Website works on a mac, has problems on a pc

hello - i recently published a website and it looks fine on my mac but is not working on pc's. when the page loads on a pc, the page comes up for a split second how it looks on my mac - but then it snaps back to two main problems:
1. any image on a page will come up with the proper brightness and color and then after a moment will go to a dark version that is hard to read.
2. any font on a page will come up looking as it did when i laid it out, and then after a moment it will wrap and not be centered as i had designed it.
the website does this for each page. then once you go back to that page again it doesnt even show the original design for that split second. it just remembers the way the pc had adjusted it.
any help would be greatly appreciated.
e.

e:
#1 - PCs are generally set to a gamma level of 2.2 which is darker than the Mac standard of 1.8. You can calibrate your monitor to set it at 2.2 and see if that looks anything like what you see on the PC.
#2 - are you using a web safe font?
Web Safe Fonts
Common fonts to all versions of Windows & Mac equivalents
Safe web fonts
Make sure you've upgraded to iWeb 2.0.4, make a minor change to each page and do a Publish All to MobileMe. Try the PC again. As for the darkness, see if other PCs are as dark. What version of IE is on the PC? I hear that IE 7 is more compatible with iWeb sites than previous versions. You can see what your site looks to different browsers at this site: http://browsershots.org/ or this site: http://ipinfo.info/netrenderer/
OT

Similar Messages

  • Turning Power on the Mac Has Problems

    I would like to know if any one has exeperienced this problem where you turn off the power on your Mac and when you go to start it up, the Mac does not start back up. There is no chime, It just hangs there. I had it in the shop for 3 weeks. Apple people replaced the logic board and ram and a procesor. That was not the problem. When I got it back I had the same problems.
    I leave the Mac on for a couple of days and shut it down. Go to turn it back on, no chime, no start u

    I'd suggest you call Apple, politely inform them you've tried their way, it didn't work, and now you'd appreciate it if they would _come to your location_ and do one of the following:
    1) Fix your Mac.
    2) Replace your Mac.
    It's only a phone call, and it might work. You have a very reasonable case to make. New Mac under warranty, serious failure, repair shop couldn't fix it.
    If you do this, please report back and tell us whether Apple agrees.
    Message was edited by: Philbert27

  • One Z10 works fine, the other has problems connecting to mobile network

    Hi, my wife and I both have Z10's, and we're both on the same mobile network (Wind Mobile in Canada). The wife's Z10 seems to have no problems connecting to or staying connected to Wind Mobile. Mine on the other hand seems to randomly drop the connection, or has trouble obtaining connection, and sometimes ends up roaming.
    The only difference between the two Z10's is that hers is purchased through Wind Mobile itself, and it is locked to their network for the moment. I purchased mine a bit later, and I bought mine directly through Blackberry's online store, and mine is therefore unlocked. What I have to do sometimes is turn off the mobile connection, and turn it back on, and it works after I do that. However, that's annoying, as I'd rather have it automatically retry the network connection so that it doesn't go roaming within my own city.
    Solved!
    Go to Solution.

    If you're passing by a Wind store in the near future, why not drop in and ask if they'll swap SIM cards for you? It could be something with the SIM.
    In the meantime, try resetting your phone. This is equivalent to doing a battery pull and it's usually the first thing I recommend when troubleshooting an issue. Simply press and hold your power button for about 15 seconds until you see BlackBerry on your screen. Don't release the button before that and ignore anything that appears before BlackBerry.
    Let us know if either of those solutions helps you.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Why has Safari stopped loading the website managebac? all other websites work but this one has stopped loading.  I have reset safari, deleted cookies etc.  Help!

    We use Managebac at the school where I teach and the website loads with my password and username on another teachers mac.  However, it has stopped loading on mine.  Any ideas?

    sorry not iPad but macbook air

  • Spotlight works once, then Mac has to be rebooted for it to work again

    I have a G5 Dual 1.8GB. This has started happening over the last 3 days.
    Spotlight will do a search, maybe even 2 or 3 searches, but the next search comes up with nothing. The G5 has to be restarted for Spotlight to work.
    Tried the fsck thing...
    I've checked thru 5 of the previous pages and found that Spotlight often doesn't work and that no-one has solved the problems according to the star logo.

    Any symptoms?
    Have you installed, updated, or changed anything in the last four days?
    Have you had any crashes?
    Did you attached anything?
    Is your system clock on time?
    Has your cat stepped on the keyboard?
    As for the last 5 over again. Perhaps read a few more, and even visit a few other forums. Notice how often we tend to check that the "problem was solved." Most often it was more a user problem.

  • Panasonic KX-p7105 printer won't work on new mac - has disk for Mac OS 9.2

    I finally switched to a Mac and am so disappointed that my great laser printer won't work. It prints pages of gibberish. My driver disk is for an older version of mac and won't open. I get a message saying "You can't open the network setup tool because the classic environment is no longer supported." I've since searched the net for drivers and can only find windows versions. Is this hopeless? Should I return my Mac (I'm still within the 14 days and don't want to buy another laser printer).
    Any options?

    Here's what John was talking about:
    http://openprinting.org/show_printer.cgi?recnum=Panasonic-KX-P7105
    You need the 3-part hpijs driver:
    http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs
    (these are standard Mac installers - .dmg disk image files)

  • Without Safari for Windows, how will I be able to ensure my website works on the mac?

    I build website templates and modern web apps for a living and use HTML5 and CSS3 extensively.
    I've experienced that with those new technologies there are often minor differences and bugs between Safari and Chrome altough they both use the Webkit rendering egine.
    The version of the engine not being the same I often find akward behaviours which I also report to apple.
    Now, not having Safari 6 for windows, how am I supposed to develop websites for the mac? This is not just software that is OSX specific, we are talking about websites here. Many new websites might just break in safari.
    Please apple at least bring a dev tool to windows. A Window, an url bar, dev tools and the Safari rendering engine. No need to build something fancy
    Thanks for your suggestions and feedback.

    You can use this form for sending Apple feedback about Safari:
    http://www.apple.com/feedback/safari.html
    "Safari is one of the most standards-compliant browsers ever built. Thus, your best bet for ensuring your pages render properly in Safari — today’s version and beyond — is to follow web standards. For a great overview of web standards, check out Mozilla.org’s article Using Web Standards in Your Web Pages."
    https://developer.mozilla.org/en/Using_Web_Standards_in_your_Web_Pages

  • Will Apple TV work if my Mac has an external hard drive?

    Planning to get a big external hard drive to house all my media.
    Will AppleTV be able to see my iTunes content if all the content is on the external drive?
    Thanks,
    jf

    Absolutely.
    It does not matter where the media is stored so long as itunes can access it.
    External USB/Firewire drives are generally fine with all but the oldest computers.
    Network storage generally also works but does in effect double network traffic so if the network is already stretched speed wise this can give less than optimal performance but one rarely hears of problems in practice.
    AC

  • ICal alarms not working when my mac has been off during time of alarm.

    Surely there is a way to make all the missed alarms go off when I do turn my mac on? Please help!

    To clarify, I set an alarm for 10am.
    My Mac is off all night until 11am when I turn it on. When I do turn it on I do not get the 10am alarm!
    Am using Macbook Pro 15" OS X 10.6.8

  • Will my iWeb website work  June after mobile me has been terminated?

    Will my iWeb website work after mobile me has been terminated in June?

    This may be of help to you: Life After MobileMe.
    OT

  • My imac has problem with HP Photosmart 210a.

    Hello
    I have an I MAc with lion. And i Buyed an HP Photosmart 210a but the software on the CD id not completly with lion only with snow leopard.
    Since this time i put the CD in the MAc my mac has Problems When i Startet Itunes he is running slowly and made e e e e e e e e.
    The Software updater on mac show me every time the same Printer Software Update is For Update Ready, But every time he say it is finisched update but when i make a new search for updates he show me the same update is avaible for install.
    When i Close down the mac and start new is the same problem.
    You know the problem?
    regreads
    Markus

    I've got the same problem on my MacBook Pro with Snow Leopard and Gutenprint 5.2.5 when printing on the 7150 - it prints about 10% (and skewed at that) and spits out the page. This occurs when printing from any app.
    I am only able to print in draft mode which is not suitable for anything I need to do.
    I realize this printer is no longer officially supported, but any help would be appreciated!
    Thanks,
    Mike.

  • I'm working with a Mac, with 10.10.2 system.  My Audition program has been working fine for years now.  But, there is a problem I can't solve.  All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio

    I'm working with a Mac, with 10.10.2 system.  My Audition program has been working fine for years now.  But, there is a problem I can't solve.  All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio reaches the one hour point.  From there on, the left click will not give me the drop down menu in order to copy and then paste into an Excel sheet I then have to submit for the proofing purposes.  After the one hour mark, I can only control/c in order to highlight, then when I slide up to my Excel sheet, I'm able to right click and paste.  Why is the program not, all of a su allowing me to left cllick the mouse and have a drop down menu give me the option to "copy, " as it does for any time signature markers up to 1:00:00.000?

    Which version of Audition? With the latest version of Audition running on a Windows 7 machine I can't get a dropdown menu at all when I left click on the time in Markers List. The only way to do it is with cntrl-c.

  • HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    Have you tried calling Apple tech support?
    http://www.apple.com/contact/

  • I have a MacBook Air which has a camera installed in it but it doesn't seem to work for some things like iMovie and my security camera for emergencies. It does however seem to work for Photobooth and facetime. Please write back and help my mac's problems.

    It'd be nice if you could help me with my mac's problems so I can start using iMovie and my security camera again. Thank you too all that answer.
    --JaySwanny

    User Password Reset

  • Why does this websites not work on our Mac products?

    http://www.gordonbennett2012.ch/
    We are working on the above website: We cannot get it to work on the following Mac devises. Would you please advise the reason for this and how we can fix it?
    From: FLY GAS
    Subject: Fwd: Website of Gordon Bennett 2012  
    Date: August 11, 2012 1:52:22 PM MDT
    To: René Louis  Cc: Mark Sullivan
    Hello René,   Thank you very much for your email. I am happy to work with you. I have been working on this all day. I still have not figured out why this is not working. I am Mark Sullivan and Cheri White's Crew Chief/Technical Support for the USA.
    The following products are being used:
    MacBook Pro,Mac OS X Version 10.7.4, Processor 2.8 GHz Intel Core 2 Duo
    Mac iPad, Version 5.1.1 (9B206)
    Non of these prodects will upload your site    http://www.gordonbennett2012.ch/
    I have tried the following browsers:
    Opera: Could not connect to remote server,
    Safari: no responce
    Firefox: The connection has timed out                                                                The server at gordonbennett2012.ch is taking too long to respond.
    Google Chrome: Oops! Google Chrome could not connect to www.gordonbennett2012.ch
    I have had all our crew do the same. They are in different parts of the USA.
    And the response has been the following:
    North Carolina on PC and Android: Site uploaded
    New Mexico on PC and iPhone: Site did not upload on either
    New Mexico on PC and iPhone: Site did upload
    I have also contacted Mac. Please let me know your thoughts so we can sort this out.  In the past I have been able to get your site. Just in the past month I have not been able to. I am getting a timed out error from ALL the above browsers.
    Kind regards,  Letitia
    Ms. Letitia Hill
    TEAM USA/FLY GAS
    PO Box 7186
    Albuquerque, New Mexico 87194 USA
    TEL: 505-270-6759
    FAX: 505-503-8430
    E-Mail: [email protected]
    Website: www.flygas.net
    Begin forwarded message:
    From: René Louis 
    Subject: Website of Gordon Bennett 2012 Date: August 11, 2012 1:25:13 PM MDT
    To: [email protected]
    Dear Letitia  Thank you very much for your message about our website.
    I am also working with a Mac and could not find any problems.  I would be very interested to know which products you are using and what is not working so I could have a detailed look at it.
    Thank you very much.
    Best Regards
    René
    Gordon Bennett 2012 Secretariat / Postfach 280 / CH-9650 Nesslau / Switzerland www.gordonbennett2012.ch  René Louis / Kirchweg 672 / CH-9650 Nesslau / Switzerland

    There seems to be a block with the Internet server in the United States as other Internet and cell servers i.e. Verizon and Century-Link DSL work with Mac, Andriod and PC. It just seems to be Mac on Comcast that is not...
    Without more data I'm inclined to say it's more likely to be Comcast itself, rather than 'Macs on Comcast'.
    For example, do other devices (PCs, Android, iOS) on that Comcast network also have problems connecting? or do they connect fine?
    I'd expect that any device at that network has a problem, which indicates a problem with Comcast. It might be their DNS not resolving properly, or them not routing data correctly, but that should be your focus.
    Perform a DNS lookup on the www.gordonbennett2012.ch hostname. What result do you get? Is it the expected address?
    If that returns the right address, what do you get with a traceroute?
    That will test the routing befween your system and the server, and may indicate other problems on the network.

Maybe you are looking for

  • HELP! On PC reboot all my extensions get disabled and each one opens a new Tab!

    Help!!! On PC reboot all my extensions get disabled and each one opens a new Tab! I have seen 2 threads here about this issue and a few more by googling the problem. However nothing, nothing, noithing... worked! Win7, MS Office 2007, Sony Vaio SZ1VP,

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

  • FCP 7.0.3 Import window closes itself before I can select anything

    I just reinstalled FCS on my mac book pro and updated it to FCP 7.0.3. I am running Yosemite. When I select file>import the dialogue pops up but before I can click on anything or make a selection it closes. Anyone else see this behavior? What might b

  • What STP protocol to use?

    Guys I have recently taken over the management of a small LAN made up of 13 switches 10 Cisco and 2 Nortel switches. The network is made up of a stack of 3750E-48 Port switches (x4), 3560E-48 Port (x2), 2960G-48 (x3), 3550E-48 (x1)and 2912XL-12 (x1).

  • Gantt Chart

    Hello!! I need to do a Gantt Chart in Excelsius, if someone could help me with this, I'd really appreciate it!! I saw the post of Alex Yale but I need more information of how to do when you've got dates, as in a Project Gantt Chart. Thanks in advance