WebUI : Entry Price in Sales Order - not user friendly

Dear all,
Have any of you use Sales Order entry on SAP CRM2007 WebUI ?
I would like to hear comment from you regarding on how you enter the item price in Sales Order module.
This is what I found, to enter single price for a product you need to go through at least 3 steps after you
open Sales Order Document.
1. Select/Enter the Product and Click on Edit for that particular product
2. System will open next page showing more detail info of that Product
here you need to click on Price section again
3. Finally the system will show the page where you can enter the price
For each of page transition the system may takes 3-7 seconds, so up to around 9-20 seconds user needs
to spend just to entry a single price in one Item.
Even worst, if there is more that one product, user have to click on back button couple times to go back
to main document to click another product to edit. Means another waste of time!
I like to hear comment from you and if you have better idea on how to simplify this, it will be great!
Some development effort on WebUI components need to be done I think, appreciate if you can lead
to more simple way to accommodate this.
Thanks,
Gun.

Hi Michael,
Is the configuration of easy condition entry only for IC WebClient?
Because that is what I found in SPRO for Set Up Easy Condition Enty documentation (at Condition 1
field).
Now, my initial question is refer to entry price at Sales Order transaction in Web UI (not IC WebClient).
I tried to setup Easy Condition Entry, put my pricing procedure and maintain condition 1.
and set visible for field Condition 1 Value and Rate in the items table.
I can see the fields, but I can only see fields can be modified/enter if I have maintained manually the price
at normal way (click Edit on item line, then click Edit again on Price, then click again to maintain the
price).
I applied Notes 1292789, but this even worst, Condition 1, Value 1, Rate 1 cannot be edited.
Is there any missing prerequisite setting here?
Have you tried this works on Sales Order entry on Web UI (not IC Webclient) ?
Appreciate your further information,
Gun.

Similar Messages

How to change price in Sales order using user exit ?

The scenario is - when the user creates a sales order, there has to be an RFC called to another system to get the price of the materials in that system. Then it has to overwrite that price in this S.O.
Which exit in S.O can be used for this and then what processing needs to be done after the RFC call to get price. Like how the price can be overwritten on this S.O ? (Lets say to get price we use some BAPI to the other system). Any help ?

Dear Theodorous,
1)Please check the Material has been extended to the second plant.
2) Assign the second Plant to Sales Org and Dist Channel
If you have any concern revert back the same
Regards
Amjath

Hide Unit price from sales order for sales user without change authorization of document setting

Hi all expert
Hide Unit price from sales user without change authorization of document setting.
I have also refer this note
SAP B1 2005 Purchas Order,Good Reciept PO'S, and Unit Price Block
but sill I had not getting my proper solution.
I want to restrict sales person to see & access unit price. Here I know option of block authorization of document setting but its not good option because , In future ,if sales user wants to changes forms setting in future so Its become problematic for user. so I want do this without restrict user for form setting & only hide unit price table from him/her. also He/her able to access form setting with out unit price.
Please reply
Amol Nikam

Hi Experts,
Please Tell me Is there any option "Hide Unit price from sales order for sales user without change authorization of document setting"
Regards/Thanks
Amol

How to mark up the price for sales order entry?

Hi Gurus,
How to Mark up the price for sales order entry?
Example: Item Price: $10, Adding 20% Margin
Selliing price of the item is $12
we are giving many typs discounts like festival Discount, customerwise, Order value wise etc..
After giving above discounts, if discount falls below $10 system should not allow to book the order, Trigger should go to respective person or sales person saying that item price falling below cost, system should not allow to book the sales order.
How to configure this scenarios in Order management Module, appreciate your inputs, advise.
Regards
AK

Thanks for your response,
can you please guide me step to achieve this requirement.
Regards
AK

Internal Sales order not using Price List, Price Showing '0'

Dear All,
In the Internal Sales Order, why the list price is not used from the price list, why do we need to set the cost to get the price?
Plz Clarify
Thanks
RSM

Hi,
Internal Sales order is nothing but selling the goods between 2 inventory organizations under same operating unit.
This inventory Org is always within the operating Unit/Business group.
Hence Item Cost defaults in the Item Cost and not the item Price.
If Items are sold to external Customers then Item Prcie will be seen in the sales orders.
iBut yes,upon customization we can still see Item Price in Sales Orders.
Thanks
-Arif.

Price change in Sales Order not incorporated in Delivery

Hi All,
We are facing a problem, when creating Delivery against the Sales Order, changed Price in Sales Order is not being copied.Pricing is activated in Delivery.Condition record is maintained for Price.Condition type for Price is same in both Sales Order and Delivery.
In Delivey the system is picking the condition record Price and not the changed Sales order Price which we want along some other condition types.
kindly suggest some solution soon.
thanks and regards

Hi Adams
I suspect what is happening is that the pricing procedure is getting re-determined in the delivery document.
How many such condition types are there? If there are a few, then you can create new pricing condition types for the deliveries. Dont assign any access seq to them. Further, define a new Alt cal Type for these condition types to copy the value from the corresponding condition type in sales document.
e.g.
Reward points if thi helps you
Rgds

Sales Order Pricing User Exit Problem

Hi,
I am facing a problem related to coding in Sales Order pricing user exits. Scenario is as mentioned below:
Based on Material Entered and Sold To in Sales Order, auto determination of a manual pricing condition happens. For doing this, coding has been done in USEREXIT_PRICING_PREPARE_TKOMP by changing XKOMV table. Auto determination of the manual price is happening properly.
From Sales Overview Screen when user goes to the Conditions tab, Net Value is not getting calculated. When we navigate away to Schedule line tab and then come back to COnditions tab, Net Value is automatically getting calculated.
AM i missing something in the coding part? As the data is getting populated automatically I guess some piece of code needs to be triggered. Can anyone shed some light into this.
Thanks in advance,
thunderans.

Prabhu: After filling in XKOMV structure, I am calling FM PRICING. On doing this, the Sales Pricing is getting calculated but even then net value of order at header i.e VBAK-NETWR is not getting populated when we are in Sales Overview screen. When, I am getting into Conditions tab and coming back to Sales Overview screen, Net value is getting populated correctly. This portion of everything not getting populated at the same time is bothering me. The pricing conditon that I am filling is a manual pricing condition.
I put a breakpoint after FM PRICING which correctly populates XKOMV structure. How do I properly update Order Net Value in Sales Overview screen wihtout having to navigate to any other tab?
Nicklas: I am looping at Order line within the user exit USEREXIT_PRICING_PREPARE_TKOMP and determining price. Once all line items are processed, I am using the FM PRICING for calculating Sales Prices.
J@Y: Request to send me a bit more details into your approach.

Change price in Sales Order created with reference with Quote

Hi Experts,
Need to change price (eg..1000USD to 1100USD) in sales order (va02). Here Sales Order is created (va01)with reference with Quote(va21) where price in maintained (as 1000USD). so price in Sales Order is copied from Quote. Now, If I want to do the change in Sales Order (from 1000USD to 1100USD) kindly suggest me what are all the possible ways. Can I do the changes within the existing documents rather than creating new docs. due to the change.
Note: User is creating new Quote with 1100USD and creating subsequent new Sales Order with new Quote.
Thanks
Viswanathan

Hi,
In va02 you double-click on the material that has been entered, then in the new screen goto the condition tab, here u will find the $1000 that you have entered, and then change it to $1100.
Swapnil

Capture the purchase price during sales order creation

Hi,
User wanted to capture the item purchase price when a sales order is raised.
Currently, the sales order capture the VPRS whcih is coming from the material valuation (MAP) price.
Is there a standard condition type that will captured the purchase price in the PIR record or the PP condition?
Thanks

Hi
As far as i know it is not possible to fetch the purchase price in sales order.
May be you can define an another condition type asa statistical and maintain the condition records for that. But it will be a tedious job for maintaining all the things.
regards
Prashanth

How to update the condition price in sales order while creating the invoice

Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
Balaram

No, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram

Sales Order Not Checked for Credit Limit

Most of the time, in our course of business, the customer account and BP/Credit limit are setup prior to the input of any order.
However, if in the case the customer was setup (BP created in background, but segment/credit limit not assigned yet), and an order was created immediately the order will not be checked for credit.
We are considering putting a check in the order that it must be checked or it is considered incomplete.
We have a background job that runs every few hours to assign the BP to the credit segment (we have only one credit segment, in addition to 0000) and give a default credit limit. But we need to ensure that all orders are checked.
How are others handling this situation?
Thanks

We have already put in place the use of a background job to create the BP/segment with a default credit limit.
We are hoping to come up with a method that is full proof and not manual.
Depending on how frequently the job runs and the timing between that and setting up a customer master record and entry of a sales order, there could be a sales order entered before the background job was completed.

Need to pull INITIAL(vbap)net price of Sales Order, after changing viaVA02

Hi Experts,
Mine is differetnt requirement..........
I created a my_Sales_order_12345678 with 2 items, as follows,(all following values/entries r for my_Sales_order_12345678)
line item_10---->net_value_netpr = $100
line item_20---->net_value_netpr = $200
Then the VBAP entries as r as follows,
POSNR -
>NETPR
10----
> $100
20----
> $200
I changed first time as via VA02 tx, as
line item_10---->net_value_netpr = $300
line item_20---->net_value_netpr = $400
Then the VBAP entries as r as follows,
POSNR -
>NETPR
10----
> $300
20----
> $400
I changed second time as via VA02 tx, as
line item_10---->net_value_netpr = $500
line item_20---->net_value_netpr = $600
Then the VBAP entries as r as follows,
POSNR -
>NETPR
10----
> $500
20----
> $600
My requirement: for some reason, I need the initial values, I mean
the VBAP entries of,
POSNR -
>NETPR
10----
> $100
20----
> $200
I tried with CDHDR & CDPOS tbls, but no use? So, from Where Can I get/pull them??
thanq
Edited by: Srinivas on Jan 24, 2008 12:22 AM

hi sirnivas..
Thanq you for the points..these are the first i ever recieved..
if you are working on peice of code which can get the price history do me a favour if you have finished the code just explain it to me who did u do that...
i have been working on an object from last two weeks to get the latest price...
the thing is even though the price for condition items has been changed it wont get updated in the Sales orders unless new pricing fot the document is done...
so i have to get all the sales orders who condition items price has been changed and display them in an ALV...so if you can get the exact old values...for the conditions i guess the opposite also can be done.....
Here i have suggestion for you...in condition items there is a process called SCHEMA ( pricing Schema) which you can see using Condition Analysis button at the bottom of the condition item window...
you can see all the price changes to the condition when you parse the tree structure of the procedure..EXAMPLE :- R0000 etc...
so some Sales orders if the Schema has been changed all the existing condition are replaced by New ones from the changed Schema...so i guess that would play an important role in deciding the Price of Sales order...
I know this is bit long but .....if you did finsish your program do let me know how you did it...
Thankyou very much and good luck.

Update price on sales order

Hi All,
we have this requirement as below:
Update price master data every half year, once the price is updated, all price on the sales order should be refreshed. Does SAP have standard function to update price on sales order? We don't want to refresh sales order one by one, after the price master is updated.
Thank you!

Hi,
You can try with t-code MASS but you'll not have an option of Pricing Update over there, but I can suggest you one wayout in this situation as below:
- Go to MASS
- Select object type BUS2032
- Select Sales Order Header data
- Click on fields
- You will see Pricing Date field
- Select and execute
Logic behind this option is as below
- your old sales orders would have old pricing date on which old pricing records were existing.
- once you prices are updated half yearly and if you change the pricing date system will again look for the condition records and then it will update the prices as per new pricing date
I have not done this actually, but this may work because logic seems to be right.
Hrishi

Material cost / Price on sales order ?

Do we get the material Cost / Price (Vendor Material price ) on sales Order ?
I means can we see the material Cost and Material Sales price in Sales order ?
Hope my question clear .

Hi -
Please follow above answer and ignore my reply.
Thanks!
Anesh B
Edited by: Anesh B on Oct 7, 2009 4:28 PM

BASIC PRICE OF SALE ORDER

Hi All,
I have a requirement , i have a report which shows all pending sale order,
i want to display basic price of sale ordrer ,from which table would i get the basic price against sale order.
Thanks & Regards
Lalith

Hi,
Pick up knumv fron VBAK. Then access KONV with KNUMV = vbak-kunmv and kschl = 'PR00' ( This could be different, since this is SAP standard ).
I hope this helps,
Regards
Raju Chitale

WebUI : Entry Price in Sales Order - not user friendly

Similar Messages

Maybe you are looking for