Websites show white screen when visited

When I visit some websites, I see just a white screen with nothing on it - No text, no images, no spot nothing - just white.
Please note that I have tried the following things and none has worked for me.
1) I have reset Firefox - But no changes.
2) I have started Firefox with add-ons disabled - But no changes.
3) I have cleared the cookies for the websites - But no changes.
Even a few days back, everything was ok. But don't know what happens now. My Antivirus Kaspersky could not solve the problem. I have also used Malwarebytes ( Free Version ) to scan my computer. No malware was found.
Please help. What to do ?

Since you are having difficulties accessing those sites from other
browsers also this problem is not related to Firefox. The problem
lies either in your pc or in your internet connection.
I have faced this same issue before several times. I had to
contact top-level ISP personnels as guys who work at customer
support were too lazy and the problem was too complicated
to them. I suggest you do the same.

Similar Messages

  • HT1414 My ipod touch shows white screen when i turn on. And, it does not register in my computer.

    My Ipod touch don't start up as usual. It doesn't register to my PC. It shows white screen and some time other colors like green and blue. I trying restarting, but that did not work. I cannot restore the IOS because my Ipod touch doesn't even shows up in my Computer.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

    I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
    Very frustrating, hope someone else has some ideas!
    PS My MacBook was about same age, and "expired" in exactly the same way as yours.

  • What is missing when I get a blank white screen when I try to Access some web sites?

    On some web sites, I get a blank white screen when I try to access them.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I have a bright white screen when turning on my ipod nano 7th gen.  Have tried resetting etc etc. Any further ideas?

    I have a bright white screen when turning on my nano 7th gen. Have tried resetting and restoring settings - no change. Any ideas please?

    Hello pipworms,
    I would be concerned too if my iPod nano's was just showing a white screen.  I recommend following the steps below:
    Display shows a white screen
    Try putting the iPod into disk mode:
    Reset the device (Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds).
    When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    I got this information from the following article for the 6th generation iPod nano.  The steps are the same, except I updated the reset steps with the reset for the 7th generation iPod nano:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Putting iPod into Disk Mode
    http://support.apple.com/kb/HT1363
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My iphone 3gs shows white screen i restored it in itunes then to same problem once i connect my phone to charge i can hear the sound and if i put for silent mode i can fell the vibration so what the problem in my phone

    my iphone 3gs shows white screen i restored it in itunes then to same problem once i connect my phone to charge i can hear the sound and if i put for silent mode i can fell the vibration so what the problem in my phone

    Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it

  • W550i showing white screen plz help

    My w550i  is showing white screen .i have taken it to a technician.he says it is a software problem it is hanged.plz anyone provide me necessary software to repair it

    According to the SE website, the W550i no longer supports the update service, so you will need to contact your local service centre to get it repaired.

  • My Mac Book Pro only show white screen

    When I restart my PC.  It only show white screen.  It cannot go on.  What should I do?

    Hello hugh betcha1,
    The following article provdies some useful troubleshooting steps that may be helpful in getting your Mac to boot.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Cheers,
    Allen

  • Zen 4GB... Flashing white screen when powered o

    I was wondering if anyone has encountered this problem.
    My new Zen... since the day I received it, flashes a white screen when it is just sitting there on my desk. It turns on then off real quick randomly... I notice it because I keep it at my computer desk... it happens at random, I actually see it happen maybe to 4 times a day. It does it on 4 different firmwares including the newest firmware. I was hoping the next one may fix it but it does seem more logical that this is a hardware issue. It works perfectly whiled turned on... but it seems possessed by turning on by itself and I am thinking of returning it before it turns into a bigger problem. I'm assuming bad wiring... maybe just with mine...
    Don't let this discourage you though... it is a great mp3 player.

    Yes, i have that flashing screen, too. It?s so very annoying ...
    With the stock firmware, the .03, I have only problem, the hold-mode.
    If I turn hold-mode on, the display shuts down, quite normal.
    If I turn hold-mode off, the display shows only a white screen, nothing else,
    music keeps running and I can push keys, but i can't see anything ...

  • Temporary white screen when home button is pushed.

    My ipod touch only shows a white screen when buttons are pushed (I can't see any apps or icons). I tried turning it off, and then I restored it. The screen will be off and then when I push the home button it shows a white screen and will eventually fade back out after... Help?!

    akjennydog wrote:
    If I RESTORE the iTouch will it delete photos and music?
    Yes a Restore will do that...
    Your Photos and Music should be on the Computer you usually Sync with...
    The iPhone is Not a storage device...
    iPhone User Guide

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

    I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

    You would get better response from the iTunes community forum.
    Have a nice day!

  • Hello all,     I have a 6G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the cl

    Hello all,
    I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
    What I have tried so far to no avail:
    Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
    Tried this: iPod nano (6th generation): Hardware troubleshooting
    Changed the watch face to display.
    Recharged the device overnight (without full discharge).
    Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
    Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
    Regards,

    Hey,
    I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
    Have you found any solution?
    Bah, this is annoying.
    //Gubbar

  • HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

    I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

    Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
    I hope I helped
    thanks
    Lydia

  • My macbook pro shows blank screen when I started..help me..

    My macbook pro shows blank screen when I started . (It's like in same state when power off. ) fan sound and hard disk is running. So i connected it Through external monitor via mini display to VGA cable. I can see everything on external monitor. My display of Mac needs to change? How much it cost ?? I found so many forum discussion said that if nvedia card is faulty then its happen...let me know suggestions...I given it to apple care service station n they r telling yr display needs to change its cost me a lot.. I can't afford. And can't spend that much for 3 yr old version as new versions of macbook pro is cost vice reasonable.. can I have any suggestion?

    If running 10.7 or later hold down Command-R at Startup.
    This should invoke recovery Mode.
    Choose Disk Utility.
    Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
    Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
    If errors, run again until it comes clean or gets stuck.
    Report any error messages.

Maybe you are looking for

  • While updating a table i am getting ORA-00600 error.

    Hi all, While updating a table i am getting the following: **SQL Error: ORA-00600: internal error code, arguments: [qkebCreateConstantOpn1], [], [], [], [], [], [], [], [], [], [], []** **00600. 00000 - "internal error code, arguments: [%s], [%s], [%

  • Delivery Report - Pending (Internal)

    We're having an issue where users that are members of various distribution groups are not reliably receiving messages. We have a newsletter that is sent out weekly by one user. They use 4 internal distribution groups (some of them nested) plus extern

  • Use of hp Photosmart Premium Fax e-All-In-One C410 Series Printer On Second Computer

    I have recently purchased new hp Pavilion dv5 laptop and photosmart C410 printer.  Have loaded printer software onto computer and it works fine.  Both of these are running in a wireless network.  I would like to hook a second laptop that is running V

  • How do I convert a .EPS file into a .SHP file (Shapefile)?

    Hello all, I have an .EPS file of custom regions that I need to convert to a .SHP file for a map in Mapbox.  Is this possible?  If so, how?  Any help you can provide will be much appreciated.  Thank you.

  • Installing Oracle Virtual Directory Manager client on Solaris 10

    Hi, While installing Oracle Virtual Directory Client on solaris 10, I am getting "ovidm1014.bin : /tmp/install.dir.<number>/linux/resource/jre/bin/java: cannot execute" error while initiating the installer. Can someone look into the message and advic