Webservice asking for PI ESR credentials

Dear All,
We have a new SAP ECC testing server configured. We have created a client proxy in this server and on explicit testing it works fine. But when we are calling this proxy through a program then it is trying to look for PI credentials .
We want to test this webservice explicitly and don't want that it should ask for PI server, for this we have removed all connection of this server with PI server and no ESR/SLD is connected but still it is looking for the connection.
Please let me know how can we resolve this error.
Reg,
NJ

hi,
Your explanation is litle by confused.
1. Does you flow is: ECC(proxy) -> PI -> Ext (Web serice) ?
2. And have your error in ECC? (I think) or in PI ?
If it's in ECC, please see following points.
1. In SXMB_ADM > Integration Engine Configuration. click on button "specific configuration".
Under Category=RUNTIME and parameter=IS_URL, pick-up the RFC Destination channel used from your ECC to your PI.
Example: dest://MyRFCDestination.
2. Then go to SM59, for this RFC destination (type "H"), do a connexion test. Have you a popup on which you have to provide a PI user credentials?
if it's either because in this RFC destination you do not a good user type. (for instance use PIISUSER, defined in PI).
or it's perhaps your user is locked in PI.
regards.
Mickael

Similar Messages

  • Windows keeps on asking for my user credentials

    Hi.
    As per subject, I keep on getting prompted to enter my user credentials whenever I open a mapped drive (which has been mapped before with the same credentials) or when I open the SharePoint site and also when
    I check out and edit a document from SharePoint.
    This is becoming debilitating.
    I have a very lengthy password as per our policy so I'm really despondent to have to enter this password every single time I access SharePoint.
    In the past, I only got prompted once during every session. Now, I get prompted multiple times a day. I will be prompted when I access SharePoint and then 10 seconds later, be prompted AGAIN when I check out and edit a document....WHAT?!
    I keep on selecting the checkbox "remember credentials" but this is to no avail. I've deleted all the credentials in Credential Manager numerous times and added them manually and then again automatically, all to no avail. I've even tried multiple
    entries for example "192.168.1.1" and also "http://192.168.1.1" as well as the FQDN for example "server01". So the same network resource has 3-4 different entries and none work!!
    Whenever I enter my credentials and select that checkbox to remember them, I can see in Credential Manager that the respective entries gets updated but what's the point if they are never utilized?
    I've also checked the services and changed the Credential Manager to start automatically without delay.
    I have appealed for help elsewhere (WindowsForums, SpiceWorks, TechRepublic) but no one seems to have any definitive answers or solutions. I've been having this issue for YEARS now but want to do something about it now as it's becoming debilitating.
    Please help!
    Setup:
    Windows 7, 64bit
    Office 2010 (I'm testing Office 2013 as well)
    SharePoint 2010
    Service Pack 1

    Hi,
    "Multiple logon prompt issue" can be caused by many factors, please take a look of this blog:
    Multiple Logon while open office Document from SharePoint
    http://blogs.technet.com/b/steve_chen/archive/2010/06/25/multiple-logon-while-open-office-document-from-sharepoint.aspx
    You can bypassing your proxy server for local addresses or adding a team Web site to the list of trusted intranet sites for a test, steps are listed in this link
    Troubleshooting: I Keep Getting Prompted for a User Name and Password
    http://technet.microsoft.com/en-us/library/cc750194.aspx
    Sometimes, when a Intranet site is identified as an Internet site, it will cause Internet Explorer to prompt you for credentials when you access the intranet Web sites that require authentication
    Intranet site is identified as an Internet site when you use an FQDN or an IP address
    http://support.microsoft.com/kb/303650/en-us
    Yolanda Zhu
    TechNet Community Support

  • Messages keeps asking for yahoo login credentials

    I just recently started using more of the in built apps such as mail and message and I'm now reminded why I chose not to in the first place.
    Yahoo is having difficulty remaining connected, I keep getting the wrong credentials pop up window every now and then after I fixed the issue, so far the only solution I found was to remove all internet accounts then re-add them but this will be the second time I've done this today. I've read some forums threads that suggest that it's an issue with the outgoing STMP or something.
    I'v tried removing all associated keychains > verify disk, removing the Yahoo account and re-entering the mail server details in Mail app.

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages

  • SSO Authentication asking us to enter credentials for the first time.

    Hi Experts,
    We have implemented SSO using kerberos authentication to our Windows ADS Server. It was working fine quite for few months and able to loging in without entering the credentials.
    Now, after every restart of my PC (client machine) it asks for the user credentials for once. After that it is not asking for credentials again.
    Its asking once only when i restarted the machine.
    Could anyone help me to resolve this. we dont want to enter the credentials atleast for once also.
    We are on Netweaver 2004s SP17.
    Thanks in advance
    Best Regards
    Sunil

    Hi Sunil,
    one idea would be to check whether you have all the necessary Kerberos Tickets, especially the Ticket Granting Ticket (TGT).
    A tool for this check is klist which is part of the MS Windows Resource Kit.
    You would kave to copy klist to your client, open a cmd box, jump to the directory where you have copied klist, and enter klist tgt to check the tgt, and klist tickets to check the service tickets.
    Best regards,
    Jochen

  • Unable to open a report and asking for user credentials

    Hi,
    when i am trying to open a crystal report, i am asking for user credentials and my URL is directed to the below URL
    http://hostname/PlatformServices/service/app/logon.do?appKind=InfoView&service=%2FOpenDocument%2FappService.do&backContext=%2FOpenDocument&backUrl=%2Fopendoc%2FopenDocument.jsp%3FSERVICE%3D%252FOpenDocument%252FappService.do%26OBJIDS%3D20016421%26backUrl%3D%252Fcontent%252Fview.do%26PREF%3DmaxOpageUt%253D200%253BmaxOpageC%253D10%253Btz%253DUS%252FPacific%253BmUnit%253Dinch%253BshowFilters%253Dtrue%253BsmtpFrom%253Dtrue%253BpromptForUnsavedData%253Dtrue%253B%26CONTAINERID%3D6424083%26backContext%3D%252FPlatformServices%26LOC%3Den%26APPKIND%3DInfoView%26PVL%3Den%26ACTID%3D280%26service%3Dtimeout&backUrlParents=1&appName=OpenDocument&prodName=BusinessObjects+Enterprise&cmsVisible=false&cms=servername%3A6600&authenticationVisible=false&authType=secEnterprise&sso=false&sm=true&smAuth=secLDAP&persistCookies=true&sessionCookie=true&useLogonToken=true
    Please help me on this

    Hi,
            This is happening to all of the users. And this kind of behaviour is happening frequently to most of the users but as for me and some of us this is not happening frequently.
    And we are using Crystal Reports 2008 ie. CR12.
    -VinodC

  • How do you stop BSPs on WebSEAL for asking for user-credentials?

    Hi
    We are currently having an issue with BSP Pages. When we test the BSP pages on the R/3 system they work OK. When we test them directly on the Portal then they too also work. The problem is that they are not working properly on our Intranet.
    The intranet that we use is an IBM Tivoli product (also known as WebSEAL). We currently have WebSEAL SSO to our SAP Portal. This is working OK. When we use WebSEAL to access the portal we are prompted to enter our user-id and password so that the BSP page can be displayed. This should not be happening and it defeats the purpose of SSO. I have attached a screen shot document to demonstate this.
    Some time ago we had a similar issue where the transactions on the portal (when executed from WebSEAL) were giving us a Webdynpro time-out error. I later determined that the cookie information was not being passed to WebSEAL. To fix this, I went to the Visual Administrator and went to server >> services >> web container and for the web container "sap.com/irj" I went to the cookie configuration to add a session cookie. By doing this I fixed my previous problem.
    Coming back to my problem, I had a junction created in WebSEAL to point to the bsp directory (sap/bc/sap/bsp/*) on the host concerned. I had both a SSL and TCP junction created both resulted in error messages - stating that the client (SAP) is asking for user credentials.
    Hoping that I have provided enough information above my question is as follows:
    (1) How can I get the BSP messages to work on WebSEAL such that it will not ask for user credentials to be entered? Would this involve making a further change to a Web Container? If so - which container also needs a session cookie to be generated?
    Thanks
    Kind Regards
    Rajdeep Kumar

    Hi Peter
    I am having an issue with the re-direct and am hoping you might be able to provide a little assistance. If not then not to worry.
    My security department have logged a call with IBM 2 days ago yet have not received any response.
    In your document you mention that you need to have a junction to AS-JAVA and a junction to AS-ABAP.
    We have created the junctions "/sapep" (for AS-JAVA) and "saphr1" (for AS-ABAP).
    The junction /sapep" also contains the junction mapping entries "/irj/" and "/SSOTicket/".
    The direct URL to the hidden image is : https://uadsfi01.auiag.corp:53001/SSOTicket/1x1.gif. I have tested this (using my user id and password) and it works OK.
    When testing the image through TAM (https://test.insideiaghome.iaglimited.net/sapep/SSOTicket/1x1.gif) we get an "unexpected authentication challenge"
    I have reviewed the log below and it seems that we are having an authentication issue with the image:
    ==(START OF LOG)==
    2008-06-16-19:59:58.365+10:00I----- thread(136) trace.pdweb.debug:2 /sand/cholt/laura_amweb510_11LA/src/pdweb/wand/wand/log.c:309: -
    PD ===> BackEnd -
    Thread_ID:52943
    GET /SSOTicket/1x1.gif HTTP/1.1
    via: HTTP/1.1 uattam01:443
    host: uadsfi01.auiag.corp:53001
    user-agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; MS-RTC LM 8; .NET CLR 2.0.50727)
    iv_server_name: uatin1-webseald-uattam01
    accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, /
    iagsapid: 52975
    accept-language: en-au
    referer: https://test.insideiaghome.iaglimited.net/sapabap.html
    connection: close
    iv-user: s52975
    2008-06-16-19:59:58.373+10:00I----- thread(136) trace.pdweb.debug:2 /sand/cholt/laura_amweb510_11LA/src/pdweb/wand/wand/log.c:309: -
    PD <=== BackEnd -
    Thread_ID:52943
    HTTP/1.1 401 Unauthorized
    content-type: text/html
    date: Mon, 16 Jun 2008 09:59:58 GMT
    cache-control: no-cache
    content-length: 1787
    www-authenticate: Basic realm="Upload Protected Area"
    server: SAP J2EE Engine/7.00
    expires: 0
    pragma: no-cache
    connection: close
    ==(END OF LOG)==
    When logging into the SAP Portal directly general user ids have no problem accessing this (Non-Administrator portal users), however through Tivoli it is causing an issue.
    Do you know what may be causing this issue?
    Thanks in advance for any assistance you can offer.
    Kind Regards
    Rajdeep Kumar

  • Hi All,  I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"  I run a test print and its se

    Hi All, 
    I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
    I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
    Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
    every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
    I tried
    - lpd printing = "authentication required"
    - reset printer settings ang re-install printer = "authentication required"
    - replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
    This stuff never happened to Mini1.

    Hi All, 
    I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
    I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
    Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
    every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
    I tried
    - lpd printing = "authentication required"
    - reset printer settings ang re-install printer = "authentication required"
    - replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
    This stuff never happened to Mini1.

  • Recently I logout from App Store and immediately I logged .after that I clicked the FaceTime and it is asking for signin.so I entered the credentials and clicked on signin .at that I got one pop up like rupees 5 deducted from your carrier account

    Recently I logout from App Store and immediately I logged into the App Store .After that I clicked the FaceTime and it is asking for signin.so I entered the credentials and clicked on signin .at that moment I got one pop up like rupees 5/- deducted from your carrier account
    from that moment onwards its keep on deducting the amount from mobile money account.its nothing but when I am enable the feature like FaceTime and imessage you are keep on deducting the amount from the carrier account
    actually I can use the FaceTime and iMessage through internet right
    then how can you deduct the amount from carrier even if the Internet is on in my mobile
    can you please resolve this issue asap
    iam facing this issue from so many days
    but today very frequently the amount got deducted
    if you need any information regarding this please let me know
    i facing so many problem in my iPhone after installing iOS 7.0
    from that time onwards repeadtly facing the performance issues
    can you please check it with high priority
    actualy now I'm not even switch on the Internet because of money deduction every time of rupees 5/-
    one more issue was if iam trying to on the cellular data ,when i on the cellular data I.e., 2Giam not getting the internet
    if enable the 3G and off it immediatly then I am getting Internet for that day
    one that day if I off and on the cellular data,then it works correctly

    Recently I logout from App Store and immediately I logged into the App Store .After that I clicked the FaceTime and it is asking for signin.so I entered the credentials and clicked on signin .at that moment I got one pop up like rupees 5/- deducted from your carrier account
    from that moment onwards its keep on deducting the amount from mobile money account.its nothing but when I am enable the feature like FaceTime and imessage you are keep on deducting the amount from the carrier account
    actually I can use the FaceTime and iMessage through internet right
    then how can you deduct the amount from carrier even if the Internet is on in my mobile
    can you please resolve this issue asap
    iam facing this issue from so many days
    but today very frequently the amount got deducted
    if you need any information regarding this please let me know
    i facing so many problem in my iPhone after installing iOS 7.0
    from that time onwards repeadtly facing the performance issues
    can you please check it with high priority
    actualy now I'm not even switch on the Internet because of money deduction every time of rupees 5/-
    one more issue was if iam trying to on the cellular data ,when i on the cellular data I.e., 2Giam not getting the internet
    if enable the 3G and off it immediatly then I am getting Internet for that day
    one that day if I off and on the cellular data,then it works correctly

  • Not being asked for credentials in SSRS 2008 R2 for Firefox and Safari

    I have an instance of SSRS 2008 that is currently working on all browsers (the URL is something like reports.foo/reports).
    I spun up a new instance of SSRS and placed it on the url report01.foo/reports.  This new instance is connected to a different domain (I am spining up a Active Directory Domain and trying to build out our infrastructure, so the logins are different). 
    I am able to access the new URL (report01.foo/reports) from IE and Chrome.  It is asking for the username/password and able to get on just fine.
    However, when I try to go to the new URL (report01.foo/reports) using Safari and Firefox, it never asks for credentials and shows a blank page.  This does not happen for the old URL (reports.foo/reports), only the new URL.
    Any ideas?

    Hi Ben,
    Per my understanding that you have configured windows authentication and which by default will not prompt for credential. So I assumed you have changed the User Authentication setting in the security setting to pop up for credential, for example like below(IE),
    If so, your issue about the pop up credetial not pop up in Firefox and Safari can be caused by the related security setting, If you give Anonymous User rights, you may got the blank page:
    Details information about similar issue in threads below for your reference:
    how to change reporting service site seurity setting?
    SSRS in firefox not asking for credentials
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • I am unable to download my PDF. It is asking for my adobe livecycle rights management credentials. I have no clue what that is. I am using a PC windows7. Please help me.

    I am unable to download my PDF. It is asking for my adobe livecycle rights management credentials. I have no clue what that is. I am using a PC windows7. Please help me.

    Downloading from where?  How exactly are you downloading?
    Can you post a screenshot of that message: https://forums.adobe.com/thread/1070933

  • Lync 2010 client asks for credentials when outside of corporate network.

    Hello, 
    We are running Lync 2010 Enterprise. Everytime our Lync users are outside of our network and they log in to their Lync client, they get a pop-up window asking for credentials. When they log into Lync inside our network the Lync client connects automatically
    without asking for credentials. Is this normal behavior? I assumed that the Lync client would behave exactly no matter where they were connecting from. They are using Lync 2010 client on domain joined laptops, I would assume the Lync client would just use
    the same credentials they used to log in to their computers and not ask for anything. Please let me know if there is a way to stop the pop-up from showing up when people try to connect to Lync from outside our network. 
    Thanks for any help!

    Outside of the network the credential popup is for Exchange web services on the back end to check calendar info, contact lookup, etc.  If Lync is already logged in when they see the popup, this is normal behavior. 
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Outlook asks for credentials 2 times

    Hello,
    I'm in the middle of a transition from SBS 2011 to 2012 R2. Currently Exchange 2010 and 2013 co-exists. Every time I start Outlook (2013)  it asks for credentials. If I use [email protected] format it does not accept. If I use domain\user format, I
    have to enter it 2 or 3 times, then Outlook works fine.
    OWA, AS, mail flow seems to be working.
    What can cause the password prompt?
    TIA

    Try out the following fixes:
    Try to recreate the outlook profiles. Also, Check "Credential Manager" in Control Panel to see if there are any old entries for Outlook.
    Refer: http://myitforum.com/myitforumwp/2013/02/05/solution-outlook-200720102013365-prompts-me-for-credentials-each-time-i-open/
    Change the authentication to NTLM instead of Basic Authentication and see if this makes a difference.
    Uncheck the Exchange proxy settings
    Uncheck the "Download shared folders"
    File -> account settings ->account settings -> Edit.. (account) -> More settings... (button on the bottom) -> Advanced (tab) -> Un-tick "Download shared folders"

  • One server in the tree asks for credentials

    Hi,
    On Windows 7 with Novell client 2 SP3 (IR3), I am able to type \\SERVERA in the file explorer and I am connected to this server. However, typing \\SERVERB (which is in the same tree) asks for my credentials. This happens not only on my workstation.
    If I reboot SERVERB, all is fine for some days, but the problem comes back. I suspect that one of the novell processes is dying but I cannot see which one.
    thanks,
    Marc Delisle

    Originally Posted by lem9
    After enabling ncp debug logging and watching the two logs, I see nothing happenning when I try to connect on my workstation with \\SERVERB. Connecting to NRM as "root" on this server works fine.
    If the logs show nothing at all, then I'd say the culprit is ncp or ncpengine died or is having issues.
    Normally it would log things and you'll see the userid and attempts to access files, etc. showing up.
    You may need to open an SR to figure out why ncp is dying.
    I'm not sure if you can restart the ncp processes, to be honest, and maybe that would show something.
    NRM doesn't use ncp for authentication, that I'm aware of. If you use a non-root user I believe it uses LUM at that point.

  • App is asking for credentials

    Hi all,
    I am facing userid/password with my app.Its has 3 components. First one is main application, second one is database utility and third is the monitoring tool for the application.This app is deployed on WLS 9.2 MP3. Recently we patched this MP3. few days ago we configured your database utility and restarted it. And now when we try to use the third,monitoring tool component is asking for userid and password.we tried everything but its not working.Its was not asking credentials earlier.We checked the logs and found the following error. Any one have idea what might be the problem?
    <[weblogic.servlet.internal.WebAppServletContext@1563502 - appName: 'xxxxxgt', name: 'xxxxxgmt', context-path: '/prsysmgmt'] Servlet failed with Exception
    java.lang.NullPointerException
         at jsp_servlet._jsp._services.__modifynode._jspService(__modifynode.java:209)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:395)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:309)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:176)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:533)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:266)
         at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1070)
         at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:281)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1483)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:508)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:857)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:176)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3244)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    >
    ####<Jun 8, 2010 7:52:09 AM PDT> <Error> <HTTP> <wsrt3342> <xxxxxmgt> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1276008729029> <BEA-101020> <[weblogic.servlet.internal.WebAppServletContext@1563502 - appName: 'xxxxxgmtmgt', name: 'prsysmgmt', context-path: '/prsysmgmt'] Servlet failed with Exception
    java.lang.NullPointerException
         at jsp_servlet._jsp._services.__modifynode._jspService(__modifynode.java:209)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:176)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:533)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:266)
         at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1070)
         at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:281)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1483)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:508)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:857)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:176)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3244)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Thanking you for your help in advance.

    The developer only needs your UDID so he can send you Ad-Hoc builds of your app which you can then install via iTunes.
    He does not need nor should you ever give him (or anyone else) your Apple ID and password.

  • WebService Publication asks for user and password

    Hello,
    I have a WebService with No Authentication.
    The problem is that when I try to open the WSDL in the WebBrowser SAP asks for User and Password of the WebAS.
    I have tried to Consume the WS through a 3rd application and when I try to consume it user and password is needed and the WS has no authentication.
    I have read this topic:
    Roles for SOAMANAGER
    And the basis guy told me he has already done that configuration so If you know how to solve this problem I will be very grateful if you post it.
    Thanx in advanced.

    Hi,
    SAP Web Application Server requires a username and password. This makes sense. Even if your web service is has No Authentication, you still have to access the server.
    How to bypass this.....
    Try reading the link given above.

Maybe you are looking for