Website scrolls horizontally when I only want it to scroll up and down? help!

My wedding website is a one page website.
www.nicklovesindia.com
I had anchors scrolling to the left. I fixed that problem but now it scrolls back and forth horizontally.
I made all the images 100% width but I do not understand why it still scrolls back and forth, I tested it on all browsers.
Any help is much appreciated!

Hi,
I checked your site and I didn't get any horizontal scroll bar. Can you please confirm whether or not you are still facing the issue?
Regards.
Aish

Similar Messages

How can I prevent Magic Mouse from scrolling horizontally when I don't want it to?

I recently purchased a Magic Mouse to go with OS 10.6 Snow Leopard. It's a great mouse but it causes 2 problems:
If I leave it on "Scroll with interia" in System Preferences/Mouse, it scrolls horizontally when I don't want it to. Since I mostly work in Word documents, I often lose my place in the document this way. On the other hand, checking "Scroll without inertia" makes vertical scrolling, which I do all the time, a lot harder.
The mouse seems to cause what I think of as "fractures" in Word documents--words and parts of sentences will disappear or get crunched together , then reappear when I select the place where they vanished. They also reappear if I scroll vertically to get the problem area off the screen and then return to it. This wastes a lot of time at best; at worst, I'm afraid I'll lose work. The problem occurred once in a while with a Logitech bluetooth mouse I was using, but not as bad and not all the time.
I love the mouse's ergonomics and would like to keep it, but if I can't solve this problem, I'll have to return it. Would be very, very grateful for any tips! Thanks.

Always nervous about recommending sites I have no personal experience of. On the plus side it doesn't relate to any of the bad sites I am familiar with and it appears to be the developer's site ... but there is no contact point for you to ask questions. You said in your initial post it was to go with Snow Leopard but this version says it is meant for 10.7 and above. Did you notice that? I also notice several other references to Word and mouse and one person found the solution lay in the updating of word 2011 to its highest level. I can offer no more.

6303c -- can't scroll horizontally when reading em...

When reading emails sent in html, I'm unable to scroll horizontally.
The only way I can read these emails is to press 'reply' or 'forward' and then scroll through the text.
Does anyone know of a better solution!?

That can be caused by Firefox releasing memory and doing garbage collection.<br />
If you start scrolling or moving the mouse on the page then Firefox needs to rebuild the DOM and that can take some time on complicated pages (e.g. tables or many nested elements).

Why does Captivate have to convert all the PPTX slides when I only want two?

Hello friendly people : ) ,
I often import Power Point slides into my Captivate projets. Even when I only want two slides from a large Power Point presentation, Captivate converts every slide, and this of course, take quite a bit of time. Is there any way around this?
Thank you.
Ryan

Hi Ryan,
How Captivate does import is, it fetches all the PPT/PPTX source content in the import process and then produces the Selection box where you can choose what all slide you want to bring in and then on proceeding it converts those slides to Cp compatible Slide structure and introduces them at the stated slide location.
What, I understand (Looking at your other thread) you do not link and re-import all slides after making any small change. So, if these modifications are being made by same individual on same machine, he can simply right click and edit the presentation from PowerPoint and save it to bring all the changes (this can be done without switching to linked in library).
Thanks,
Anjaneai

So with iMessage, i am not getting messages on my 4S, only on my MacBook Pro. I don't want this. I only want texts sent to my phone. HELP!

so with iMessage, i am not getting messages on my 4S, only on my MacBook Pro. I don't want this. I only want texts sent to my phone. HELP!

did that. now getting no messages on anything. opened up messages on the Mac and saw i had been sent many that never showed up on my phone.
I tried sending a text with iMessage turned off and while it said delivered, doesn't look like it was ever seen.

My arrow scroll mechanism is no longer there (Firefox 3.6 in Mac) ... I can only move an 'invisible' arrow up and down to the right ...

My arrow scroll mechanism is no longer there (Firefox 3.6 in Mac) ... I can only move an 'invisible' arrow up and down to the right ...
I had first installed F 4.00 beta, but got rid of that one fast ... it couldn't deal with any add-ons, and it was even loading films in YouTube!
I thus installed F 3.6, and have no scroll arrows to the right, but I can move my cursor north or south on the right-hand side, which moves the page.

Wow, lightning fast and absolutely right!
Thank you so much!

My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
**Imediately backup ALL your important data while you can still see things on the monitor
Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
perform SMC reset just to check:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Why is it possible to scroll horizontal when there is none?

Hi there people,
I hope some of you can help me out with this little problem. Put lots of effort in my new portfolio but there is one irritating thing I can't get on with. The option to scroll horizontale is constantly enabled while there is nothing on the side; just blank! Maybe this is because I put images in the header and footer in the master. I want these images fixed in the middle and to be repeated in the browser. How can I do this? Is this a bug or just inexperience?
Here is the link of the trial:
http://nkrouwel.businesscatalyst.com
Please help me out here!
Thanx

Hi,
It sounds like what you're looking for is to have the images as background fills for a rectangle. If you set the rectangle to have no background fill or stroke then set these images as the background for them you can tile (horizontally, vertically, or both) the image and you can set the rectangle to be 100% width. That way the rectangle will always be the same width as the browser and the image will be repeated, or set in the middle of the page and you don't need to tile the image.
Anytime you have an object outside of the browser area in Muse the page will scroll horizontally, so the easiest way to achieve any effect that you want to be 100% width will be to use rectangles, text frames, and any other object that supports 100% width.
Hope that helps!
Dana

How to stop mozilla from closing multiple intenet screens, when I only want to close one?

I switched from Internet Explorer to Firefox. I often have more than one internet screen open. When I go to close one of them, Firefox sends me a message like, "You are about to close 3 tabs." When I tell it to close, I lose all 3 internet screens. I only want to close one. How can I stop that?

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can try to open a new windows via Ctrl+N and use that window instead.
See also:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features

My (Snowleopard) MBP died, but I had it backed up externally with TimeMachine. I bought an Air and used Migration Assistant which worked to bring the data over. However, I've now got two versions of "me" on Air - I only want one with all my info. Help!

I know it's generally recommended (if you're going to bring data from one machine to another) to update the OS on the source computer before transfer. However, my MBP died unexpectedly and my information was backed up with TimeMachine in SnowLeopard. The Air I bought as a replacement runs Lion.
I was able to use Migation Assistant to bring my info/programs/etc over...but I've now got the user set up initially (in store) with Lion when I made the purchase - and I now have a second "persona" that contains all of my backed up information from the time capsule.
Given that the Airs have (relatively speaking) smaller amounts of memory, and that I dont' want to be bouncing back and fourth between profiles, I'm wondering if it's safe to delete the "new user profile" (ie the one set up via Lion while in store) and just use and keep the "me" I brought in from the time capsule.
I've never updated a MacOS before - let alone under these circumstances, so I've got a fair amount of trepidation around the whole process.
What is the best way to wind up with one user profile, keeping all the information from my old machine and deleting anything superfluous as part of a secondary profile?
Thanks in advance for any input you can provide surrounding this process!

Thank you!
I can't tell you how terrified I was when deleting the superfluous account...but it went just swimmingly!

Why is my hard drive full when I only have the operating system loaded and nothing else? No pics, music, nothing...It's the 60 Gig hard drive on the air built in late 2010.

Why is my hard drive full when I'm only running the operating system and nothing else is loaded? No music, pics, nothing! I understand the hard drive is small at 60 gig, but I can't believe the os would take up that much space.

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free on the startup volume for normal operation. You also need enough space left over to allow for growth of your data. Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space. Proceed further only if the problem hasn't been solved. ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root. Back up all data now. Launch the Terminal application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

When I only want to close the current window to return to the previous window, the whole firefox site closes down, I end up back at my desktop & have to start all over again. How can this be fixed?

If I close a window I should be back at the previous window that I was at when I followed a link to this window. At least that's the way Internet Explorer works, which I have used for years. The only thing that prevents me from using Firefox exclusively is that it is very time consuming to have to start all over again from scratch every time I close a window. For instance, say I type "cats" into the search box. It gives me links to a list of "cats" sites. I go to a "cats" website, decide I don't like it so close the window to return to my list of sites, but instead of returning me to the list, I end up at my desktop. Then I have to start all over, just like I had not even been online. Very aggravating. I don't know how else to describe the problem, I can't believe that other people haven't had a similar complaint, unless I just have some settings wrong?

Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
Still works on Windows, and with other browsers... It would be great if a fix is available.

How can I stop iTunes downloading every podcast from the cloud when I only want unplayed podcasts to show in iTunes?

When I set iTunes to automatically download all new episodes and only keep unplayed episodes, it downloads every episode in every one of my podcasts feeds. This means thousands of files, as not every XML feed hosts only a few files. Some host hundreds.
How can I get rid of all these podcasts that I don't want to display? The old way was a superior user experience to the way it is now.

My workaround for this is to set up a smart playlist. I hope this is another one of the issues that gets cleard up when Apple eventually releases an 11.1.1 update.

Getting multiple PDFs, when I only want 1, from a Word doc

When trying to save a Word 2004 document with some pages that are portrait and some landscape as a PDF file (print > save as PDF), the result is multiple PDFs. For example, if the first three pages are portrait, the fourth is landscape, and the fifth portrait again, I'll get 3 PDFs -- pgs 1-3, pg 4, pg 5.
The Word document has a section break inserted at each point where the page orientation changes. So in the example above, there would be two section breaks, and three sections.
Using CutePDF on a Windows machine, I don't have this problem, but there is no CutePDF available for Mac.
Does anyone know a way to address this issue using the Mac's native PDF creation functionality?

That is the way that it is. The Print>PDF function is integrated into the printing system, and changing orientations while printing is not a good thing to do. Doing so would require the System to make assumptions, and that is not the Mac model for doing things.
You can combine the files in Preview afterwards, or you can create the document with the same orientation for all the pages and rotate the ones you want in Preview.

I have an app that doesn't have a full screen option. In windowed mode, is there a way I can block out my desktop and the other apps when using it? I only want to see the app and want everything else to be black. Aspect ratio = perfect square.

IOSX, Mountain Lion.
Many thanks,

With the iPod connected to the computer go to the Music pane for the iPod in iTunes and check the box that says sync only checked songs. The check the songs you want synced and click on Sync. For more info see:
iTunes: Syncing media content to iOS devices and iPod

Website scrolls horizontally when I only want it to scroll up and down? help!

Similar Messages

Maybe you are looking for