Website appears on server, but can't access from other computers

I migrated from Server 10.5 to Snow Leopard Server. Used the migration tool to bring everything over from the previous box.
I can access the website via browser from the server, but can't access it from any other computers. I'm a decidedly non-geek type, so too many settings are gibberish to me. However, I at least ran the previous server for many years without problems.
Any clues as to what I'm missing?

What error message(s) are you getting from the remote web browser clients?
Exactly what string are you typing into the address bar of the web browser?
Are the remote clients on the same LAN as the web server, or on a remote network?
If running, is the firewall open for port 80 or port 443 for the web server?
Knowing a little more "gibberish" helps when you're running a server, too.

Similar Messages

  • Tables stored in memory but may be accessed from other sessions

    Dear Oracle experts,
    it may be a stupid question but I'm searching for the best possibility to create a kind of temporary table which may be accessed from other sessions.
    Could you provide some hints/ catchwords to speed up my recherches.
    Thank you very much,
    Daniel

    danielwetzler wrote:
    danielwetzler wrote:
    I fear that the caching is not suitable for my case because of the reasons decribed in my other postings...First of all I don't think that you need to worry about the effectiveness of the caching in your particular case. In addition Oracle is very clever at when to actually write the dirty blocks from the buffer cache to the disks, so if your amount of data written to the result table is fairly small and no other activity is going on your system it won't get written to disk immediately anyway but stay in memory until any of the conditions are met that trigger the database writer to flush the blocks to disk.
    But there are options you could consider if you want to avoid as much of the overhead as possible and to write the results of your calculation to the result table as fast as possible.
    You could use direct-path inserts (INSERT /*+ APPEND */) and set the result table to "NOLOGGING". This way no undo and minimum redo is generated.
    Note however that there are certain caveats and restrictions to consider when using such an approach, e.g. your result table won't be recoverable (which you say is OK), only one direct-path insert is allowed simultaneously (it blocks the table exclusively, no other DML possible until you commit/rollback the transaction), and the direct-path insert has some restrictions. If any of these apply that prevent the direct-path operation then it silently falls back to "conventional" insert mode which generates undo and redo. One of the more annoying restrictions is that you can't read from a table that has been written to in direct-path mode within the same transaction, you first have to commit the transaction, otherwise you get "ORA-12838: cannot read/modify an object after modifying it in parallel". This means by simply adding the APPEND hint you might break existing logic.
    Finally the direct-path insert never re-uses free space in blocks below the current high-water mark, which means if you perform a direct-path insert and afterwards delete rows from the table and repeat again a direct-path insert operation your segment will grow and the empty space in the already used blocks won't get re-used. Best way would be to truncate the table rather than deleting rows from it.
    There are workarounds available to overcome some of these direct-path insert limitations (exclusive lock, truncate instead of delete etc.), like using a partitioned table (if you have a suitable edition/license), because direct-path inserts can be restricted to partitions. In this case you can do simultaneous direct-path inserts if you use different partitions, but you need then some kind of logic that determines which partition to use.
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • Can not open my yahoo mail. Can't find on server but can open in all other browsers

    Yahoo mail will not open in Firefox new 4.0 or older versions.
    However, I can open in Safari and IE7.
    Have talked to several folks that are having the same problem and most are just switching to other browsers and the problem goes away. I would prefer to solve the problem rather than just giving up and switching permanently to another browser. Different computers and I have the same problem. Copying the mail address from IE7 to firefox and it still can not find the mail account. Does find other web addresses just fine. It is something to do with yahoo mail.

    if that is giving you a problem you might wanna look into
    the app called yahoo one connect
    its free and it can help with any problem you are
    getting with yahoo mail
    or at least till apple looks into your problem

  • Job server giving error when accessing from other servers and clients

    I am facing one issue at customer site with DS 4.0.
    -     Job Servers are installed on two machines M1 and M2. JS1 on M1 and JS2 on M2.
    -     Both the job servers are in server group
    -     Sitting on machine M1, I am able to run jobs selecting JS1 and JS2 individually
    -     On Machine M2, JS2 is working fine however while running jobs on JS1 it says Job Server is not working
    o     In Designer screen, I can see the job server icon at the bottom without cross mark, which means it is working. However, when I move the cursor on this icon, following text is displayed on the tray
    Job Server: (servername:3500) - notification server error (BODI-1241023)
    I have checked the firewall on both the servers, and port 3500 is open.
    Any idea what the problem can be?

    You may also search for Access help at http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

  • Search is working fine on one server but not giving results from other servers. moss 2007?

    hi,
    we have multi server or wfe architecture. configured search service on one server 01, central admin is 02, and query as 03, now crawled content with hostname:port of 01. everything is fine.
    but now when we trying to search results its giving results on server 01 which is index and query role. but didnt return any results in other servers.
    help is really appreciated.
    Thanks,
    SJ

    I thought you are posting question in wrong forum. Please move the question to
    https://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointsearch. There some one will help
    Ravin Singh D

  • I can not see photos when I connect my Iphone 4s to PC but can see photos from other iphone 4s. Both phones uses same OS version. Any setting is difference?

    I can see folder as Apple Iphone & also see how much harddisk is full but no acess photos. When clisck to download photos optin error message pops up "NO new photos"

    are you using the same Apple ID on both devices? If so, that is the problem. Its much like trying to call your own phone number with a regular phone, you'll be forwarded straight to voicemail.
    let me know if this helps.

  • Updated MBP from snow leopard to mavericks and now can't log into website I subscribe too.  Can log in on other computers, just not using Mavericks.  Tried safari, firefox and chrome.  Tried clearing cache/cookies/history etc.  Any suggestions?

    Have utilised the website's Help services with no answer.  They report it's fully supported by Mac system.  Have tried turning firewall off.  Nothing.  Assuming it's a privacy/security setting given no success in 3 browsers???  Help?

    Try making a test user account in System Preferences > Users & Groups.
    Isolating an issue by using another user account
    Then log out of your usual user account and try the test user account, and see if the website  will let you in.
    I suspect that the problem is an internet plugin that is not compatible with Mavericks. The old internet plugin will not be in the test user account.
    If the site lets you in with the test user account, then it's a process of trial and error to figure out which plugin is the culprit.
    The internet plugins are found in a few places.
    Most are in /Library/Internet Plugins
    Some may be in ~/Library/Internet Plugins
    ~/Library is hidden by default.

  • I cannot access my emails through Firefox after having system changed from Mac to PC. I have reset the password but no luck. I get 'reason=failure'. I cannot access from other computers either.

    I cannot access my emails from any work computer despite resetting password (original password unknown as before my time and had been 'remembered' in system so was always there).
    == This happened ==
    Every time Firefox opened
    == Logging on after work done to change systems. IT person now gone.

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • Airport express - have signal, can't connect from other computers

    i'm not the most computer savvy, so i apologize if i don't know all the terminology. i'll try to explain my problem as best i can...
    i have airport express. i'm using it as a base station in my father's office and then attempting to connect wirelessly with my laptop and my brother's laptop. i know the internet itself works because my mother's computer, which connects via ethernet, has internet access. my dad's computer, which is, i guess, the airport administrator station, has internet. his wireless signal is, obviously, fine.
    for some reason, though, i cannot connect to the internet on either my laptop or my brother's. both computers have strong wireless signals and SAY they are connected, but when i open safari, i can't connect. i've tried EVERYTHING -- reread the apple support stuff about 100 times. i thought maybe there was a PPPoeP issue, but that doesn't seem to be it... i've done a hard reset of the airport express and that doesn't fix it... i've checked all the network configurations and they seem to be fine... the IP addresses on both laptops begin with "10.0.1."something, which seems to be right... i'm stumped.
    my best guess is that there must be settings on my dad's computer that don't recognize the laptops trying to connect.
    if anybody has any advice, it would be greatly appreciated. if you have any particular places on the apple support page that you think i should look at, just post the link. thanks in advance.
    p.s. my dad's computer runs 10.4.5, my brother's laptop same, and my laptop 10.2.6, if that makes any difference.

    one more thing... my laptop definitely has the capacity to connect wirelessly, as i use it at work with no problem... it just automatically connects to the strongest signal. basically, everything looks right, it shows a strong signal and says i'm connected to the network, but then i can't get online.

  • Since loading Firefox version 5 all my emails from talktalk have all become "undefined" and will not allow me to click onto open box. Only access from other computers with different browsers will. Problem with Firefox or problem with Talktalk?

    I tried going to system restore, but could not open any pages at all after going to a system restore point. Had to reverse this as could not access anything at all then via Mozilla Firefox icon.

    Hi David,
    Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
    Do you have any stored preferences for PDF files in Firefox?
    *[[Applications panel - Set how Firefox handles different types of files]]

  • Firefox starts but can't access any website.same issue is experienced with Chrome, not Explorer

    Hello, I have an issue with surfing with Firefox. The browser starts but can't access any website. The same issue is experienced with Google Chrome. On the other hand, Internet Explorer works smoothly. Thanks

    Some problems occurs when your Internet security program was set
    to trust the previous version of Firefox, but no longer recognizes your
    updated version as trusted. Now how to fix the problem: To allow
    Firefox to connect to the Internet again;
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
    * Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
    '''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

  • IPhone 5s can connect to wireless WIFI router but can not access internet.

    iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
    TIA
    Rich

    You IT person should be able to sort this out.  But, they seems to be too busy or disinterested to do this.  Suggest you provide the it person with an iPhone to get interested.
    Any could be lots of things.
    The best you can do is to get access to the admin setup for networking on a pc?  The internet settings are all the same.  Only what names the manufactures change from OS to OS. Check and compare parameters.
    Phone works to internet at home, I assume?

  • Need help with setting up a photolibrary on server that can be accessed/edited by multiple users

    Hi:
    I would like to develop an in-house photolibrary for our graphics department. The goal is to be able to add keywords to all our images so that we could have a more dynamic means of searching through our countless scanned images. Lightroom works great with regards to keywording and searching.
    To make it so all the computers in our office could have access to the images, I created a photolibrary on our server that can be accessed by any of the computers in our graphics dept. However, when one computer adds keywords to an image, that info does not show up on any of the other computers. Perhaps this is an issue with the trial version and we need to get the license? A few other people suggested that it might have something to do with my export settings - I tried to play around with the settings but had little luck...Any Advise?
    Thanks,
    Leo

    Thanks for your thorough reply. Is there a way to have one MASTER computer that could create the keywords and have the other computers access the master computer's catlogues - or something of that sort. We are small graphics dept. with three people so even that would suffice.
    Lightroom is not a networked application, and cannot be set up so that multiple computers can access LR via a network.
    The only real workaround with LR is to put the catalog and photos on an external HD and then physically connect the external HD to the computer of the person wanting to use it. So only one person can use the catalog at one time.
    You can look up Digital Asset Management (DAM) software on Google if you really need to have multi-user access and networked.

  • I have movie footage on a 16Gb Sd disk but can't access it on my iMac.  What am I doing wrong?

    I have movie footage on a 16Gb Sd disk but can't access it on my iMac.  What am I doing wrong?

    Well there wasn't exactly an overwhelming volume of help on that!
    Just so you know, having spent an hour talking to Apple and not making any progress I decided to wind back to a pre-server time machine backup.  Phew - everything is working fine again now but I don't have a server!
    Cheers
    Tom

  • Can connect to WLAN, but can't access any web site...

    I have a Nokia E61 that I have configured to access my wirless home network (Linksys). I use personal WPA security, and my SSID is hidden. I loaded the proper settings into an access point setting and when I go to Web, the phone shows that it connects to my Linksys router, but the web page never loads. I eventually get a time out error. If I connect to the same website using GPRS, it loads without any problem.
    Any ideas?

    Thanks for the reply!
    I have looked at my RV082's firewall setup, but don't see anything out of the ordinary. I even disabled the firewall, but it didn't seem to make any difference. What did you have in mind that I should check?
    I get the following error on the E61 when I try to access an Internet website: "Web: Connection Time Out". It takes about a minute or two for the E61 to generate that error.
    Regarding the RV082's ability to assign devices to the right subnet, I have three other PCs on my network (2x Windows XP, 1x Windows 98SE), and they have always connected the first time and every time with no issue. How would I check which subnet the RV082 is assigning to the phone? On a PC, I usually do an "ipconfig /all" at the command line and see what's assigned. Is there an equivalent command for the E61 that I could enter while I'm connected?
    If I remove the RV082 and plug my WAP54G directly into my cable modem, then my E61 can access the Internet. So it's definitely an incompatiblity with the settings in the RV082 and the E61. But before I/we blame the RV082, I have more or less the same problem at my employer's office: I can connect to the office network, but can't access any sites outside the company network. The only difference is the E61's error message: at work I get a "no gateway response" error within a few seconds. It's a company with around 200 employees at that site, and we're certainly not using an RV082 in the office. I have not tried to call Linksys support yet because in fairness to them, they won't know jack s*** about the E61 and how to configure/check the settings.
    Is there something about the DNS settings in the E61 that I'm setting incorrectly? I have them set to Automatic in both IPv4 and IPv6 settings, which is how my PCs are setup at home and what my IT guy at work tells me should be OK.
    Thanks in advance for any more advice!
    BTW, I'm no big fan of Linkys either, but I've had zero problems with my Linksys products. Also, when I have had to contact Linksys for help with a setup, they have always eventually come through and solved the problem. I've tried contacting Nokia and can't even get a live person that can do anything (the E61 isn't supported by Nokia USA, and the UK phone number they gave me was just a recording). If anything, I'm ready to hurl my E61 through the window right now as I've spent way too many hours trying to get this thing to work.
    hk

Maybe you are looking for