Webservices with php any suggestions?

Hi I have a fair bit set up but wondering if anybody has set
up using webservices with a php proxy or NUSOAP?
It would be great to hear any ideas.
Thanks

By default the camera will use all 9 AF points, but you can tell it use a specific single point.
If the camera is in the default (all 9 AF points active) mode, then it can't focus on all subjects at different distances simultaneously -- it has to choose a subject. The camera is programmed to always choose the subject which can be focused at the NEAREST focusing distance.
Much of the time, this would be exactly what the typical photographer wants. But if you have anything nearer to the camera than your intended subject then it will tend to focus on that distracting element rather than your intended subject.
The fix is to use single AF-point mode as this puts you in control of focus.
Tim Campbell
5D II, 5D III, 60Da

Similar Messages

I have iMac and need a good photo editing program to use. Reviews say aperture runs really slow with Lion, any suggestions?

I need a program where I can remove objects and touch up dead grass, etc.

Reviews say Aperture runs really slow with Lion, any suggestions?
To add on to Corky02 answer:
The recent Aperture release AP 3.3.x is very efficient, both on Lion and Mountain Lion. But you need a decent hardware to support it. The older Macs will have problems with the storage and CPU requirements. For good performance on large raw images plenty of RAM is important, at least 4GB, but 8GB would be much better, and your library should be on a fast disk, preferably on an internal drive. And don't let the system drive get too full.
Many reports about Aperture being slow are due to putting the Aperture library onto slow disks or acessing the original image files over the network, insufficient RAM, or corrupted or ill-designedAperture databases.
Aperture excels at all kinds of image processing that can be considered image developement - raw processing and color/lighting adjustments, but does not do compositing. If you are shooting raw and want professional image developement I'd recommend to do this in Aperture and not in iPhoto - you will have much more control over this in Aperture (after a steep learning curve). You can also repair and retouch the image to correct minor blamishes. For graphics compositing and inpainting you can set up an external editor and send your images from Aperture to this external editor - any of the editors Corky recommended would be o.k. for this.
To see, if you will want the advanced image processing in Aperture or the easy to use, more basic options in iPhoro will be sufficient to you have a look at the Aperture User manual, or the tutorial on the support page: Aperture Support
But Aperture is a professional apllication, not "plug and play". You should only consider it, if you are willing to spend some time on learning to use it properly and are willing to work your way through the manual.
Regards
Léonie

Just got a ipod 7th generation and having some difficulty copying tunes from 5 generation to new ipod; cant seem to sync old with new. any suggestions?

just got a ipod 7th generation and having some difficulty copying tunes from 5 generation to new ipod; cant seem to sync old with new. any suggestions?

Plug your iPod in and when it appears in iTunes, click on it from under Devices in the left hand pane. This brings you to the Summary tab. Locate and click on the Music tab. What configurations do you have made from under this tab? Is your iPod configured to sync those playlists?
B-rock

Two month old iPohone 5s and the screen is changing colors with jitters, any suggestions?

Recently I've experienced the screen of my phone going crazy. Kind of like when a TV gets bad connection and different colors happen. It gets worse with the camera. Any suggestions?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problems with autofocus, any suggestions?

Recently got back from a Tanzania safari. Bought a t3i to replae my old P&S. I'll be honest, I didn't take the time to learn how to use it properly, so I left it on auto mode 90% of the time. Anyways, when I got home and downloaded all the photos, I noticed that about 50% of the photos had problem with focusing on the wrong thing (e.g. If I try to take a picture of an animal, it would focus on the small tree branch in front of the animal, so the animal would be blurred). I was using autofocus on a tamron 18-270 lens. Any suggestions on how to correct this in the future, or do I need to use manual focus? (I tried this, but even then my pictures ended up out of focus). Thanks!

By default the camera will use all 9 AF points, but you can tell it use a specific single point.
If the camera is in the default (all 9 AF points active) mode, then it can't focus on all subjects at different distances simultaneously -- it has to choose a subject. The camera is programmed to always choose the subject which can be focused at the NEAREST focusing distance.
Much of the time, this would be exactly what the typical photographer wants. But if you have anything nearer to the camera than your intended subject then it will tend to focus on that distracting element rather than your intended subject.
The fix is to use single AF-point mode as this puts you in control of focus.
Tim Campbell
5D II, 5D III, 60Da

My iphone syncs calendar with MS exchange, Unable to sync with icloud, any suggestions?

I have my calendar through work on exchange, which syncs well with my iphone. I can't see it on icloud. I changed an event on my phone from exchange to icloud and it deletes my exchange event put's it on icloud (stays on phone obviously). any suggestions on how to get both to work?

Here are some docs from MS:
http://office.microsoft.com/en-us/outlook-help/synchronize-outlook-and-apple-iph one-or-ipod-touch-calendars-HA010266829.aspx
http://office.microsoft.com/en-us/outlook-help/synchronize-outlook-and-apple-iph one-or-ipod-touch-contacts-HA010266802.aspx

Unable to charge my ipad3 with itunes.Any suggestions

Unable to charge my ipad3 with itunes.Any suggestions

Presuming you mean charge your iPad via USB it doesn't work that way. Most USB ports don't put out enough power to fully charge an iPad. In fact, the USB puts out about half the iPad's minimum requirements.
The best way to charge it is with the supplied charger plugged into the wall.

Just finished the update re/iOS5 on my ipad, now message comes up "enter PUK" I have never used this iPad with 3G Any suggestions? I don't think I ever set up a SIM PIN

Help?

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

HT2488 Find/Replace text in document with automator: any suggestions?

I'm looking to replace a number of unique html tags for a number of documents: is there any way to do this without going through the documents one-by-one, tag-by-tag? I would imagine I might be able to do something with automator, but I'm open to any other suggestions. I have some knowledge of html, but that's about it.

So I take it this is something you do regularly, not something that needs to get done once? if it were a oneshot operation it would be simpler to use TextWrangler.
For repeated use, the simplest approach is to run through the files and apply text item delimiters to each tag:
set indesignTags to {"idtag1", "idtag2", "idtag3"}
set htmlEquivs to {"htmltag1", "htmltag2", "htmltag3"}
set theFiles to choose file with prompt "Choose indesign files" with multiple selections allowed
repeat with aFile in theFiles
-- get file text
 set fileText to read aFile
-- swap tags
 repeat with i from 1 to count of indesignTags
-- swap lead tags
 set fileTextBits to tid({input:fileText, delim:"<" & item i of indesignTags})
 set fileText to tid({input:fileTextBits, delim:"<" & item i of htmlEquivs})
-- swap trailing tags
 set fileTextBits to tid({input:fileText, delim:"</" & item i of indesignTags})
 set fileText to tid({input:fileTextBits, delim:"</" & item i of htmlEquivs})
 end repeat
-- make new file path with html extension
 set oldFilePath to POSIX path of aFile
 set filePathBits to tid({input:oldFilePath, delim:"."})
 set last item of fileNameBits to "html"
 set newFilePath to tid({input:filePathBits, delim:"."})
-- save at new file path
 set fp to open for access newFilePath with write permission
write fileText to fp
close access fp
end repeat
on tid({input:input, delim:delim})
-- handler for text items
 set {oldTID, my text item delimiters} to {my text item delimiters, delim}
 if class of input is list then
 set output to input as text
 else
 set output to text items of input
 end if
 set my text item delimiters to oldTID
 return output
end tid
This will work if the indesign tags are unique and there is no complex syntax. It might fail if tags have overlapping names (e.g. "<bl>" and "<blue>") or if there's any irregular notation. If you need more sophisticated handling you'll have to use regular expressions. In that case, download and install the Satimage osax from this page, and use the following (similar) code:
set indesignTags to {"idtag1", "idtag2", "idtag3"}
set htmlEquivs to {"htmltag1", "htmltag2", "htmltag3"}
-- set up regular expressions change lists
set findList to {}
set changeList to {}
repeat with i from 1 to count of indesignTags
 set end of findList to "(</?)" & item i of indesignTags & "(?![[:alnum:]])"
 set end of changeList to "\\1" & item i of htmlEquivs
end repeat
set theFiles to choose file with prompt "Choose indesign files" with multiple selections allowed
repeat with aFile in theFiles
-- get file text
 set fileText to read aFile
-- swap tags - needs Satimage osax
 set fileText to change findList into changeList in fileText with regexp
-- make new file path with html extension - needs Satimage osax
 set oldFilePath to POSIX path of aFile
 set newFilePath to change "\\.[^.]+$" into ".html" in oldFilePath with regexp
-- save at new file path
 set fp to open for access newFilePath with write permission
write fileText to fp
close access fp
end repeat
Message was edited by: twtwtw - I made an error in the second regular expression. should be "\\.[^.]+$", not "\\..*$". fixed in text.

Error with Ipod - any suggestions?

Hi
I've had my Ipod for a good 3 to 4 years now and it has been great up until 3 days ago when it decided to display an error message with a picture of an unhappy Ipod, also it is making a repetitive noise that keeps going until it turns itself off. I have looked at the online support and I haven't really been able to reach any conclusions or fix it - - If anybody has any hints or tips about what is wrong with it or how I can fix it then I would appreciate this greatly. It may just be that it's reached the end of it's life and it's time to invest in a new one but hopefully not so if anyone can help that would be great.
Thanks in advance,
Alex

Hi...
Click here: iPod displays a sad iPod icon
Carolyn

(When I go into a site that I use for my work. There are toggle buttons on the top that have a drop down menu. it worked with 3.6 but not with 4 any suggestions)

Like said the buttons work on the home page, but once you go in side the site the buttons dont work

Seems to be working fine here. 
I checked some of the pages. 
Can you post a link where it doesn't work for you?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My iphone 4s doesn't have music coming from the speaker and I cannot adjust the volume, however my phone rings and works with headphones. any suggestions?

I got my phone recently and for some reason the speakers arent working. I can only hear my music and ajust the volume if the headphones are plugged in but it doesnt solve anything if they arent plugged in. Please help me.

Hello there, Ashleyyyy.
The following Knowledge Base article should get you going on resolving your issue:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Flash player won't load,ergo can't watch videos with Firefox.Any suggestions?

After upgrading to Firefox 8 I keep getting plugin manage messages and video's won't play.

same for me

How to use crystal report with php

Hello every body
can any body know how to use crystal report with php any helping material, code or tutorial for my problem ill be very thankful for helping me
farooq

Hello sir
i am sudeep and i need to deploy crstal reports in php
i want to integrate it in sugar crm (open source project(
can u plz tell me how to do it
i have written this code
<?php
//echo phpinfo();exit;
$ObjectFactory= New COM("CrystalReports11.ObjectFactory.1");
$crapp = $ObjectFactory->CreateObject("CrystalDesignRunTime.Application");
//$crapp = new COM("CrystalRuntime.Application.10");
$reportToRun="C:\Report4.rpt";
$creport = $crapp->OpenReport($reportToRun, 1);
//reportToRun=full path to *.rpt file
$creport->Database->Tables->
Item(1)->ConnectionProperties['User ID'] = $user;
$creport->Database->Tables->
Item(1)->ConnectionProperties['Password'] = $pass;
//fomatType = integer 22=xls, 31=pdf etc
$creport->ExportOptions->FormatType = $formatType;
//type 1 is to output to a file I think 2 is email
$creport->ExportOptions->DestinationType = 1;
//location = full path to report output file
$creport->ExportOptions->DiskFileName = $location;
$creport->DiscardSavedData();
$creport->Export(False);
?>
thanks in advance

Webservice with axis given a wsdl

Hi all,
I am a newbie to webservices, I have been given a wsdl from another company and I have been asked to develop a webservice with it. I would like to know the steps which I would be requiring to take inorder to build a webservice with axis. any help would be appreciated.
I want to know how should i proceed by looking at the wsdl. The wsdl given is quite huge and big. any starting point would be helpful.

hey neeeded a help.. you had followed jacobs instructions.. in that it says and i quote !
1. delete the plugin folder, restart Eclipse, update the lib in the plugin folder
Copy 2 files: "backport-util-concurrent-3.1.jar" and "geronimo-stax-api_1.0_spec-1.0.1.jar" from <Axis2Home_Location>/lib folder to the <Eclipse_Location>\plugins\Axis2_Codegen_Wizard_1.3.0\lib folder.
2. Edit the plugins.xml file in the <Eclipse_Location>\plugins\Axis2_Codegen_Wizard_1.3.0 folder as follows:
<runtime>
<library name="lib/geronimo-stax-api_1.0_spec-1.0.1.jar">
<export name="*"/>
</library>
<library name="lib/backport-util-concurrent-3.1.jar">
<export name="*"/>
</library>
</runtime>
then copy the plugin folder to eclipse plugin
restarted Eclipse and it worked.
fix worked fine for me with Eclipse WTP (Europa) and jdk1.5.0_07
Now my question is if i delete the plugin folder, and try to restart Eclipse, Eclipse does not start, it says missiing jars ..
I am sorry to bother you with so much questions ..
thanks 1

Webservices with php any suggestions?

Similar Messages

Maybe you are looking for