Website needs Microsoft Data Access - Active X Data Objects

I have a number of websites for work that are seem to be built around Internet Explorer. When I try to open them on my Mac at home with Safari, I get message that I pasted below.
I'm thinking this might be related to the fact that when I open them on a PC for the first time it shows a similar message, but Internet Explorer prompts me to download and run "Microsoft Data Access - Active X Data Objects", and then it runs fine.
Based on this I'm assuming it's a lack of these "objects" that are causing this problem. Is there any equivalent to these components for the Mac? Anything I can try to access these websites from my Mac? I've tried using Firefox as well, which has the exact same issue.
Right now I've got to fire up my 2006 PC laptop to use Internet Explorer every time I need access to these sites. I realize I could install windows on my Mac with bootcamp and restart in windows every time I need access, but that seems like a waste just to visit 2 websites. Any advice?
+"Scanning Required components...+
+The user's Internet browser requires proper configuration to access our site. Read the following instructions on how to set up the browser properly.+
+Active Scripting Configuration:+
+Select Tools from the Internet Explorer menu bar.+
+Select Internet Options ...+
+Select the Security tab.+
+In the Web Content Zone list, select «Internet».+
+Click Custom level....+
+In the Settings list, scroll down to the Scripting section.+
+Check the Enable option under the «Active scripting» item and click OK.+
+Click Yes to confirm the change in the security settings.+
+In the Internet Options dialog box, select the «Local intranet» and repeat steps 5 to 8.+
+Click OK to close the dialog box."+

Hi,
Try this...
From your Safari menu bar click Safari / Preferences then select the Advanced tab. Enable the develop menu.
In the menu bar click Develop / User Agent.
Try IE 8, 7, or 6.
No guarantees but can't hurt to try. ActiveX requires Windows.........
Carolyn

Similar Messages

Why is the Microsoft Office Access Database Engine data source looking for a workgroup information file?

While trying to import to MSSQL2012 from SSDT using the wizard from an Access 2013 DB (.accdb) which is password protected, I get the following error with the username blank and the password field correctly populated:
Cannot start your application. The workgroup information file is missing or opened exclusively by another user. (MicrosoftOffice Access Database Engine)
But according to this link:
http://office.microsoft.com/en-us/access-help/what-happened-to-user-level-security-HA010342116.aspx
MSA10 and beyond shouldn't need workgroup information files, although it's not clear to me if they are
created/used or not.
I can point the wizard to some local version of system.mdw at Advanced -> All -> Jet OLEDB:System Database, and then the error becomes:
Not a valid account name or password. (Microsoft Office Access Database Engine)
for any username I can think of.
Questions:
1. Why does this data source insist on looking for a workgroup information file even though user-level security should be disabled?
2. Why does the Open dialog box for the Microsoft Access Database Engine have *.mdb as the only selectable filetype?
3. How can I get around these errors for an .accdb that is password protected?
Thanks!

Hi JordanPG,
To connect to Access 2007 or later database, we need the Microsoft ACE 12.0 OLE DB driver. SQL Server only installs the Microsoft Jet 4.0 OLE DB driver which can be used to connect to Access 2003 or earlier database. Besides, the Microsoft Jet 4.0 OLE DB
driver only has 32-bit version, but the Microsoft ACE 12.0 OLE DB driver has both 32-bit and 64-bit version. However, the 32-bit and 64-bit Microsoft ACE 12.0 OLE DB drivers cannot be installed on a single server.
According to your description, you can use the 64-bit SQL Server Import and Export Wizard to load data from the Access database, so the 64-bit Microsoft ACE 12.0 OLE DB driver is installed on your computer. Since the BIDS/SSDT is a 32-bit application, the
64-bit Microsoft ACE 12.0 OLE DB Provider is not visible in BIDS/SSDT. So, when you said that you select “Microsoft Access (Microsoft Access Database Engine)" in the SQL Server Import and Export Wizard (it is actually the 32-bit version) started by the SSDT,
I think it should be “Microsoft Access (Microsoft Jet Database Engine)”. Because the Microsoft Jet 4.0 OLE DB driver only supports Access 2003 or earlier format, it threw the error “Test connection failed because of an error in initializing provider. Unrecognized
database format 'C:\myDB.accdb'”.
In this situation, you have two approaches to avoid this issue:
Launch the SQL Server Import and Export Wizard (64-bit), and select “Save SSIS Package” to “File System” on the “Save and Run Package” page. Then, the package will be saved to a specified directory. After that, you can add this existing package to a SSIS
project. The status of the corresponding OLE DB Connection Manager should be Work Offline, or the OLE DB Source will throw an error about 32-bit driver if the Connection Manager is not in Work Offline status, you can ignore that and the package can run successfully
in SSDT as long as the project is set to run in 64-bit runtime mode.
However, for the SSDT 2012 integrated with Visual Studio 2012, the 64-bit runtime mode is disabled. In this situation, to run the package in SSDT, you have to uninstall the 64-bit Microsoft ACE 12.0 OLE DB drivers and install the 32-bit one. Here is the
download link:
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Regards,
Mike Yin
TechNet Community Support

Data Source Activation - Master data u201CSource Not Activeu201D (Func. Mod. based)

Generated an export data source, message appears that it is u201CSuccessfully generatedu201D. I then selected the logical Source system and u201CReplicated all data sourcesu201D
I checked in RSA2 (data source repository in BI) and it exits.
Now that I am trying to use the generated datasource to load another MasterData Char Attributes, I get the error message u201DSource Not activeu201C, I am trying to create a transformation from 1st infoObjectu2019s export datasource to this object (both are of the same type etc)..
I am aware that we can use the program RSDS_DATASOURCE_ACTIVATE_ALL but this only works if we can see the datasource is RSDS (which I can not for this Datasource, perhaps the reason being that it is Function Module based? )
How else I could activate it? What other steps I should take or anything that can help me?   Please give your suggestions and I will say THANKS the SDN way.

I had the same problem today with an export DataSource generated on a planning area in our production SCM system.
I debugged running RSDS_DATASOURCE_ACTIVATE_ALL in our QA system for the same DataSource amd saw that the program calls function module RSDS_DATASOURCE_COLLECTION_ACT to do the activation. I ran the function module in production using the same parameters.
Our DataSource is 9A_PRG_PA for source system SCP100. I used SE37 to run function module RSDS_DATASOURCE_COLLECTION_ACT with these parameters:
I_T_OBJNM     9A_PRG_PA                     SCP100
I_WITH_CTO
I_CONTEXT     'ACTIVATE_ALL'
I_FORCE                     X
This made an active version of the DataSource appear, and I was then able to run RSDS_DATASOURCE_ACTIVATE_ALL to activate it properly.
Cheers,
Paul

How to access Workfow Container data in a program.

Hello I need to a access Workflow COntainer data for a particular workitem in a program. How to access these using Tables or standard function modules.
Thanks in advance.

swc_container it_event_container.
swc_create_container it_event_container.
CALL FUNCTION 'SWW_WI_CONTAINER_READ'
            EXPORTING
              wi_id                    = wd_id
            TABLES
              wi_container             = it_event_container
            EXCEPTIONS
              container_does_not_exist = 1
              read_failed              = 2
              OTHERS                   = 3.
if sy-subrc = 0.
READ TABLE it_event_container WITH KEY element = 'name of your workflow container element'.
            IF sy-subrc = 0.
              w_variable= it_event_container-value.
            ENDIF.
endif.
Regards
Kedar

How to access Sybase IQ data from SAP BW

Hi,
I read from Sybase website that we can access Sybase IQ data from SAP BW using Remote Cube through JDBC driver.
Is there any documentation on how to configure that?
Thanks in advance for your help.
Our BW version is 7.01
Sybase IQ is 15.4
Thanks,
CH

Hi,
The two files that are created are one is Control File ( will save as filename_s ) and other is data file. The control file will give you the details of your fields in your Infospoke
regards
Srini
Message was edited by:
Srinivas

Medruck lfm1 data access

I need to have access to LFM1 data in standard MEDRUCK sapscript. In which windows (main, address...) data form LFM1 are filled?
helping naswers I reward with points
regards, Tomek

Client have an wish that some data form LFM1 should appear in different windows.
Printing program fills LFM1 in address windows as you said, but unfortunately I needed this data earlier and in some other windows. For this reason I must extend printing program with user-exits.
Problem is solved

RBAC ISE 1.2 Data Access Permissions

Hello,
We are trying to configure ISE 1.2 patch 7 RBAC profiles.
The idea is that regional admins can only manage their users.
Under User Identity Groups we have several groups for example:
UK-Users
Brazil-Users
Russia-Users
Each identity is then added to the correct group based on their location / country.
We also have a UK-Admin group that contains the UK admins.
Next I crate the permissions and policy...
We have a Menu access permission (Identity Menu Access) that only allows the access to Administration > Identity Management.
We then configure a Data access permission (UK Data Access) that only allows access to User Identity Groups > UK-Users.
Next I set a policy that says UK-Admin group can only access Identity Menu + UK Data).
Then test...
I create a user and add them to the UK-Admins group.
When I login as a UK admin I can see all the data across all user idnetity groups.
I would expect to only see the users in the UK-Users group, but I dont!
Confused.

Please refer "Role-Based Permissions" from
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_admin.html#62254
Data Access Name
RBAC Group
Permissible Admin Groups
Permissible Network Device Groups
Super Admin Data Access
Super Admin
Admin Groups
User Identity Groups
Endpoint Identity Groups
All Locations
All Device Types
Policy Admin Data Access
Policy Admin
User Identity Groups
Endpoint Identity Groups
None
Identity Admin Data Access
Identity Admin
User Identity Groups
Endpoint Identity Groups
None
Network Admin Data Access
Network Device Admin
None
All Locations
All Device Types
System Admin Data Access
System Admin
Admin Groups
None
RBAC Admin Data Access
RBAC Admin
Admin Groups
None

Data Access Library for Oracle like Microsoft Ent Library

Hi there
Is there a plan to create a data access library over the odp.net providers
like the Microsoft Enterprise Library.
For people who have been using Microsoft Enterprise Library for sometime.
The coding examples pasted here on the Oracle website looks newbie and lengthy.
Accessing the provider via a library would
- reduces the amount of code that developers must write
- reduces the need to write boilerplate code to perform standard tasks
- reduces difficulties in changing the database type
As the Microsoft Enterprise Library Team is not keen in implementing odp.net into
the data access code.
Is there anything you guys can do.
It would lot better to have the same library to access Sql Server and Oracle database that way
Thanks
Martin A

You will have to roll your own for ODP.NET
Looking through the source for the Microsoft Enterprlise Library, you use the System.Data.OracleClient as an example.
It can be found here: [EntLibSrc Location]\App Blocks\Src\Data\Oracle\
You can also look at the Enterprise Library Contrib (http://www.codeplex.com/entlibcontrib) which provides community contributions to MEL - there is an open issue for ODP.NET, found here:
http://www.codeplex.com/entlibcontrib/WorkItem/View.aspx?WorkItemId=3167

Oracle version of the Microsoft Application Blocks for Data Access

Where can I find an Oracle version of the Microsoft Application Blocks for Data Access? Is it tied to any specific version of the Oracle Client software? I currently have version 8.1.7.3 installed.

I think that DAAB 3.0 only has support for ODBC and OLEDB, which indeed can be used for Oracle. The Nile 3.0 program has an OracleHelper file, but this one uses the Microsoft Dataprovider for Oracle RDBMS. With some minor changes you can make this version work with the ODP.NET that Oracle provides.
The issue I'm trying to convey is, that it seems hard to use the Microsoft Application Blocks using ODP.NET. As I described earlier, the LOBs and REF Cursors are reference types that actually point to data in the Database. This means, that the Connection to the database must be open to get to the Data.
In the DataHelper, you open the Connection and get the data you need. The DataHelper should then clean up and close the Connection. Then you pass the data to the caller. However, since we're dealing with Reference types, a closed connection means no data.
So I guess the only way to make this easy to use and not having to assume the caller/developer will open and close connections, you must copy the data in an instance of a DataSet, before you close the connection and then pass the Dataset back to the caller.
I wonder if people have delt with this issue and what their solution looks like.
thnx

HR employee data (ONLY ACTIVE EMPLOYEES) needs to be sent from one SAP syst

Requirement: HR employee data (ONLY ACTIVE EMPLOYEES) needs to be sent from one SAP system to another SAP system.
E.g. of process followed u2013
Tcode - PA30 - Action type u2018Hireu2019 is created for employee A, B, C & D for a specific date. Later another action u2018Retirementu2019 is created for the employee C. So in the current system employee A, B and D are active employees wherein employee C is an inactive employee.
Data filtering is set in the Distribution Model wherein only active employees should be passed when an IDOC is created using PFAL.
The IDOC which is created has all the employees A, B, C & D. The only difference being that for Employee C the segment which has the status u2018Retirementu2019 is discarded and hence this does not satisfy the requirement.
Is there any way in which the Inactive employee (e.g. retired) is restricted from being sent to the IDOC.
Please advise.
Rasika

Hi Darek,
Thanks for your response.
I cannot use this as the requirement does not allow customised development. I want to know whether the filter can be done solely by customising.
Regards,
Rasika

Need maverick to access iCloud data?? need 4.97GB on start up disc to download...iMac only came with 4GB harddrive..am I out of luck??

I need Maverick to access iCloud data?? need 4.97GB on start up disc to download...iMac only came with 4GB harddrive..am I out of luck??
Am currently running 10.6.8 OSX

You are confusing RAM with HardDrive Space. No iMacs came with just 4GB Drives. Check again in About This Mac under the Apple logo top left.
Pete

I need help on the activation date

I bought the iphone 6 and activate October 16, 2014 but check the information is incorrect. September 16th, 2014 iphone 6 has not been sold but why reactivate information such statement?

Hi Friends\Seniors,
This is the Table with Data....
COMPANY_ID COMPANY     YEAR     DUE_DATE     STATUS     CURRENCY_CODE     CREATE_DATE     LAST_UPDATE_DATE     LAST_UPDATED_BY
10001     Lanscer ltd     2005     01.11.2005 16:06:25     Scheduled     USD     08.01.2005 16:06:00     07.12.2006 10:07:17     1005150
10002     Wipro ltd     2006     01.06.2006 00:00:00     Rejected     USD     08.02.2006 16:06:25     08.11.2006 16:41:44     1005150
10003     Sector Ltd     2006     01.10.2006 16:06:25     Approved     INR     01.01.2006 16:40:22     09.11.2006 11:04:19     1005151
10004     Creative ltd     2007     20.12.2007 00:00:00     Approved     USD     21.01.2007 16:27:06     21.04.2005 16:27:06     -1
10005     Simpsons ltd     2007     01.07.2007 00:00:00     Scheduled     USD     21.01.2007 16:27:06     21.04.2007 16:27:06     -1
10005     Signs ltd     2007     01.12.2007 00:00:00     Scheduled     USD     21.01.2007 16:27:06     21.04.2007 16:27:06     -1
and i need the records of the Due Dates based on the Year
Thanks in Advance
Regards
Seenu

Failed to open the console and System Center Data Access Service wont start - SCOM 2012

Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=============================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=============================================================
Failed to connect to server ' xxxxx'
Date: 16/09/2013 20:36:16
Application: Operations Manager
Application Version: 7.0.8560.0
Severity: Error
Message: Failed to connect to server 'xxxxxx'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could
be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively
refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
=============================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
================================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Yes, i change the credentials, but doesnt work.
Yes, i put the events in the
main question!
Events Logs:
=======================================================
Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=======================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

How can I set up a new user account that has access to iPhoto data on Admin account?

I have set up a new user account for my son. I have set up his parental controls but I would like him to have access to the data in iPhoto and iTunes from the Admin account. I do allow him access to the applications with the parental controls, but they are empty. Thanks for your help!

Is your regular user an Admin?
Yes. So is the new account I tried to set up.
Are these apps installed in the main /Applications folder?
Yes.
Are they App Store apps or installs from disc/download?
Both, but App Store purchases are a clear minority, and aren't much of a problem, due to the ease of re-downloading and activating. The downloaded programs are the ones that present the problems. I have not been good about archiving serial numbers and the like, mostly because I've never had a problem like this before.
What specific apps are you having trouble with? For instance, I know that MS Office and Adobe CS5 for perfectly well for all users on my MBP.
This is a very long list. Let me give you some of it, and if you really need all of them, I'll add to the list later.
1Password 4
ABBYY FineReader for ScanSnap
Adobe Acrobat 8 Professional
Adobe Photoshop Elements 8 plus On ONE add-on filters
Burn
calibre
DiskTracker
Dragon Dictate
Flv Crunch 1.5.0
GraphicConverter
Harmony Assistant
iBank
iSkysoft iMedia Converter Deluxe
MacX Video Converter Pro
QMidi
Screenium
Unison
WireTap Studio
Also, what troubleshooting steps have you taken so far?
Not much, since I have no idea where the problem is. I looked for some central repository of software serial numbers or activations, but didn't find one.

What are the OLAP cube data access auditing capabilities

Hi All,
We are currently activating RDBMS fine-grained-audit (FGA) policies on our datawarehouse to comply with security policies in place in our company.
Part of our datawarehouse store financial confidential data for which we need to perform access auditing.
The confidentail data reside in fact tables that are also used to feed OLAP cubes.
Are there FGA capabilities (or similar) available to audit access to confidential data stored in OLAP cubes ?
Thank you.
A. Walrant

Hi All,
We are currently activating RDBMS fine-grained-audit (FGA) policies on our datawarehouse to comply with security policies in place in our company.
Part of our datawarehouse store financial confidential data for which we need to perform access auditing.
The confidentail data reside in fact tables that are also used to feed OLAP cubes.
Are there FGA capabilities (or similar) available to audit access to confidential data stored in OLAP cubes ?
Thank you.
A. Walrant

Website needs Microsoft Data Access - Active X Data Objects

Similar Messages

Maybe you are looking for