WEBSITE NOT REFLECTING EDITS OF HTML FILE THAT WAYS SUCCESSFULLY "PUT" TO REMOTE SERVER

Help! I'm hoping there is a simple reason why I can't get my simple edits to reflect on the website.Here is what I have done/tried:
1. opened and added one simple line of text (with one link to a pdf) to one page of the pre-exisitng site.
2. checked both properties and code to make sure everything matched the preceding, similar line of text
3. connected successfully to remote site through dreamweaver
4. tried both "putting" and synchronizing the file (along with dependent files)
5. the first time I did this I got the message that "no syncronization info is available" from the remote site
6. clicked ok (after going back and unchecking "maintain synchronization information," and making sure there were no sync files in the _name folders)
7. it took a long time to upload all of the files from the local site. when it finished, the log stated that everything put successfully, but the website
doesn't look any different.
Our root folder is saved on our server. We just recently changed web host providers.
Also, for each webpage, there are two html files (one general and then one with a 1, 2 or 3 column descriptor). I edited and put both to the site, but is there
something I should know about these two files?
?? I just need to make some really simple edits and I don't understand why they are not showing up!!??
Any help would be deeply appreciated!!!
Thanks, Jessica

I followed your instructions and was able to see the dummy page in the browser. (no file not found error)
OK - that's good.
I only have one site defined (should I have two - one for local and one for remote?)
Well, one site definition has the ability to contain local and multiple remote site specifications. Under the basic Site category in the Site definition, you will see the path to the local root folder. Under the Servers category, you will see each server that has been defined - usually a Remote server (that would be your web hosting account) and a Testing server (if you are coding a site with server scripting). It's normally the case, with a simple, static HTML site, to have just Local and Remote details in your site definition.
I called our host (Go Daddy) to ask what the name of the root directory was and they instructed me to just leave that blank. so right now it just appears as \
Actually, it should be either blank or "/" (the regular slash).
If you are able to see the dummy file that you browsed to but still do not see changes made to other files, then it must be that the host is caching files on your site. You would have to ask them that question. Otherwise, you should see changes that have been uploaded immediately.

Similar Messages

Why does Dreamweaver upload a blank page when i "put" a .php or .html file that I just edited. It's

Why does Dreamweaver upload a blank page when i "put" a .php or .html file that I just edited. It's like Dreamweaver isn't putting the complete file. So when i check my work (refresh the page), it is now blank. This happens about 50 percent of the time and can occur with any of the websites I maintain. (If I pull out my macbookpro, i can edit and upload the page, but the screen is smaller and i would rather be at my desktop). I am using CS5 on a MacPro, operating system 10.7.5.

I've never heard of that type of error before. If it were happening to me, here are a few things I would do...
Verify it's DW
     Download Filezilla (free and very nice in reality) and make sure it uploads correctly from there to rule out connection issues
Rebuild Site Cache
     From the Files window of your site, click the menu and go to Site > Recreate Site Cache
Delete DW File Cache
     If the above does nothing, I'd kill my DW Cache File: http://forums.adobe.com/thread/494811
Uninstall, clean, reinstall
     Uninstall the program, use the cleaner tool here: http://www.adobe.com/support/contact/cscleanertool.html to kill everything (Adobe leaves behind things that are picked up again in a normal uninstall/reinstall) then reinstall it.

Hi I need help ..I do not know how to edit a pdf file that I scanned in,

Hi I need help ..I do not know how to edit a pdf file that I scanned in, will someone please tell me what I should do PLEASE HELP

What program are you using? If it is just Adobe Reader you can not edit.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Why does DW CC 2014.1 Fluid Grid load HTML file that contains Google Analytics Tracking Code script so slowly?

I exclusively work in Fluid Grid since my site is a Responsive Web Design. I'm having trouble with slow load time in DW CC 2014.1, when my file, as they all do of course, has the Google Analytics Tracking Code script.
I'm on a Windows 8.1 using a Dell Precision M3800 Laptop with Memory 16GB (2x8GB) 1600MHz DDR3 . Each of our site's 180 or so web pages, of course, has its Google Analytics Tracking Code script. It is placed, following Google instructions, as the last entry in the <head>. Google Analytics does not instruct to place the script in the JS Folder with an scr to it, but rather in the <head>. It takes up to one and a half or two minutes for DW CC 2014.1 to load the Google Analytics Tracking Code script . That is, the grid does not show in Live View until finally analytics.js shows up in the Document Toolbar. A minute or two can add up when every page you load takes this long. And, making new Fluid Grid pages, as is done, through the Save As command; every new page made you have to deal with the minute or two wait time since all those pages have the Google Analytics Tracking Code script. Therefore, this time component alone, assuming I'm accessing and/or making 20 pages per week (and in our business this is easily the case) the math is that I'm wasting between 17 and 35 hours per year just with DW CC 2014.1 loading the much needed Google Analytics Tracking Code script.
I have loaded HTML files that do not have the Google Analytics Tracking Code script as a test and those files load at the normal quick speed.
Therefore, the new Chromium Embedded Framework browser engine has a serious load problem when it confronts an HTML5 file with a Google Analytics Tracking Code script. Oddly, the prior DW CC 2014 version, with the old browser engine did not have this slow-load problem since I was loading these same files in that DW CC version up until October 8th or so.
I think this new browser engine is a Google platform that apparently has a problem rendering or loading a Google Analytics Tracking Code script. That makes no sense.
Anyone else had this particular slow-load problem with DW CC 2014.1?
Thanks.

Wow. That sure solved the slow-load problem, at least using your suggested snippet in a simple test HTML file.
Per Google's instructions, I pasted the snippet before the closing </head> tag. And, even in that positioning in the file; the file loaded at the speed (about one second) that it did prior to DW 2014.1.
Two questions.
Will this snippet provide the same tracking data as my current GA snippet?
Because my current GA snippet is in about 200 web pages, can I retain the old snippet in most of them and place the new snippet in my approximately 5 main web pages as well as my templates so my new pages, as well as my main pages, have the new snippet. That is, can I have both snippets (i.e. old snippet in earlier pages and new snippet in main pages and new pages to be made going forward) in my website at the same time?
Of course I would not have both the old and new snippet in a web page at the same time.
I greatly appreciate any assistance anyone can provide me on this issue and thank all of you in advance.
I've provided code for both simple test files below.
Code for Asynchronous Syntax of GA script:
<!doctype html>




<html class="">

<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Test Asynchronous GA Tracking Code In Head</title>
<link href="css/boilerplate.css" rel="stylesheet" type="text/css">
<link href="/css/style.css" rel="stylesheet" type="text/css">


<script src="js/respond.min.js"></script>
<script type="text/javascript">
var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-73425000-1']);
_gaq.push(['_trackPageview']);
(function() {
    var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
    ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
</script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="div1" class="fluid">
    <div id="test1" class="fluid ">This is the content for Layout Div Tag "test1"</div>
   <div id="test2" class="fluid ">This is the content for Layout Div Tag "test2"</div>
</div>
</body>
</html>
Code for older GA script snippet:
<!doctype html>




<html class="">

<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Test GA Tracking Code In Head</title>
<link href="css/boilerplate.css" rel="stylesheet" type="text/css">
<link href="/css/style.css" rel="stylesheet" type="text/css">


<script src="js/respond.min.js"></script>
<script>
(function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){
(i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),
m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)
})(window,document,'script','//www.google-analytics.com/analytics.js','ga');
ga('create', 'UA-73425000-1', 'auto');
ga('send', 'pageview');
</script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="div1" class="fluid">
    <div id="test1" class="fluid ">This is the content for Layout Div Tag "test1"</div>
   <div id="test2" class="fluid ">This is the content for Layout Div Tag "test2"</div>
</div>
</body>
</html>

How can i edit a .html file with jdeveloper?

hi
when i use ibm websphere, i can edit a .html file visually.
but when i use 9ideveloper, i can not do the same thing.
i do not want to learn writing html code with notepad.
who can help me?
tell me how to deal with this problem.

Hi,
JDeveloper 9.0.3 and 9.0.4 don't have a WYSIWYG HTML editor. JDeveloper 9.0.5 that will be close to 9.0.4 has a WYSIWYG editor for both, HTML and JSP.
Frank

How can I edit an html file in Firefox using View Source?

I have created an html webpage and saved it to my pc. I can't edit the html file in firefox when I right click on the page and select "View Source". I can view the code but I can't edit it. I can do this in IE9.
I thought I was able to do this before in Firefox.
Did my settings change somewhere that I can no longer do this?
Do I have to have something checked in the Web Developer extensions for it to work?
I'm using Firefox 24.0
Thank you for any help with this. :)

The View Source window in Firefox cannot be used to change computer codes. Nor can the Web Developer tools.
Sorry for any inconvenience.
I suggest using Programmer's Notepad.

How do i edit a PDF file that was sent to me in an email?

How do i edit a PDF file that was sent to me in an email?

Depends on the extent of the edits. You will need Acrobat in any case. If the edits or minor, you can use the text edit tool. For major edits, you need to request the original file be sent or see if you can Save As a DOC or related file type. PDFs are not really structured for editing and you are asking for a lot of grief if you want to do much. Exporting is the best way, or even better simply asking the author for the original (non-PDF type).

Multiscreen HTML5: iPhone Output Not Built Correctly (Missing HTML Files)

I need expert help to resolve this issue. Hopefully, this issue will sound familiar to someone, and they can provide some guidance.
Since I started using RH10 a few months ago, I have delved into the details of Multiscreen HTML5 only as much as was needed to get the work done. I have an issue that has me flustered.
By default, I am building my help project for all platforms (iPad, iPhone, Desktop, etc.), with iPad selected as the Default. The iPad & Desktop help both work fine, no issues.
However, when I open the index.htm file in the iPhone folder, it opens the table_of_contents.html screen, which contains nothing but a search field. Additionally, many of the html files (that are in the iPad folder) are not being built for the iPhone folder (missing). When I look at the other folders (kindle_fire, or android_galaxy_tab for example) the files are all there and they work fine.
When I compare the HTML for the Table_of_Contents.htm files for ipad and iphone, they are identical except the default file for iPhone is home.htm instead of table-of-contents.htm. But when I change the HTML to make them identical, I still have the same problem. When I open, it jumps to the searchresults.htm screen instead of displaying the Contents.
When I wipe out the iPhone folder and rebuild it, the results are the same.
So, somewhere, somehow, I have evidently unknowingly either selected or deselected something that caused the missing sections to be excluded (or not be built).
I appreciate any help resolving this issue.
Thank you,
JimC

Yes. Each device can have different content. It could be that some topics have tags and that layout has an expression that is excluding them.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I want to display a HTML file that is stored locally on my machine.

Hello,
I am having a problem with my paths (I believe). I have created a JEditorPane that reads in a HTLM page. If the page is form the web it works fine:
page_jep.setPage("http://www.google.com");However I want to display a HTML file that is stored locally on my machine.
I have tried the following but cant get it to find the stored page:
page_jep.setPage("file:///index.htm");
java.io.FileNotFoundException: \index.htm (The system cannot find the file specified)I have tried putting the index file in both the root directory ( C ) and also the same place as where the class files are.
Any help will be gratefully received,
Harold Clements

Nope, I have tried it:
page_jep.setPage("file://c:\\index.htm");Gives me:
java.net.UnknownHostException: c

Create HTML file that can display unicode (japanese) characters

Hi,
Product:           Java Web Application
Operating system:     Windows NT/2000 server, Linux, FreeBSD
Web Server:          IIS, Apache etc
Application server:     Tomcat 3.2.4, JRun, WebLogic etc
Database server:     MySQL 3.23.49, MS-SQL, Oracle etc
Java Architecture:     JSP (presentation) + Java Bean (Business logic)
Language:          English, Japanese, chinese, italian, arabic etc
Through our java application we need to create HTML files that have to display unicode text. Our present works well with English and most of the european character set. But when we tried to create HTML files that will display unidoce text, say japanese, only ???? is getting displayed. Following is the code we have used. The out on the browser displays the japanese characters correctly. But the created file displays only ??? in place of japanese chars. Can anybody tell how can we do it?
<%
String s = request.getParameter( "txt1" );
out.println("Orignial Text " + s);
//for html output
String f_str_content="";
f_str_content = f_str_content +"<HTML><HEAD>";
f_str_content = f_str_content +"<META content=\"text/html; charset=utf-8\" http-equiv=Content-Type></HEAD>";
f_str_content = f_str_content +"<BODY> ";
f_str_content = f_str_content +s;
f_str_content = f_str_content +"</BODY></HTML>";
f_str_content = new String(f_str_content.getBytes("8859_9"),"Shift_JIS");
out.println("file = " + f_str_content);
          byte f_arr_c_buffer1[] = new byte[f_str_content.length()];
f_str_content.getBytes(0,f_str_content.length(),f_arr_c_buffer1,0);
          f_arr_c_buffer1 = f_str_content.getBytes();
FileOutputStream l_obj_fout; //file object
//file object for html file
File l_obj_f5 = new File("jap127.html");
if(l_obj_f5.exists()) //for dir check
l_obj_f5.delete();
l_obj_f5.createNewFile();
l_obj_fout = new FileOutputStream(l_obj_f5); //file output stream for writing
for(int i = 0;i<f_arr_c_buffer1.length;i++ ) //for writing
l_obj_fout.write(f_arr_c_buffer1);
l_obj_fout.close();
%>
thanx.

Try changing the charset attribute within the META tag from 'utf-8' to 'SHIFT_JIS' or 'utf-16'. One of those two ought to do the trick for you.
Hope that helps,
Martin Hughes

Edge Animate could not find the associated html file - anyway

We have another thread discussing this issue at http://forums.adobe.com/message/5331743
But it is out of date and marked with a green-icon positive solution, so..
still I try to reopen the issue about an error of "Edge Animate could not find the associated html file"
for me, this error remains even after opening and saving corresponding html file.
in fact I don't remember any successful launch of .an file for all my projects
working at win 7, 64 bit

ok I shared this via dropbox
https://www.dropbox.com/sh/gwknsik2j5i4pe0/TB8WGNNLMU

In Blurb trying to upload an album that I have prepared in Adobe, but I can't find any Adobe files that way.

I am in Blurb, trying to upload an album that I have prepared in Adobe ELements 10. To upload I need to navigate in my computer to whatever Adobe folder has the album, but I can't find any Adobe files that way. So I wanted to save the album to
an external drive where I could be sure to find them for the upload
But when I tried to copy the photo album, the dialog box said that the photos will be deleted from the main program. I didn't like the sound of that, so I chose "Backup" which seems to have copied everything from Adobe to my eternal drive, not just the photo album that I want. To make matters worse, but exported folder named for my photo album is not the group of photos that I assembled in Adobe.
How do I upload directly from Adobe the program on my hard drive so I can be sure it is the correct assemblage of photos?

The album photos are just the originals; there are no special copies in the album--it's just a list. Select the photos in the album, then go to File>Export as New Files and send the new copies where you want them.

Why can't the finder in Mountain Lion 10.8.2 find files that have successfully downloaded, or that other programs can find?

Why can't the finder in Mountain Lion 10.8.2 find files that have successfully downloaded, or that other programs can find?
This happens with maybe 1 out of 5 files. These are files that have either an ."aa" extention, or or are libraries that icloud can see, but finder can't.

Files beginning with a period are invisible and library files are system files. Spotlight cannot find either unless configured to do so (btw, this is not a Finder issue but a Spotlight issue.)
Get Spotlight to search system files (and more)
Enter the search term in the Finder window's search field.
Click the [+] button in the search bar to add a search option.
In the first drop down menu choose Other.
Choose “System Files” from the list that pops up (and check the box to place in drop down menu to avoid this step later,) click on the OK button.
Now back in the Finder choose Include from the second drop down menu.

How can i put back files that were accidentally put into trash

How can i put back files that were accidentally put into trash. I'm using Mountain Lion on my Mac Book Pro

command Z if it was the last thing you did.
Control (right) click on any item in the trash folder>> Put Back

Why can't I change my font style, and please don't give me a apple approved generic answer, please give me a reasonable answer as to why, not just because we designed it that way.

Why can't I change my font style, and please don't give me a apple approved generic answer, please give me a reasonable answer as to why, not just because we designed it that way.i see that we have a choice here but why not in Email

This is a forum for users to help other users, and there is no Apple presence
here. Leave your comments at http://www.apple.com/feedback, but do not
expect a response. Apple does not comment on its internal decisions.
Check the AppStore to see if there is an alternative mail app that allows what
you want.

WEBSITE NOT REFLECTING EDITS OF HTML FILE THAT WAYS SUCCESSFULLY "PUT" TO REMOTE SERVER

Similar Messages

Maybe you are looking for