WebUI dont show anything
hello everybody,
I have setup a SAP CRM 7.0 System with a IDES Database (Double Stack: Java + Abap).
At the moment I am making the post installation steps. Now i try to activate the WebUI.
Actually I activated ALL services (with Transaction SICF) and I have made a User with Parameters 'CRM_UI_PROFILE' and 'SALESPRO' as Parameter ID and Parameter Value.
If i now go to the WebUI, the WebUI starts and I can log in but then there is just a nearly empty site. I have the SAP CRM Logo at the top of the Left side. Also the main page and the Navbar at the Left but when I click on perhaps Personlize there is nothing happen.
Also at the Navigation on the Left side and the main Page in the middle there are no values or something like that. just an empty side.
I didnt really know what should be shown there because it is my first SAP CRM installation, but I think the site should not be empty.
So what had i forgotten?
Is it OK that I activated all services? Could there a Problem with the IDES Database connection (although there is no error in the logs)? I hope you can help me.
Thanks in advance
Hello everybody
the problem was that i had the wrong client.
Similar Messages
-
I am using the iphone 4s in india now. i bought it from canada (factory unlocked). But here in india. when i put my vodafone sim in 4s. It only shows th name of the carrier but dont show the range towers. i tried airtel and reliance carriers also.but the result was same. now what can i do??
BobbyLe wrote:
I could not follow the AT&T instruction because my network (Optus) doesn't have anything as username or password or dial-up phone number. The only parameter I needed to key into Mobilink (the software I am running on the S10 is the APN which is: connectme that's it no number, no PIN, no password, nothing else.
How do I tell Windows to do that?
*99***1# <--- the number to call
at+cgdcont=1,"ip","connectme" <----- the string to put in the advanced field of the modem -
Songs on my ipod dont show up the way they do in itunes
there have been a few cds that when I add them to my iTunes library work great, but once I put them on my iPod they dont show up where they're supposed to. For example, I have The Beatles' 1 album and it shows up in iTunes:
Artist: The Beatles
Album: 1
and when I get on my iPod there is no artist for The Beatles or Beatles, The or anything. But when I look in albums I can find the 1 album and thats where all the songs are. When the songs are played, it also says that the artist is The Beatles, but it still wont show up on the artist list. The same thing has happened in other ways, like one of my cds doesnt show up under the artist or album lists but I can pick the individual songs out of the songs section. How can I fix this? it shows up correctly when the song is actually plated, and on my itunes, but they arent categorized at all.
iPod 30gbThis isn't foolproof but there are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song is marked as part of a compilation or 2) it is missing an album name.
If the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder which may be why this happens.
Also if tracks are missing an Album name in the Info tab, this information needs to be filled in, in the absence of one you can just add None or Miscellaneous. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod -
2 months ago my ipod was stolen for a plummbing men that come to my home, i want to make the report, but i dont have anything to find my serail number, I tried itunes, but didnt find a link that had lead me to my seral number, the old boxes is gone, please help me how can do it, and if i can recupere my i pod some day i had tresure information on it.
If your iPod was the last device that you connected to and synced with your iTunes library, there is a chance you might be able to get the serial # to show up in the Device Connectivity diagnostic report. See here for instructions on running this test.
iTunes for Windows: Device Connectivity Tests
If you have previously registered the device with Apple, you can view it's serial # in your list of devices you have registered under your Apple ID.
https://expresslane.apple.com/GetproductgroupList.do
See here: iPod: How to find the serial number
B-rock -
Report in pdf...not showing anything
hii all
i have created report with parameters..... when report is called, its preview opens properly (parameter form is removed, so directly report opens) and shows everything....but when from preview window, File->generate to file->PDF is done.....it does not show anything.......
any idea why this happens....?yes report is proper even if parameter form is not shown.....but PDF blank....
and if i keep parameter form.. it displays report properly and when i generate PDF it asks for parameter and that time it displays pdf properly....
but i dont want parameter form...thats why i removed it..and so it is not asking for parameter when generating PDF...and i think that why it is not PDF blank....
so any solution to this? -
Photos dont show up on windows
I backed up some photos to my iphone 3g. These pictures were some i took with a digital camera. I restored my operating system and now i want to put the photos back onto my computer but they dont show up anywhere. Any photos i took with my phone show up. When i plug my phone into my computer it tries to import my photos but doesnt find anything new but i know there are photos on the phone that are not on the computer. I tried looking in the iphone files through my computer and found only the photos taken with my phone.
Any ideas how to get the photos back onto my computer?The iphone is NOT a backup device.
It optimizes photos for viewing on iphone - reducing size and quality.
The photo sync is also only ONE WAY - computer to iphone.
You could e-mail them to yourself, but they will not be of the original quality.
Did you fail to backup your pics? -
X99S SLI PLUS - HDs in SATA5 and SATA6 dont show
Hi
I just bought a new motherboard for a work pc.
I wanna do 6 disk raid 10 in SATA port 1-6. Bios detects disk 1-4 but not 5-6.
Identical disk, identical cables, identical everything. If I move them to port 7-8 they show, but these ports dont support raid.
I dont have anything in the M2 slot.
What am I doing wrong?Quote from: stenergut on 27-September-14, 04:43:53
Hi
I just bought a new motherboard for a work pc.
I wanna do 6 disk raid 10 in SATA port 1-6. Bios detects disk 1-4 but not 5-6.
Identical disk, identical cables, identical everything. If I move them to port 7-8 they show, but these ports dont support raid.
I dont have anything in the M2 slot.
What am I doing wrong?
Same problem as the OP. Bought this board with the intention to run RAID using 6 SSD's using ports 1-6 like documented. Once you create the raid array it drops port 6 (0.5 in the bios) Port 5 stays up for me so thats the only difference. Loading windows 8.1 and installing the latest Intel RST shows even stranger issues. Port 5 will be empty and it will show a missing disk in the RAID view with a serial number that is missing the first three digits and it puts a ":0" at the end of the serial number!
"Set M.2 PCH Strap to [M.2 PCIE]
That should force the M.2 port to use two PCI-E lanes.
See if SATA5 and SATA6 become available."
The above was suggested but if you change m.2 PCH strap to PCIE then you loose both ports 5-6. You don't get the ability to use them.
As it stands I do not see any way this motherboard can support more than 4 hard drives in a RAID setup. -
IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!
It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes
-
Does anybody know why my ipod touch 3rd generations screen does not work show anything? The screen is all black like it is switched off, but my ipod synchronises to my iTunes library. It is fully charged. Please Help!!!
Try here:
iPod touch: Hardware troubleshooting -
ordered my iphone 6 plus from atnt on september 29 when will it be ship to my house but it doesnt show anything on atnt order information! what should i do?
the truth is that i order my iphone 6 plus on september 26 from atnt store and on site but my credit card was declined
so i tried it the next day but it works but from atnt site doesnt show anything(it only show my order on iphone 6 plus just like the last time)
when will it say your order has been shipped?
when will it be ship to my house?
and also im going to use atnt next on iphone 6 plus
please answer my question!This is a user to user technical support forum. We can't possibly answer your question.
-
# is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..
http://support.apple.com/kb/HT1848 Did you transfer your purchased item, take a look at the link
-
i have an ipod touch and lyrics dont show up when i play a song. i know how to insert lyrics they just dont show up. what can i do?
Are you trimming the videos on the iPod?
http://blogs.vancouversun.com/2010/09/20/how-to-fix-out-of-sync-audio-on-videos- taken-with-your-iphone-or-ipod-touch-4g/
Also see:
https://discussions.apple.com/message/12873340#12873340 -
I have my iphone4 activated and working since 3days, i purchased it from ebay with 1year warranty, when i check the serial number from Apple store at Bangalore Forum mall, they say that it does not show anything and 'OUT OF WARRANTY'.
Now i have a problem in it, all icons just shake and system hangs, needs restarting.You need to go back to the person you bought it from. Sounds like they may have sold you phone that is not as described.
Did you check the warranty status before purchasing it? -
Over heating on charge and it is no longer showing anything on the screen
My iPhone 5 is over heating on charge and it is no longer showing anything on the screen. I was using it when the screen went white and it hasn't worked since. I have tried to both restart it and to restore it. as the screen doesn't not work it is hard to tell the condition of the phone. However it occasionally makes the lock noise when pushing the lock button and also occasionally vibrates when operating the side switch. I can not leave it plugged in on charge as it gets very hot and it is no longer recognised in iTunes unless i put it in recovery mode.
Has anyone else has this problem or can recommend a solution. I bought it second hard a while ago so it is not under any warranty.
Thank youSounds like the battery has become unstable
Take it to an Apple store Genius bar for evaluation Suggest you do not attempt to charge any more
at worse Apple may offer an Out of Warranty exchange device identical to donor
In UK price over the counter is £209 -
Leopard update will not boot HD, 2nd HD or show anything on the desktop?
G5 Dual 2 GHz, 4 GB RAM - 250 GB main HD, 2nd HD 500 GB internal used for storage only. Running 10.4.10 before Leopard
Note: I checked my permissions and verified my HD before installing Leopard. I did not do a clean install, I did an update. I'm going to buy a new desktop soon, so I opted for the quick and dirty. Chose to keep old settings during upgrade.
The install seemed to go OK. I got through the registration part OK (it was all filled in automatically) and connected to Apple. Then on the restart, it would only load as far as the Menu on the screen. It will not mount the 2 internal Hard drives I have in the machine and it will not show anything that was on the desktop before. Only spinning color wheel for 5 hours. I can get the Dock up, even turned off the Hiding. Went to the gray Apple (old blue one) and called up the system preferences. Now the System Preferences name is stuck in the Menu. Had to force quit the machine by holding in the power button.
On several restarts, I tried to dump the P-Ram, also a start up in safety mode (which didn't work - holding down the Shift Key on startup). Nothing seems to work.
The wierd thing is, I can see the Hard drive and my 2nd HD (internal storage drive) on my other computers. So I'm backing up everything to them and an external 1 TB HD I had connected to the G5.
I also booted from the Leopard DVD after I had this proplem and went to Disk Utilities and verified the Disk was OK and the Disk permissions were OK. Also periodiacally I get a window that says: Apple Event timed out. The name of the window says: .rvncs, whatever that means.
Something tells me this is not good.
Any ideas by anyone on how I can get my desktop back and have my HD's mount?
I really don't want to erase my HD, just too much stuff to loose.
Yes I know, you have never really been able to just update a Mac OS successfully, only clean installs have ever seemed to work.
Thanks and any help will be appreciated,
JimQuote
I have the same exact issue...every last word. Except I am running a MSI P6n Diamond. Have any info back from MSI?
Please don't hijack this thread, but open you own.
Give full system specs with detailed information to every single component of your system configuration and describe your problems in you own words again.
Even if you problem appears to be similiar, it must not necessarely have the same causes.
I am sure you will get help and attention in your own new thread.
Maybe this can be solved easily.
Maybe you are looking for
-
Does any one know how to uninstall xcode 4.4 on OSX 10.7?
Because of openframeworks, I want to swich back to xcode 4.2 not the xcode 4.4 after I accidentally upgraded it. I tried the /Developer/Library/uninstall-devtools or deleting the xcode.app from the application folder, none of it works, everytime I tr
-
Entering a URL in the address bar and hitting enter does nothing. Neither the "enter" button or "address bar arrow", for going to the website, function. Website does not load and no error messages appear. "Enter" button works fine in the FF search bo
-
How to Merge the Contents of Two Folders in Lion, Keeping the Newer Versions of Duplicate Files.
Select and copy all the contents of the folder containing the newer files. Paste the files ONTO the folder containing the older files. The unique files will be copied into the older folder without further ado. For the duplicates, a window will app
-
Hi Experts, In My Project iam facing one problem with kendo Combo box actually my Application Requirement is Left Menu – Combobox Fields search has to Freeze on all inner frames but am facing problem with Cascade From when i kept Cascade From in my
-
HT204022 photo stream, pictures to the computer and then deleted?
In my albums, photo stream shows up with hundreds of pictures in it. I want to copy them to my computer and delete them, but I don't seem to know how to do this. Help please. photo stream has no delete button anywhere that i can find.