Website connections suddenly removed - help!

Having used CS5 without issue for a year, I awoke this morning to see that CS5 has completely removed all of my website connections which I was using without any problems only last night.
Can anyone advise how to restore these connections? I've tried to create new connections, but the data I used last year to create my connections is no longer sufficient, as CS5 now demands to know which 'folders' are being used. This was never asked before. I'm foxed.
I need to edit my websites now and have just been given a US-based 9a.m. - 5 p.m. telephone number by someone whose mother-tongue isn't english and who can't help me.
What's the quickest way around this?
Thank you in advance to anyone who can help.
Regards,
Jonathan

Send a private message to you, please have a look and revert back.

Similar Messages

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download:

Internet connection suddenly slow for iMac but OK for iPad and iPod

A few days ago the WIFI internet connection on my iMac suddenly became so slow as to be unusable. However my iPad and iPod Touch on the same network still connect as normal. I have tried everything I can think of together with some ideas posted on various forums, including the following:
Rebooting and reformating the router - a Netgear DG834G v2
Connecting the iMac to the router via ethernet cable
Trying different channels on the wireless network
Altering the physical position of the router
Using Disk Utility to repair the hard drive on the iMac
Using Disk Utility to repair permissions on the iMac
Disconnecting the two external hard drives (one used for Time Machine) in case they were affecting performance
Running anti-virus software on the iMac and deleting any infected files
Disabling the anti-virus software
Deleting the network location on iMac and creating a new one
Trying different DNS servers including 208.67.222.222 / 208.67.220.220 and 8.8.8.8 / 8.8.4.4
Removing Skype from the iMac - the application my daughter was using when the connection suddenly became slow
Trying to browse in both Safari and Firefox
Resetting caches on the iMac
Rebooting the iMac after trying all the above
Swearing at the computer
Pulling my hair out!
None of these have made any difference. Sometimes when I reboot the iMac the first page I browse to loads reasonably quickly but then it immediately slows to a crawl again. The iPad is still connecting perfectly so I don't think it's an issue with the router.
The iMac is a 24-inch 2.8 GHz Intel Core 2 Duo with 4 GB 800 MHz DDR2 SDRAM
Running OS X 10.7.5
The hard drive has a capacity of 320 GB with 62 GB free.
I'm at my wits' end trying to sort this out and don't know what else to try.
PLEASE HELP!

Hi BDAqua,
In Disk Utility the disk is listed as S.M.A.R.T. Verified and comes up with no errors when checked.
Activity Monitor: with no other applications open Activity Monitor itself is using the greatest percentage of the CPU at approx 3%. Opening Safari and trying to load a web page initially used about 20% but immediately dropped back to less than 1%.
Whilst trying to open the web page I noticed on the Network tab that the Data received/sec is generally between 0-20 bytes/sec, sometimes jumps to a couple of hundred bytes/sec and very occasionally peaks at about 1,000 bytes/sec. Data sent/sec is generally mirroring data received.
Free RAM is at 2.5 GB and free disk space is just short of 63 GB (out of a total capacity of 320GB).
In Console I am getting the following messages:
usbmuxd: AMDeviceConnect (thread 0x100781000): could not connect to lockdown port (62078) on device 6 - d81bda1a752c658f30b839f53ca2fdb6a55f4816: 0xe8000084
usbmuxd: _AMDevicePreflightWorker (thread 0x100781000): Pair worker could not connect to lockdownd on device 6: 0xe8000084
com.apple.usbmuxd: stopping
com.apple.usbmuxd: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
In the System Memory tab of Activity Monitor - Page outs : 0 bytes (0 bytes/sec)
Thanks for your help. It's really appreciated. By the way, it's taking me forever to type all this on my iPad!

Contribute Connection Disabled. Help Please!

When I try to connect to one of my sites in Contribute 2 or
Contribute 3, I get the following error.
CONTRIBUTE HAS DISABLED YOUR CONNECTION TO THIS WEBSITE
BECAUSE AN UNKNOWN ERROR OCCURRED. FOR MORE INFORMATION CONTACT
THIS WEBSITE'S ADMINISTRATOR.
Well...the problem is...I am the administrator and I have no
clue what is going on. Other sites that I have in Contribute are
working beautifully. But not this one. What should I do? What can I
do? Please help....angry client has called several times.
Thanks

jb59 wrote:
> Raise your hand if you are using Windows XP SP2 and are
having this problem.
> I've been fighting this issue since May of this year,
and to the best of my
> knowledge, Adobemedia has yet to even acknowledge that
there is a problem with
> CT3. It seems that an IE Security Update has hindered
the ability of CT3 to
> establish a connection and/or download the content when
you try to edit a page.
> Symptoms are: Existing connections suddenly stop
working; New connections
> using known good connection keys can't establish a
connection; Connections that
> work won't let you edit a page (the program stops
responding while downloading
> content).
>
> The only work-around I have been able to find so far is
to replace the
> c:\windows\system32\wininet.dll file with a version that
is compatible with
> CT3. Version 6.0.2900.2904 is the most recent working
version I have found.
> Rename the old file, replace it with the new one and
reboot the computer. I AM
> NOT recommending that you do this. I am simply stating
that this is a viable
> work-around if you're desperate enough to get Contribute
working again. The
> REAL fix is for the software developers to update their
application to work
> with Microsoft security updates.
http://support.microsoft.com/kb/912812
>
> We are using Contribute 3.11 on a secure intranet using
Windows 2003 Server
> with SSL enabled. The problem only ocurs with XP
installations, Windows 2000
> users seem to be immune...at least for the time being.
>
Hi,
We are not able to reproduce the issue using SFTP connection
against
Windows 2003 Server with SSL enabled and SFTP running on it.
The SFTP server we have used is WinSSHD. Can you please let
us know what
SFTP server you have used? And also please let us know your
personal
mail id.
-dmichael

IPod only connects as Removable Disk (E:) and says "Safely Remove Hardware

I recently posted about this problem and since then, I have not been able to do a thing. I have done the 5 R's, and still nothing. This is very frustrating, I just want my iPod so update again. The music and videos are still on it but some songs just totally skip, and few videos don't work correctly. Still, even in disk mode, the iPod connects as Removable Disk (E:) and pops up into the taskbar as "safely remove hardware." I've read about formatting the iPod but I really don't want to mess it up. My patience is waring thin once again.
This weekend I am looking to go to the Apple Store to see if they can see what is wrong with it and get it repaired, or just get a new one. I'll post again on what happens. Any help about my problem will be greatly appreciated!! Thanks in advance!!
Matt
Dell Inspiron 6000 Laptop Windows XP

I've been having a similar problem with ipod software not interacting with the windows system correctly. I was having to go through the "Restore" defaults process over and over (for last three days) with no success. I went to the Apple Store, Genius counter at Westfield Mall today and the tech did a reset to "Restore Defaults" with no problem from an apple machine. He also loaded 2000 songs successfully.
I bought the 60G ipod with video Thursday this week and have been fighting with it since then.
At home, I tried ipod updater with Restore Defaults and the software failed and corrupted the ipod folder index file. I've been trying to do all this through a PCMCI Dual Link card (which has the USB2 port on it) and was getting all sorts of different types of problems and errors (like the folder with the "!") and having no luck getting the windows format through the "Restore Defaults" choice. In an act of desperation I decided to try a regular USB port (I believe it's the 1.1 version, but not sure) on the computer directly and was able to get the factory setting "Restore" into the ipod (but with a slower speed of data transfer). I rebooted the computer and then brought up iTunes to do the sync of songs which took about 1.5 hours (for ~2000 songs) but worked fine. I've shut down and restarted the computer a few more times since then and iTunes still finds the ipod on the same USB port and does the sync without issue.
I believe my problem was the ADS Technology Cardbus Interface Card (which has Firewire & USB 2.0 ports) and plugs into the PCMCI slot on the side of my computer. If I don't use this card and instead use a regular USB (1.1?) port, the wide variety of problems I was having have disappeared.
My 2 cents for what it's worth.

Why are website icons now removed when history is cleared?

Hi,
Just a very quick question:
Why are website icons now removed when you clear the history in Safari?
I have noticed this in the current Lion (and Mountain Lion) versions, this happens, when in previous versions they remained after clearing the history.
Is there any way to change this?
Thanks!

Safari 6
Safari > Help (menu in the menubar) > Show All Help Topics
Search term "Clear History".
"Clearing your history also empties caches, removes website icons, and clears the list of recent searches. Website icons are small graphics that help identify sites on the Internet. You see them in the address and search field, the bookmarks list, and other places. You can see your recent searches by clicking the magnifying glass at the left end of the address and search field when it’s empty".
That is how clearing history works in Safari 6.
There is no way change it.
Best.

I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

See:
iOS: Device not recognized in iTunes for Windows
You need iTunes version 10.7

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

I have problem when i want to update ios 6 to 6.0.1 this message appear " unable to verify update , ios 6.0.1 faild verification because you are no longer connected to the internet" but my ipad is connected . Plz help me .

I have problem with my ipad , when i want to update ios 6 to 6.0.1 this message appear " unable to verify update , ios 6.0.1 faild verification because you are no longer connected to the internet" but my ipad is connected . Plz help me .

Not very helpful but I have the same issue. Plugging in and doing the update via. iTunes will probably work but I find that whole experience annoying (downloading apps not on the Mac, etc..)

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore

HT2188 I just got an iPad mini, when I try to upload my iPhone backup from my Mac i get the message to upgrade my iTunes. I can not seen to find where the download link is for iPads on apple website. Can anyone help?

I just got an iPad mini, when I try to upload my iPhone backup from my Mac i get the message to upgrade my iTunes. I can not seen to find where the download link is for iPads on apple website. Can anyone help?

The message is referring to iTunes on your computer, not the iPad : http://www.apple.com/itunes/download/
The built-in apps on the iPad can only be updated via iOS updates, so if your iPad mini is on iOS 6.0.2 then its up-to-date

"Skype can't connect. Get help fixing this problem...

Well, I downloaded Skype. Then, i sign in to my account. And an error pops up on my computer screen that said "Skype can't connect. Get help fixing this problem". Someone help me fix this?
Solved!
Go to Solution.

Make sure you are running the latest updates both for Windows and Skype. See here for help on getting those: https://support.skype.com/en/faq/FA34438/why-should-i-update-my-skype-version-what-do-i-need-to-do-t...
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

I tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?

i tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
or
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

OBIEE Customization - Removing Help (?) icon Across OBIEE11g Application

Hi,
I am using OBIEE 11g and I need to remove 'Help' (?) icon across OBIEE Application. Can you pls. guide me to achieve it.
Thanks for your help.
Regards,
Ramesh

Instead of removing I would suggest to replace the icon with some other icon
look for the file loc
OFM\Oracle_BI1\bifoundation\web\msgdb\uicomponents\obips.ToolbarHeader.xml
replace ? mark icont with . or dot icon
Hope this helps
~ http://cool-bi.com

Connecting Guitar Port - HELP!

Connecting Guitar Port - HELP!" Hello,
I have just purchased Guitar Port and wish to find the simplest way to hook up.
I have a <span class="mainlink">X-Fi XtremeGamer Fatalty Pro Series sound card with Logitech 5. speakers.
If you follow this link to the manual and go to page 22 you will see their instructions: http://line6.com/data/l/c0a8090bee7b...%20English.pdf
I want to have the sound go through my speakers and not have to crawl behind the computer and mess with the cables everytime I want to play guitar.
Thanks!!!

also note:
http://www.thehangtime.com/gb/gbfaq2.html#pluginguitar

Website connections suddenly removed - help!

Similar Messages

Maybe you are looking for