Website not displaying correctly when uploaded to internet

Hi there,
I've created shadows on one of my websites using gradients and aligning them with boxes to create the background to parts of the website. It displays fine in Muse, but when I upload it, it's not aligned. Here is the website: http://www.hutchambulance.ca/index.html
You can see on the Home page, that the orange column is not aligned properly and the shadow has a bit of a gap at the top on the right-hand side on the white part. I've tried aligning them in Muse by making sure they are the exact same width/height in pixels and selecting both items and using the align function.
If anyone can help me figure out what I am doing wrong, that would be great.
Thank you!

Still looking for help with the above issue.... if someone can help me out, that would be great. Thanks!

Similar Messages

Why exchange rate is not displayed correctly when I create the PO in SRM?

Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?

Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate)

Eurosign not displayed correctly when picked from database

Hi ..
I'm having a problem getting a eurosign stored in an Oracle Database to be displayed correctly in my Crystal Reports 11.5.
When using the built in (preview) Crystal Viewer, the eurosign is displayed correctly, but when I want to print the report directly to a printer or to export it to pdf the eurosign is displayed as a box?
It only haapens when i need to pick the eurosign from the database. If I insert in a textbox on the report, it will show correctly.
Please Help.
Best regards,
Jacob

What is the source of the text stored in the database. I ran into an issue a ways back where someone was copying news articles from a website into their database and the euro symbol would not display correctly (unless the option HTML Text Interpretation was used).
You might want to do a quick check to see if it is stored as an ascii character using a formula similar to the following;
asc(mid({database, x, 1}))
where x = the position of the euro symbol in the string.
The formula result should be 128.
Edited by: Graham Cunningham on May 22, 2009 12:20 PM

Website not displaying correctly. Firefox is changing the character set to Western (ISO-8859-1) automatically.

Normally I have set Firefox (or it's set by default) to Character Set Unicode (UTF-8) and everything displays perfectly. I've never had a problem before.
Now however, whenever I upload my own website, for some bizarre reason on that particular tab (and only that tab) the Character Set is changed over to Western (ISO-8859-1) and then there's a few characters within my site that do not display correctly, namely apostrophes and hypens.
It definitely isn't my software (Serif WebPlus X4) because the page displays correctly in every other browser. Plus it displays correctly in Firefox if I change the Character set back to Unicode.
PS The site is a work in progress

That happens because the server sends a content-type (<b>text/html; charset=ISO-8859-1</b>) via the HTTP response headers and in that case that content type prevails. The page code is saved with an UTF-8 byte order mark (ï»¿) that you see in this case.
*http://web-sniffer.net/?url=http%3A%2F%2Fwww.valuevisionglasses.co.uk&http=1.1&gzip=yes&type=HEAD&uak=0
*http://httpd.apache.org/docs/current/mod/mod_mime.html#AddType

Websites not displayed correctly

Hi,
since i updated to Safari 6.0.2, many websites are not displayed correctly anymore. instead of pictures i see a blue question mark, sometimes the whoe layout is a mess. this concerns multiple websites, alse like facebook or youtube. when i refresh, it mostly orks, so i think it´s not a plugin-issue
Curiously, also in Mail, some Emails are not displayed correctly.
Thank´s for any suggestions or ideas how to solve that.
Christoph

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write("<br><br><br><br><br><font color='blue'><center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center></font>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

CSS : Website not displaying correctly in IE 7 , ok in Firefox and IE8

Hello all,
I am a newbie designing my new site with CS4. This is my first post to forum, although I have read many helpful hints while proceeding.
I will be grateful for resolving a quirky issue.
My website http://www.chezshuchi.com is not displaying correctly in IE7. IT is displaying correctly in most other browsers. The HTML validation is fine. I think there is some issue with CSS, but I am not able to find it despite spending much time. Will appreciate input.
Two images are attached. The first is the screenshot in IE 7 . The second in Firefox (IE 8 is same).

Change the embedded CSS at the head of the page in Code View as follows:
from

to

Oops - spry menu bar 2.0 does not display correctly when loaded

Oops - obviously I'm new at this. I think I got my graphics loaded now.
Dear Sirs:
I notice bzz31 had a pretty complicated post, so perhaps someone can help me with my complicated problem that has been vexing me for months. I tried the Spry Menu Bar 1.0, but it was impossible for me to edit, and I was delighted to see Spry Menu Bar 2.0 come out. However the 2.0 version has been frustrating me as well.
I can get my menu bar to display properly in Live View, as shown below.
However when I load everything onto the server, the menu bar does not display correctly, as shown below:
I don't quite understand the code "file:///" but I interpret it to mean that the Spry-UI-1.7 folder is in the topmost folder of MacPro5-Docs, which is my hard drive. Here's the code I'm having trouble with:
Here's my computer directory, shown below:
Since my index file is two folders down from Spry-UI-1.7, I loaded the files onto the server similarly, as shown in the next three pictures:
(The picture below is the same as the one just above, but now you can see the path from index to Spry-UI-1.7.)
I would be most appreciative if someone can help me.
Thank you.

Have a look at the following links
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/SpryMenu.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js" type="text/javascript"></script>
<script src="file:///MacProG5-Docs/Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js" type="text/javascript"></script>
<link href="file:///MacProG5-Docs/Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
Each of the above points to a file on your local system and cannot be found by the remote server.
Replace the red coloured parts with http://www.twhsbands.org/ will remedy the situation.
You also have some remnants of the other SpryMenuBar that should be removed from your markup.
Gramps
Wel, so much for the red coloured parts, they did not show up.
The red coloured parts read file:///MacProG5-Docs/

XML not displaying correctly when larger

Hi,
When my XML dataset exceeds 2350 lines, SpryDOMUtils.js seems to ad a <tab> to the XML string and it's not displayed correctly in it's container.
I included 2 screenshots to show what's happening. Tnx a lot!!

Sorry for the delay, I have spent some time trying to find the culprit. Finally I decided to start afresh with the following markup, which works quite well in all browsers.
<!doctype html>
<htm>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="SpryAssets/SpryAccordion.css" rel="stylesheet" type="text/css">
</head>
<body>
<div id="Accordion1" class="Accordion" tabindex="0">
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 1</div>
    <div class="AccordionPanelContent">
      <div id="div1">
        <table align="top" cellpadding="5">
          <tr id="tr1">
            <td valign="top">{datum}</td>
            <td valign="top"><a href="{link}">{inhoud}</a></td>
          </tr>
        </table>
      </div>
    </div>
</div>
<div class="AccordionPanel">
    <div class="AccordionPanelTab">Label 2</div>
    <div class="AccordionPanelContent">Content 2</div>
</div>
</div>
<script src="SpryAssets/SpryAccordion.js"></script>
<script src="SpryAssets/SpryData.js"></script>
<script src="SpryAssets/SpryDOMUtils.js"></script>
<script src="SpryAssets/SpryTooltip.js"></script>
<script src="design_template_info12.js"></script>
<script type="text/javascript">
var Accordion1 = new Spry.Widget.Accordion("Accordion1");
</script>
</body>
</html>
May I suggest that you copy and paste the markup into a new document to then start adding your own stuff, making sure that you test in IE7 or IE8 at each step.
Note that I have left xpath.js out of the markup. I think it will work either way. Just keep an eye on it.
PS
I did reformat the XML to delete all of the empty lines. Not sure if this helped or not. You can do this within DW as follows
Message was edited by: Altruistic Gramps

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

Websites not displaying correctly

Just installed Firefox 7.0.1. (on Windows 7). Several websites not displayed properly, eg BBC which gives this message: "This page is best viewed in an up-to-date web browser with style sheets (CSS) enabled. While you will be able to view the content of this page in your current browser, you will not be able to get the full visual experience. Please consider upgrading your browser software or enabling style sheets (CSS) if you are able to do so." Any suggestions?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Website not displaying correctly in chrome

Tonight, I updated muse to v2.1, build 974, cl 770522. I then made a few changes to my website www.drselenasnow.com. When I attempted to display it in chrome, there was a weird doted line on the left side of my website and the coloring of the menus was misaligned. The website looks fine on explorer. Can anyone explain how to fix this?
Thanks,
Joe

Hello,
I just checked your website on Google chrome and Internet Explorer but could not see any were no dotted line or misaligned coloring when compared to Internet Explorer view of the website.
Please confirm if the issue is already resolved or it might be specific to your computer. in that case you can test in on some other computer.
Please have a look at the screenshot of your website in google Chrome :
http://trainingwebcom.worldsecuresystems.com/SachinFTP/2012-09-26_0023.png
Regards,
Sachin

Website Not Displaying After FTP Upload

I have recently built a HTML/CSS website with Dreamweaver CS5 as a redesign for a client - it is my first website built through DW - and uploaded all the files via FTP. I removed all the former files/pages and it says my files have uploaded to the remote server...but the website does not display when I go to the URL. Instead a 404 error page displays.
This is my very first time using FTP, so I have no idea what I am doing wrong. (FYI: I have cleared my cache.) I have a default index page...and it is located in a "Pages" folder. Do all my pages need to be out of this folder in order to be accessed?
The URL is http://www.4hislove.com
Here's a snapshot of my remote server/local files:
Thank you for your help. Please forgive my ignorance!

You have no default page in the site root. You've put your index page into a subfolder called pages:
http://www.4hislove.com/pages/
For starters, you should move index.html to the site root - but you need to think carefully about how you want to organize your site files.

Websites not displaying correctly since upgrading to FF 10.0

Since upgrading to FF 10.0 on Mac OS X 10.7.2 i have noticed that some sites are not loading correctly or they do not function like they used to.
For example:
1. The login page for Tumblr displays just the background image, not the login form.
2. In the Art section of Newgrounds i can no longer change the content filter by clicking on the icons.
However these sites still work fine with Safari and Chrome. For now i am moving to Chrome unless someone knows what is happening and how i can fix it?

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
** '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
Check and tell if its working.

U00AE is not displayed correctly when executing in Web Browser/Portal

All,
We have symbols like ®, in our data. This is stored and displayed correctly in BI and Bex, When we execute the same in a graph in Web template using WAD it doesnt display properly. Shows some weird characters. Any idea on where and what the setting needs to be?
Thanks
Suja

Suja,
It could be possible that ® is not being recognized by HTML - character set is conflicting...
try this out...
Place this META tag in the part of the document, nowhere else!HTML snippet got from
http://www1.tip.nl/~t876506/entitiesTips.html
also check out which character set this belongs to...
http://www.columbia.edu/kermit/csettables.html
Arun
Hope it helps...
Message was edited by:
Arun Varadarajan

Website not displaying correctly when uploaded to internet

Similar Messages

Maybe you are looking for