Website wont load at home but does at work!

Hi everyone,
www.buoyweather.com wont load at home but does at my work! I cant figure this one out. It worked fine a week or so ago but since then it fails to load. I dont get an error message, it just sits there trying to load it. The next day at work it works fine. I have tried firefox, chrome, safari etc and still no luck. I havent blocked the website in my preferences either. Every other webssite seems to work fine.
Help!

It definitely sounds like a router issue... especially if both your Mac and your phone can't access the same site when using the same router... but can access it elsewhere. My first thought would have been what JK was suggesting (a DNS issue)... but the direct IP address he provided would have worked if that were the case. The site you're going to isn't that common so it would be a pretty significant coincidence if that site were just randomly blocked for some reason. It seems more likely that the issue is related to the fact that you visit that site. Have you tried resetting your router?

Similar Messages

HT1476 i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won't recharge either via laptop (usually does) or wall switch. Just a blk screen.

i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won’t recharge either via laptop (usually does) or wall switch. Just a blk screen.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

HT1414 my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is d

my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is dead

If it is one year old minus one day it is still under warranty. If it is more than a year since you purchased it then yes, the warranty has expired.
Millions of iPads have been sold. Most continue to function long after their warranty has expired. Check the many requests about updating the iOS on the original iPad on these forums and you'll see that there are many iPads still working after three years. My iPad 2, which I had for over two years is still working well for my son in law who took it over from me when I bought a new one.
Given that there will always be a few iPads that fail early. Most of those will be covered under warranty. But some will fail after the warranty has expired and before the owner expected it to. I'm sorry to hear that you are in this category. Take your iPad to an Apple store and have it looked at. They will provide you with alternatives, one of which is to purchase a like model to the one that failed at a discount. You can then know your options and make the best choice for you.

HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reloading software and reset to original factory settings.

My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?

Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

HT201263 my iphone 4 switched off on 70% battery and now wont switch on? also my home button does not work?please help

My iphone 4 suddenly switched off on 70% battery and now it wont switch back on? my home button does not work either so i can not do the normal reset please help!!

Sophierose21 wrote:
my home button does not work
Then it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first...

Ipad app icons shaking but won't delete, home button does not work, power off switch does not work

I just got a new ipad air and have started to add apps to it. I have added a couple of free apps which I have also deleted (moved to icloud). I have also a couple of apps (free & purchased) which I have on it now.
Now my problem:
I tried to remove another free app. I press and hold the icon. All app icons shake and display the 'x' for removing, but the 'x' for does not work on any of the icons. Also, after this, the home button does not work as the icons keep shaking even while I am pressing the button. And the power off switch on the side of the device does not work either. If I close the smart cover and reopen it shows the home display and all the icons still shaking (instead of showing the passcode sign-in display). Fortunately (well, fortune in the misfortune) if I press the home button and off switch a couple times each and close the smart cover and wait, the device awakes normally. Well, normally until I try to remove any app.
So what do I need to do to fix this?
Thanx
Brian

Glad it worked. Anytime your iPad acts up, the reboot/reset is a common first thing to try. And it clears up many issues and glitches.
enjoy your new toy

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Home Sharing does not work. It's time for Apple to act.

My specific question: Does anyone from Apple read these discussions *and* use the information to fix iTunes?
My issue (and I've given up on this): Home Sharing does not work and it needs to be fixed. I use a Windows 7 based PC and can successfully access my iTunes library from my iPad, meaning all network requirements are met. However many artists and albums do not appear. I know this is not about the tagging/data for the albums.
I found recommendations in these forums regarding the iTunes database (.itl), that this is a sign that the database is corrupted, and how to re-create it from the xml version. I used this technique and it did fix the problem - all albums and artists appeared. But within a day or so, they disappear again, meaning the .itl file is corrupted again and has to be re-created again. Also - if the .itl file is corrupted, then why does everything appear fine in iTunes? Somewhere, somehow the data are good enough to make iTunes work properly.
Bottom line: If you can't get the basics right, then Home Sharing does not work. Some very helpful forum commenters said it could have something to do with the anti-virus software, but that is just passing the buck. I should not have to know how to do all this. I should be able to turn on Home Sharing and enjoy the music from my iPads, iPhone, etc. Imagine you have to know how fuel injection works and be able to fix it every two days just to use your car - you should be able to turn the key and drive.
There are more problems - I won't even get into how the album won't display properly on the iPad and other annoyances.
Apple? Are you listening? Home Sharing does not work. It is the opposite of the image projected of easy-to-use, people-friendly products.
I suggest you either make it work or turn off the feature.
Joe

If your database is constantly becoming corrupt, you have a problem on your computer, it is nothing to do with homesharing. The corrupt database does not affect iTunes because that uses another file. It's not passing the buck, by considering whether anti-virus software might be causing this, this is the sort of stuff anti-virus software does (although I'm not saying that's what it is in your case-I don't know at this stage), you can't hold Apple accountable for badly written software that you have put on your computer yourself.
If you can't correctly identify what is causing your problem, you are never going to fix it.

Updated itunes now home sharing does not work

i updated my itunes from 10.2 to the new 10.3 but now my home sharing does not work. the apple tv can not see the computer..my apple tv has the latest updated software as well. any help would be appreciated.. this seems to be an on going thing with apple lately where updated software causes more hea

Troubleshooting Home Sharing
Troubleshooting Home Sharing with Apple TV (2nd generation)

ITunes 9 Home Sharing does not work on Windows 7 x64

iTunes 9 Home Sharing does not work on Windows 7 x64.
Getting the following error message:
Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
I've just upgraded my iPhone to OS 3.1 using it this morning.
Please advise.
Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
Ivan Farkas
<edited by host>

I am using Windows 7 x64.
I am running iTunes 9.0.2.25
I am running Mcafee.
I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
Message was edited by: turcott

HT4623 My iPhone 4 shut off and will not turn on. My home button does not work. Any suggestions?

My iPhone 4 worked fine last night. When I woke up this morning, it had shut off and will not turn back on. I looked up the HOME+SLEEP key solutions, but my home button does not work. Any suggestions?

Try a reset: Hold down the home button along with the sleep/wake button until you see the apple, then let go.

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upg

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upgrade from? So now I have spent lots $$ and nothing working. Why is this so complicated? what do I need to do?

Hi Rave,
Thanks for this; my issue is that I have now supposedly purchased a retail version of Acrobat X1 (i.e just spent more $$, after the upgrade attempt to Acrobat X1 failed), and while this feigns an OK install, it fails in someway to override the "Upgrade Acrobat X1 version". E.G. once I load up to read an acrobat file the "upgrade version" executes/intercepts and ask for serial numbers and check for a previous qualifying version which I do not have, (BUT what I do have is the current retail version of acrobat X1 which is not recognised)
Do I need to uninstall and start over again? (I am reluctant to do this as I am sure serial number issues will arise, as I assume downloaded file will be cleaned up etc, and I am not spending more money trying again!)
Any suggestions?

HT4113 ipad password is giving me problems, works on wallpaper to unlock but does not work for restrictions or reset

ipad password is giving me problems, works on wallpaper to unlock but does not work on reset or restrictions

You can try to remember or get the passcode somehow. If not, the only other option is to wipe the device clean and restore it to factory settings.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

Phone 4 home button does not work, iPhone 4 home button does not work

Phone 4 home button does not work. I tried to put it off and on, but to no avail. Tried updating, still nothing.

No magic solutions for a hardware problem. You'll need to bring your phone to Apple for replacement ($149), or find a 3rd party to fix your phone (which will forfeit all future support on that phone, warranty or otherwise, from Apple)

Website wont load at home but does at work!

Similar Messages

Maybe you are looking for