WebStart with console based applications

Hi:
I've been struggling all day to get WebStart to work with a console based application (i.e., an application with no user interface that's launched from a shell window). When I launch the application with WebStart, the shell window is not visible. I've tried turning on the advanced option to show the console window, but only System.out and System.err go to there -- you cannot enter user input. Is there a way to run a console based application for a console based application? Thanks.
-- Greg

Hi,
WebStart cannot get input from the console window.
You may have to use some dialog boxes to get your input.
zamir

Similar Messages

ESSO with citrix based applications

Hi,
What is the process of integrating ESSO with Citrix based applications for single sign on.
I dint get any relavant docs for the integration.
CAn some one point me to the relavant documentation or steps on how to proceed with the integration.
I am trying to integrate with ESSO11g.
Regards
Vicky

Didn't work unfortunately. My Location Services were On so i proceeded to Restore. All went ok on the Restore but i still have the same problem. I have 4 App's that are location based and none of them work. Your suggestion ? Thanks for your help.

Problems with location based applications

I am having problems with all of my location based applications i.e. none of them work. It seems I can never be located by the GPS no matter where i am and i just get a permanently spinning wheel. I have deleted and reloaded the Apps (although even with the generic Maps App i cannot be located) and i have reset the phone Reset iPhone (but havent Reset Settings or Restored yet). I love my iPhone but this is very frustrating. Can someone please help ?

Didn't work unfortunately. My Location Services were On so i proceeded to Restore. All went ok on the Restore but i still have the same problem. I have 4 App's that are location based and none of them work. Your suggestion ? Thanks for your help.

Problem with Java-based application and WebVPN

Hello. Could you please help me in find out any specification/known limitations in using Java-based applications through WebVPN in Cisco ASA 5520 v8.3(2).
A customer of mine has got in trouble in using a Java viewer for graphical files that is invoked by another application (this one correctly served via WebVPN), that cannot be launched because JVM does not find it (NullPointer).
Our suspects are generically about the URL rewriting of the WebVPN and/or unsupported configuration in the ASA SSL certificates vs Java.
Any hint about where to search or what to try?
Thanks.

Hello. Could you please help me in find out any specification/known limitations in using Java-based applications through WebVPN in Cisco ASA 5520 v8.3(2).
A customer of mine has got in trouble in using a Java viewer for graphical files that is invoked by another application (this one correctly served via WebVPN), that cannot be launched because JVM does not find it (NullPointer).
Our suspects are generically about the URL rewriting of the WebVPN and/or unsupported configuration in the ASA SSL certificates vs Java.
Any hint about where to search or what to try?
Thanks.

Using Windows Vista and IE7 with Forms based applications

A user has Vista & iexplorer 7 installed on their machine and when they attempt to access the Professional Buyer responsibility (forms based) they receive an error message stating that 'Internet Explorer has stopped working'. When they attempt the same thing using a machine with Windows XP Pro and IE6 they do not have a problem. Could anyone tell me if they have experienced a similar issue and how do you work around it whilst still using Internet Explorer?? Also we are using
j-initiator version 1.3.1.18

Microsoft IE 7 on Vista is certified with Apps 11i provided that you meet the following requirements:
- Applications 11.5.10 plus Maintenance Pack 11.5.10 CU2 or later
- Oracle Developer 6i Patchset 18 (6.0.8.27.x) or later (Metalink Note 125767.1)
- Oracle Applications Technology 11i.ATG_PF.H Rollup 4 (RUP 4) (patch 4676589) or later
- Microsoft Vista desktop clients running Internet Explorer 7
- Sun Java plug-in (JRE) 1.5.0_12
Windows Vista + IE7 Certified with E-Business Suite
http://blogs.oracle.com/stevenChan/2007/11/windows_vista_ie7_certified_wi.html

Got error message with web based application that it would only work on MS Explorer 6.0 or newer. Any work around for this?

When accessing a web based program I got a message that it could only be accessed using MS Explorer 6.0 or newer. Is there a work around for this?

There is a way to do this.
But it works or not, I have no idea.
Enable "Develop menu".
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click the Develop menu and select "User Agent"
There are choices. Do not forget to make Safari default again afterwards.

Office 365 support with VB6 based application for example Mail Merge

Hi Development team,
Could i know how to use office 365 in our project step by step ? is it free available as trial version which work successfully
As our project is currently using Microsoft Office 2003/2007. for we example we run Mail Merge module and it opened in MS word Office 2007 by default as it is installed in our local Machine.
Currently i don't have office 365 licence software, does it require?
My point of contact is one of client is asking for why not we are using office 365 which is on cloud version.
Thanks
Anuj kumar
India
91+9582890489

Hi,
Welcome to MSDN.
I am afraid that issues related to VB6 are not supported in these forums, you could check that thread :
Where to post your VB 6 questions
In addition, you could post issues related to Office 365 which are not related to VB6
in http://answers.microsoft.com/en-us/office?auth=1 to get supports.
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SSO with Logon Ticket to non-SAP Unix based application

Hi all,
Anyone has implemented SSO with Logon Ticket to a Unix box ?
We need to achieve Single Sign On between our EP5.0 SP5 Portal and a third-party web application with a front-end on a Unix AIX machine with Apache.
We achieved SSO with non-SAP applications with Logon Tickets, but one was to an IIS system in another domain (we therefore used the standard Web Filter for IIS and declared it in usermanagement for cross-domain support) and another one running on Windows platform (we used the C libraries provided in the "Logon Ticket Toolkit": NT or Linux only).
From what we understand and found on the web sites, we cannot reuse any standard web filter (none for Unix, am I correct ???) and want to implement custom code using SAP libraries, if possible using Java
-> Are there any Java libraries that are available to both:
. verify the logon ticket with the deployed Portal public key
. decrypt/extract the authenticated username from this ticket ??
I've seen a mention of Java libraries, and Unix, in a SAP EP 6.0 document but I'm not sure where to find them...
Is the SAP Logon Ticket issued the same way in EP 5.0 and EP 6.0 ?
I managed to find something called SAPSSOEXT, for AIX, which contains some partial library and a sample, but it is dated 2000 !! Anyone has more information about this ?
Any hint is very much appreciated.
Thanks a lot
Olivier

Check these links for reference regarding AIX and Apache using X.509 certificates:
http://publib16.boulder.ibm.com/pseries/en_US/aixbman/security/cas_pki.htm
And just using cookies -
http://forums.devshed.com/archive/t-105611 (perl based)
You can also use mod_ssl built into your Apache to facilitate both certificate based authentication as well as encryption.
The mod_ssl route is most secure (because of the encryption), the IBM link is comprehensive but requires extra infrastructure (LDAP).
Nick
Nick

BC E-commerce integrated with Subscription Based Web Application

I am considering using BC for my company's corporate website as well as the online store. We sell a subscription based web application which will have 3 or more flavors (products) and will need to bill customers on a recurring monthly or annual basis.
For the monthly subscriptions, we want to bill the customer based on the "highwater" mark with regards to user quantity for that given month. This gives the users the flexibility to add/remove users freely without the fuss of having to contact a sales representative to adjust their account/recurring order.
I would imagine this would happen one of two ways:
The user signs up creating their account both in our web application and the ecommerce site and is billed for the first time. In the ensuing months, either: the e-commerce site communicates with our web application to get the high water mark quantity for that billing cycle or
Our web application sends a new order each month to the e-commerce site, including the highwater mark quantity, giving the illusion to the user that it is indeed a recurring order but behind the scenes they are actually individual orders.
Annual subscription customers are a bit more challenging. We still want the users to have the flexibility to add/remove users with minimal effort. However, since they are being billed on an annual basis, prorating additional users will be necessary. So if customer who previously purchased 5 licenses, adds 5 more licenses during month 6 of their annual subscription term, we would need the e-commerce solution to bill them once immediately for the 50% prorated 5 licenses, then bill them 6 month's later for the total 10 license subscription renewal.
At a bit of higher level, we would prefer the customer to manage all their billing/account info within our web application rather than going to an external store to do so.
One other caveat, we would prefer not to store credit card info on our site. Preferably that would be stored in our payment gateway (Auth.net). This may or may not affect the workflows described above.
My Questions:
Can the BC e-commerce solution support the workflows above?If so, is there any documentation/resources available to research this further?
Are there any BC customers that currently do something similar? If so, who and how similar?

Hi Greg,
From what you have described it seems to me that you need some complex server side logic which BC doesn't allow. In any case you'd have to develop an app that communicates between BC and that other application through our API, which will control the orders as per your requirement. In particular, there's no easy way for end user to control their recurring monthly or annual subscription, there's no way to apply immediate discounts according to earlier purchases that will satisfy this requirement "if customer who previously purchased 5 licenses, adds 5 more licenses during month 6 of their annual subscription term, we would need the e-commerce solution to bill them once immediately for the 50% prorated 5 licenses, then bill them 6 month's later for the total 10 license subscription renewal", you can't build in this functionality into BC " the e-commerce site communicates with our web application to get the high water mark quantity for that billing cycle" and there are few more things there which suggest to me that you need something custom.
Cheers,
-mario

Dealing with a turn based application with using a global static variable

Hi there. I read some articles about JavaFX concurrency,so as a newbie i have to practice on it. Now i'm trying to implement a turn based application that can be played among 3-6 players. Moreover, i use a scene imported from a .fxml file and i have to update it correctly depends on some calculations of each thread (in other word players ). My main issue is, i don't wanna use a while loop which checks the state of game like;
while( GameState != State.GAME_OVER ){
     currentPlayer = GameBoard.getNextPlayer();
     // do some actions,calculations etc.
So, i want to use worker threads instead of this while loop. I guess using Service class for iterating and assigning the next player will be suitable instead of using the while loop and Tasks for doing each player's calculation,or waiting for some responses from Human players on UI based,however, i'm struggling with two problems.
There should a global static variable ( like GameState which is an Enumarator ) determines the state of the game,so it should be updated and should be checked by each turn. Is there any way to do this ?
How can i get rid off this while loop ?
I will appreciate for every answer. Thanks anyway.

It shouldn't make too much difference. The basic idea is that you have a model class representing your game state (the Game class in jsmith's example). When a player makes a move, you update the state of the game. Since this will result in changes to the UI, this update should be performed on the FX Application Thread.
If the player making the move is a human player, the move will likely be made by a user action (button press or mouse click, etc); this will be handled on the FX Application thread anyway.
When the state of the game changes so it is the turn of an "artificial" player to make a move, have the object representing the artificial player calculate its next move, and then update the game state. Since this is a response to the game state changing (it's now the turn of the artificial player), this will also be on the FX Application Thread.
The only (slight) complexity comes if the calculation of the move for the artificial player takes a long time. You don't want to perform this long running calculation on the FX Application Thread. The cleanest way to manage this is to launch a Task which calculates the desired move, and then updates the game state when the move is ready. So, something like this:
GameState game = ... ;
// UI is bound to the game state.
ExecutorService executorService = ... ;
final Player currentPlayer = game.getCurrentPlayer() ;
final Task<Move> calculateMoveTask = new Task<Move>() {
     @Override
     public Move call() {
          Move move = // compute next move...
          return move ;
calculateMoveTask.setOnSucceeded(new EventHandler<WorkerStateEvent>() {
     @Override
     public void handle(WorkerStateEvent event) {
          gameState.makeMove(currentPlayer, calculateMoveTask.getValue());
executorService.submit(calculateMoveTask);
If you're doing more threading than that, you're probably doing it wrong... . There should also be no need for anything to be held as a "global" static variable (the idea above is the only structural modification you need to the example posted by jsmith).

XI Interoperability with C-based Custom Applications

How can XI interoperate/connect to C-based custom applications? What connectivity option (i.e. adapters) can be used for both inbound and outbound processing? Please provide the best approach using the existing technology adapters, existing 3rd-party adapters, other means, while excluding the development of custom adapters.

Hi,
Am not sure about HTTP, but for the file part it iwll be quite simple .
I learnt C during my university days and from what I remember, you can write and read file using standard C / C++ classes / functions.
So, when the C application needs to talk / send data to XI, it can write a file using the standard functions available and using the sender File adapter of XI, you can poll the same file and do the needful in XI ( including Content Conversion if the C application is to create a TXT file).
In the other case if XI needs to send data to the C application, then XI can write a file and the C application can read this file using its standard functions.
With respect to XI, you will be dealing with a File Bases Interface with the C application. And the process will be just like any other file interface.
Regards
Bhavesh

Forms 6i based application compatibility with Oracle Lite 10g

My client is currently using an Oracle Forms 6i based application (together with a Jinitiator)
in an application deployed to 50 countries using Oracle Lite 9i as the Mobile Application Server and Oracle 8i as the database.
We are considering an update to Oracle 10g database and 10g Rel 3 mobile application server.
Can anyone advise on the impact of such an application on the Forms 6i application and if there is a recommended process for the upgrade of the forms application?

do you mean the OAS 10g Rel. 3 ? That application server has no forms-component. Only the Rel.2
Your Forms 6i is certified against 10g databases with patch 17 and 18. Download them from the metalink.oracle.com

Building a simple field based application with OA framework

Hello everyone,
I have an assignment to build a simple form that takes in some parameters and in which some of the fields will be validated with a value set. Using the information from this form, I then have to use the parameters in a PL/SQL function/procedure and return a value of successful or not.
Basically a simple form based application.
I was wondering if it is possible to do this in OA Framework. All I hear about is extensions and personalizations but is it possible to build a simple application with it?
Also, can anyone point me to a good tutorial showing how to build a simple application in OA framework?
Or if OA framework won't do the job, can I use ADF (on oracle 11i) to accomplish this?
Thanks a lot in advance

Please visit
http://oracle.anilpassi.com/oa-framework-tutorials-training.html
It would be really helpful :)

How to start an Swing based Application with a display of an Image

I want that when I run my swing based application, first a specified image should me displayed

I was talking about the determination of the resolution of image in (int). Resolution means number of pixels in per unit area of the image, I think it has nothing to do with image magnification. If you have some another idea ,tell me on [email protected]

Web Based Application Single Sign on With Enterprise Portal

Good day Developers,
My question is really a two part question so forgive me in advance for asking in one post as I think they are relative to each other. My project is currently exlporing the creation of functionality that will allow the following:
1. We want to allow a secure Web Based application possessing the abilitiy to auithenticate the user into Enterprise Portal and by passing the login screen to get to a landing page/iview in our Enterprise Portal instannce.
2. We want the abilitity to perform a check of the user and create the user in the enterprise portal on the fly if they do not already exist.
So far in my research I've come across tools and white papers mentioning the use rof oAuth and OpenID. Is that the right way to tackle these two items. Thanks for your help in advance.
JD

Hi
1. You can do SSO between you application and portal using Verisign or third party authentication tool. I am not pretty sure how landing page and all will work as you mentioned.
As portal is web based, you can deply your application in portal server. So that you will not need any other authentication tool.Also you can save effort , cost.
2. By deploying application in portal also you do not have to concentrate on User management, which is itself a huge effort you have to put. Else you can go for third party tools like Identity management or ADS.
-Yogesh

WebStart with console based applications

Similar Messages

Maybe you are looking for