Webserver- r12.1.3

Hai all,
We have EBS 12.1.3 fresh installation with 2 Webservers as internal webtier and 2 in DMZ. What component need to be there in webtier ?. Can I clone the HTTP component alone to webtier ? any additional licensing required ?

936074 wrote:
Hai all,
We have EBS 12.1.3 fresh installation with 2 Webservers as internal webtier and 2 in DMZ. What component need to be there in webtier ?. Can I clone the HTTP component alone to webtier ? any additional licensing required ?Please see these docs.
Oracle E-Business Suite R12 Configuration in a DMZ [ID 380490.1]
Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
No additional license is required, however please contact your Oracle sales representative for license questions.
Thanks,
Hussein

Similar Messages

  • Serverstats for Oracle E-Business Suite R12

    Hi,
    I am setting up some serverstat monitors for performance tests on Oracle E-Business Suite R12 application (for benchmarking and tuning). I have set up some monitors for measuring CPU and memory on the Webserver, Application server(both Oracle App server 10) and Database(Oracle 10g). Also I have set up monitors for the V$SYSSTAT & V$SESSTAT views for the database.
    What other monitors should I set up for monitoring the E-business suite application.
    Any advice from your experience would be very helpful.
    Regards
    CP

    Hi,
    You will just have to add the monitor profiles for linux in your OLT. You will need a user in your webserver who can run commands for iostat,vmstat,netstat, sar or whatever other monitors you want to set up. You can also set up virtual agent in Serverstats to run these commands individually using the user on webserver. If you have any more questions, you can post it here.
    Please go through the Serverstats guide that comes with OATS installation to know more about setting up monitors.

  • R12.1 url without the port number using dns

    Hi guys
    Thanks in advance,
    What are the steps to setup R12.1 using url with dns so that you don't have to specify the port number while connecting.
    Thanks again

    Hi,
    Please see this thread.
    How to setup webserver in R12 so as to enable users not to enter the port
    Re: How to setup webserver in R12 so as to enable users not to enter the port
    Regards,
    Hussein

  • R12 and Sun JRE question

    Just a quick question related to the Sun JRE and R12 .. We recently upgrade from 11.5.10.2 to 12.1.3 ..
    We are still in testing mode but everything appears to be working fine so far ..
    One thing we noticed is that we are using the Sun JRE 1.6_18 on our PC's and we have 1.6_07 on the Web server environment files.
    ex: in the .xml s_sun_plugin_ver">1.6.0_07
    We also had to disable the Next Generation feature in the SUN JRE 1.6_18 because of different issues already known in metalink.
    As far as I know the Sun JRE version in the Webserver only indicates the lowest version that can be used on PC's, all our PC use version 1.6.0_18
    Is there any advantage in running the "txkSetPLugin.sh 16018" to bring the Webserver at 1.6.0_18 instead of 1.6.0_07 ?
    Or can we just leave the webserver version at 1.6.0_07 ? as all our PC's use only one version of the Sun JRE which is 1.6.0._18
    Thanks

    When reading note 393931.1, it appears that the version in the Webserver config files, only dicates the lowest version that can be used on the PCs , in our case we only have one version 1.6_18 on our PCs , so I assume that having version 1.6_07 or 1.6_18 in the Web config files should not make any difference in our case ?It is always recommended you have the same version of Jinitiator/JRE on the web server and the client machines. Not sure about the list of advantages, so you may log a SR for this.
    Also Note 393931.1 mentions patch 4377566, but the readme for this patch mentions the following:
    APPLICATIONS INTEROPERABILITY PATCH FOR JRE1.5.0_x PLUGIN
    So is this patch also applicable to JRE 1.6 ?This is a small patch, so I would recommend applying it.
    Thanks,
    Hussein

  • Graph is not getting displayed in R12

    Hello folks,
    Cureently m working on R12 upgrade project.
    And we have a report which is working fine 12 but the graphs are not getting displayed as like 11i.
    Could you plz any one help how to fix the issue.
    Note: There is no error is coming up. But in the graph part , graph is not getting displayed.
    Regards,
    Krishna

    Hello folks,
    Cureently m working on R12 upgrade project.
    And we have a report which is working fine 12 but the graphs are not getting displayed as like 11i.
    Could you plz any one help how to fix the issue.
    Note: There is no error is coming up. But in the graph part , graph is not getting displayed.
    Regards,
    Krishna

  • SSL TEST IN R12

    Hi,
    we are about to implement SSL in ebs r12.0.4 to ensure that the user name and password get passed over the browser as encrypted(by default which is passed as simple text).
    Now i am following metalink document Enabling SSL in Release 12 [ID 376700.1]
    Initially i was testing with the demo certifcatest at the $INST_TOP/certs/Apache.
    All the middle tier setups has been done.Then when i restarted the Application and tried to connect my url that get redirected to the SSL port correctly but then failed with following:--
    500 Internal Server Error
    java.lang.NoClassDefFoundError     at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120)     
    at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:161)     
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231)     
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617)     
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541)     
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)     
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740)     
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)     
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)     
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)     
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)     
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)     
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)     
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)     
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)     
    at java.lang.Thread.run(Thread.java:595)Please help.
    Edited by: Susmit on Dec 24, 2010 4:24 PM

    Hi;
    please check below notes:
    "500 Internal Server Error - java.lang.NoClassDefFoundError: oracle.apps.fnd.profiles.Profiles" on 10G [ID 567554.1]
    R12: Troubleshooting 500 Internal Server Error in Oracle E-Business suite [ID 813523.1]
    Regard
    Helios

  • 11i to r12 Conversion - help needed

    Hi
    My client is doing re-implementation of r12 and migrating from 11i to r12. I need help particularly on conversions side. The client is a SaaS company. they are considering to bring open and history transactions and applied/unapplied receipts to r12 AR.
    - how to migrate revenue scheduled open/closed invoices from 11i to r12 since rev schedules for a SaaS company is expected to be long terms. and how to make sure that rev schedules are correct upon migration to r12??
    - for partially paid invoices how to make sure that the same partially paid amount reflects in r12 upon conversion? can a negative line amount equalling to paid amount be a possible solution??
    - upon migration do the closed invoices have to be converted as open and receipts re-applied after migration in r12 or they can be brought in as-is with status closed?
    - if customer paid for an invoice using a credit card in 11i and upon migration it came to notice that the credit card is no longer used by the customer so how to re-apply the same receipt in r12 which was applied in 11i using that credit card. do we have to enable it in r12 just for closing the invoice? what could be possibilities?
    please anyone if can answer would be very helpful
    Thanks
    -MS

    It depends on the dpi. Usually 72dpi = 72 pixels per inch.
    1000/72 = 13,88888 inch
    1 inch = 25,4 mm
    13,88888 * 25,4 = 352,7777 mm
    You do the arithmatic with a calculator.
    To do the same with pictures, you can do it in any image editor. Even Preview.app :
    !http://www.wyodor.net/_Discussions/PreviewResize.png!

  • Data migration b/w r11 and r12

    Hi,
    the place i worked have boht R11 & R12 intances, i need to move some clients (shared service cnetre) from r11 to r12. In terms fo data i.e. AP, AR & GL. i need to find a quick way around.
    My concern is
    1) should i just move the Open POs if yes /no then y
    2) how about customers and suppliers
    3)Open & closed invoices (AR)
    used to do balance tranfer, but there are some complications and is time consuming as well. Please share your thoughts and experience on above and if possible a step by step process that you know or have used

    Dear Renny,
    1) Identify the data source used
    2) Use transaction RSA3 in BW and R/3 for this datasource.
    3) Try to test data for a month say May 2007
    4) If it is the same, may be you are not using proper selection conditions in the Infopackage.
    If it helps even a bit, do allocate *points
    regards
    Vinay

  • Use of open interface tables in R12

    Hello,
    Can someone tell me the status of using open interface tables in release 12. Is this still a supported mechanism for importing data into the product, or must you use a PL/SQL/Java API, XML gateway etc?
    iREP for 11.5.10 lists these open interface tables, but they are missing from the embedded iREP in R12. However, looking in the database for the RA_CUSTOMERS_INTERFACE_ALL shows that the tables exists. Is it supported to still use open interface tables, or are they just there for legacy upgrade purposes? If it is supported, where is the documentation for these R12 open interface tables?
    I wish to integrate into various modules using Oracle Data Integrator and it seems to only have 'integration knowledge modules' to support open interface tables.
    i look forward to your response.
    Cheers,
    John

    Hi Helios,
    Thanks for your response. Two of the links do not work.
    All I really need to know for sure is that R12 supports open interface tables.
    Perhaps I didn't use the embedded R12 iRep correctly - the standard view by product family certainly didn't show any open interface table, and they did not appear in the 'interface type' drop down list. However, I notice from an example on the web that you can pivot the results by interface type. I will try that when the environment becomes available again.
    cheers,
    John

  • Discoverer report not working on R12 !

    We have just migrated to R12 from 11i and some of the discoverer query is not working, but the same is working fine when we ran thru SQL Developer or TOAD.
    Is there any context (mo_global.set_policy_context) needs to be set in Discoverer report to get the data?
    Thanks

    Thanks Srini,
    There is no any specific error message, the strange thing is if I run the Discoverer report is not returning any data, but if I set the mo_global.set_policy_context ('S',111) in SQL Developer or TOAD and then run the discoverer report it return data...
    Any pointers?

  • Discoverer report with PO_RELEASES in R12

    Hi all,
    I'm migrating a Discoverer report from 11i to R12. The query of the folder uses the po_releases and this join condition "and rcv_transactions.po_release_id = po_releases.po_release_id(+)". When I run the report I get the error "invalid number" but when I tried the same query but using the po_releases_all it seems to work. Is this ok? I saw that in R12 po_releases is just a synonym, is this correct? I would appreciate your comments.
    Thanks in advance.
    Gabriela

    Thanks Hussein. Yes, I've checked the document you recomend, but the problem seems to be when I try to use po_releases, the synomy) and I don't know why it work with the _all table but not work with the synonym.                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How open multiple responsibilities in the same user login session in R12 ?

    Dear All,
    Can anyone help me to know how to open multiple responsibility in the same user login session in R12 ?
    Thanks..
    Edited by: G-oracle on Sep 18, 2011 11:22 AM

    Can anyone help me to know how to open multiple responsibility in the same user login session in R12 ?What do you mean by open multiple responsibilities in the same session? You can only see the menu of one responsibility at a time, so how to do you expect the application to let you see multiple responsibilities/menus in one session?
    You could open another session and this way you can access more than one responsibility at the same time.
    Thanks,
    Hussein

  • Error while accessing a form in Inventory resp in R12

    Hi all,
    I am getting the following error when I tried to access the Transactions--> receipts--> 'return' from Inventory responsibilty in oracle apps R12.
    'You are not set up as worker. To access this form you need to be a worker.' 
    Kindly inform me what needs to be done.
    Thanks in advance !
    Regards,
    Sukanya

    Check the other thread:
    How to compile a form In R12
    Re: How to compile a form In R12

  • Error  while running custom BI report in R12.1.1

    Hi All,
    We are encountering below error while running custom BI report in R12.1.1...
    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
    APPLLCSP Environment Variable set to :
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Enter Password:
    MSG-00001: started report
    REP-1401: '': Fatal PL/SQL error occurred.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-1401: '': Fatal PL/SQL error occurred.
    Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
    Please let us know how to fix this error.
    Thanks
    Praveen

    Hi Praveen,
    Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
    REP-1401: '': Fatal PL/SQL error occurred.

  • Error while opening a form after R12 install

    Hi,
    I have installed EBS R12.0.4 on linux. The install is successful and i am able to login. But when I am trying to open a forms session I am getting an error "Unknown plugin (application/x-java-applet;jpi-version=1.5.0_13)". I am using Mozilla Firefox 3 beat 5. The browser is unable to find the java plugin required to open a forms based session.
    Can anyone let me know the reason & provide the steps to install the required plugin?
    Thanks,
    Amit

    Hi Amit,
    You need to have a valid entry in the hosts file (under %Windows%\system32\drivers\etc directory) as follows:
    <IP Address> <hostname.domainname>
    IP Address: is the IP Address of the machine where Oracle Apps is installed
    hostname.domainname: is the hostname and the domaninname where Oracle Apps is installed
    From IE, add the application URL to the trusted sites list and access the login page from the following URL:
    http://<hostname>.<domainname>:<port>/OA_HTML/AppsLogin
    To access the application from Firefox, install the missing plugin from the following URL, then you should be able to access the application using the URL posted above.
    http://<hostname>:<port>/OA_HTML/oaj2se.exe
    If you have Metalink access, please refer to the note referenced in my previous reply for more details.
    Regards,
    Hussein

Maybe you are looking for