Website with calculator I'm trying to use says "inactive plug-in".

The website I'm in and trying to use the calculator states "inactive plug in". I went into "manage plug-ins" and I used to have this website in there, but it's gone (probably b/c of another recent problem I had and fixed). How do I get this to work? THANKS!

Hello Annefran33,
I was delving into our resources looking for additional causes for this issue, as you went to the first place I would have looked as well. I feel I have something here that just might get you back up and running. From an article about Java Security found here: http://support.apple.com/kb/HT5319,
Users may re-enable Java if they encounter Java applets on a web page or Java Web Start applications by clicking the region labeled "Inactive plug-in" on a web page. This security measure is also available for OS Lion systems if the prior update "Java for OS X 2012-003" was not installed.
Take care,
Sterling

Similar Messages

With the left panel, trying to use the Presets, in the tutorial to the left of the commands there are square icons, for example "Lightroom B

With the left panel, trying to use the Presets, in the tutorial to the left of the commands there are square icons, for example “Lightroom B & W Presets”. On my program they are arrowheads pointing to the right. When I click on any Preset, it does not work.
Also, Right Panel, Color, White Balance, “As Shot” only has 2 options (auto & custom) vs. tutorial that has 9 options.

You are not supposed to connect a pair of speakers(as in left and right in a stereo pair)to two separate out jacks on the sound card.the place on the card where headphones/speakers with the mini jack goes is the right place.

HT5559 i'm trying to run java and i'm getting an error when verifying installation that says inactive plug-in

I"m trying to run java and I'm getting a message that says it is unavailable. When I verified installation it says inactive plug-in?

http://support.apple.com/kb/HT5559?viewlocale=en_US&locale=en_US

Exchange 2007 Sending with Second Email Address (trying to use Send As)

I support a company who just bought another company. I'm trying to bring a couple of users' old email addresses in to Exchange and have it work with their old and new addresses. They can receive mail under old and new accounts just fine. Sending
under the old address is the problem. They still need to send under the old address for existing contracts.
My first attempt was to create a distribution group, give it the user's old email address, and then give the user "send as" rights for the group using the Exchange Management Shell. I ended up with the same error I'll detail below.
My next (and current) attempt was to set up a shadow user in AD with the old email address and then give the user "send as" rights to the shadow mailbox. I assigned the "send as" permission by right-clicking on the mailbox and choosing
"Manage Send As Permission" and then adding the real user to the list. In Outlook, I clicked From and then choose the shadow user account from the Global Address Book. This added the address to the From drop down box.
This works, once... Every time I restart the Information Store service, I can get one email to send out successfully. Here is the error I get on every other attempt. Notice it says "send on behalf" in the error. Maybe I'm not
setting it up correctly in Outlook? I didn't make Outlook screenshots but you'll find my AD and Exchange setup screenshots below.
Thanks for the help.
(also posted at http://forums.msexchange.org/m_1800602162/mpage_1/key_/tm.htm#1800602162)
***ERROR START***
Delivery has failed to these recipients or distribution lists:
Tripp Beasley
You are not allowed to send this message because you are trying to send on behalf of another sender without permission to do so. Please verify that you are sending on behalf of the correct sender, or ask your system administrator to help you get the required
permission.
Diagnostic information for administrators:
Generating server:
[email protected]
#MSEXCH:MSExchangeIS:/DC=local/DC=XXXXXXXXXX:XXXXXXXXXX[578:0x000004DC:0x0000001D] #SMTP#
***ERROR END***

open the list of previous recipients and select the ones you need by holding the command button. then press "add to address book".

IPad Air 32GB Wifi model, won't turn on, recover, restore, with error 4005 after trying to use facetime, switched off. :( HELP!

bought my mom a new iPad Air 32GB WiFi model via eBay and got it yesterday. It worked all fine and I even updated it to the latest iOS version. It worked all fine for the next few hours until I tried to have a facetime call using my iPad Air. Somehow within few seconds after the call being initialized, my moms iPad got switched off. I tried almost all the solutions I found via Apple community, google and other sites. None of them worked. ( Restore, Recovery, DFU Mode, Pressing Home and ON/OFF switch etc ) Somehow I managed to connect the iPad to itunes and when i press the restore button, I get error 4005 after 5 - 10 mins appearing 'waiting for iPad' message. I am in Sri Lanka and I have no Apple Stores here, or authorized service providers. since this isn't a fault of the ebay seller, cannot return it too. Please help me!

Hi Tom,
Thank you very much for your time and trying to help me on this issue. I really appreciate it.
I went through those steps more than few time since yesterday ( saw you had posted this solution on a similar issue by another user )
still no luck. Now I cannot exit from DFU mode, or either restore it due to 4005 error. ( since its a new iPad, i only had few apps installed. so not going to loose much data as well ). I also try to exit DFU mode by using few third party apps such as Wondershare Dr.Fone, Phone Rescue, ReiBoot, RecBoot. Only wondershare Dr.Fone app showed me a screen with a message saying the iOS device is 'not in normale mode, press home + off/on button to switch to normal mode, which never worked either.
Really appreciate your help but I am open for more solutions other than Restore, Recovery Mode, DFU mode or any method to overcome error 4005. I would also like to know are there any softwares to diagnose the iPad Air to detect whats wrong with it. so that I can be sure if it is a hardware failure or firmware issue.
Thanks in advance,
Nimasha

I am trying to use the new plug-in for import from aperture. But the "import" button always disappears ... any help out there?

Hi there
I have up-dated LR to the latest version and like to use the plug-in for the import from the Aperture library. I follow the steps suggested by an article, have saved all picture into separate folders (folder = project name) and still, after the analysis of the library, the "import" button disappears and I am stuck and can't import.
Any ideas what can be done/must be done to get this working?
Regards
Diethard

I am having the same issue, i've selected my Aperture library, and the "import" button does not activate. Any idea how to fix?

I am now responsible for editing a website and I am being told to use dreamweaver software. What exactly do I do?

I have been given the responsibility to update/edit a website. It is hosted on dotster and I believe was created using dreamweaver software. I am unfamiliar with this. I tried to use wordpress to edit it - but the dotster helpline is saying that this will not work.
My question is: what do I download and how do I get it to edit the website?

I see "HELLO WORLD" on this -- your main WordPress entry page:
http://www.pittstonknights.com/KofC/index.php
To create a post:
Log in to your WordPress Administration Panel (Dashboard).
Click the 'Posts' tab.
Click the 'Add New' sub-tab.
Start filling in the blanks: enter your post title in the upper field, and enter your post body content in the main post editing box below it.
As needed, select a category, add tags, and make other selections from the sections below the post. (Each of these sections is explained below.)
When you are ready, click Publish.
Nancy O.

Multiple websites with iWeb?

I'd like to create multiple sites with iWeb. For instance, I'd like a personal site and a business site. Can this be done or are we only allowed a singel website?

sjesser...
Since iWeb goes through every page in its calculations when publishing, you might find having two sites together in the same instance of iWeb to be cumbersome if you update one or the other site frequently. Additionally, if you ever plan on hosting your personal and business sites in different places, it will be impossible to edit or publish your two sites independently of one another.
The solution to this would be to keep your personal and business sites in different instances of iWeb....different Domain files. Since you have not yet made your second site, this may be a good time to adopt this practice. You can still publish both sites to the same .Mac account....the difference is that iWeb only has to go through one site when you publish.
Check out this program called iWebSites...
http://mistergregg.com/cocoadrillosoftware/
This software will help you create and maintain fully separate websites with iWeb in an easy to use interface. This is the best time to start.....BEFORE you make that second site! Best of luck!

Is There a way I can make a free password protected website with iWeb?

Hi!
I've been thinking to myself, "I want to make a free website". But I want it passcode protected and free. I am a mac kind of person so is there a way I can make a free passcode protected website with iWeb? I knwo you use to be able to do it with MobileMe, but that's outdated now so could someone please help!

No, you cannot password protect a website with iWeb.
And no, you don't have to be a Mac kind of person either.
So how do they do it?
http://www.thesitewizard.com/apache/password-protect-directory.shtml
More if you search for it :
https://www.google.com/search?q=password+protect+website

Using massive as plug-in and my xio synth hope this makes sense?

Ok I recorded a sound from my xio synth onto a track. after that I opened a new track under the one I just recored on. on the new track I wanted to use my xio as a midi control for my plug-in called massive. Now the sound on the first track I recorded switched to the sound I was trying to use for my plug-in I hope this makes sense?

Nope, does not make too much sense...but I'll take a crack at it.
1. Track 1, is it MIDI? Yes....well probably. I can't see your screen, so I will ***-ume it is.
2.Track 2, is it MIDI? Yes...again with the ***-umption.
You need to make SURE track 2 in the arrange page is ACTUALLY Midi track 2. Right now I think you have two "Midi track 1" on the arrange page. ie you have two trakcs which are referencing the same Midi channel.
In Logic when you create a new track in the arrange page, you have three options:
1. make a new track with the NEXT instrument.
2. make a new track that is the SAME instrument.
3. and from the menu, you can choos what type of track to create as well.
I hope this helps,
Cheers

I had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

Using iPad2 to fill PDF forms with calculating cells

I currently have the PDF Expert app. installed. I have created a PDF form with calculating cells and cells with multiple selections using Adobe Acrobat X Pro. It works on my PC on 2 different PDF reader apps, however when I load it in PDF Expert on the iPad it does not calculate and the multiple selections aren't there. It also does not keep the formatting of the cell. I set the cells up as currency, however it does not show as currency once loaded in the PDF Expert app on the iPad. Is there an app out there for the iPad that will allow PDF form fill in and will also show the cell formatting and calculations? Or is this a limitation caused by iOS? I have also tried Adobe's reader app for the iPad and it doesn't show it on there as well. Any help would be greatly appreciated! Thanks!

I'd be amazed if you could. I wouldn't think it possible to even open a PDF, much less edit one.

Anyone else have difficulty using third party software and websites with the new MacBook Pro with retinal display?

I just returned my new Mac book pro with retinal display after three very disappointing three weeks of trying to use certain websites and other third party programs (Quickbooks, Raintree) that would not function properly. My husband own the previous MacBook Pro version with the built in CD rom and I was able to use those above mentioned websites and problems with the no difficulties. Did I just happen to get a lemon or is this a function of the computer being too new for third party software?

Programs such as Quickbooks pro for Mac, I was able to import my previous data and I was able to enter about 5 new transactions before it stopped being able to save transactions. Other programs ( Raintree ) that I use via VM software as a windows based program I was able to access and use some features but not others. On the web browsers (both safari and Mozilla) I use a website that has an analyzer feature and it would pull up a blank screen in the place where I would enter pertinent information. They tried pulling this website at the apple store today and the same issue happened. All these programs and website I am able to access and run smoothly with no issues on my husbands MacBook Pro , which is why I returned my MacBook. I just wondered if others were experiencing similar issues with their MacBook with retinal display.

I can't get ahome page that has 6 or 8 tablets of most common used websites. Tried Option "use current pages" without success. Can you help?s

Since having Firefox I have used as a Home page a page with "tablets" showing the most recent pae of my most popular websites. By clicking on this I returned immediately to that site. Suddenly it's disappeared and I can't get it back. I tried "Options Use current pages" but that doesn't work. Help!

You can set the home page to about:newtab to have the page with the 5x3 tiles showing.
You can check the home page setting:
*Tools > Options > General > Startup: Home page
Firefox supports multiple home pages separated by '|' (pipe) symbols.
*https://support.mozilla.org/kb/How+to+set+the+home+page
You can check the value of the <b>browser.newtab.url</b> pref that sets the new tab page page and make sure it is set to about:newtab.
See this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

Website with calculator I'm trying to use says "inactive plug-in".

Similar Messages

Maybe you are looking for