Website listed in the "never allowed" section of web browsing in parental controls still comes up!

I have listed YouTube.com on my list of websites to never allow for my daughter's user account on my MacBook Pro, but it still allows it!  I am updating to mavericks OS right now - hoping it's a bug that will be fixed. 
Please help if you know what might work.  I bought a Mac because of the parental controls, which are apparently useless!

You might think that if you change "Website Restrictions" under the "Content" tab > to "Allow unrestricted access to websites" that it would bypass the proxy server > entirely. Unfortunately it does not.
Why would you think that? There's not a single commercial cache engine or proxy I'm aware of that works that way. If a site isn't restricted the proxy server simply passes the traffic instead of restricting it. It doesn't change the routing or proxy on the guest machine.

Similar Messages

  • I see an "archive" group listed in the ibook catagories section.  How do i put the books that I've read into that catagory?

    I see an "archive" group listed in the ibook catagories section.  How do i put the books that I've read into that catagory?

    Are you sure that you are not talking about the Kindle App? I might be missing it, but I don't see an Archive section in iBooks categories.
    You can create a section for the books that you have read in collections in the iBooks app.
    Tap on Collections, tap New - name it Archived if that is what you want to call it. Tap Done, then tap the bookshelf anywhere. Tap the Edit button, tap the books that you want to move to Archved - tap Move in the upper left and select Archived.

  • The whole bookmarks section of my browser is gone. Also, the toolbar at the bottom of the desktop is covered up by firefos, that has not happened before and I do not like it.

    The whole bookmarks section of my browser is gone. Also, the toolbar at the bottom of the desktop is covered up by firefos, that has not happened before and I do not like it.
    Please help me set it up the way it was. I like my favorites on the toolbar.

    Are you in the Full Screen mode? Hit '''F11''' and see what happens.

  • How do I remove an entry from the "Store Files" drop down list in the "Import Settings" section of Aperture 3.3.2

    The dropdown list "Store Files" in the "Import Settings" section of Aperture 3.3.2 displays the history of the entries previously added to the list. Some of the entries are no longer valid and I'm trying to delete them but I can't find a way to do this. This is a screenshot. Does anyone know how to do this?

    Once again - the Jive system ate my bullet points and messed up the formatting
    Is the MacOS X version in your signature correct? Then you cannot be using Aperture 3.3.2?
    You should not be seeing duplicate entries in the "Store Files" pop-up menu. This looks like your Aperture Preferences file is corrupted and needs fixing.
    Quit Aperture (and log off and on again, if you are running MacOS X 10.7 or later)
    Then reveal your User Library (from the Finder's main menu bar, the "Go" menu. Hold down the options-key until the library apears in the drop-down menu)
    In the Library folder select the "Preferences folder and locate the file "~/Library/Preferences/com.apple.Aperture.plist"
    Now you can either
    remove the com.apple.Aperture.plist file to the Desktop, to force Aperture to create a new one, but you will have to set again your Preferences from the "Preferences" panel,
    or make a backup copy of the file and edit it, if you are an experienced programmer and have Xcode installed. To fix the drop-down list you need to edit the item "RecentReferenceFolders" and delete the redundant folder names. Enter "recent" into the search field to find it quickly. If you click an item in the list, plus/minus buttons should appear. But only try this, if you know how to edit property lists, otherwise it will be much safer to delete the faulty list and to set your preferences again from the "Preferences" panel.
    Regards
    Léonie

  • How do I get rid of blurred text happens all the time now in Firefox web browser?

    Even when I was registering for this forum the text was blurred and multicolored sometimes. Its very annoying and hard to see. This is all the time with Firexfox. Chrome and IE I have no such issues.
    Also when I was taking an assessment test for a job application none of the answers took and I was told by the program that it was probably my browser. I used to use IE and never had any of these issues but changed to Firefox as I was informed that the security was better. All these issues have been frustrating to say the least.
    Thanks, Rita

    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache
    Press the '''<Alt Key>''' to bring up the tool bar. Then;
    '''Tools > Options > Advanced > Network > Cached Web Content: Clear Now'''
    and
    * Remove Cookies
    Press the '''<Alt Key>''' to bring up the tool bar. Then '''Tools > Options > Privacy.'''
    Under '''History''', select Firefox will '''Use Custom Settings'''.
    There is a button on the right side called '''Show Cookies'''.
    If there is still a problem,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
    While you are in safe mode;
    Press the '''<Alt Key>''' to bring up the tool bar. Then
    '''Tools > Options > Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites and see if there is still a problem. Then restart.

  • How to remove the frame from an ActiveX Web Browser window

    I'm using a web browser window to display content from a web application in my LV front panel.  I'd really like the content to appear as native parts of the front panel rather than being inside a frame.  Is there a method that will allow me to hide or remove the frame from the ActiveX control?  I've tried to make it a custom control and edit the decoration out but that does not seem to work.
    Solved!
    Go to Solution.

    Quite right, in my 8.2 the web browser is already borderless (probably transparent). If your web browser window doesn't look good you should be able to insert it into the activeX one, the other should be a special case.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • Safari can't open a specific web page when parental controls are enabled and don't give access to modify the dock.

    iMac running mountain lion with all updates applied.
    I (my kids) are trying to use www.coolmath-games.com and when I have parental controls enabled and I do not give the ability to modify the dock the page comes up blank.
    It doesn't matter how I have the web controls set (I said allow all just to be sure).
    If I toggle on "allow user to modify the dock" the above page works.  If I toggle it off, then the page doesn't work.
    I *think* this page worked in Lion, but I don't know for sure.  The kids just started complaining about it after I updated to mountain lion.
    Any suggestions?

    iMac running mountain lion with all updates applied.
    I (my kids) are trying to use www.coolmath-games.com and when I have parental controls enabled and I do not give the ability to modify the dock the page comes up blank.
    It doesn't matter how I have the web controls set (I said allow all just to be sure).
    If I toggle on "allow user to modify the dock" the above page works.  If I toggle it off, then the page doesn't work.
    I *think* this page worked in Lion, but I don't know for sure.  The kids just started complaining about it after I updated to mountain lion.
    Any suggestions?

  • New Install - Can access the internet but not with Web Browser

    I just installed Solaris 10 11/06 with my new Ultra 20 M2 workstation. I can ping, complete NSLOOKUP commands on public domain names and can telnet; however, when I try to use the browser it says it cannot connect to the internet. I made sure of the following:
    - Web Browser is not using proxy
    - resolv.conf is accurate
    - defaultrouter is accurate
    - hosts, hostname.. are good
    - netmasks is fine.
    Any thoughts? thanks for your help.

    Is there a firewall between the server and the internet, try telneting the fully qualified domain name again but on port 80 (or 8080) (i.e. telnet www.yahoo.com 80), do you have another machine on this network that can access the internet through a browser (if so check it's settings) also if you have an intranet see if the browser can access that, if these don't work then the problem is settings\config in your browser.
    also try a traceroute and see where the packets are routed and how many hops it takes.

  • I have Firefox 3.6.12 and am working on a Macbook Pro. I have organized all my bookmarks into folders, but there is still a long list of websites listed on the Address Bar BookMark dropdown menu. Please help!

    (Note: I have deleted all Cached items on HD and User area.)

    Follow the steps,
    For Windows user,
    1. Goto Bookmark backup module in firefox window.
    2. Then select Documents and Settings Folder
    3. Choose user account folder Ex: User
    4. Then goto "Application Data" folder
    5. Then choose "Mozilla"
    6. Goto "Firefox"
    7. Then goto "Profiles"
    8. Choose "jj8doebi.default"
    9. Then goto "bookmarkbackups"
    10. Select the .JSON file that you want to restore the backup
    Note that in order to visible the "Application Data" folder, you have to un-select "hide protected operating system files" option in Folder option.

  • I want my "From" address to default to a specific one. I have deleted the outgoing mail server for the one I don't want to use but it still comes up write

    Since Comcast will no longer allow me to "send" from my AOL Address I need to change my "from:" address on every e-mail I send. I thought I could make my Comcast outgoing server the default one and that would take care of it - it didn't. Then I thought I could just delete my AOL outgoing server and Thunderbird would then have to use my Comast Outgoing Server - it doesn't. I can continue to try and remember to change the
    FROM with the drop down list but it would sure be nice if I could save this aging brain of mine and make the software default for me.

    Why not just add an AOL server to Tools/Account Settings/Outgoing Server (SMTP) and then have that server selected in Tools/Account Settings/<i>aolaccount</i> in the Outgoing Server (SMTP) dropdown in the right pane? Use these settings: smtp.aol.com on port 465, SSL/TLS security, Normal password authentication, User name = your screen name.

  • HT1420 How can I get past 5 authorized computers when we have more computers, ipads, iphones than allowed. I want to have parental control by sharing 1 apple ID with one account?

    We have multiple computers, laptops, iphones and ipad in our home. We have kept one account for iTunes in order to monitor what my family downloads for parental monitoring. How can I get approval or allow for more devices to be 'authorized' to purchase from iTunes? I don't want to have to have more than one account that I have to monitor - technology is overwhelming enough to control with all the hackers and distasteful things on the web.

    Authorization applies ONLY to computers.
    ipads/ipods/iphones/apple tvs are NOT authorized at all.

  • Can you disable the status bar on a web browser from an applet?

    I have a signed applet and am using plugin 1.3.1_02 with IE 5.5. I use the showStatus("text") method to display pertinent information to the user in the browser's status bar.
    Currently I see all types of messages being displayed (in IE's status bar) as my applet communicates with the server. I would like to restrict what is shown in the status bar to show my system messages only.
    Can I filter what is displayed or disable status bar functionality programmatically from the applet? Or possibly with a browser/plugin setting?
    Thanks

    Hi,
    I think you can do that with Java to JavaScript communication.
    thanks,
    Srinivas.

  • How do I set the filename using the inline reader with a web browser?

    Hi all,
        Most likely an age-old question that I have not been able to track down an answer for ...
        My application presents a pdf to the user using an embedded reader and gives them the saveas button as an option in the toolbar.
        When they go to save the file it defaults the filename to be the entire URL of the document.
        How can this be changed to be something more user-friendly??
        Thanks in advance for any help you can provide for this issue.
    -Dennis

    I suppose you could use Javascript.
    Or you could display the content within the applet itself.
    But probably the best thing would be to have the server return a URL (or an identifying token to be added to a URL) and the applet could use AppletContext.showDocument to send the user to another page.
    That's my opinion anyway.

  • HT201210 My ipad keeps returning to the home page mid game, web browsing? How can I rectify?

    My Ipad has just started to kick me out randomly when Internet surfing or within Apps. The software is Upto date.

    Hey Big Essex Al,
    Thanks for the question. I understand you are experiencing some performance issues with your iPad 2. Do these issues persist after closing all application and restarting your device?
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Restarting your iOS device
    1. Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    2. After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your device
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    If so, it may be necessary to restore your iPad using a computer with iTunes. Please be sure to backup your iPad first.
    Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
    http://support.apple.com/kb/HT5262
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • Hi friends can i know the procedure to create a web browser?

    HI friends, i am ABAPer and i want to know how to create attachment BROWSER like what we attach for any documents  over mail.
    Example when we click on browser the path of the computer has to be opened and by giving the document name attach and the document will be attached. Please tell me the procedure....
    or let me know to which form i have to post my query..

    Hi,
    If you want any useful answer you may need to rewrite your question.
    I did not understand anything about your question and I guess that I may not be the only one !
    Regards,
    Olivier

Maybe you are looking for