... wait... what if I can't boot?
Ok, so here's a two part question: 1. Just say something has gone terribly wrong and I cannot boot into Windows. Some corrupt Windows file - I'm thinking important things like winload.exe and some vital dll's - or maybe something has gone wrong in th
-
Flexible graphs from java script
Hi, Can anybody help me to find flexible graphs with java script?. I am using Oracle 9i as my database, jsp and ejbs... Thank you.
-
Logic for materia Vs workcenter
Can some body help to fetch the best table to get the below report with given selection fields. Create a report to Display material, material description, work center and plant. The selection should have the material type(mtart) the material pricingg
-
OK, so here's my NEW question!
Can the old Mac Mini get online seeing as it does not have an airport card?? My husband would like to continue to use it, but of course he wants to use it wirelessly. Right now it's hard wired by an ethernet cable. Thoughts??