Websites read my macbook pro as a mobile device. How do I fix this?

This has been going on for as long as I've had my Macbook Pro (May 2011)--AND since before I recently updated my operating system to Mavericks from Snow Leopard. It's getting really annoying. It used to be that just the MGM Resorts properties in Las Vegas read my laptop as a mobile device, but now other websites are starting to do so as well. How do I make these websites understand that I'm using a laptop and want to view their full websites, not the mobile version?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Similar Messages

Safari 6.1.1 (7537.73.11) keeps freezing up on my macbook pro OS 10.7.5, how do I fix this?

Safari 6.1.1 (7537.73.11) keeps freezing up on my macbook pro 2.4 ghz OS 10.7.5 (11g63), how do I fix this?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My Macbook Pro slow on startup. How can I fix this?

Hello,
My macbook pro is slow on start up. Today I had to shut the computer down using the power button TWO TIMES IN A ROW. On the third time, the computer executed the start up correctly. What could be the cause of this? How do I fix it?
saxman81

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the times of the log messages referring to boot times. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search that archived log, and if necessary the older ones below it, for the same information.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Do the same with kernel.log.
Step 3
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
It constantly gets harder.

My MacBook Pro is running really slow - how can I fix it?

my MacBook Pro is running really slow - how can I fix it?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

When I insert the usb of my Elgato Video Capture into my Macbook Pro, it says 'USB Devices Disabled'? What does this mean and how can I solve it?

When I insert the usb of my Elgato Video Capture into my Macbook Pro, it says 'USB Devices Disabled'? What does this mean and how can I solve it?
I've partitoned Windows swell and it says the same thing? I'm trying to live capture from my Sony Camcorder through Elgato but I just get the above message?

This means that the backups were made with a later version than the version currently on the phone. You will have to update the phone to 6.1.3 to be able to restore the backup. You can restore a backup made with an earlier version, but not with a later version.

HT3986 when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

Use InputRemapper
This is one or only utility I know, there are I am sure one or two others.
And the weakest link in running Windows on Mac: lack of thermal/SMC fan control to manage air flow and heat!

Since downloading Maverick iCal no longer syncs between my MacBook Pro, my iMac or iPad - how do I rectify this?

since downloading Maverick iCal no longer syncs between my MacBook Pro, my iMac or iPad - how do I rectify this? (my first post ever)

I know Pete, but what if I don't have good internet connection sometimes?
Imagine:
this morning planning the whole next week with my iMac, bussiness around Europe.
I must go this evening.
Just now internet line fails in the neighborhood.
Stupid situation, and not so uncommon, cause not all of us are living in Manhattan. (this is what Apple thinks)
Cable must be an option beside iCloud.
true or not?

Since I installed Lion my macbook pro keeps locking up. How can I fix it?

Since I installed Lion my macbook pro keeps locking up. How can I fix it?

Well you can #18 install Lion over itself and hope that fixes it
Step by Step to fix your Mac
You can revert back to Snow Leopard
How to revert your Mac to Snow Leopard
You can go through this list and attempt to fix your problem, but likely wind up going back to Snow Leopard.
Step by Step to fix your Mac

Ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

1. Did you use Bootcamp Assistant?
2. Did you build a USB with Windows 7 ISO and Bootcamp drivers?
3. You should use a USB2.0 disk, not a USB3.0 disk (flash drive).
4. What year is the Retina MBP?

HT5730 my trackpad and keyboard on my macbook air will not connect.. how can i fix this without having to drive 2 hours to an apple store.

my trackpad and keyboard on my macbook air will not connect.. how can i fix this without having to drive 2 hours to an apple store

i also have an external mouse and keyboard hooked up to it.. future shop suggested resetting the macbook. but i cant figure out how to do that.

HT1414 Why do I get 'This message has no content' with some e-mails on my iPad when the same messages can be received on my MacBook Pro without any problem, and how can I fix it?

Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?

Is this a POP (POP3) email account? If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can. Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.

Why did my iMessage on my Macbook Pro randomly stop working? How can I fix it?

The iMessage on my Macbook randomly stopped sending and recieving messages 3 days ago. I tried signing out and signing back in and then it showed all my contacts offline. It also keeps saying Bonjour but I have Bonjour turned off. How can I fix this?

Solution may be found if you search in the "More Like This" section over in the right column.

When I remove all website data under settings safari advanced website data, it comes back a day later. How do I fix this?, When I remove all website data under settings safari advanced website data, it comes back a day later. How do I fix this?

When I remove all website data under settings>safari>advanced>website data (remove all), the websites reappear when i check a day later. How do I stop this?

HI,
Wow you must have been watching me type and hit send since it took about 1 minute for the reply. Thanks.
Yes i understand the purpose however i still feel as though i should be able to decide for myself if i want to use them as an "option" or turn them off entirely. It's sort of akin to the "trash bin" that's not really trash, though in that instance at least microsoft and Apple listened to consumers (eventally) and allowed users to make the choice. Hey there's a thought how about Apple points the delete to the trash bin and looses the annoying popup, that way we can restore cookies? Sorry, i'm being sarcastic but in my view, if i delete a cookie or a cached web icon it's not exactly the same thing as "saving us" from deleting a spreadsheet or system files. Oh but wait in that instance i CAN delete them without having to endure the annoying "are you sure" pop up. it looks like someone missed the bus on this one. Thanks again I'll check the web for the terminal command and try and edit the tag myself.

Websites read my macbook pro as a mobile device. How do I fix this?

Similar Messages

Maybe you are looking for