Website Blocking? WRT350N Firmware Version: v1.03.7

I am trying to block a few websites through the router, but no matter what I put in, it will not block anything. Any particular reason why. I have other Linksys routers that work just fine, but this model will not work for me. The USB hard drive like this not work either. Any suggestions on either.

Download Firmware 6.27 MB...This is the same firmware you already have on your router...
I would suggest you to flash the router's firmware and reset it and re-configure it...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...See if that makes any difference...
NOTE : Make sure no USB Drive is connecting while upgrading or resetting the router...

Similar Messages

WEBSITE BLOCKING ON WRT54G V6 (Firmware Version: v1.02.8)

Hello Friends,
Short: why some webpages block and others don't using this feature in my router? As mentioned above, I run a small office and am using an ::: WRT54G V6 (Firmware Version: v1.02.8) ::: router.
For instance, I have been successful in blocking sites such as "sex.com" and others. Also, in blocking sites by keywords such as: news, music, vid, nude, etc. BUT, when I try blocking FACEBOOK or TWITTER either by URL or keyword, guess what: IT DOES NOT WORK...!
Any ideas why this happens and how can I be successful in configuring this feature??? I will appreciate this! Blessings...
Solved!
Go to Solution.

Those sites have a random connection and DNS entries. Your best bet would be to use a DNS servcie like DDNS.com or OpenDNS.com service. Point your router to one of those DNS services and there DNS addresses, then set up one of those services to block FB and Twitter. If you use there DNS addresses on your router instead of the ISP DNS, and you block FB and Twitter, users should beable to get to FB or Twitter after that.

How do I determine current firmware version for WRT54G

I've been poking around the site a bit, and note that there are mandatory upgrades to various firmware versions. I'd like to upgrade if necessary, but have no idea how to determine what firmware version I have right now.Message Edited by shelmart on 12-17-200605:36 AM

What is the excact hardware version # of your router? U can find that underneath the router itself, there's a sticker there & its just right below the Linksys Logo. If its version 5 or 6, u can go to this website: www.linksys.com/connect . Download & save Easylink Firmware Tool & then before u run that file after saving, disable first all your internet security like firewalls & anti- virus coz it will block the connection of this software from running properly. That EFL will automatically upgrade the firmware of your router.

WEBSITE BLOCKING ON WRT54G V6

website blocking functionality of the WRT54G V6 router is working using the latest firmware 1.02.0
Step by step procedures: (Complete procedures on how the problem was replicated)
1. Setup the router (WRT54G V6) using the latest firmware 1.02.0.
2. Accessed the router’s web UI and configured Access Restrictions.The following options were set:
   Status :Enable
   Allow :Internet access during selected days and hours.
          AY (WEDNESDAY) FROM (7:50AM - 7:55AM PACIFIC TIME ZONE)
   TEST RESULT : The internet is blocked.
   Under Website Blocking by URL Address block the following sites
          a. www.myspace.com
           b. www.facebook.com
   include the Website Blocking by Keyword (myspace and facebook)
   Save the settings
   TEST RESULT : Failed .. Blocked Websites are still Accessible
3 Assigned static IP on the computer using 192.168.1.5. Clicked on “EDIT List of PCs” button and entered the IP address assigned to the PC.
   TEST RESULT : the URL can be blocked.-->>Successfull
4 Used the MAc Address on the EDIT List of PCs
   TEST RESULT : The URL can be blocked.-->>Successfull
5 Set the IP back to DHCP and used 192.168.1.100 on the EDIT List of PCs.
    TEST RESULT : The URL can be blocked.-->>Successfull
Summary: The WRT54G v6’s feature on Website Blocking by URL Address worked using firmware version 1.02.0.
I am not a teener anymore, I am a woman now - DreamGirls

Those sites have a random connection and DNS entries. Your best bet would be to use a DNS servcie like DDNS.com or OpenDNS.com service. Point your router to one of those DNS services and there DNS addresses, then set up one of those services to block FB and Twitter. If you use there DNS addresses on your router instead of the ISP DNS, and you block FB and Twitter, users should beable to get to FB or Twitter after that.

WRT 110N Website Blocking by URL

How can I deny access to a domain name no matter what they load, like this:
http://www.mydomain.com/launcher
http://game.mydomain.com/controller
http://system.mydomain.com
any of those, how can I block, every day, all day, the domain like this:
*.mydomain.com
so that it will always block that website?
I cannot seem to get the url block to work except if I make a policy with allow, but how does allow block something??
Thanks,
Richard

Ok, I updated the firmware to Firmware Version: 1.0.07 the newest one available for the WRT110
I set the following in access restrictions:
Status: enabled
Access Restriction: all ips 192.168.1.1 to 192.168.1.200
Schedule, Days: 7 days per week
hours: 24 hours
<script type="text/javascript">// translate_strWrite("AccessRestriction",28); // </script> URL 1: www.google.com
everything else I left blank...
Now nothing happens, nothing blocked, everything works.
What should I try now?
Thanks,
Richard

N73 with Navicore needs firmware version 2.0628.0....

Hi folks, I have N73 with v0.0.1 firmware but have been told by Navicore that I need 0.0.3 to run their Personal Europe 2006/1 software. Problem is if you go the Nokia site there is no Firmware upgrade for the N73 handset. Anyone got any idea how to get N73 firmware version 2.0628.0.0.3 or later. Thanks in hope

Well, I took my N73 to the Nokia repair centre and the chap checked my actual phone details against Nokia's internal website and guess what - the model of N73 I have only supports the version of firmware that is currently on it (version 2.0628.0.0.1).
He also explianed there are many different versions of the N73 handset and many different levels of firmware for each version. He kindly re-loaded 2.0628.0.0.1 just to make sure that there were no corruptions. The bluetooth still drops out so:
I have now sent the navicore software back to Mobilefun (who have been excellent) and am contemplating what to do with the Nokia N73 - frisby comes to mind.
I wish Nokia would get there act together BEFORE selling phones rather than using us (mushrooms - kept in the dark and fed) to Beta test their code after - and still no comments back from Nokia on this forum.
EDIT: removed expletiveMessage Edited by jams on 26-Sep-2006
02:24 PM

WRT54GS V7 Firmware version?

Hi all! I've recently bought a WRT54GS V7 cable router/access point. Now, given the problems I've had with previous devices, I'd like to make sure that the firmware is completely up-to-date. However, when I go to the Linksys UK website, and find the product download page, I am asked which version of the device I have. I have version 7, but it is not in the list. Interestingly enough, when I clicked on version 6, and then looked at the firmware version details, it said something like "for version 5 only". My router seems to have version 7.50.0 firmware installed. Maybe this is the version which they all have, and there are not yet any updates available. Does anyone know? Thanks Michael

vness wrote:
Change the default country to US.
Well, I thought I'd tried that already (although it makes no sense to me - I bought the item in the UK).
However, when I look carefully, I notice that my location is being changed back to 'UK' whenever I try to navigate to the 'Technical Support' page. So this time, I've cleared my cookies, it works, and I can find the file.
Someone from Linksys might want to get around to updating the UK page, and sort out the location changer so it actually does change when you tell it to. I'm sure that I'm not the only person in the country to have bought one.
Anyway, thanks for the help, and for the quick response!
Michael

WVC210 Firmware Version 1.1.1

I just picked up a WVC210 and went to the website thinking all the latest spftware versions would be there so I downloaded all. Wanted to flash firmware update before any configuration and picked up latest on website 1.1.0.15 (my mistake, I mistook it as 1.1.15). The camera came out of the box v1.1.1. So I flashed the firmware and realized afterward I actually downgraded the camera. Want to get back to version 1.1.1 but cannot locate it on the Cisco/Linksys site nor the media it came with.
Does anyone know where I can get the firmware version 1.1.1 for the WVC210 camera?
Thanks for any help.
John

I made the same mistake as John in thinking that Cisco posted the latest firmware release on their website. Right after I bought this cam yesterday and configured the device, I upgraded (but actually downgraded by mistake) the firmware to make sure the latest was installed. After that I have been experiencing issues with the motion detection. Before applying that firmware release from their site, the device clearly displayed v 1.1.1. However, after applying the firmware it now displays v 1.1.0.
I called SBSC w/ an request for the original firmware v1.1.1, however this individual stated that the lastest was posted on the website and there was nothing he could do. He basically said that this is the naming scheme of Cisco for their firmware releases (they go backwards in numbering). I find that to be untruthful or a lack of knowledge. I compared there firmware release naming schemes for other IP Cams and have not discovered any of those firmware releases going backwards in the numbering. My belief is that the latest release is available, but has not been posted on Cisco's website. SBSC is not aware and will not be able to help.

E6 firmware version mismatch (Web disagrees with N...

Hi everyone,
I have the following issue:
the E6 tells me firmware version is 021.014, and Nokia Suite (the latest...well I hope ;-)) tells me it's up to date.
the Nokia website tells me that the latest firmware version is 022.014 and that I should use Nokia Suite to update the firmware if I wished to do so...
Looks like I'm running in circles... who's right?
Thanks for any light that can be shed on this :-)
Rod

In my case I have 025 and 022 is visable as the latest firmware...Nokia could do better in this area regarding correct information. . Anyhow, soon you will get Belle...just log in every day on your nokia suite and be patient.
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

What's the latest firmware version for the Xperia Tablet Z?

What's the latest firmware version for the Xperia Tablet Z?
According to the Swedish and British Sony website, the latest version for the Xperia Tablet Z is 10.1.1.A.1.253 released on 17th of May.
But this is the latest version for the Xperia Z (phone) not the tablet Z... Or am I wrong?
It's a bit confusing, when the manufacturer cannot keep track of the phone and tablet...
Solved!
Go to Solution.

Depends on if you have the WiF version or the LTE version. For LTE the latest is 10.1.1.A.1.253 and for WiFi it's 10.1.C.0.344.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

MacBook EFI Firmware version confusion.

According to the Apple support page the latest MacBook EFI Firmware version is:
MB11.0061.B03
My current version is (dug from the About This Mac):
Boot ROM Version: MB21.00A5.B00
SMC Version: 1.13f3
If I try to download and run the version from the Apple website (MB11) the updater reports that the update is not necessary.
My question is, do I really have the latest version? If so, why isn't it listed on the website?
Thanks in advance,
Victor.

Mine also has the same:
Boot ROM Version: MB21.00A5.B00
SMC Version: 1.13f3
I say based on all the screw-ups of the first gen MB forget about it and be happy that the 2nd gen MB seems to be more stable and problem free...so far

Cisco Linksys WRT120N Website Blocking by URL Address.

Hello,
I've been given the task of blocking access to certain websites, facebook, youtube, etc
The router is the Cisco Linksys WRT120N
Ive entered the web addresses in the Website Blocking by URL Address boxes on the internet access policy page but it doesnt seem to work no matter how i do it.
Ive tried to deny internet access but that shuts of all internet access.
Any help would be greatly appreciated!!

Try this.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Firmware version ambiguity

My E52's firmware version is 034.001. Nokia's website show the latest release available is 033.002. How come this is possible ?

Hello pcyservice
There is NOT a way to downgrade/roll-back/revert to a previous firmware without wiping all data. This is specifically mentioned on the firmware update page:
" CAUTION!
This update is not data destructive, however, ALWAYS back up your data before performing any firmware update!
Once you have updated the firmware, you will NOT be able to revert to an older firmware version."
I recommend you disable any unnecessary features/protocols such as Media Server and Active Folders, then reboot the unit.
If you are still experiencing performance issues, please contact LenovoEMC support to troubleshoot further.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Great site to check firmware versions of ALL Nokia...

Hi All
Just want to share a great website that I just found. It allows you to check firmware versions of almost ALL Nokia mobile phones, including E series and other legacy phones. It also lists the Product Codes applicable for the firnware versions.
http://hunajatehdas.net/nokia/firmware/en/model:E72-1
No sure if anyone has shared this before, just share with you guys anyway.
Cheers,
bbao
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.
Solved!
Go to Solution.

"For nostalgia reasons".... frankly speaking, that's probably just the reason that i could not stop myself from bookmarking and sharing the link, haha!
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

WRT350N firmware feature request

The addition of a printer server to the next firmware release for the WRT350N (hardware version 2.0) would greatly be appreciated. Any plans for this addition? I gather it is quite simple to add.

Please, one torrent is not enough... needs more connections lol.

Website Blocking? WRT350N Firmware Version: v1.03.7

Similar Messages

Maybe you are looking for