Website problem in (URL) while Upgrading from VS 2008 to VS 2013

Hi All,
I'm upgrading my project from Visual Studio 2008 to Visual studio 2013 Ultimate.
My project contains website while debugging the website pages using IIS express as default most of URL in the website get errors. In Addition using of (Request.ApplicationPath) returns "/".
Issue Description:
VS 2008:
-For ex: we can access web site: <<http://localhost>> :<< Port>>/<<ApplicationFolder>>/<<PageName>>.
VS 2013
-For ex: we can access web site: <<http://localhost>> :<< Port>>/<<Page Name>>.
http://localhost:<<Port>>/ : reference to the application folder
Please i need some help to solve this issue for urgent.
Thanks in advance

Hi Refat,
Since it is related to the ASP.NET, to help you resolve this issue, I suggest you could post this issue in
http://forums.asp.net where asp.net experts live in, and there you would get dedicated support. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Challenges while Upgrading from OBIEE 10g to 11g

Hi Gurus,
This is Kiran again. This time I am back with the upgradation issues. We have a client which is currently on OBIEE 10g. All components are already configured in OBIEE 10g with client on RPD, Catalog and implemented all security levels for those.
Now the challenge is to upgrade all activities which we have configured in OBIEE 10g. I have seen lot of stuff online and understood how to upgrade from OBIEE 10g to OBIEE 11g by simply clicking on ua.bat file. But I am unable to understand the process how it is upgrading the securities and environments.
Can anyone help me out by providing necessary stuff I need to take care of before taking the decision to upgrade from OBIEE 10g to 11g.
And also please clear me whether we will have any challenges in upgrading process. If yes, then what kind of challenges we will face and what kind of necessary steps we need to implement to resolve it.
What kind of Architecture we need to follow?
How Schedulers will get upgraded?
Please help me out with your real experiences (Not the online websites). Your response will be highly appreciated and it will help lot of OBIEE professionals who are in the process of upgradation.
Thanks in Advance to all OBIEE GURUS.
Kiran

Hi Valli,
There is really great information available in this link. But I would like to know whether any one faced any issues while upgrading from OBIEE 10g to 11g. Please do share us few issues....
Edited by: 949144 on Nov 27, 2012 9:44 AM

Unicode error while upgrading from 4.6 to ECC 6.0

Dear All,
I am getting unicode errror while upgrading from 4.6 to ECC 6.0, when iam trying to open downloaded file in excel.
In debugging, error occurs while executing statment "CALL METHOD OF obj_ex_sheet " in the code given below:
FORM open_downloaded_file_in_excel            *
FORM open_downloaded_file_in_excel.
DATA:
    lv_ole_books       TYPE ole2_object,
    lv_ole_sheets      TYPE ole2_object,
    lv_subrc           LIKE sy-subrc,
    lv_title(70)       TYPE c,
    lv_text1(70)       TYPE c,
    lv_text2(70)       TYPE c.
start excel
CREATE OBJECT obj_ex_sheet      'EXCEL.SHEET'.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
CALL METHOD OF obj_ex_sheet     'Application' = obj_ex_app.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_app.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
SET PROPERTY OF obj_ex_app 'Visible' = 1.
open data file: main file
CALL METHOD OF obj_ex_app        'Workbooks' = lv_ole_books.
CALL METHOD OF lv_ole_books      'Open'       = obj_ex_wbook
    EXPORTING #1 = gv_filename
              #2 = 2
              #3 = 0
              #4 = 1
              #5 = 0
              #6 = 0
              #7 = 1.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_wbook.
    FREE OBJECT obj_ex_app.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
FREE OBJECT lv_ole_books.
CALL METHOD OF obj_ex_wbook      'Worksheets' = lv_ole_sheets.
CALL METHOD OF lv_ole_sheets     'Item'       = obj_ex_wsheet
    EXPORTING #1 = 1.
FREE OBJECT lv_ole_sheets.
GET PROPERTY OF obj_ex_wsheet    'UsedRange' = obj_ex_usedrange.
CALL METHOD OF obj_ex_usedrange 'AutoFormat'
    EXPORTING #1 = 18.
SET PROPERTY OF obj_ex_wsheet    'Name'       = sy-tcode.
FREE OBJECT obj_ex_usedrange.
PERFORM free_ole_objects.
CALL FUNCTION 'FLUSH'
       EXCEPTIONS
            OTHERS = 0.
ENDFORM.
regards,
Divya

hi,
In the OPEN DATASET STATEMENT ADD THE ENCODING ADDITION IN TEXT MODE.
Regards,
Balakumar.G
Reward Points if helpful.

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

BAdi & user-exits while upgrade from 4.6c to ECC6

Hello all,
Can anybody put light on how User-exits and BAdi will be effected while upgrade from lower version to ECC6.
Many Thnanks.....
Apps.

Hi,
The main concept of enhancements is to keep the code unaffected during version upgrades
Hence all the BADI implementations and User Exit/Customer exits implementations will be in place and no effect due to upgrade...I hope in case of badi, some new BADI(as part of enhancement framework-GET BADI/CALL BADI) will be added up and the old BADI(Those in 4.6c or below) will not get affected.
Regards
Shiva

OUI-10091 error, while upgrading from 10.2.0.1 to 10.2.0.2

Hi,
While upgrading from from 10.2.0.1 to 10.2.0.2, im prompted with OUI-10091 error,
i tried to find out in google...but couldn't(incomplete answers)
Help me on how to proceed and install the ptach.
Regards,
- Sri

I guess troubled u lot.. but this what the README says:
Note:
If you attempt to install this patch set in an Oracle home directory that does not contain an Oracle Database 10g release 10.2.0.1 or 10.2.0.2 installation, Oracle Universal Installer displays a warning dialog with the following error:
OUI-10091: There are no patches that need to be applied from the patch set Oracle Database 10g Release 2 Patch Set 2
10.2.0.3
The Oracle Universal Installer does not allow the installation to proceed. Click OK, then click Cancel to end the installation.
Log on as a member of the Administrators group to the computer on which you are going to install Oracle components. If you are installing on a Primary Domain Controller or a Backup Domain Controller, log on as a member of the Domain Administrators group.
Start Oracle Universal Installer located in the unzipped area of the patch set. For example, Oracle_patch\setup.exe.
On the Welcome screen, click Next.
In the Specify Home Details Screen, select the name of the Oracle home that you want to update, or select the Path that you want to update from the list, then click Next
If you are installing the patch set on an Oracle RAC cluster, click Next when the Selected Nodes screen appears.
Regards,
- Sri

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html

Price to upgrade from Server 2008 Standard to Server 2008 R2

I need to get the price to upgrade from Server 2008 Standard to Server 2008 R2.
I performed the upgrade and now have a valid license for 180 days. What is the upgrade price and how do I get the license?

Hi, go here to download the licensing information for W2k8 r2
http://www.microsoft.com/en-us/download/details.aspx?id=18795
Thanks
Isaac Oben MCITP:EA, MCSE,MCC <a href="https://www.mcpvirtualbusinesscard.com/VBCServer/4a046848-4b33-4a28-b254-e5b01e29693e/interactivecard"> View my MCP Certifications</a>

Move a project from TFS 2008 to TFS 2013

Hi, we are using 2 TFS servers in our company. TFS2008 and TFS2013 SP4. Now I need to migrate one project (of 6) from TFS 2008 to TFS2013 with all the history and documents from SharePoint services. The TFS2008 is runnig on Windows Server 2008
x86 and SQL 2005 and WSS. TFS2013 is running on Windows Server 2012 R2 nad SQL2012 and SharePoint Server 2010.
I have found some discussions with this topic, most of them with backuping and restoring databases. But it was from TFS 2008 to TFS 2013 using TFSconfig.exe import. But this tool is not available in TFS 2013. Is it possible to do such task without installing
single use TFS2010?
Thanks, regards Martin

Hi Martin,
Thanks for your post.
You want only move team project source files and documents from TFS 2008 to TFS 2013 or you want move the whole team project data(source files and work items…) from TFS 2008 to TFS 2013?
If you want move whole team project data within history from TFS 2008 to TFS 2013, we suggest backup your TFS 2008, and install a new TFS 2010(or 2012) Server using the TFS 2008 backup, then
move the collection from TFS 2010 to TFS 2013 Server directly, after moved successfully, you can delete the unwanted team projects from moved collection in TFS 2013.
If you want only move the source files and document from TFS 2008 team project to TFS 2013 Server, you can create a new team project in TFS 2013 Server, then try use the
TFS Integration Tools to move source files from TFS 2008 team project to this new created TFS 2013 team project, but you need note the limitations in this tool.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem While Upgrading from ECC 5.0 to ECC 6.0

Hi Experts,
I am doing project on upgrading.
there is one program in ECC 5.0, and it is working fine in ECC 5.0
But while upgrading to ECC 6.0 it is giving syntax error.
below I am sending the code.
BEGIN OF lty_s_ekab_key,                             "1001282
         konnr TYPE ekab-konnr,
         ktpnr TYPE ekab-ktpnr,
         ebeln TYPE ekab-ebeln,
         ebelp TYPE ekab-ebelp,
       END OF lty_s_ekab_key.
CLASS lcl_entity_ekab DEFINITION INHERITING FROM lcl_entity_any.
PUBLIC SECTION.
    METHODS: constructor,
             if_any_table_mm~read_line REDEFINITION,
             if_any_table_mm~read_lines REDEFINITION.
PRIVATE SECTION.
    METHODS prefetch
               IMPORTING im_key               TYPE lty_s_ekab_key
               RETURNING value(re_t_ekab)     TYPE lty_t_sorted_ekab.
ENDCLASS.
after checking the systax error , i and getting error like lty_s_ekab_key is unknow.
Plz help me to solve in this issue.
Thanks and Regards
Ganesh Reddy

Hi
In my ECC 6 the defination is like yours:
CLASS lcl_entity_ekab DEFINITION INHERITING FROM lcl_entity_any.
PUBLIC SECTION.
    METHODS: constructor,
             if_any_table_mm~read_line REDEFINITION,
             if_any_table_mm~read_lines REDEFINITION.
PRIVATE SECTION.
    METHODS prefetch
               IMPORTING im_key               TYPE lty_s_ekab_key
               RETURNING value(re_t_ekab)     TYPE lty_t_sorted_ekab.
ENDCLASS.                    "lcl_entity_ekab DEFINITION
So try to re-generate the navigation index
Max

Problems of Port Configuration while upgrading from 4.0B to ERP 6

Hi all,
We are upgrading a system from 4.0B to ERP 6. Will there will be any problems from port configuration side? If any please tell what they might be.
thankyou.

Hello,
We have upgraded from 4.6C to ECC6.0 and did not have any port config issues.
Things to look for:
- RFC destinations, do they still work
- directories used in File type ports, are they still there (they should be)
Hope this helps a bit
Regards
Greg Kern

HELP! while upgrading from 10.6.8 to mountain lion on MacBook pro encountered Mac HD error. Verify indicates Repair Disk needs to run but it will not highlight. Verify Permissions indicates I do not have access. Reinstall does not work. Tx. Freaking out

Really nervous. Can't get any of the support instructions to work. Error occurred while installing mountain lion upgrade from 10.6.8. PLEASE HELP!
I know I'll be checking for responses all night. Thanks

Assuming Mountain Lion did not install, you'll need to boot up from your Snow Leopard DVD (by holding down the C key while you reboot).
Once you've booted from the DVD (be patient, it's not exactly lightning fast!), you'll want to go to Utilities --> Disk Utility...and run Repair Disk.
The problem you're seeing is that there's something not right with your MacBook Pro's hard drive, and Repair Disk cannot be run on the same volume you booted from.
If Repair Disk was run successfully when you booted from the Snow Leopard DVD, and you see indications that whatever was wrong was corrected, you can now boot back up again from the MacBook Pro's hard drive. Once you're up and running on the internal hard drive, try installing Mountain Lion again.

Can you format your hard-drive while upgrading from Leopard do Snow Leopard (upgrade version)?

Hello,
I want to purchase Snow Leopard (upgrade version) but I was planning on doing a format when installing it.
Is it possible?
Thank you!

cocoazenith wrote:
I want to purchase Snow Leopard (upgrade version) but I was planning on doing a format when installing it.
Is it possible?
Yes, the 10.6.3 white retail disk can upgrade 10.5 to 10.6 via the installer, but you can also hold c or option key down while booting from the disk and use Disk Utility to Erase and then install 10.6 fresh.
Naturally all programs and user file will be removed, so you need to backup files first and take stock of your programs that will have to be reinstalled again from original sources.
To get the white 10.6.3 disk, call Apple via the phone, it's not sold online anymore, or search Amazon.com or amc related websites for the disk.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6
However if you choose to upgrade over 10.5, keeping your programs and files (backup files regardless) intact and it proceeds just fine, but want to improve the performance, you can use this method
How to properly defrag a Mac's hard drive
If your upgrading from 10.5 to get to 10.7 or 10.8, I don't advise it. Software Update to 10.6.8 max and stay there, your machine is too old.
Things to consider before upgrading OS X

Deployment error while upgrading from WLS6.1 to WLS9.1

We are upgrading from Weblogic 6.1 to Weblogic 9.1.
We are facing with two issues while upgrading.
1. We are having a start up servlet and that servlet uses Database appender and uses log4j. This class is inside a jar file and this jar is part of the ear file.
The admin server starts but with the following error.
log4j:ERROR Could not create an Appender. Reported error follows.
java.lang.ClassNotFoundException: com.tuiuk.greenfield.foundation.logging.log4j.Dat
abaseAppender
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericCla
ssLoader.java:222)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoa
der.java:195)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoa
der.java:130)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at org.apache.log4j.helpers.Loader.loadClass(Loader.java:160)
at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:
164)
at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.
java:140)
at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigur
ator.java:153)
at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMCon
figurator.java:415)
at org.apache.log4j.xml.DOMConfigurator.parseRoot(DOMConfigurator.java:384)
at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:783)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:66
6)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:61
6)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:60
2)
at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConver
ter.java:460)
at org.apache.log4j.LogManager.<clinit>(LogManager.java:113)
at org.apache.log4j.Category.getInstance(Category.java:514)
at org.apache.commons.logging.impl.Log4JCategoryLog.<init>(Log4JCategoryLog
.java:104)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorA
ccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingCons
tructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImp
l.java:525)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImp
l.java:272)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImp
l.java:246)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
at com.bea.console.preferences.spi.FilePreferencesProvider.<clinit>(FilePre
ferencesProvider.java:53)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.bea.portlet.prefs.spi.ProviderFactory.createInstance(ProviderFactory
.java:78)
at com.bea.portlet.prefs.spi.ProviderFactory.setDefaultProviderClass(Provid
erFactory.java:47)
at com.bea.portlet.prefs.spi.IPreferenceStore$Factory.registerDefaultProvid
er(IPreferenceStore.java:128)
at com.bea.netuix.servlets.manager.SingleFileServlet.init(SingleFileServlet
.java:113)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebA
ppServletContext.java:1641)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManage
rImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
log4j:ERROR Could not parse input source [org.xml.sax.InputSource@5d8e63].
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.
java:141)
at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigur
ator.java:153)
at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMCon
figurator.java:415)
at org.apache.log4j.xml.DOMConfigurator.parseRoot(DOMConfigurator.java:384)
at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:783)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:66
6)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:61
6)
at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:60
2)
at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConver
ter.java:460)
at org.apache.log4j.LogManager.<clinit>(LogManager.java:113)
at org.apache.log4j.Category.getInstance(Category.java:514)
at org.apache.commons.logging.impl.Log4JCategoryLog.<init>(Log4JCategoryLog
2. The second error is
The managed server starts without any problem. Using the appication, we connect to 3rd party library to validate payment details. This 3rd party jar is also part of the ear file.
Basically the ear contains all the ejb jars, 3rd party jars and war files.
In this case we are getting the following error.
com.tuiuk.greenfield.template.navigation.web.handler.GreenfieldExceptionHandler
com.tuiuk.greenfield.foundation.exception.GreenfieldRuntimeException: Locating the PaymentManager Nested exception is:
     java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.NoClassDefFoundError: com/datacash/logging/LogListener
com.tuiuk.greenfield.foundation.exception.GreenfieldRuntimeException: Locating the PaymentManager Nested exception is:
     java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.NoClassDefFoundError: com/datacash/logging/LogListener
java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.NoClassDefFoundError: com/datacash/logging/LogListener
     at weblogic.ejb.container.internal.EJBRuntimeUtils.throwRemoteException(EJBRuntimeUtils.java:95)
     at weblogic.ejb.container.internal.BaseEJBObject.handleSystemException(BaseEJBObject.java:713)
     at weblogic.ejb.container.internal.BaseEJBObject.handleSystemException(BaseEJBObject.java:681)
     at weblogic.ejb.container.internal.BaseEJBObject.postInvoke1(BaseEJBObject.java:447)
     at weblogic.ejb.container.internal.StatelessEJBObject.postInvoke1(StatelessEJBObject.java:72)
     at weblogic.ejb.container.internal.BaseEJBObject.postInvokeTxRetry(BaseEJBObject.java:374)
     at com.tuiuk.greenfield.service.payment.datacash.ejb.PaymentServiceEJB_hlf8l4_EOImpl.getCardType(PaymentServiceEJB_hlf8l4_EOImpl.java:288)
     at com.tuiuk.greenfield.template.orchestration.book.PaymentImpl.getCardType(PaymentImpl.java:190)
     at com.tuiuk.greenfield.template.orchestration.book.BookOrchestratorImpl.getCardType(BookOrchestratorImpl.java:2044)
     at com.tuiuk.greenfield.template.navigation.web.action.book.CheckPaymentCardAction.executeAction(CheckPaymentCardAction.java:109)
     at com.tuiuk.greenfield.template.extension.navigation.struts.action.BaseAction.execute(BaseAction.java:202)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at com.tuiuk.greenfield.template.navigation.web.processor.book.BeachBookRequestProcessor.processActionPerform(BeachBookRequestProcessor.java:81)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at com.tuiuk.greenfield.brand.th.navigation.action.THUserInterfaceFactory.doPost(THUserInterfaceFactory.java:105)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:493)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at com.tuiuk.greenfield.brand.th.navigation.action.THUserInterfaceFactory.doPost(THUserInterfaceFactory.java:105)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:493)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at com.tuiuk.greenfield.brand.th.navigation.action.THUserInterfaceFactory.doPost(THUserInterfaceFactory.java:105)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:493)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at com.tuiuk.greenfield.brand.th.navigation.action.THUserInterfaceFactory.doPost(THUserInterfaceFactory.java:105)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3150)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Caused by: java.lang.NoClassDefFoundError: com/datacash/logging/LogListener
     at com.tuiuk.greenfield.service.payment.datacash.ejb.PaymentManagerEJB.getPreAuthorisationFacade(PaymentManagerEJB.java:255)
     at com.tuiuk.greenfield.service.payment.datacash.ejb.PaymentManagerEJB.getCardType(PaymentManagerEJB.java:158)
     at com.tuiuk.greenfield.service.payment.datacash.ejb.PaymentServiceEJB_hlf8l4_EOImpl.getCardType(PaymentServiceEJB_hlf8l4_EOImpl.java:274)
     ... 66 more
I have added explicitly this 3rd party jar in to the manifest file of the ejb jar that is looking for this jar.
Can you please throw some light in to this.

Hi Sebastiaan,
which database version are you using?
Anyway I would suggest that you get in contact with your DBA and he with Oracle Support.
Based on the bug description this error has something to do with your database and DBMS_STATS (used to calculate statistics for your data) and not really with APEX itself.
Oracle Support should be able to help you to find out which database patch you have to install.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Website problem in (URL) while Upgrading from VS 2008 to VS 2013

Similar Messages

Maybe you are looking for