Websphere connect to business object server

how configure business object server ?
special:
in Central Management Console,
BusinessObjects Web Intelligence  configer  and Preferences set.

Business object - are you talking about crystal (now part of business objects) if yes to connect you need to buy business objects integration kit for SAP from them
Raja

Similar Messages

  • Can SQL Server (2008 R2/2012) Integration Services connect to Business Objects / Hyperion directly?

    Hi,
    I have a situation where I need to pull data from Business Objects and
    Hyperion using
    SSIS (2008 R2/2012). I did some pro-active research on how to go about implementing this on a couple of Forums and could only figure out the below solution.
    We can create an ODBC DSN / connection for Business Objects and that can be used by SSIS as a connection manager to directly link to the Business
    Objects Universe. (http://www.forumtopics.com/busobj/viewtopic.php?p=622922&sid=fbb54541e1daacf9714a5672b5ed1314) 
    Question 1 - Has anyone tried to implement this in past? Is this possible directly or can be achieved through some workarounds? sharing inputs/experience on this will be highly appreciated!  
    Question 2 - If this possible in any way , how to get this thing set-up in an environment where SSIS and BO are residing on two different domains/networks. Any way to establish a connection from SSIS
    to the BO instance/server?
    Would really appreciate if anyone can help me out with this issue.
    Thanks
    Akshat

    Hi,
    I have a situation where I need to pull data from Business Objects and
    Hyperion using
    SSIS (2008 R2/2012). I did some pro-active research on how to go about implementing this on a couple of Forums and could only figure out the below solution.
    We can create an ODBC DSN / connection for Business Objects and that can be used by SSIS as a connection manager to directly link to the Business
    Objects Universe. (http://www.forumtopics.com/busobj/viewtopic.php?p=622922&sid=fbb54541e1daacf9714a5672b5ed1314) 
    Question 1 - Has anyone tried to implement this in past? Is this possible directly or can be achieved through some workarounds? sharing inputs/experience on this will be highly appreciated!  
    Question 2 - If this is possible in any way , how to get this thing set-up in an environment where SSIS and BO are residing on two different domains/networks. Any way to establish a connection from
    SSIS to the BO instance/server? (To be precise - If SSIS is hosted on a Cloud environment..?)
    Would really appreciate if anyone can help me out with this issue.
    Thanks
    Akshat

  • Running XI and 6.5 Services on same Business Objects Server

    We are currently thinking about  migrating to Business Objects XI from 6.5 SP4.
    We are running with a 3-tier architecture, with the Business Objects services running on a Windows Server.
    Due to the number of users and reports in circulation we would like to do the migration in phases.
    Is it possible to run both the XI and 6.5 services on the same Business Objects server at the same time?

    That's actually a migration secanario so it should work fine. I had no trouble with 5.2 and 6.0 on the same system.
    Tom

  • Report works in Designer client, but not after published to Business Objects server

    Has this happened to anyone else?  I have a couple of reports that work perfectly on my pc in the Designer client.  I can export them to whatever format I need, and they work.  When I save them to the Business Objects server, everything appears to be ok.  The thumbnail on the properties tab shows the correct report with a page full of data.  When I preview and when I schedule the report to run, I get incorrect data.  In one case, I get an empty report.  In another case, I get data, just wrong data and way too much of it.  I've got hundreds of other reports that were developed and published the same way that are working correctly.  Any ideas?  Thanks in advance!

    There may be couple of reasons. What is your data source? Verify the database in the report and check it again. Or to do more crosschecking, Create a simple report using the same database and deploy in BOE.

  • Use a dynamic list of email addresses to email a report via Business Objects Server 11

    Post Author: wolfgang666
    CA Forum: General
    I use Business Objects Server version 11 to distribute reports via email but was asked if there was a way to only send the reports to those people listed in the report (which changes daily) instead of the entire distribution list. I can create a list of email addresses as a variable within the report but can't find any way to pass it to the Business Objects server "To:" field located in the destination screen. I would expect to see some option for sending to some value located in the report but alas no such option is evident. This seems like a feature the product should be capable of doing as it is so basic. Any other way to do this that anybody can think of? Any help is greatly appreciated. Thanks.
    Matt Frazier

    Hi Alan,
    The simplest thing would be to simply use the Import Wizard to create a BIAR file and then back up the required CR's and instances to the BIAR file. So for instance you would use the "Import Folders and Objects" option. So the source system would be the system you are decomissioning and the Destination would be the BIAR file. Once that is done you can use the BIAR file to import the report content into another system in the future.
    <<Text removed>>
    Kind regards,
    John
    Edited by: Matt on Oct 10, 2011 10:20 AM

  • Cons of installing installing IIS on Business Objects server

    Hello Everyone,
    Kindly help me with a doubt, how Business Objects server is going to be affected if we will install IIS in it. Cause I have another WCF application and have to host on the same server for which I need IIS to be installed.
    Thank you for your time and patience!
    Soubhagya Kumar

    There is a .NET version of InfoView/BI Launchpad and the CMC that you would have to install after installing IIS.  However, they are missing some functionality that your users may want/need - in particular in the Webi application.  I know that at a former employer, I had to move off of our initial install on IIS to Tomcat because users couldn't run the Java versions of the Webi viewer and designer, so they couldn't get to some of the more complex analysis tools in their reports.
    I did a quick search but was unable to find the specifics on this.  Hopefully someone from SAP will check this thread and provide a link to some sort of comparison document.  There is a mention that the comparison between the HTML viewer/designer and the Java applet will be published soon (as of last November) here http://scn.sap.com/community/businessobjects-web-intelligence/blog/2012/11/06/webi-influence-council-qa-and-presentation-from-teched-las-vegas.
    -Dell

  • Demo version for SAP Business object server

    I would like to try the Business object server to work with Crystal reports. could you please let me know the download link for the latest available version of the BO Server/Web Intelligence /Dekstop Intelligence. Is there any demo version available for me?

    Hi,
    Crystal reports u can get it for demo  but Bo Server, webi u cannot u need to install it or the other thing u can do is to take a remote access form somewhere(on monthly basis at a  minimal cost ) and try playing around .

  • HELP: Business Objects server flag

    Morning,
      I was wondering if it is possible to create a flag on the business object server side that will allow scheduled users reports to start (execute) after certain cube loads are complete? Any advice or info are greatly appreciated!
    Thanks,
         Thomas

    Thomas ,
    yes its called event  based scheduling. u create events in CMC to achieve this. Typically after ur loads are done they have to generate a file which sits in a folder in the server. your events in bobj shoould moniter the file creation and then kicks of the schedules. Usually there wud be dedicated event servers for bobj. talk to your admin in these lines.
    Thanks,
    Karthik

  • Connect two Business Object (BUS2038 and BUS0010) in Workflow!

    Hi experts!
    I have a Workflow based in BUS2038 (Maintenance Notification), I can see attributes like Functional Location (code).
    My problem is, i can´t put Functional Location (Description) that is an attribute in BUS0010 (Functional Location) with an input Functional Location (code).
    BUS2038
    Input: Notification number
    Output: Functional Location (code) (attribute)
    BUS0010
    Input: Functional Location (code)
    Output: Functional Location (description) (attribute)
    I want put Functional Location (description) in a mail step.
    How I can achieve this?
    Thank in advance

    Thank you Rick Bakker, I implemented this BUS0010 in BUS2038 (and delegate) but when I was testing, the link between two business objects is <nothing>. Do you need any program for connect both Business Objects?
    Thank in advance!

  • Connecting to Business Objects

    I am running Crystal Reports xi R2 Standard. My knowledge of Business Objects is limited. I have recently had Business Objects installed and now wish to connect to the Universe.  However, there is no selection in database expert in Crystal to connect to the Universe.  Firstly I thought I was running the wrong Crystal SP but after upgrading to SP6 there is no difference.  I do not find any reference to similar problems any where on the net.  I am able to open existing rom the Universe by browsing there, but I cannot run them as I get an error "The Database Connector 'crdb_universe.dll' could not be found"
    Am I running the correct version of Crystal Reports to connect to a Universe running on MY SQL, but connecting to a CA MDB Database running on SQL2005?  Are there any client-side ODBC settings that need to be in place?  If so, what driver should be used and where should they be pointed?  What else can I try?  I have seen references to a fix (ADAPT01038498), but I assumed this would be included in SP6.

    Hi Garth,
    Is the BOE server XI R2 also? If not that would be one problem, they must both be the same version and try to use the same patch level. Second, there is a Client install on the BOE CD, run it on your PC where you have CR installed. Then you may have to do a repair install of CR so it will find all of the drivers. Use the Custom Option and select the database drivers. I don't recall if Universe was an option now. If not then the client install should install it for you. Then when you go to the database Wizard you should see Enterprise or Repository as an option.
    Thank you
    Don

  • Connection with Business Objects Credential Mapping

    Hello,
    We are on BOXI 3.1 SP2. We have a SQL Server 2005 database - which recognizes our Windows AD accounts and allows us access based on that.
    I am trying to create a Universe connection that can use Business Objects Credential Mapping, so that users can use their AD account to access data. However the login always fails.
    Can you please let me know if I am missing any steps here? We normally use SQL server accounts for connection , but we are trying to integrate and use AD security.
    Thanks a lot.

    When you are using BO Credential mapping in universe connection, you have to set the database userid and password in the user settings in CMC. Have you done that ?
    Also make sure that while configuring AD authentication in CMC, you have not selected any option to update users' data source credentials at log on time.

  • SAP Log on into Business Objects server not working (Error FWB 00014)

    Hello,
    I recently installed Business Objects XI 3.1 Edge series, I am able to logon to enterprise and everything is working fine. I am even able to import roles from SAP system but I have two problems.
    1. Logging on to enterprise using SAP user: I am getting the following error message when I choose SAP in the Athentication and enter SAP username and password and click log on.
    "Account Information Not Recognized: All of your system's 0 Concurrent Access Licenses are in use at this time or your system's license key has expired. Try again later or contact your administrator to obtain additional licenses. (FWB 00014)".
    2. Logging on to SAP system through SAP Logon pad: When I enter my username and passord in SAP system from the same server as I installed BusinessObjects I am getting a run time error.
    Did any one of you had the same problem or does any one of you have any clue how to solve this?
    Thanks in advance.

    Hi,
    I assume that you have a key for named licences (You can check this in the CMC under Licence keys).
    What you need to do is to go in the CMC, navigate to Authentication->SAP->Options and select the Named users option.
    Regards,
    Stratos

  • Copy reports from one business objects server to another

    How do I copy all the reports published in my production BO server to my test server. I did this once but can not remember. Is it the import wizzard?

    yes you can use the import wizard to export your reports from one server to another server
    just open the import wizard, connect to your source server, choose object types you want to export (folders, reports, users,,,,etc),,, then choose the objects itself, then connect to the destination server, and the import wizard will guide you through this process.
    good luck

  • Regarding the SAP Business objects Server configuration

    Hi Experts ,
    I was newly entered in to SAP Business Objects .Kindly i am requesting can you please let me know the follwing details .
    1) Latest server configuration of the SAP Business Objects .
    2) Latest version of the Crystal reporting / Desktop Intelligance / Web Intelligance / Universe.
    3) And also if do you have any document releated to the server configuration of the SAP Business objects kindly can you aatch the mail.
    Thanks and Regards,
    Vijay.

    The latest available version of the BO Server/Web Intelliggence /Dekstop Intelligence is XI 3.1 SP3 with FP 3.4.
    The latest available version of CR is CR 2008 SP3 with FP 3.4.
    You can find the latest documentation for Business Objects here:
    http://help.sap.com
    Regards,
    Stratos

  • Connect to Business object

    Hi,
    Can we able to connect our SAP with Business object(BI tool).
    If so tell me the procedure plz.
    Thanks in advance.
    From Kumar.

    Business object - are you talking about crystal (now part of business objects) if yes to connect you need to buy business objects integration kit for SAP from them
    Raja

Maybe you are looking for