WebService Receiver Problem. Pls advice urgent.
Hi All,
I have R/3 (RFC) -- XI -- R/3(WebService) Scenario.
Now when I test my WebService in R/3 using wsadmin command it works fine.
But If I import my webservice as wsdl file and use it in Soap Receicer Adapter and use XI I get error:
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: sapd03ci.alkhaliji.bank</SAP:AdditionalText>
Pls advice very urgent
regards
Hi RAC,
May I know where this R/3 webservice located.
In your landscape or not?
Thanks
Gujjeti
Similar Messages
-
Webservice sender and Receiver. Pls advice urgent
Hi All,
My Scenario
System A (WebService) -- XI -- System B (WebService)
Pls let me know
1. What does it mean by WebService needs WebServer?
2. For System A (WebService) -- XI
Do I require WebServer to be installed at System A or XI?
3. For XI -- System B (WebService)
Do I require WebServer to be installed at System B or XI?
Pls advice urgent.
RegardsHi Piyush,
Hi Piyush,
System A (WebService) -- XI --- System B (WebService)
I know the flow -- like both webservices will be impoted as External Definations and will me mapped.
I was asking about Webserver.
a. XI --- System B (WebService)
System B is providing wsdl.
WebServer is required at System B -- fine.
b. System A (WebService) -- XI
System A is providing WebService(wsdl) to XI
XI is NOT providing WebService to System A.
So It is a webservice(wsdl) of System A. It will be given to XI and XI will import it as wsdl.
So do we or not require require Webserver in
System A or XI?
Pls tell System A (WebService) -- XI
Webserver part.
Regards -
Webservice sender . Pls advice urgent
Hi Piyush/All,
My scenario is
System A (Webservice) -- XI -- File
System A is providing WebService(wsdl) to XI
So It is a webservice(wsdl) of System A.
XI will import that wsdl as External Defination and map to File Interface.
System A will send soap request to XI.
Can this scenario be made
1. Soap Sender Adapter --- XI --- File Receiver Adapter?
2. WebServer needs to be installed at System A?
Regards1 Soap Sender Adapter --- XI --- File Receiver Adapter?
ans:yes
2. WebServer needs to be installed at System A?
ans:yes
Check links on soap.
For SOAP see below links
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
How to use SOAP adapter:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
SAP AII - How to consume and expose webservices ? -
UDF in message mapping instead of Java Mapping. Pls advice urgent
Hi All,
My scenario
CRM --- XI -- CRM
In XI I have to open socket connection.
Pls refer link:
/people/saravanakumar.kuppusamy2/blog/2005/12/15/socket-integration-with-xi
Can Java Mapping code given in above link for socket connection can be used in Message Mapping (CRM -- CRM)UDF?
Pls advice urgent
RegardsHi Henry,
I understood your requirement.
But as per the architecture of XI/PI some message has to trigger your scenario.
In this case there is no adapter where you can directly communicate with CRM system.
Do one thing configure a dummy scenario on the sender side.
Use File adapter for simplicity. once it pools the file with some dummy data in the file it comes to Interface mapping(message mapping) of the PIPELINE steps. Now use the code as you mentioned above(within UDF) for opening socket to CRM system and implement you business logic within that program and write the response to target interface which will infact talk with CRM system.
Dont forget to do the coding in an infinite loop with some delay (if required). Other wise every time you have to put a message for File Adapter for triggering purposes.
You can also acheive the same if you use Java Mapping instead of Graphical mapping with UDF(code for Opening socket and business logic). I suggest you to use Java Mapping.
I dont know how you will comunicate with CRM system on receiver side.?
Thanks,
Gujjeti -
HTTP adapter. Pls advice urgent
Hi,
Some cleint wants to send data to PI (7.0) through HTTP.
Now should that client send through HTTP or it can also use
HTTPS.
Pls advice urgent.
RegardsHi,
All XI runtime components using the HTTP protocol support the encryption of the HTTP data stream by means of the SSL protocol, also known as HTTPS. HTTPS data streams are completely transparent to the Exchange Infrastructure
HTTPS (Hyper Text Transfer Protocol Secure) is a secure version of the Hyper Text Transfer Protocol (http). Secure means of transferring data using the https protocol in the World Wide Web where secure ecommerce transactions, such as online banking transactions and other financial transactions are involved.
Https encrypts the session with a digital certificate i.e., HTTP over SSL (Secure Sockets Layer) which can be used by Web browsers and HTTPS - capable client programs.
If the website begins with https:// instead of http://, it is a secure site. Almost 99% of the browsers can connect to web servers either using http or https. The address bar in the browser will begin with https instead of http, if a web site is secured.
HTTPS Protocol work with the combination of programs including the browser programs which takes care of the encryption/decryption routines that exist on the web hosting servers.
HTTP data is sent over TCP/IP port 80, whereas HTTPS data is sent over port 443.
HTTPS comes in two flavors, both ensuring the confidentiality of data sent over the network
1)Server authentication :
Only the HTTP server identifies itself with a certificate that is to be verified by the client.
2)Client authentication:
Additionally, the HTTP client identifies itself with a certificate that is to be verified by the server
Regards,
sangeetha -
XI to WebService . Pls advice urgent
Hi All,
Scenario:
There is some response from System A back into XI.
I need to send response from XI to System B and get response back to XI.
System B has Synchronous Web Service and has provided its WSDL to XI.
Question:
1. Do I need to Import Webservice WSDL as External Defination in XI.?
2.Do I need to use only Soap Receiver Adapter in XI as it is Synchronous Web Service and XI can get response back from that System or also I need Soap Sender Adapter ?
RegardsHi Sudeep,
I am sending this xml from runtime workbench:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_REQ_TEST xmlns:ns0="http://CRM">
<MobileNo>1</MobileNo>
<Message>2</Message>
<ActivationCode>3</ActivationCode>
<StrService>4</StrService>
<StrFrom>5</StrFrom>
<StrOptions>6</StrOptions>
</ns0:MT_REQ_TEST>
The below XML forms after mapping
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:SendMessageSoapIn xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
<strTo>1</strTo>
<strMessage>2</strMessage>
<strSubject>3</strSubject>
<strService>abc</strService>
<nOptions>0</nOptions>
</ns1:SendMessageSoapIn>
In Soap Receiver Adapter
URL -- http://172.20.80.11/MMWebService/MMWebSrv.asmx
Soap action -- #SendMessage
The error I am getting now:
<SAP:AdditionalText>soap fault: Server was unable to read request. ---> There is an error in XML document (1, 97). ---> <SendMessageSoapIn xmlns='urn:MMWebSrvService'> was not expected.</SAP:AdditionalText>
Pls advice
Regards -
Same Sender and Receiver File Name. Pls advice urgent
Hi All,
My sender file name is auto generated number so
it is dynamic in nature.
ex. "abc1.txt"
"abc2.txt"
Now In my Sender File Adapter I cannot give
File Name hard coded as my sender file name is auto generated number.
Also I want same file name received at receving end.
File Sender -- "abc1.txt"
File Receiver -- "abc1.txt"
File Sender -- "abc2.txt"
File Receiver -- "abc2.txt"
Pls advice.
RegardsHi Rider,
All your sender files have .txt extension but the name is not constant(dynamic in nature).Than in this case to pick ur file u can use the *.txt as ur sender file name.Than all the files with .txt extension in the source folder specified would be picked.
Than u can proceed in the same way given in this blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Please let me know if u need any information
Thanks,
Bhargav
Note:Award points if found useful -
HTTP Synchronous Scenario. Pls advice urgent
Hi All,
My scenario
System A -- XI --- System B
This is Synchronous HTTP scenario.
I tested in XI RWB.
a. I took Message Mapping Source xml structure and sent from RWB it worked fine.
b. I took xsd of Request Data Type and sent from RWB it shows error
"MAPPING">EXCEPTION_DURING_EXECUTE"
Now In real scenario System A will send data to XI.
So does it mean that I need to send Message Mapping Source xml structure to System A and not xsd of Request Data Type
Pls advice
RegardsHi,
Check the message status in SXMB_MONI and let me know the trace and error message.
the below message shows that there is some problem in mapping, u have not done the correct mapping between source and target.
EXCEPTION_DURING_EXECUTE"
test the message in message mapping using test tab and let me know the result.
chirag -
Webservice to XI. Pls advice urgent
Hi All,
My scenario:
Partner A(Webservice) -- XI -- Partner B(Webservice)
Partner A do not have Webservice.
So for Partner A I will make O/B Interface and make WSDL
and export that WSDL to Partner A.
Partner B has webservice
So I will take webservice of Partner B make External Defination and map to the O/B Interface of Partner A.
I will use Soap Sender and Soap Receiver Adapter.
Question:
1. Is my above approach corrcet?
2. Does Partner A and Partner B requires webservers
at their side or not?
RegardsHi Henry,
Question:
1. Is my above approach corrcet?
Yes, your approach is correct.
2. Does Partner A and Partner B requires webservers
at their side or not?
Web Services cannot be deployed without Web Servers. Web Server is mandatory. But for consuming Web Services, it is not mandatory.
So Partner B requires a Web Server
Partner A doesn't require web server to consume XI web service if it is a standalone client.
A lot of Web Servers are available like Tomcat, SAP WAS, JBOSS, Sun Web Server, Web Sphere etc.
Piyush -
Queue gets blocked in Receiver System . Pls advice urgent
Hi All,
When I send data from CRM --- XI --- DM system
Whenever data comes at DM system everytime queue gets blocked and gets status "SYSFAIL".
Pls tell me how to solve this problem.
Regards1.You can use transaction codes SMQR and SXMB_ADM for queue status resetting.
2.Use transaction codes SMQ1 and SMQ2 for deleting SYSFAIL files, and manually resending messages in the queues.(For activating queues in SMQ1 and SMQ2, you would need to first deregister them in SMQR or SXMB_ADM).
3.As a pre-requisite, the IS configuration parameter MONITOR QRFC_RESTART_ALLOWED should be set to 1.
/people/prashanth.azharuddin/blog/2006/11/24/some-errors-in-an-xi-production-environment
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically -
HTTP Sender and HTTP Receiver adapter. Pls advice urgent
Hi All,
There is one Third Party that wants to send XML data and receive XML data with XI.
Please let me know can I use HTTP for that.
How to use HTTP Sender part?
How to use HTTP Receiver Adapter?
Pls send blogs/doc for that
Thanks and Regardshi.,
Check this thread for the code for a HTTP Client,
/message/266750#266750 [original link is broken]
Also, check these blogs. They use HTTP adapters for their configuration,
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Weblog :
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
note:reward points if solution found helpfull.....
regards
chandrakanth.k -
Soap Receiver Adapter Error. Pls advice urgent
Hi All,
While using Soap Receiver Adapter for synchronous communication
*My Soap Request is:*
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:SendMessage xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
</ns1:SendMessage>
*My Soap Response from server is:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!-- Inbound Message
-->
<tns:SendMessageResponse xmlns:tns="urn:MMWebSrvService" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<return xsi:type="xsd:int">-1</return>
<strErrorDescription xsi:type="xsd:string">String reference not set to an instance of a String. Parameter name: s</strErrorDescription>
</tns:SendMessageResponse>
How to resolve the error.
RegardsHenry,
Your xml message is not xsd compliant...see if you can generate a xml message using your wsdl with random values, compare that to your imcoming msg..and thats your issue..
Hope that helps
Regards
Ravi Raman
Reward points if helpful ! -
HTTP Sender and HTTP Receiver .Pls advice urgent
Hi All,
Partner A (http) -- XI -
Partner B(http)
Now Trade Partner do not want to use HTTP client tool.
He wants to send data through URL.
Please make the full sender URL for the details below
for Sender HTTP:
XI system -- sapd0aa
Client -- 100
Port -- 8000
Sender Service -- SS
Sender Interface -- SI
Sender Namespace -- http:
abc
Qos -- EO
In Receiver HTTP Aadapter if I use RFC Destination does it has to be of Type G
RegardsHi Henry,
1. Where sender partner will send his XML if he uses the above URL?
Whatever technology , partner is using to send the data, there are some APIs available for establishing the http connection and then sending the data on this HTTP connection.
2. How the user name and password will be sent in the above URL as XI requires User Name and password.
You can embed in the URL by adding sap-user=xyz&sap-password=abc
Piyush -
Can HTTP Receiver adapter be used for Sync Comm. Pls advice urgent
Hi All,
I have some data present in XI.
I need to send the data present in XI to System A through HTTP adapter in synchronous manner means that system should send response back to XI.
Can HTTP Receiver adapter be used for Sync Commumication in my scenario.
Please send blogs/link for it
RegardsHi Henry,
>>I have some data present in XI.
In what form it is available on XI(e.g., IDOC or RFC or File etc..)?
First let us know this.
Thanks,
Gujjeti -
Alerts. Pls advice urgent
Hi All,
I have 2 BPMs scenarios in which I am getting data from different system and sending resposne back to different systems.
Pls let me know can I use Michael Blog
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
for alerts like if sender/receiver services are down, if mapping errors are there for different transformations in 2 BPMs.
Can I use the above blog only and can I avoid Alert's Container Opertaion and Control Step in BPM?
Also pls let me know how to send emails from alerts.
What setting I have to do in Alert Category.Pls send link/blog for that.
RegardsHi,
First start by creating the alerts with this BLOG
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Have a look at this SAP help file while creating the Container variables in the above Blog
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
To send email to mail box automatically when alert occurs in XI
Can you check whether the below authorization is given to that user.
For the sending of alerts via external communication methods (e-mail, sms, fax) and for inbound processing, an RFC user has to be created on the central alert server with the role SAP_BC_ALM_ALERT_USER. The authorization objects contained in this role are S_OC_SEND and S_RFC.
refer the help:
http://help.sap.com/saphelp_nw04/helpdata/en/b2/de0741375cf16fe10000000a1550b0/frameset.htm
also
check in ALRTCATDEF transaction what is the user maintained under the fixed receipent tab for that user check the email address in SU01 transaction.
Please check in transaction SCOT (you can give address of your SMTP server in order to send mails),
If it is configured then probably you need to personalized alert delivery. In alert inbox you can select personalized alert delivery and check for "Mail" option.
In SCOT you can see how many mails have beed sent via your XI system.
most of the time email problem is solved by correcting configuration in SCOT. For testing mail system click on System->short message and then send one message to yourself
Regards
Seshagiri
Maybe you are looking for
-
I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have ai
-
The app store is not working or loading on my Macbook Pro, iphone and ipad
The app store is not working or loading on my Macbook Pro, iphone and ipad Today When I tried to open the app store on my ipad I found out that's the store is not working,,, It's giving me the loading screen like for ever without any error message. S
-
Can't set a picture as background
When I choose pictures that I've taken (the ones that come with the mac work great), i just see a blue background.
-
Flex time: manual moving of some notes?
I'd like to select 3/4 notes of a guitar solo and move them up (because they are too delayed in relation to the tempo) but I can't find the way to do it. I only get a stretching effect on all previous notes. How can i do?
-
Where are all of my photos?
Only 9 of my roughly 3500 JPEG photos have moved from Photoshop to Revel. Where are my photos??