Webmin: Unable to access - Certificate error

For a long time, whenever i attempted to access webmin, which forces you to use https, i got a warning message that could be bypassed..... but since a couple of days ago, i get a message which only option is to go to the previous page because the certificate is invalid....
I actually did not install any certificate so i need to either disable https, or install a certificate (can this be done for free?) or fix something on every browser that i want to use to connect to webmin......
Any ideas?

Hi, ok now I see, no you don't if you use bpel, but anyway the ?wsdl url is not reachable in on demand. Url https://secure-ausomxdsa.crmondemand.com/Services/Integration is right if you are on pod "dsa". I'm not that familiar with bpel but as far as I know it's simply loading the wsdl into your bpel process and use WS-Security for server side session handling. If you don't send security headers you have to define a login step first but normally this is not necessarry if you add ws security header in your requests.
Best Regards
SL

Similar Messages

'Unable to access application'-Error in ACC-installation

Dear Gurus,
I started an adaptive computing controller 1.0 SP8 installation. In phase 5 - Start J2EE Engine for Online deployment- it ran into an error:
Unable to access application $(DIR_EXE_ROOT)/run/startsap. No such file or directory.
I used the AL11- transaction to check the variable, but it seemed to be alright. (I also suppose it was used properly before during the installation). The run- directory with the startsap in it is also at the right place, so I cannot realize the problem.
Any ideas or possible solutions are heartly welcome!
Greets,
Maike

Hi Maike,
what OS are you installing on? This looks like the environment variable is not correctly set ...
Just for your information. The Adaptive Computing Controller 7.1 is planned to go into GA end of July.
Kind regards
Gunther

Unable to access endpoints error. What might cause it?

I got the below error
“Unable to access the following endpoint(s): https://secure-ausomxdsa.crmondemand.com/Services/Integration”
I copied and pasted the below url into a browser and I got the “Page Not Found” error
https://secure-ausomxdsa.crmondemand.com/Services/Integration?wsdl
Do you know what might cause this error?
Thanks

Hi, ok now I see, no you don't if you use bpel, but anyway the ?wsdl url is not reachable in on demand. Url https://secure-ausomxdsa.crmondemand.com/Services/Integration is right if you are on pod "dsa". I'm not that familiar with bpel but as far as I know it's simply loading the wsdl into your bpel process and use WS-Security for server side session handling. If you don't send security headers you have to define a login step first but normally this is not necessarry if you add ws security header in your requests.
Best Regards
SL

Unable to Access Resource Error in AE CS6

Hello,
I'm running After Effects CS6 11.0 on MAC OSX and everytime I attempt to apply text, either by creating a new text layer from the drop down menu or dragging open a text box I get
"Unable to Access Resource P_TextSmallCaps_Sm_N_D (type png)"
Is this a png file missing from the program, a fixable bug or what?
Any help at all would be greatly appreciated. Thank you.

Run the Creative Cloud Cleaner Tool, reinstall the program. Something is damaged.
Mylenium

Safari unable to access server error message on ipad

wireless network connected to Ipad but Safari "unable to connect to server" at any web address entered

Hello Glen,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot your iPads Wi-Fi connection:
iOS: Troubleshooting Wi-Fi networks and connections
Regards,
Jeff D.

Unable to access jar file error !

hello,
i have built my netbeans project and obtained the hequalifies.jar file . unfortunately when i'm trying to run this jar file from the prompt command I'mgetting the error: unable to access jar file
here is the command i'm typing:
C:\Users\User\Documents\NetBeansProjects\hEqUALIFIES\dist>java -jar " C:\Users\U
ser\Documents\NetBeansProjects\hEqUALIFIES\dist hequalifies.jar "
anyone has any clue?
10x!

ok i'm gonna make it easier on you.
i gess i found what is the problem but have no idea how to solve it.
when i obtained the .jar file i also obtained a README.txt file in which it is written the following phrase:
** If a library on the projects classpath also has a Class-Path element*
specified in the manifest,the content of the Class-Path element has to be on the projects runtime path.
I'M SORRY BUT I DID NOT UNDERSTAND WHAT IS MEANT BY: what is "the projects runtime path"?
the content of my manifest is:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
Created-By: 10.0-b23 (Sun Microsystems Inc.)
Main-Class: hequalifies.ui.HeQualifies
Class-Path: lib/PlugIn
X-COMMENT: Main-Class will be added automatically by build
I'm having problem with lib/plugin.

How do I remove the certificat error everytime I try to access the Cisco Unified CM Administration web-page?

Hi,
Every time I want to have access to the Cisco Unified CM Console (System version: 7.0.1.11000-2), I use the https://10.10.x.x/ccmadmin/showHome.do homepage on my client computer, but when I open the page, I get a SSL certificate error, stating no trust to this webpage security certificate and if I those "continue to this page (not recommended)", I get access to the Cisco Unified CM Console web page.
I have tried to add the https://IP-adress to secure web pages in Internet Explorer 7, but this to no avail, it does not help.
How do I add this certificate to a trusted something, so I do not get this warning every time I open the page?
Kind regards,
Carl-Marius

Hi Michael,
It worked when I change the IP-address to the name that was written in the certificate, and imported the certificate to Internet Explorer.
Thank you for your fast and very precise help!
Kind regards,
Carl-Marius

"Unable to Access" error msg for BI Publisher Report

Hello All,
I am getting the following error when trying to access a BI Publisher report from the dashbaord. We can access the folders that come with BI Publisher examples, ie Executives, Financials, HR Manager but not the "GTR" that we have created.
Privelleges are the same. The folders have the same rights too.
This is for OBIEE 10.1.3.4 with BI Publisher of the same version, running on a solaris box.
Any thoughts.
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode:
faultString: Unable to access/Report not found: /GTR/Testing/QTD/QTD.xdo
faultActor:
faultNode:
faultDetail:
     {}oracle.apps.xdo.service.server.XMLPServiceException:null
     {http://xml.apache.org/axis/}exceptionName:oracle.apps.xdo.service.server.XMLPServiceException
     {http://xml.apache.org/axis/}hostname:jrc1vmsuapptst03
Unable to access/Report not found: /Grand Total Reports/Combined PNL/QTD/QTD.xdo
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
     at org.apache.axis.client.Call.invoke(Call.java:2748)
     at org.apache.axis.client.Call.invoke(Call.java:2424)
     at org.apache.axis.client.Call.invoke(Call.java:2347)
     at org.apache.axis.client.Call.invoke(Call.java:1804)
     at com.oracle.xmlns.oxp.service.report.xmlp.XMLPServiceSoapBindingStub.getReportMetadata(XMLPServiceSoapBindingStub.java:633)
     at com.siebel.analytics.web.sawreporting.XmlPublisherRpcGetReportMetadata.processMessageInternal(XmlPublisherRpcGetReportMetadata.java:91)
     at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:107)
     at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:175)
     at com.siebel.analytics.javahost.Listener$Job.run(Listener.java:223)
     at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:205)
     at com.siebel.analytics.javahost.standalone.SAJobManagerImpl$1.run(SAJobManagerImpl.java:153)
     at java.lang.Thread.run(Thread.java:595)

more info...
when i create a new folder in Publisher, I also get the same error msg.

Error when making an image backup to external harddrive: Files on Z-drive unable to access.

Hello, this is the 3rd time I have this problem. Every time after a major Windows (mine is Vista) update R&R does no longer work.
When I start to create a full image back-up I get some 2 times 5 error messages saying something like: Unable to access or copy to/from
5 times the message z:\tvtos\winpe.wim error 1393 = disk structure problem er something
5 times the message z:\Preload\drivers\E1e5032.SYS Error 5 no access
I may or may not get a message: " Fcopier MFC application is not functioning" (during the copy to/from z: ),
then after 30 minutes the backup gets cancelled automatically.
I assume the Z disk is a virtual memory disk.
I had stopped my virusprotection, firewall software.
I have run this as Administartor
The problem is the same when I run the R&R as Administrator ( I am).
Then after tens of minutes the backup operation gets automatically cancelled.
I have not been able to find a fix for this problem, but before it was fixed by a Lenovo R&R update.
Thanks,

Lenovo Toolbox Warning:
No system backup has been made for the past 212 days.. and counting
I really do not understand this Lenovo support attitude. How can anybody that is customer focused and enjoys his/her job, just fully ignore a customer problems ??
Only one retired employee that is interested (thanks for that) but can not do much.

In Premiere Elements 11 I get this error message, unable to access location sequence 01/for creating

The total error message is: unable to access location sequence 01/for creating temporary burning files
What is this and how do I fix it.

Some of this may be for Premiere Pro, but the IDEAS are the same for all Adobe software
I am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
Mac and Root User http://forums.adobe.com/thread/879931 -and http://forums.adobe.com/thread/940869?tstart=0
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
Mac 10.8.2 Bug w/PreElements http://forums.adobe.com/thread/1202216
Mac FONTS w/PrElements-11 http://forums.adobe.com/thread/1201281
External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?

Hey thomashfrompa,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the

I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the other copy of Lightroom before trying to launch" The problem is, that I can only see one copy of LR5 open and cannot locate the ".lrcat.lock" file for the specific catalog I want to open. I have tried re-booting my computer, but this did not work.

Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU

Get certificate error trying to access yahoo mail, and there is no exception to bypass the error.

I am getting a certificate error trying to access https://mail.yahoo.com. Unlike most other certificate errors, there is no option for "I understand the risks" to add an exception for the page, just the following:
mail.yahoo.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer)
I tried setting the proxy to "no proxy" under Advanced settings, as well as clearing all cookies and other cache history. Did not resolve the problem. I cannot access my email.

hello, which security program is running on your computer?

Unable to access or view data with no authorization error

Hi Experts,
Appreciate your guys help. I am ID administrator where by some of our user ID unable to view data/ display report for the some of data even the appropriate authorization already assigned to the user. However when we check in the transaction SU53 - authorization checking no error shown!
There is a case whereby user report that his ID (e.g. SAP ID = ABC) unable to access a transaction or infotype data for example HR infotype masterdata,upon checking there is no authorazition error (checked insu53), when copy the ID (ABC) to another new ID (ABC1) with no changes on the roles, the ABC1 ID able to access the said transaction.However, when copy back ABC1 to the ABC (naming conversion only), the ABC ID still unable to access the transaction with no authorization error. the
main problem here is the original ID is not working, but works fine if it is copied to another ID name.
Kindly advice.

Hi Manikya Raju,
Can you explain details?

Webmin: Unable to access - Certificate error

Similar Messages

Maybe you are looking for