Websites which have files with filenames including an underscore do not display correctly.

HTML files with Image files with an underscore in their name don't display the image files. They do display under Konqueror. Firefox displays the image files OK if you type their URL into the control bar. The URL below provides an example, and look e.g at the file. CEOHT_16months.jpg
Thank you.

No problems here with the images.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Similar Messages

  • How do you update the song/artist information on songs that you have loaded to the cloud.  Some are not displaying correctly on my Iphone.

    I have loaded all my music to the cloud from my hard drive.  When I am viewing the music on my PC from the cloud it wasn't displaying all of the song/artist information correctly.  I took the time to go into each one that wasn't displaying correctly using the "get info" option and I updated them all.  Now they are displaying properly on my PC but not on my Iphone.  I'm sure it was because of the way they were loaded.  My question is how do I update the information for the music that is on the cloud so it will display to my Iphone correctly (and the Ipad I just bought but haven't setup yet?

    Pretty sure I just downloaded the .exe files to the SD card (I have a directory called "drivers" there & ran from Windows, no need to boot from anything else. Didn't even need to use Safe Boot. The files do need an .exe extension IE someimes downloads as _exe. No idea why but would just need to rename if download has the underscore and not the period. The you can run them.
    Was so easy I really did not think about it. One of the Intel Platform drives does say "requires 1.60 update" so that is the one you need. Do the 1.60, reboot, and then the Intel update.
    Key point is the release note on the Intel Platform Installer
    "Release Notes
    1.Please install the  Windows BIOS version 1.60 or higher for Encore WT8-A (PDW09x) before installing this Intel Platform Installer update." note this says "BIOS" and not "USB BIOS" which is a smaller file.

  • Reports with output to excel - special characters not displayed correctly.

    Hi,
    I have a portal with data from 5 continents. In many places special or national characters are used in names. My portal can show most of these characters correctly and so can my version of Microsoft Office Excel. When text with these characters are copy/pasted from the screen to an excel sheet, they are also shown correctly in excel. The problem arises in portal reports, where output is set to Excel, then special characters are often displayed as strange double characters, for example á is shown as á . Does anybody have a solution to that?
    Thanks
    Arne

    No answers have been posted yet and now I have found a solution myself. The portal report is run and output set to Excel. The resulting file is opened, and a new row is inserted in the top of the sheet. In the first field in this row is written the characters *\xEF\xBB\xBF*. It is called a UTF-8 BOM, and when written in the start of a text file, it will tell the program that opens it, that UTF-8 encoding is used.<br><br>
    The file is saved with the file type CSV (semicolon separated) (*.csv) and excel is closed. When you click on the CSV-file, it is opened by excel, and now all characters with accents, circumflexes and umlauts are shown correctly.<br><br>
    The solution was found here: http://www.roosmaa.net/importing-utf-8-csvs-in-excel/

  • Files converted from m4a to mp3 are not displaying correctly in feed

    hi; i recently produced my first show in garageband (after using a bunch of other audio apps in the past), exported to an m4a file, and converted to mp3 in itunes, but it is not showing up as an audio file in my feed.
    the feed is http://feeds.feedburner.com/wellroundedradio and my blog posting on it is http://wellroundedmedia.blogspot.com
    is there something you need to do when converting from m4a to mp3 in itunes to make sure the settings are all correct so it will be enclosed as an audio file? i have tested other mp3 files in the feed and they are working fine.
    thx, charlie
    ==
    charles mcenerney
    host + producer
    well-rounded radio
    http://www.wellroundedradio.net
    iBook G4   Mac OS X (10.4.8)  

    greg-
    thanks. yes, i think that's what has been so tricky about this. i add a link to an mp3 in blogger, but feedburner doesn't add this particular show as an enclosure, so it's not updating in the feed. can't seem to find where the origin of the problem, though...is it blogger, feedburner, or the mp3 file or...?
    charlie

  • The website takes a long time to lod and it does not display correctly the layout is expanded.

    When i try to load the website it takes a long time to load and when it does the layout is expanded and no images appear. The site has the same problems with IE and chrome. I did recently use Reginout.

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    Did you check the Accessibility settings in Windows?
    *http://windows.microsoft.com/en-US/Windows7/Make-the-computer-easier-to-see-optimize-visual-display
    *http://windows.microsoft.com/en-US/windows7/Getting-the-best-display-on-your-monitor

  • How to fix the firefox buttons not displaying correctly (i.e. the "save file" button when trying to install an add on)?

    For example, the button for "save file" when downloading an add-on does not display correctly. It works nevertheless, but the button itself is not showing up correctly.
    *edit: sp errors*

    It looks that you have made changes to the appearance of button that cause items and text to be larger.
    In your case this doesn't seem to work properly with the consequence that the middle part of the button gets distorted.
    I'm curious if this artifact would move to the other (Cancel) button or disappear if you would use the Tab key or cursor key to set focus to the Cancel button or if it is a problem with the label text that isn't default (OK or similar).

  • I have to open website which opens only with google but not from safari. how can i get such google?

    i have a website which opens only with google, but not google from safari. how i can get google w/o using safari?

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • Batchloader file with en dash characters in metadata not loading

    I'm trying to batch load metadata which has en dash characters (long hyphens) in the data.
    After I have loaded the batch file the en dash characters are not displayed correctly in UCM.
    I have manually added metadata which includes the en dash character using the UCM checkin page and it works fine.
    I have tried escaping the character in the batchloader file but it didnt work, I tried using \&#150;
    Is there anything else I could try?
    Thanks.

    Try one of options available here: http://www.fileformat.info/info/unicode/char/2013/index.htm

  • RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

    Hi,
    I am using JDEV 11.1.2.1.0
    I am getting the following error :-
    <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
    Piece of code is for region is:-
       <f:facet name="second">
                                                <af:panelStretchLayout id="pa1"
                                                                       binding="#{backingBeanScope.Assign.pa1}">
                                                    <f:facet name="center">
                                                        <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                                   binding="#{backingBeanScope.Assign.r1}"/>
                                                    </f:facet>
                                                </af:panelStretchLayout>
                                            </f:facet>
    How do I resolve it ?
    Thanks,

    Hi,
    I see at least 3 errors
    1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
    the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
    2. SAPFunction.jspx/.xml" has an invalid character ".".
    check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
    3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
    "pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
    Frank

  • I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    What brand/model USB drive? Is it bus or AC powered?
    On Mail...
    First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist

  • When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

    When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
    i am on a Windows 7 professional PC, 64-bit.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • I have files that will open in Quicktime, but not itunes. Anyone that can help me, please

    I have files that will open in Quicktime, but not itunes. Anyone that can help, please?

    run the MP3's by MP3 Validator and see what happens.

  • I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me?, I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me? Thanks...

    I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me?, I have problem with my ipad3. I could not downgrade for ios 6.0.1 to 5.1.1. It was alarm code 3194. can u help me? Thanks...

    Apple does not support downgrading iOS levels.

  • I have problem with the app purchase. I put the correct information credit card but the system said that is incorrect

    I have problem with the app purchase. I put the correct information credit card but the system said that is incorrect

    Use this for help from iTunes https://expresslane.apple.com/GetproductgroupList.action. This is where you need to get assistance.

  • Problems with Turkish characters not displaying correctly

    A user is having problems with certain Turkish characters in particular fonts not displaying correctly (as shown below).
    The two fonts (Gill Sans and Helvetica LT CondensedLight) are used for English language marketing material.  Ideally, for continuity, the same font would be preferred for our Turkish language marketing material rather than changing it to a similar font.
    Helvetica LT CondensedLight
    Turkish character “ İ ” does not display correctly in either Word or InDesign.
    Gill Sans
    Turkish characters “ ş ” and “ ğ ” display correctly in Word but not InDesign.
    My questions are:
    1. For Gill Sans, why are the characters not displaying in InDesign but are in Word?
    2. I've noticed here: http://www.webtype.com/font/gill-sans-family/#glyphs-tab that the required characters are available within the Gill Sans font.  Is this because the font is newer and includes the additional characters?  Would this work in InDesign?

    One of the big differences between InDesign and Word is that Word will happily substitute glyphs without telling you. So, unless your installs of Word and of InDesign are using different versions of Gill Sans (which is possible, BTW) then your s-with-cedilla and your g-with-macron are actually not in Gill Sans but in some other font. I'm guessing Arial.
    It's possible that you have more than one Gill Sans installed (e.g. one in your Document Fonts folder and another in your system fonts folder) that have different glyph complements. Gill Sans has been around a long time, and the version I have from the 90s has no Turkish support whatsoever.
    As far as the capital-I-with-dot, you can check your glyph coverage in a variety of ways. In both InDesign and Word, you can open up a window that shows you all of the glyphs in a font. In InDesign, find it in Type -> Glyphs. In Word, it's called "Insert Symbol" and you can find it in Word 2010 by going to Insert -> Symbol -> More Symbols. I am guessing that the answer to this question is simply that your cut of Helvetica LT has no cap-I-with-dot. You'd need to pick a font that actually has support for Turkish. On WIndows, I use a very full-featured freebie called BabelMap to check font coverage. They have a Web version here:
    http://www.babelstone.co.uk/Unicode/babelmap.html
    but I personally prefer the downloadable .exe file.

Maybe you are looking for