Webservices and XML

Hi, I would like to know what is the recommeded technique to pass XML documents
to/from a web services. Should I convert the XML to a String?
Thanks for your help.
Hugo

Use Document-Oriented Web Services. See "Programming WebLogic Web Services" page
5-6 "Implementing a Document-Oriented Web Service".
Agustín.
"Hugo Borda" <[email protected]> wrote:
>
Hi, I would like to know what is the recommeded technique to pass XML
documents
to/from a web services. Should I convert the XML to a String?
Thanks for your help.
Hugo

Similar Messages

General questions about using webservices and xml as opposed to an oracle driver

Dear Experts; I have a general question which I have yet to test. Is it faster to use an ODBC driver to connect and retrieve data from an Oracle database than creating a .net webservices and using an XML to get the data for your web application. THank you

At some point in the architecture stack some component will need to access the database in order to get the information from the database. That component will need to use an Oracle client driver.

Webservices and xml schema valdiation

Hi everyone,
I have a method call thru web services, where the xml document comes as a string. I need to validate the xml document using xml schema. I have searched the xerces and dom4j apis, but couldn't find anything which allows me to validate an xml document, coming as a document, or as a string (not the location to the file system).
can anyone help with any resource site, or any code , thats going to be of great help.
thanx

DOMParser parser = new DOMParser();
parser.setFeature("http://xml.org/sax/features/validation", true);
parser.setProperty(
"http://apache.org/xml/properties/schema/external-noNamespaceSchemaLocation",
"test.xsd");
hope this helps.

What's up with Webservices and BPM integration?

According to http://e-docs.bea.com/wli/docs70/design/intarch.htm, table
3-1, webservices are a key component of the Integration architecture,
which:
"Provides sample code to support WebServices integration using
WebServices technologies
such as UDDI, WebServices Description Language (WSDL), and Simple Object
Access
Protocol (SOAP). WebLogic Integration provides the ability to invoke a
WebService
from a BPM workflow, enable a BPM workflow as a WebService, and to
enable the
Application View as a WebService. For an introduction to WebLogic
WebServices,
see the WebServices and XML Tech Track in the BEA dev2dev Online at the
following
URL:
http://dev2dev.bea.com/index.jsp"
The only thing which comes close to this description is the BPM Plugin
for webservices, which is alpha code for WLI 2.1. To deploy this on 7, I
have only seen a message here describing loosely what to do.
So is this how we are expected to use webservices together with
Integration? With alpha code that requires tweaking to work with the
current version? Or am I missing something vital? The quote from the
docs suggest "sample code", however the webservices plugin is not
provided in source, so I don't see how it qualifies as sample code?
Somehow I also don't quite understand how "sample code" can be construed
as a "key component".
So what's up with webservices and Integration?
-Lasse
(only speaking for myself in news!)

Your comment about the lacking of web services in WLI is correct
and a fundamental issue I have signalled to BEA already many
months ago. I even followed the BPM course to make sure I did
not miss an important point. The BPM course did not deal with
webservices because it is not available. But the fundamental remark goes further
because webservices also have a dynamic
interface WSCI to behave within a choreography of webservices
within a business process. BPM is still mainly workflow based
and intracompany. This is not what is expected as business
processes which are collaborative and a new paradigm alternative for applications
conform BPML-WSCI or BPEL4WS-ws transaction.
I still wait from BEA a confirmation that webservices and collaborative business
processes according to (at least) one of
the above standards will be included within the next version of weblogic enterprise
platform due end of March 2002.
Kind regards,
Paul Meurisse
Email : [email protected]

Procedure for using Webserices and XML data button

I am developing a report in xcelsius and I have huge data like 10000 records in my excel sheet for one report because of which the report performance is very bad as I am increasing the max. no of rows from 512 to 10000 .Is their any way I can make those records come dynamically to the excel sheet by using XML Data Button, or Web Services etc if yes how can I use this or is their any other way to accomplish this
As of now I am using the trial versron of XCELSIUS 2008 so can I use the option of webservices and XML in the trial version if so what I need to enter in WEbservice URL for trial versions
Can any body send me the step by step process of using webservices & XML when loading the data from excel to xcelsius
if I use these options when I select the source data do I need to select the entire 10000 records , if so then again my performance will be bad , so can any one help me out please
Thanks in advance
Regards,
Sany

Dynamic datasources for Xcelsius
http://resources.businessobjects.com/support/cx/samples/learning/downloads/ttv4-xml_data_button.pdf
unable to use web services
hope this helps you
good luck
Amr

On WebServices, crossdomain.xml and debug-mode

I'm building a conncetion to a remote webservice, and they
don't have a crossdomain.xml file on their server (or it is placed
badly or something).
While developing my connection has worked fine, but when I go
outside of the debug mode (actually running the swf/html from any
other folder then the projects bin-debug) and the connection won't
work. It returns no error and just seems to keep going ignoring the
request. So I looked around for a bit and managed to turn on the
trace() log file which brought the problem to my attention:
Cannot load crossdomain.xml from server, halting request. (or
something similar)
This is fine now that I know of it, I can get the server
people to add crossdomain for me. The questions I'm asking though
is:
Why does it work in the bin-debug filder?
How can I capture the "Cannot load crossdomain..." trace? (my
guess is that its generated in the flash player, and not flex
library)

Understand the SandboxType of flash player before getinto this issue.
While inside the bin-debug, your sandbox type is LocalTrusted. This will allow access to external system,
When go go for the deployment it wont works, cos you sandbox type will be different (say Network with Local)
http://livedocs.adobe.com/flex/3/html/help.html?content=05B_Security_04.html
The above URL will expain the security concept
Nith

Consuming a webservice and attributes

I'm trying to noodle my way thru consuming a webservice and
it is not making sense when I'm trying to get attributes from a
webservice. Can someone point me in the right direction. I've
included what the xml output looks like and my cfinvoke and a
cfdump of the invoke return variable. I just don't know how to
bring back that array of course ids??
The service returns course ids
<?xml version="1.0" encoding="utf-8" ?>
- <Courses>
<Course CourseID="1167" CourseName="Human Performance
Tools - Self Checking" />
<Course CourseID="1168" CourseName="Human Perfomance
Tools - 3 Way Communication" />
<Course CourseID="1169" CourseName="Human Performance
Tools - Phonetic Alphabet" />
<Course CourseID="1170" CourseName="Human Performance
Tools - Pre-Job Briefing" />
<Course CourseID="1171" CourseName="Initial Plant Access
Training" PadsCode="PAT034" />
<Course CourseID="1172" CourseName="Initial Radiation
Worker Training" PadsCode="RWT" />
<Course CourseID="1224" CourseName="Plant Access Requal
Training" PadsCode="PAT034" />
<Course CourseID="1225" CourseName="RWT Requal Training"
PadsCode="RWQ" />
<Course CourseID="1226" CourseName="Proctoring
Responsibilities" />
<Course CourseID="1235" CourseName="Generic Confined
Space" />
<Course CourseID="1236" CourseName="Generic Fall
Protection" />
</Courses>
object of
org.tempuri.LMSWebSvc.LMS_Interface.GetCoursesResponseGetCoursesResult
Methods hashCode (returns int)
equals (returns boolean)
getSerializer (returns interface
org.apache.axis.encoding.Serializer)
getDeserializer (returns interface
org.apache.axis.encoding.Deserializer)
getTypeDesc (returns org.apache.axis.description.TypeDesc)
get_any (returns [Lorg.apache.axis.message.MessageElement;)
set_any (returns void)
getClass (returns java.lang.Class)
wait (returns void)
wait (returns void)
wait (returns void)
notify (returns void)
notifyAll (returns void)
toString (returns java.lang.String)

I found a way to get the soap request into an xml document.
It was not intuitive to me but works.
Basically rereading this post:
http://www.houseoffusion.com/cf_lists/messages.cfm/forumid:4/threadid:44797#233359
gave me more insight. The tostring function appears to allow me to
get the raw xml that CF is struggling to noodle out.

Webservice and BPM; connection AFW failed

I have created the following integration process:
1. Asynchronous receive step of a xml file;
2. Synchronous send step to invoke webservice;
3. Asynchronous send step of the response file.
In this process XI will read a xml file from a directory on the server, convert this file to a SOAP request, call the webservice and convert the SOAP response to a xml file. This file is then sent to the same server directory.
When I look in SXMB_MONI the whole process is set to ok. The response of the webservice is in the payload of the XI response message. (This is the message from my integration process to the inbound message interface.).
But the response file never reached its destination.
When I look at the file adapter monitor it reports: "Up and running - no message processing until now".
And when I look at the message monitoring, there are the following messages:
2005-07-29 11:30:55 Success The message was successfully received by the messaging system.
Profile: XI URL: http://nthvsnw4:50000/MessagingSystem/receive/AFW/XI
2005-07-29 11:30:55 Success Using connection AFW. Trying to put the message into the receive queue.
2005-07-29 11:30:55 Success Message successfully put into the queue.
2005-07-29 11:30:55 Success The message was successfully retrieved from the receive queue.
2005-07-29 11:30:55 Success The message status set to DLNG.
2005-07-29 11:30:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2005-07-29 11:30:55 Success The asynchronous message was successfully scheduled to be delivered at Fri Jul 29 11:35:55 CEST 2005.
2005-07-29 11:30:55 Success The message status set to WAIT.
2005-07-29 11:35:55 Success The message was successfully retrieved from the receive queue.
2005-07-29 11:35:55 Success The message status set to DLNG.
2005-07-29 11:35:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2005-07-29 11:35:55 Success The asynchronous message was successfully scheduled to be delivered at Fri Jul 29 11:40:55 CEST 2005.
2005-07-29 11:35:55 Success The message status set to WAIT.
2005-07-29 11:40:55 Success The message was successfully retrieved from the receive queue.
2005-07-29 11:40:55 Success The message status set to DLNG.
2005-07-29 11:40:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2005-07-29 11:40:55 Success The asynchronous message was successfully scheduled to be delivered at Fri Jul 29 11:45:55 CEST 2005.
2005-07-29 11:40:55 Success The message status set to WAIT.
2005-07-29 11:45:55 Success The message was successfully retrieved from the receive queue.
2005-07-29 11:45:55 Success The message status set to DLNG.
2005-07-29 11:45:55 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2005-07-29 11:45:55 Error The message status set to NDLV.
I looked at several postings with the subject "Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException", but I could not find any which seems to meet my problem.
I would highly appreciate any help on this.

Sorry for my late response, but I did not look at this after it was solved and I did not receive any mail. So please let me know if you still need some support.
I could send you a document with some screen shots. If so send me an email ([email protected])

Query SAP BW via XMLA Webservice and save response to HD

Hi,
I´m currently working for an QM Project to create an Overview-page with figures from various BW-Querys. Unfortunatly the the BW-Performance isn´t fast enough to execute a lot of Querys in realtime, so I can´t use the Web App Designer.
To improve performance I want to execute those querys once a day and save the result sets on hard disk. To get the data out of the BW I want to use the XMLA-Webservice which is already running.
Is there a simple way or application to send my XMLA to the webservice and save the response on hard disk?

You can use XMLA web service or the queryview web service to get the data in XML format. The queryview XML service is only available from BW 3.5, see attached documentation.
http://help.sap.com/saphelp_nw04/helpdata/en/d8/3bfc3f8fc2c542e10000000a1550b0/content.htm
Ther is also an How to document available for XMLA under the BW 3.0B section.
If you are looking at a report with no navigation you can use the pre-calculation of the web reports with reporting agent which will create a pre-calculated HTML output on the BW server. Everytime you access the web report the pre-calculated HTML output will be displayed and the performance is great as the data is not accessed at runtime.
http://help.sap.com/saphelp_nw04/helpdata/en/9e/9f653ade969f4de10000000a114084/content.htm
Thanks.

XI, WebService Call, XML incoming request Umlauts go into "#"

Hi
we have following problem. We have WebService defined in XI.
Request XML file comes from external system to call WebService, and in one of the fields there is German Umlaut character. But in XI Monitoring this Umlaut is changed into "#" character.
How to achieve that Umltauts go as umlauts to message mapping?
Thank you

Hi Walczak,
Try using a different encoding format for the XML message, which support the German Characters.
Regards,
Ravi Kanth Talagana

Weblogic webservices and JSP

Hi Folks,
I have been stuck with this issue for quite sometime now. I have developed a simple webservice using a java class. It looks something like this..
public class ReceiveMessageClass{
 public void receiveMessage(String msg){
 logIt(msg);
 //Store 'msg' in a memory variable so that the JSP can ping it every 10 sec and read it..
}Now, I need a webpage to look at all the messages I recieve at this webservice. Sounds pretty easy? I have done this with Axis. I can create a WAR and my webservice and my JSP can co-exist and share a variable in memory. But with weblogic, a EAR is created and I am not sure how to get my JSP into the EAR. I am not sure how I can store this 'msg' into memory(some static vbl) and then have my JSP read it and display it.
Any suggestions?

I do not see any weblogic classes in the stack trace. So could this
be something to do with tomcat?
If you are just using the client side of the web services stack, you
only need the Client.jar and webserviceclient.jar file in your war.
Regards,
-manoj.
http://manojc.com
"Stephen Zeng" <[email protected]> wrote in message
news:3ef1d72c$[email protected]..
>
I have packed Client.jar, weblogic.jar, webservices.jar and jsp as aseperated
war to call web sevice and run sucessfully in WLS7.0. But when I ran inTomcat
4.0.1, I got the following error. I try set javax.xml.rpc.ServiceFactoryas context
param in web.xml, but no use. 
java.lang.ClassCastException 
atjavax.xml.parsers.DocumentBuilderFactory.newInstance(DocumentBuilderFactory.
java:93) 
atorg.apache.jasper.parser.ParserUtils.parseXMLDocument(ParserUtils.java:183) 
atorg.apache.jasper.compiler.TldLocationsCache.processWebDotXml(TldLocationsCa
che.java:165) 
atorg.apache.jasper.compiler.TldLocationsCache.(TldLocationsCache.java:138)
atorg.apache.jasper.EmbededServletOptions.(EmbededServletOptions.java:324)
at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:266)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:852)
atorg.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:615)
atorg.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.ja
va:214)
atorg.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:5
66)
atorg.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
Stephen

Weblogic-webservices-policy.xml

hi,
iam getting the following error in weblogic-webservices-policy.xml
Referenced file (weblogic-webservices-policy.xml) contains errors (http://www.bea.com/ns/weblogic/webservice-policy-ref/1.0/webservice-policy-ref.xsd).
weblogic-webservices-policy.xml containts the following lines of code:
<?xml version='1.0' encoding='UTF-8'?>
<webservice-policy-ref xmlns="http://www.bea.com/ns/weblogic/webservice-policy-ref" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/webservice-policy-ref http://www.bea.com/ns/weblogic/webservice-policy-ref/1.0/webservice-policy-ref.xsd"></webservice-policy-ref>
can anybody suggest how to fix this error?
thanks
john

Hi!
I was looking for some information regarding the weblogic-webservices-policy.xml file and founf your post. Did you success to solve the problem with it?
Greatly appreciate any inputs
Sincerely
J.

Call a webservice and get back a value within an ESB...

Hi!
I'd like to call a webservice and get back a value from it within an ESB. But I don't know how.
I think, I must create a routing service, then a SOAP service, but how can I get back the value from the webservice, which I called in the SOAP service?
Or it is not possible to realize this within an ESB?
Thank You very much!
Viktor

When you take a look at the Soa Orderbooking example you can see how it works. You create a webservice that accepts certain parameters and these are bundled into an object. This object, in case of the Soa Orderbooking example a 'PurchaseOrder', is described using an Xml Schema. The XML Schema is used to create the ESB with. Using this xsd the ESB knows which object it can expect and this object can be used inside your ESB or inside a bpel process.

EncodingError when Webservice and SoapHeader

Hi All,
does anybody know a solution for this:
Call a webservice works fine without identification. But to
send Credentials I add a SoapHeader. Then I get an error #1009 The
access to properties or methods of a null-objectreference is not
allowed.
And when I debug this it all stops in a operation.as at line
764. Here are the lines
764 soap = encoder.encodeRequest(pc.args, pc.headers);
catch(fault:Fault)
dispatchRpcEvent(FaultEvent.createEvent(fault));
return;
catch(error:Error)
var errorMsg:String = error.message ? error.message : "";
var fault2:Fault = new Fault("EncodingError", errorMsg);
var faultEvent:FaultEvent = FaultEvent.createEvent(fault2);
dispatchRpcEvent(faultEvent);
return;
And here is the code where I call the webservice:
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="vertical" height="186" width="316">
<mx:WebService
id="userRequest"
wsdl="
http://mitbb01.make-it.local/mywebservice.nsf/wsecho?WSDL"
load="headers();">
<mx:operation name="ECHO" resultFormat="object"
fault="mx.controls.Alert.show(event.fault.faultString)"
result="showResult(event)" />
</mx:WebService>
<mx:Script>
<![CDATA[
// wsdl="
http://mitbb01.make-it.local/wsecho.WSDL"
load="headers();">
// wsdl="
http://mitbb01.make-it.local/mywebservice.nsf/wsecho?WSDL"
load="headers();">
// load="headers();"
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.rpc.soap.*;
import mx.rpc.soap.SOAPHeader;
private var header1:SOAPHeader;
public function headers():void {
// Create QName and SOAPHeader objects.
var q1:QName=new QName("
http://soapinterop.org/xsd",
"Header1");
header1=new SOAPHeader(q1, {userName:"admin
makeit",Password:"kennwort"});
// Add the header1 SOAP Header to all web service requests.
userRequest.addHeader(header1);
private function showResult(e:ResultEvent):void
ti_Response.text = userRequest.ECHO.lastResult;
private function send_data(linie:String):void
userRequest.ECHO(linie);
]]>
</mx:Script>
<mx:TextInput id="ti_Request" text="lalala"/>
<mx:Button label="Send"
click="send_data(ti_Request.text)" />
<mx:TextInput id="ti_Response"/>
</mx:WindowedApplication>
What goes wrong. Is there a workaround. Please help. Thanx
for any help in advance.
Regards
Andreas

Sorry for my late response, but I did not look at this after it was solved and I did not receive any mail. So please let me know if you still need some support.
I could send you a document with some screen shots. If so send me an email ([email protected])

Oracle Object Types and XML

Hi All
I have oracle object types created.
<code>
CREATE OR REPLACE
TYPE CONFIRM_APP_CONFIRM_ENQUIRY_AT AS OBJECT
ENQATTRIBTYPECODE VARCHAR2(1000),
ENQATTRIBVALUECODE VARCHAR2(1000),
ENQATTRIBSTRINGVALUE VARCHAR2(1000),
ENQATTRIBNUMVALUE NUMBER,
ENQATTRIBDATEVALUE DATE
</code>
I m using this type for couple of columns in a table
and then i try to use this procedure which generates XML
<code>
BEGIN
MY_SQL :=
DBMS_XMLQUERY.NEWCONTEXT
( 'Select Nvl(Enquiry_Number,9999) "EnquiryNumber",
External_System_Reference "ExternalSystemReference",
External_System_Number "ExternalSystemNumber",
Service_Code "ServiceCode",
Subject_Code "SubjectCode",
Enquiry_Description "EnquiryDescription",
Enquiry_Location "EnquiryLocation",
Enquiry_Status_Code "EnquiryStatusCode",
Assigned_Office_Code "AssignedOfficerCode",
Logged_Time "LoggedTime",
EnquiryX "EnquiryX",
EnquiryY "EnquiryY",
Site_Code "SiteCode",
Central_Asset_Id "CentralAssetId",
Contact_Name "ContactName",
Contact_Phone "ContactPhone",
Contact_Fax "ContactFax",
Contact_Email "ContactEmail",
Enquiry_Reference "EnquiryReference",
Enquiry_Class_Code "EnquiryClassCode",
Notice_From_Org_Code "NoticeFromOrgCode",
Works_Reference "WorksReference",
Job_Number "JobNumber",
Address_Reference "AddressReference",
enquiry_attribute1 "EnquiryAttribute",
enquiry_attribute2 "EnquiryAttribute",
enquiry_attribute3 "EnquiryAttribute",
enquiry_attribute4 "EnquiryAttribute",
enquiry_attribute5 "EnquiryAttribute",
enquiry_attribute6 "EnquiryAttribute",
enquiry_attribute7 "EnquiryAttribute",
enquiry_attribute8 "EnquiryAttribute",
enquiry_attribute9 "EnquiryAttribute",
enquiry_attribute10 "EnquiryAttribute",
enquiry_attribute11 "EnquiryAttribute",
enquiry_attribute12 "EnquiryAttribute",
enquiry_attribute13 "EnquiryAttribute",
enquiry_attribute14 "EnquiryAttribute",
enquiry_attribute15 "EnquiryAttribute",
enquiry_attribute16 "EnquiryAttribute",
enquiry_attribute17 "EnquiryAttribute",
enquiry_attribute18 "EnquiryAttribute",
enquiry_attribute19 "EnquiryAttribute",
enquiry_attribute20 "EnquiryAttribute",
enquiry_customer "EnquiryCustomer",
enquiry_document "DocumentLink"
FROM XXHCC_HOLDING_CONFIRM WHERE
EXTERNAL_SYSTEM_REFERENCE ='
|| EXTERNAL_SYSTEM_REFERENCE
|| '
AND message_status = ''FAIL'''
DBMS_XMLQUERY.SETROWSETTAG (MY_SQL, 'Operation');
DBMS_XMLQUERY.SETROWTAG (MY_SQL, 'NewEnquiry');
L_XML := DBMS_XMLQUERY.GETXML (MY_SQL);
DBMS_XMLQUERY.CLOSECONTEXT (MY_SQL);
</code>
when i get the xml as output, i get this..
<code>
<Operation>
<NewEnquiry num="1">
<EnquiryNumber>9999</EnquiryNumber>
<ExternalSystemReference>4343017</ExternalSystemReference>
<ExternalSystemNumber>1</ExternalSystemNumber>
<ServiceCode>HWAY</ServiceCode>
<SubjectCode>MAIN</SubjectCode>
<EnquiryDescription>TAI-Highway Maintenance</EnquiryDescription>
<EnquiryLocation>O/S Cheese Pub</EnquiryLocation>
<LoggedTime>2008-04-09T08:33:36</LoggedTime>
<SiteCode>19101890</SiteCode>
<ContactName>MRS xyz</ContactName>
<ContactPhone>3434343</ContactPhone>
<EnquiryReference>CRMHUB</EnquiryReference>
<NoticeFromOrgCode>ABC</NoticeFromOrgCode>
<WorksReference>4343017</WorksReference>
<EnquiryAttribute>
<ENQATTRIBTYPECODE>CSPL</ENQATTRIBTYPECODE> <ENQATTRIBSTRINGVALUE>n.a</ENQATTRIBSTRINGVALUE>
</EnquiryAttribute>
<EnquiryAttribute>
<ENQATTRIBTYPECODE>CSAI</ENQATTRIBTYPECODE>
<ENQATTRIBSTRINGVALUE>Cracked Path-Loose Flagstone</ENQATTRIBSTRINGVALUE>
</EnquiryAttribute>
<EnquiryAttribute> <ENQATTRIBTYPECODE>CSDL</ENQATTRIBTYPECODE> <ENQATTRIBSTRINGVALUE>No</ENQATTRIBSTRINGVALUE>
</EnquiryAttribute>
<EnquiryAttribute>
<ENQATTRIBTYPECODE>CSIM</ENQATTRIBTYPECODE>
</EnquiryAttribute>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<EnquiryAttribute/>
<ENQUIRY_CUSTOMER>
<CUSTOMER_ALT_PHONE>00</CUSTOMER_ALT_PHONE>
<CUSTOMER_PRIMARY_ADDRESS>,,0, ABC Street</CUSTOMER_PRIMARY_ADDRESS>
<CUSTOMER_TOWN_NAME>UK</CUSTOMER_TOWN_NAME>
<CUSTOMER_COUNTY_NAME>UK</CUSTOMER_COUNTY_NAME>
<CUSTOMER_POST_CODE>AB1 3QT</CUSTOMER_POST_CODE>
</ENQUIRY_CUSTOMER>
</NewEnquiry>
</Operation>
</code>
My question is i m transferring this XML to a third party webservice and it does inserting into a third party application.
The problem is if you look under EnquiryAttribute tag ENQATTRIBSTRINGVALUE and ENQATTRIBTYPECODE i need this to be in lowercase.
As the xml is getting automatically generated how do i achieve this. I feel them in the uppercase is causing problems at the other end.
Any help appreciated
Srini
Message was edited by:
sikhasrinivas

Use "..." delimiters in the CREATE TYPE (and in all your code that references the type).

Webservices and XML

Similar Messages

Maybe you are looking for