Website connected to Mobile Me, never transferred over to i cloud

Multiple issues here... some i'm sure... very obvious...apologize ahead of time for being completely in the dark in the new I cloud changeover.
1. Never transferred my website to I cloud... Is it gone forever?
2. My original hardware that I created the website on, was stolen, so I was never able to edit the website, because I never figured out how to access the site from my new mac book pro anyway.
3. From aperture, I would publish a proofing page to mobile me for photo clients to look at proofs... can I still do that through I cloud?
4. my current operating system is 10.6.8.. do I need to upgrade, update, to access i cloud?

Since you didn't import the pictures into iPhoto, but merely viewed them while they were on the iPhone, then they are definitely not on your mac. Since you deleted them from the iPhone, they're gone. You didn't by any chance set up Photo Stream? If so, have you looked at the Photo Stream folder in iPhoto?

Similar Messages

Never transferred my website from mobile me

Multiple issues here... some i'm sure... very obvious...apologize ahead of time for being completely in the dark in the new I cloud changeover.
1. Never transferred my website to I cloud... Is it gone forever?
2. My original hardware that I created the website on, was stolen, so I was never able to edit the website, because I never figured out how to access the site from my new mac book pro anyway.
3. From aperture, I would publish a proofing page to mobile me for photo clients to look at proofs... can I still do that through I cloud?
4. my current operating system is 10.6.8.. do I need to upgrade, update, to access i cloud?

Everything on MobileMe has been deleted, I'm afraid.
iCloud does not provide website hosting: you will need to find another service - there are plenty to choose from.
If you could publish a proofing page to MobileMe you can do it to another hosting service (though as said, not iCloud).
Snow Leopard cannot access most of iCloud's facitlities - the situation is explained in this page:
iCloud and Snow Leopard
but none of that is relevant to your question as there is no website hosting. If Aperture has been working fine in Snow Leopard there is no reason why it shouldn't go on working - publishing to another service is perfectly straightforward.

How do I get Lion machine 10.7.2 to connect to Mobile Me? I need my calendars, etc.

I bought a new Lion IMac 10.7.2 and moved over everything it could from my 10.5.8 Imac machine by using target mode since the two migration assistants didn't want to talk to each other.. But it did not move over my addresses, calendar, mail preferences, etc. Apparently Lion 10.7.2 won't connect to Mobile Me (but 10.7.0 and 10.7.1 could). I thought I had till June to move over! I need to keep some of my machines non-Lion because we have developed a ton of software over the years that won't run under Lion. We are upgrading now but it will take a long time to redo all our Director apps. I use IDisk every day to move files from my office machine to my home machine to my laptop to my remote office. This forced march to Lion will really kill my productivity if I can't use iDisk and if I have to archive all my calendar and address files and usb stick them over. I spent an hour and a half with customer service on the phone but he couldn't help me. I asked him point blank "I can see easily all the things I'm losing by going from MobileMe to ICloud. What am I gaining new that I didn't have before?". His answer: "just that it's free". He added "I can suggest some third-party paid solutions for you". He was nice but it didn't solve my problem. Already my iPhone and my iPad are no longer syncing with my Tiger and Snow Leopard machines - I guess they have left me behind. My iPhone shows an old calendar and old address book and my iPad 2's calendar and address book, like my new Imac, is empty. I've never known Apple to be so inconsiderate of their users that for some reason or another can not upgrade. (oh yeah, when you start up your new machine and it asks you if you want to transfer, do it THEN. Even though it says you can transfer later, it didn't want to do it without creating a new user and then we had to move everything over manually, fix permissions, HORRIBLE!) I've now wasted 8 hours on this migration and I give up. I'm still going to use my 10.5.8 and 10.6.8 machines untill I'm forced to abandon iDisk. Forcing you to change ALL your machines to Lion is not reasonable when you have some older, but still very capabile, machines that just can't handle the overhead. Anyone else manage to solve this problem? (Maybe my trouble is that I wanted to change the short_name on my new machine from a different short_name on my old machine?)

Sorry, just how much knowledge does it take to click on a link, locate a phone number for the UK, then dial it?
How do you back up? If you never bought a Mac how would you have backed up? Maybe read a book.
How do you use a compatibility chart? Why don't you check it out first before asking the question?
Rather than wishing you had never bought a Mac, think seriously about whether you're up to even owning any computer.

My iPhone 5 won't connect to my macbook pro retina over bluetooth?

My iPhone 5 won't connect to my macbook pro retina over bluetooth?

Ah, sure it actually won't. I have the same problem, and I contacted Apple Support. They told me that there is an incompatability between the iphone 5 and MacBook Pro Retina such that Bluetooth pairing is not possible.
The Support Agent actually had the audacity to tell me this was part of the design of the OS on the MacBook Pro, like Windows people saying, "That's not a bug. It's a feature!!"
Personally, I think this is insane. While I was trying to tether the iphone to the MacBook Pro retina for an internet connection, there are other reasons related to file transfers for which one would want to pair the iphone 5 with the MacBook Pro retina.
I am hoping this "feature" is fixed in iOS 7, and/or in some dot release of Mac OS 10.8.
By the way, the personal hotspot feature on my Verizon iphone 5 works great either via a wifi or USB connection. There are occaisions, however, when one would 1) not have a USB cable, and/or 2) have another wifi relationship between the phone and a network that one would not want to have to "forget" in order for it not to connect to that wifi network. The Macbook will not find the iphone as a wifi hotspot if the iphone is connected to wifi in the first place. At least mine won't.
WWSJS??? What Would Steve Jobs Say???!!!
OZones

My ipod touch is broken and if i upgrade to ipad, will my music,photos and video files be transfered over to ipad?

My ipod touch won't turn on and I have tried the reset button n home button a few times, it still won't work. So, I'm thinking of upgrading to Ipad but I do not want to lose my files from Ipod Touch. My question is, will all the files I have synced up to date be transfered over to the Ipad? My music, movies and photo files. Thanks

Follow the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements.
It needs some charge to get anywhere at all - that is addressed in Step 3:
Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the iPod.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the iPod in iTunes and choose "restore from backup".
If this procedure doesn't work, you have done all you can and only Apple may be able to help. Have them look at it while you shop for your iPad

HT201269 My wife switched from an iPhone 4 to an iPhone 5. Everything transferred over and service is on the new phone. However, texts are going to her old phone still. Any idea what the problem is?

My wife switched from an iPhone 4 to an iPhone 5. Everything transferred over and service is on the new phone. However, texts are going to her old phone still. Any idea what the problem is?

As long as iMessage is enabled and the old phone is connected to a WiFi access point, it will continue to receive iMessage texts. It won't receive non-iMessage texts nor will it receive any calls.

HTML Code for Full Website and Not Mobile. Site

A frustration with iPhone browsers is that they force you to view the mobile website, as oppose to the full website, if a mobile site exists. Unfortunately, the mobile sites often do not provide the services the full sites do.
Is there HTML coding that can be added to a link to get the iPhone to the full site?

The sites that are directing you to a mobile site is using HTML code to do so. What you really want is for those site to NOT have code redirecting you to a mobile site.
Many mobile website have a link on their mobile site that takes you to the full site. A good website developer might have the site place a cookie in your Safari that tells their site you prefer to visit the full site. After tapping on that link, the next time you visit the site you will most likely not be directed to the mobile site.
But whether or not a redirect happens is the Perdue of the website developer.
Try an alternate browser. Some, like Atomic Web, have a settings area where you can select the type of browser you are using. I have mine set to Internet Explorer. atomic Web then fools the website into thinking I'm on a computer instead of a mobile device and I'm never directed to a mobile site.

View a website on a mobile device

Could anyone point me in the direction of tips/tutorials / APIs etc. that will help me
view/render websites on a mobile device?
I have connected successfully to the internet and effectively read the HTML and then appended it to the
form on my emulator, obviously this gives me the raw HTML so my form has at the end something like:
<p> Here's my webpage</p>
<p> Thanks for visiting etc....</p>How does one go about turning this into a same as it is displayed on the internet.
Am I trying to reinvent the wheel, thinking about it I'm trying to write a browser... aren't I?
Won't that be horrifically complex?
How do existing phones do it?
Thanks
Dan

Thanks for that.
That is exactly what I need.You're most welcome. Happy to be of service.
Although I notice the platform request opens the website on Firefox on my computer rather than in the emulator.
Is there anyway to get it to open within the emulator?Ahem, no. The request is after all to the platform, and the default browser is activated -- in the case of your computer, Firefox.
I assume on a real phone it would use whatever browser is installed on the phone.Spot on. The default browser -- usually the one that came preinstalled, not any added later (like Opera Mini).
But be aware, the API warns that the device "MAY wait to handle the URL request until after the MIDlet suite exits."
Cheers
DanBack atcha, Darryl

Data Usage went up 3GB in one day!!! Never went over in 6 years!!

To start with, I have a broadband card for my computer. Today I turn my computer on and I have three emails sent yesterday from Verizon. First was 12/11/14 @ 3:53 p.m. 75% warning. 12/11/14 @ 4:27 p.m. 90% warning and 12/11/14 @ 4:49 p.m.was a data usage overage alert!! I went on the site to look at "my verizon" and I'm almost over another GB!!! I looked at the breakdown and it states that I used 2.1GB at 1:15 p.m. on 12/11/14 (which I didn't even have my computer on!!) then on 12/10/14 at 3.27 p.m. I used 1.1 GB on what????????????? Is there a way to know exactly what took that much data usage?? I never go over because I watch what I'm loading etc. If I would want to load a game or something, I would check first how much data I have left. Now I have to pay for this extra data when normally I don't even use all my data. That should accumulate like prepaid minutes on a cell phone. Can anyone help me figure out what happened?? Thank you!

Rautie wrote:
Upon further investigation, It could possibly be that windows 8.1 loaded on my computer without my knowledge?? It takes about 3.6GB to do this which is about what my data was over. AAARRRRGGGHHHH. I don't even see a difference from windows 8!!
One of the reasons why I have always chosen to have updates notified that they are available so I can choose when to install them even though I have a landline internet connection without a data cap.

Can't connect to mobile broadband with NetworkManager and Huawei E1550

Hi,
I'm trying to connect to mobile broadband internet (3G) using my Huawei E1550 HSDPA USB Stick and NetworkManager but it won't work.
At first, the LED on the usb device seems to indicate that the connection is established, but immediately afterwards it starts blinking again (which shows that no connection is established).
nm-applet then tells me that I've been disconnected (although the connection was never established).
I installed usb_modeswitch and modemmanager and enabled modemmanager with the systemctl command.
The ID of the device is 12d1:140c, which is supposed to be right after the modeswitch.
Here is the relevant log:
[stecklars@Lars-NB ~]$ sudo NetworkManager --no-daemon --log-level=INFO
NetworkManager[1450]: <warn> (cdc-wdm0): failed to look up interface index
NetworkManager[1450]: <info> (cdc-wdm0): new Broadband device (driver: 'option1, qmi_wwan' ifindex: 0)
NetworkManager[1450]: <info> (cdc-wdm0): exported as /org/freedesktop/NetworkManager/Devices/2
NetworkManager[1450]: <info> (cdc-wdm0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[1450]: <info> (cdc-wdm0): deactivating device (reason 'managed') [2]
NetworkManager[1450]: <info> (cdc-wdm0): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
NetworkManager[1450]: <info> (cdc-wdm0) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
NetworkManager[1450]: <info> (cdc-wdm0) modem state changed, 'enabling' --> 'registered' (reason: user-requested)
NetworkManager[1450]: <info> WWAN now enabled by management service
NetworkManager[1450]: <info> Activation (cdc-wdm0) starting connection 'Verbindung mit event.vodafone.de'
NetworkManager[1450]: <info> (cdc-wdm0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[1450]: <info> NetworkManager state is now CONNECTING
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 1 of 5 (Device Prepare) started...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[1450]: <info> (cdc-wdm0) modem state changed, 'registered' --> 'connecting' (reason: user-requested)
NetworkManager[1450]: <info> (cdc-wdm0) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) starting...
NetworkManager[1450]: <info> (cdc-wdm0): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[1450]: <info> (cdc-wdm0): bringing up device.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) successful.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 3 of 5 (IP Configure Start) scheduled.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) complete.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 3 of 5 (IP Configure Start) started...
NetworkManager[1450]: <info> (cdc-wdm0): device state change: config -> ip-config (reason 'none') [50 70 0]
NetworkManager[1450]: <info> Activation (wwp0s26f7u3i1) Beginning DHCPv4 transaction (timeout in 45 seconds)
NetworkManager[1450]: <info> dhcpcd started with pid 1596
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 3 of 5 (IP Configure Start) complete.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 4 of 5 (IPv6 Configure Timeout) started...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
dhcpcd[1596]: version 6.0.5 starting
dhcpcd[1596]: wwp0s26f7u3i1: soliciting an IPv6 router
dhcpcd[1596]: wwp0s26f7u3i1: ipv6rs_sendprobe: sendmsg: Cannot assign requested address
NetworkManager[1450]: <info> (wwp0s26f7u3i1): DHCPv4 state changed nbi -> preinit
dhcpcd[1596]: wwp0s26f7u3i1: soliciting a DHCP lease
dhcpcd[1596]: wwp0s26f7u3i1: removing interface
NetworkManager[1450]: <info> (wwp0s26f7u3i1): DHCPv4 state changed preinit -> stop
NetworkManager[1450]: <info> (cdc-wdm0): device state change: ip-config -> unmanaged (reason 'removed') [70 10 36]
NetworkManager[1450]: <info> (cdc-wdm0): deactivating device (reason 'removed') [36]
dhcpcd[1596]: exited
NetworkManager[1450]: <info> (wwp0s26f7u3i1): canceled DHCP transaction, DHCP client pid 1596
NetworkManager[1450]: <warn> (12) failed to find interface name for index
NetworkManager[1450]: nm_system_iface_flush_routes: assertion 'iface != NULL' failed
NetworkManager[1450]: <warn> (12) failed to find interface name for index
NetworkManager[1450]: <warn> (12) failed to find interface name for index
NetworkManager[1450]: nm_system_iface_flush_routes: assertion 'iface != NULL' failed
NetworkManager[1450]: <warn> (12) failed to find interface name for index
NetworkManager[1450]: <info> (cdc-wdm0): cleaning up...
NetworkManager[1450]: <info> (cdc-wdm0): taking down device.
NetworkManager[1450]: <info> NetworkManager state is now DISCONNECTED
NetworkManager[1450]: <warn> (pid 1596) unhandled DHCP event for interface wwp0s26f7u3i1
NetworkManager[1450]: <warn> (cdc-wdm0) failed to disconnect modem: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface 'org.freedesktop.ModemManager1.Modem.Simple' on object at path /org/freedesktop/ModemManager1/Modem/1
I'd be thankful if you could help me.
Lars

Here is the relevant part of dmesg, when the connection drops:
[ 1300.891794] option1 ttyUSB0: option_instat_callback: error -108
[ 1300.892296] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 1300.892316] option 4-3:1.0: device disconnected
[ 1300.894497] qmi_wwan 4-3:1.1 wwp0s26f7u3i1: unregister 'qmi_wwan' usb-0000:00:1a.7-3, WWAN/QMI device
[ 1300.906958] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.906966] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.906969] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.912513] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 1300.912535] option 4-3:1.3: device disconnected
[ 1300.912830] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.912837] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.912840] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.917744] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 1300.917759] option 4-3:1.4: device disconnected
[ 1301.787207] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 1302.653814] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 1303.520436] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 1304.387195] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 1304.387273] usb 4-3: USB disconnect, device number 20
[ 1304.993295] usb 4-3: new high-speed USB device number 22 using ehci-pci
[ 1305.132944] option 4-3:1.0: GSM modem (1-port) converter detected
[ 1305.133319] usb 4-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 1305.137914] qmi_wwan 4-3:1.1: cdc-wdm0: USB WDM device
[ 1305.138503] qmi_wwan 4-3:1.1 wwan0: register 'qmi_wwan' at usb-0000:00:1a.7-3, WWAN/QMI device, ea:38:f6:b1:32:0b
[ 1305.138955] option 4-3:1.3: GSM modem (1-port) converter detected
[ 1305.139320] usb 4-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 1305.139537] option 4-3:1.4: GSM modem (1-port) converter detected
[ 1305.139717] usb 4-3: GSM modem (1-port) converter now attached to ttyUSB2
[ 1305.139997] usb-storage 4-3:1.5: USB Mass Storage device detected
[ 1305.140144] scsi33 : usb-storage 4-3:1.5
[ 1305.143268] usb-storage 4-3:1.6: USB Mass Storage device detected
[ 1305.144927] scsi34 : usb-storage 4-3:1.6
[ 1305.183447] systemd-udevd[1917]: renamed network interface wwan0 to wwp0s26f7u3i1
[ 1306.157713] scsi 33:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 1306.161464] scsi 34:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2
[ 1306.168217] sr0: scsi-1 drive
[ 1306.168445] sr 33:0:0:0: Attached scsi CD-ROM sr0
[ 1306.178582] sd 34:0:0:0: [sdc] Attached SCSI removable disk
EDIT: Wow, got it working using wvdial. Would prefer to use NetworkManager and ModemManager, however. Any idea why it isn't working using those?
Last edited by stecklars (2014-01-23 18:50:45)

Website connections suddenly removed - help!

Having used CS5 without issue for a year, I awoke this morning to see that CS5 has completely removed all of my website connections which I was using without any problems only last night.
Can anyone advise how to restore these connections? I've tried to create new connections, but the data I used last year to create my connections is no longer sufficient, as CS5 now demands to know which 'folders' are being used. This was never asked before. I'm foxed.
I need to edit my websites now and have just been given a US-based 9a.m. - 5 p.m. telephone number by someone whose mother-tongue isn't english and who can't help me.
What's the quickest way around this?
Thank you in advance to anyone who can help.
Regards,
Jonathan

Send a private message to you, please have a look and revert back.

HT202667 Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get it transferred over from her Home Sharing account to mine so that I can use it with my PC?

Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!

As Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
regards

Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

S860 and X2, Google not connecting on mobile network.

I live in Sweden. Had my S860 for 3 years and it has been working fine but some months ago it was not connecting on mobile network with crome and play store. Restart and it could work for some time the it was gone again. At the same time Hotspot, skype and OS update is working fine. Got a new sim card i november but it did not help. This was going more and more bad and finally it did not work at all. Tried to reverse OS a few steps back and still not working. So i tought that it was something to do with hardware. Now i bought a Vibe X2. Away from sweden for the moment (Saudi Arabia) but this one does the same when I try to connect. OS update working but Crome says ssl error and Play Store just wont connect. Saw some forums said it might be time and date that was wrong so i tried to change to local format but it was the same. My S860 i was waiting for 6 month before i could buy it (not for sale in Sweden) in Saudi. Haas been very pleased with it so now when it has been messing with me i had no problem to buy a new Lenovo phone. This time just waiting 3 month before i could buy it in Saudi. Hope this is something I can get some help to solve. /Nils

Hi Ragge
Can you tell me your firmware build number(for the S820 and Vibe x2) and Baseband version(for the S820)?Settings->About phone....
''Had my S860 for 3 years and it has been working fine.....Sorry, checked and it is a S820 i have.''
The S820 has been relesed in May 2013.
''Tried to reverse OS a few steps back...''
How did you do that?.
Can you install THIS ->Open the app->MTK Settings->Telephony/BandMode->SIM 1(Do the same for SIM2) and make a screenshot(Power&Volume-) ->post the screenshot here.Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Website connected to Mobile Me, never transferred over to i cloud

Similar Messages

Maybe you are looking for