WebService monitoring & Status in PI system

Hi Experts,
Kindly help to find out WebService status(down or running) and Monitored WebService in PI system Java stack Only.
Regards,
Srini

You can check them from CCMS/RZ20 as Reagan Benjamin and Deepak Kori have said.
You can use technical and PI monitoring in additional to this, if you have solman 7.1
And the easiest way is below:
https://help.sap.com/saphelp_nw73/helpdata/en/94/e1cff0617843349330288eab5437e9/content.htm
Divyanshu

Similar Messages

Approval process monitor status turn to "Initiated" instead of "Pending", so awe is not routed

When I submit a transaction, after successful submission in approval process monitor the status has turn "Initiated" instead of "Pending". That's why it's showing "Not Routed" for the next approving person. So that worklist is not populated.
Please suggest me to resolve this issue.
Process Monitor as follows after submission:
Separation Approval Process (Stage)
Initiated (Monitor status)
Approval Routing from Unit HR (Path)
Not Routed    (Step)                                                    Not Routed      (Step)
Multiple Approvers                                                     Multiple Approvers
STATEHR ROLEUSER SEPARATION                              Central Hr
(Userlist)                                                                        (Userlist)

Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
-Ramesh

Delivering Status in Messaging system

Hi,
I am monitoring messages in messaging system. I can see some message status as "Delivering" from so many days. I am unable to delete those messages. It is not even changing to undelivered status. Please help.
Thanks,
Gunasree

Hi Gunasree,
The messages in the DELIVERING status can not be cancelled. The messages might have gone to delivering stage due to many reasons. If some earlier message got failed in the queue or the connection between the Receiver and adapter engine break...or some other reason.
For messages in the delivering status it can be cancelled by stopping the adapter engine only.
Thanks
Ajay

Monitor status is yellow for many days

Hi All,
I am extracting data from CRM and when I try to extract data for both master data objects and cubes, the monitor status is in yellow for many hours and not getting changed.
Result: data is not come to BW.
Observation:
1) In source system the job is not getting started for ALEREMOTE_CR user and always in ready mode.
2) In monitor screen in BW when I click on OLTP push button, system not allowing me to enter in to Source system and saying check the connection parameters. (Source system connection check is OK)
Kindly look in to this and feel free to contact me for any explanation is required.
Regards,
venkat.mahipathi
[email protected]
09886652422
Edited by: siva reddy on Jan 28, 2008 8:24 AM

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load).
5) SM58 and BD87 for pending tRFCs
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the new data table.
Thanks,
JituK

Monitoring Status is Still Gray [Not Performed] When Technical Monitoring Setup DOne

Dear SAP Expert,
I have problem when setup technical monitoring SAP system through t-code SOLMAN_SETUP in Solman.
Managed system configuration (satellite system) was configured with green indicator for all steps.
Technical monitoring (system monitoring) steps were configured also with green indicator for all steps.
After configure technical monitoring, i found the status of monitoring status for that satellite system still gray (not performed).
And after 2 day the status is not changed yet to another indicator.
There is no problem with network firewall and server firewall.
Is there anyone of you have experience to solve this problem?
Please help me to solve this problem.
Thanks & regards,
Husin.

Hi Husin,
If the status is still grey please re-execute the steps mentioned in SAP note 1819848 - All metrics are grey in Technical Monitoring to see if this helps.
Kind regards,
Roland

Technical monitoring status shows grey

Hello,
Checking the technical monitoring status, it shows grey
Checked the error & it shows the extractor not executed.
When checking the extractor status, its executed for host & not for the ABAP instance. Please assist.
Other systems have the extractor info as below
Thanks,

Hi Magesh,
Pls refer below notes & links
1853160-Grey Host Metrics in Technical monitoring
System Monitoring grey status
SOLMAN 7.1 Technical Monitoring - System Monitoring - Host Grey
Regards
K.N

I have a L7680 All in with two new print heads but the new cyan/magenta shows yellow monitor status.

I have a L7680 All in with two new print heads but the new cyan/magenta shows yellow monitor status. Ink status, cyan more than 50% and magenta is a 25% w/no low ink warnings... Just ran a clean print head again, print out looks good now but the status of the new cyan/magenta shows yellow monitor status. Is it time to buy another..When I purchased this printer it had to be replaced 3 times because of problems... Just a lemon?
thx for your help in advance...
Jim

Could you share a link to the page?
Seeing it in context and in our browsers is much easier to debug.
If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

Performance monitoring in a multitier system

Hello,
Is it possible to identify a session by a service name (for performance monitoring) in a multitier system? I mean, the session of an X user precisely.
Thank you.

>
Is it possible to identify a session by a service name (for performance monitoring) in a multitier system? I mean, the session of an X user precisely. The critical thing here is whether you have control over the code or not - what's
your situation?
If you do have control, then instrument your code.
If not, you can use a monitoring framework - say Nagios - but don't forget the old
traditionals such as syslogd and logging different component messages to a
central logging server. Don't neglect the OS native tools. The problem with these
is that it is difficult to tie one particular session to performance problems.
Having a test system is also a very* good idea - you can run just one session and
see exactly what's happening in a given situation. In fact, if you don't have a test system,
your first* priority after reading this post should be to implement one.
Paul...

Does two seperate client required if the solman monitors DEV and QAS system

Hi All,
This is our client landscape:
1 Dev-SolMan->For all development and quality systems(ECC 6.0, BI and EP).
1 PRD-SolMan->For all production systems(ECC 6.0, BI and EP).
Note: We have build only DEV-SolMan system as of now and we haven't done any configuration yet like either service desk or ChaRm.
The question is:
Do we need to have two seperate clients in DEV-Solman, one for all development systems and one for all quality systems? or Can we have a single client in DEV-Solman to handle all development and quality systems? What is the SAP recommented approach?
Thanks
Sanjai

Hi,
you even don't need separate Solution Manager systems to monitor DEV / QA and Prod. You could use one SolMan client to monitor and administrate all systems / clients.
Maybe it would be a good idea to create different Solution Landscapes, but this depends on your need.
Separate clients are no good option, because CHARM can only activated in on client. Also if you plan to activate charm, you need a solution that contains all systems in your transport landscape (DEV, QAnad Prod).
Kind Regards,
Holger

System Monitoring (Availability of satellite systems)

Hi!
I would like to set up System monitoring in SAP Solution Manager.
First of all the availibility of SAP systems is of great interest for me.
How can I create and add the monitoring context for the systems in tcode RZ20?
Is some suitable documentation for my question?
Thank you very much
Philip

Hi,
the relevant documentation can be found under item "Availability Monitoring with CCMSPING" at
<Monitoring Availability> [original link is broken]
Best Regards, Vital

How to view Work process status from Operating System level???

Hi,
How can I check work process status from Operating System in Unix. For example : In Windows, I can see the work process status from SAP MMC in WP Table.
How can I view from Unix?
Appreciate your feedback. Thanks.

Hi,
You can terminate. Please look into the menu given by DPMON carefully. You can kill the process using the k option.
Otherwise you can also kill the process kill -9 <PID of the process>.
Please do not terminate update and ENQ work process. This may lead to data loss. If the condition can not be control by killing some processes and again all the WPs are occupied. I recommend SAP system restart.
Restart will ensure that all necessary roll backs happen and no data loss.
With Regards,
Saurabh

Use macbook pro as a monitor to my bose system

Anyone know if you can use macbook pro as a monitor for a bose system?

I know it works well from Mac to Bose for audio and video , but I have never tried from Bose to Mac...
Have you tried calling the Bose support line?
For troubleshooting, setup and technical assistance
Within the US
Call 1-877-210-3782
Hours of operation
Mon. - Fri., 8:30 AM - 9 PM ET
Sat., 9 AM - 6 PM
I am guessing you might need to use a breakout box like the ones "El Gato" has for the mac:
http://www.elgato.com/

Set WBS status in Project System from CRM Status

Hi Gurus
I am figuring out a solution for how to influence WBS element status in Project Systems in ECC from the campaign/Marketing plan status in CRM. Has anyone done it before or is there any BADI for it.
Your help is greatly appreciated.
Regards
-MP

Your yourself answered your question.
"Can we create our own list of system status"
"Our own" status creation and maintenance feature within SAP in called "User Status".
Please follow link below to have additional information regarding system status.
link: [http://help.sap.com/saphelp_erp60/helpdata/en/a9/8a853488601e33e10000009b38f83b/frameset.htm]

New Here: Application to monitor status of Weblogic queues and bridges

hi
I'm new to weblogic and I have to build a small tool/application to monitor status of Weblogic queues and bridges.
I want to know if there is any API that I can use or any script in Java or any other language?
Thank you

for that kind of stuff maybe the easiest choice is using WLST
there are a number of scripts published on the excellent middlewaremagic.com site
if you google
site:middlewaremagic.com monitoring jms
you will find plenty of stuff

Windows Screen Saver and Monitor Status

How do I communicate to windows to find the Windows screen saver status and the monitor status?
Tim
Johnson Controls
Holland Michigan

I don't know the particular API calls you need for that, but here's the general way to access Windows innards:
Use the CALL LIBRARY function, and point it to ADVAPI32.dll.
This particular call is set up to call "GetUserNameA", returning the logged-in user's name.
If there's an API for what you need, then configure this function to go call it.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

WebService monitoring & Status in PI system

Similar Messages

Maybe you are looking for