WebUtil - Bean Not Found

HI......
I am working on Oracle Forms 10g Release 2:
Just downloaded webutil_106.zip and Unzip jacob_18.zip
to D:\DevSuiteHome_1\forms\java, D:\DevSuiteHome_1\forms\server
and done all the config setups .
WEBUTIL_CONFIG and CLASSPATH are already set in default.env
Appended the configuration of D:\DevSuiteHome_1\forms\server\formsweb.cfg
archive_jini=f90all_jinit.jar,frmwebutil.jar,jacob.jar
WebUtilArchive=frmwebutil.jar,jacob.jar
but when I am doing sign_webutil.bat D:\DevSuiteHome_1\forms\java\frmwebutil.jar getting error as
sign_webutil.bat C:\DevSuiteHome_1\forms\java\jacob.jar getting error as an internal or external command,
operable program or batch file.
plZ help
roopa

is this post now obsolete ?? WebUtil Demo Runtime "Bean not found" Error
if so, please tell us, because this post is not as big as the other

Similar Messages

Webutil bean not found when using call_form with no_share_library_data

Hi,
I have two Forms modules and i navigate from Form A to Form B using a call_form.
If i call Form B with NO_SHARE_LIBRARY_DATA param, i get a webutil error: "oracle.forms.webutil.file.filefunctions bean not found"
If i call it with SHARE_LIBRARY_DATA, there no error and my webutil function works as expected.
Webutil is used in our application are works well so i don't think that it's webutil config problem.
Any idea?
Tx

Thanks for your answer.
Now I'am a little bit further with my debugging but it's more strange! forget the share_library_data...
I start a common form with webutil.pll attached and i will use the Webutil_File.File_Exists function for example
if i call it in the WNFI or WNBI, i get the error
if i call it via a push-button WBP for example, it works!
below the java console ouput when i get the error and after pushing ok on the error
Loading http://sdp6:7778/sdp-jar_dev/frmwebutil.jar from JAR cache
Loading http://sdp6:7778/forms/java/frmall_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 10.1.2.2
Loading http://sdp6:7778/sdp-jar_dev/hst65.jar from JAR cache
Loading http://sdp6:7778/sdp-jar_dev/sdpimage.jar from JAR cache
Loading http://sdp6:7778/sdp-jar_dev/host.jar from JAR cache
Loading http://sdp6:7778/sdp-jar_dev/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
La version Forms Applet est : 10.1.2.2
2008-janv.-10 18:02:24.711 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.727 WUI[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.727 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.727 WUF[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.743 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.743 WUH[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.743 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.743 WUS[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.758 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.758 WUT[SessionFunctions.init()] Max Transfer chunk size set to 4048
2008-janv.-10 18:02:24.758 WUT[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.977 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.977 WUO[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.977 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.977 WUL[VBeanCommon.getIPAddress()] 172.22.35.17
2008-janv.-10 18:02:24.977 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2008-janv.-10 18:02:24.977 WUB[VBeanCommon.getIPAddress()] 172.22.35.17
AFTER PUSH OK on the error
2008-janv.-10 18:07:12.977 WUI[getProperty()] Getting property WUC_BEAN_VERSION
2008-janv.-10 18:07:12.977 WUI[getProperty()] Value of WUC_BEAN_VERSION=10.1.2.2
2008-janv.-10 18:07:12.993 WUT[setProperty()] Setting property WUC_SRV_LOGGING to 0
2008-janv.-10 18:07:12.993 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.jacob.dll
2008-janv.-10 18:07:12.993 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2008-janv.-10 18:07:13.08 WUT[loadSettings()] Local properties file loaded
2008-janv.-10 18:07:13.08 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2008-janv.-10 18:07:13.08 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.JNIsharedstubs.dll
2008-janv.-10 18:07:13.08 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2008-janv.-10 18:07:13.08 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2008-janv.-10 18:07:13.08 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.d2kwut60.dll
2008-janv.-10 18:07:13.08 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2008-janv.-10 18:07:13.08 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2008-janv.-10 18:07:13.24 WUB[setProperty()] Setting property WUC_SRV_LOGGING to 0
AFTER PUSH ON THE BUTTON THAT CALL THE SAME FUNCTION
2008-janv.-10 18:07:34.758 WUF[setProperty()] Setting property WUF_FILENAME to c:\temp\1.txt
2008-janv.-10 18:07:34.758 WUF[setProperty()] Setting property WUF_FILE_ATTRIBUTE to 1
2008-janv.-10 18:07:34.758 WUF[getProperty()] Getting property WUF_FILE_ATTRIBUTE
2008-janv.-10 18:07:34.758 WUF[getProperty()] Value of WUF_FILE_ATTRIBUTE=TRUE

Oracle.forms.webutil bean not found at forms initialization

I'm trying to use the function Webutil_File.File_is_Directory
But i'm getting the following error:
oracle.forms.webutil.file.FileFunctions bean not found.
WEBUTIL_FILE.GET_ATTRIBUTE_INT will not work.
I believe this is not a configuration issue because
this error only happens at forms initialization.
I put this call at a WHEN-NEW-ITEM-INSTANCE, at the forms initialization, the error happens.
But when the form is waiting a user action, and the user raises the same WHEN-NEW-ITEM-INSTANCE,
the function works as expected.

found my solution, see thread:
auto start other form

Beans not found

Hi All,
Trying to configure the webutil, running on windowsNT, but couldn't make it work....facing following problems,
1- Tried to sing the webutil and jacob files but it throws error that
...could not find java.dll
...could not find java 2 runtime envoirment
But the java.dll is available in <ORACLE_HOME>\jdk\jre\bin
and <JAVA_HOME>\jre\bin
and while signing the jar file after backingup the file it gives error that syntax of command is invalid
... However finally it still displays message that successfully signed the fiels ???
2- After this I thought to try the webutil anyway....generated the .plx, Attached the webutil .pll and olb respectively but while try to open the dialog boc through when_button_press trigger get error about webutil bean not found.
None of the webutil function is working....it ends up with error message the bean not found and respective function will not performed.
Any clue guys...It has driven me crazy.
Thaning you and best regards.

Hi Friends,
Just find out why its reading the wrong path... Actually I have installed the JDK 1.4.2 on this machine, It that PATH that sign_webutil script is picking up for search where is actual path string it is searching is the one defined in Oracle Home.
So guys any tips on this what should I do, uninstall the java from this machine? I am still not able to sign the frmwebutil.jar and jacob.jar even after pointing the Java home to <oracle_home>\jdk\jre
It throws an exception that
Exception in thread "main" java.lang.NoClassDefFoundError: sun/sercurity/tools/jarSigner
Any help pointing to solution, will be appriciated. Best Regards
Message was edited by:
inamhaque

WebUtil: oracle.forms.webutil.host.Host bean not found

Hi. This is my first attempt using WebUtil. The following code is in my When-New-Form-Instance trigger:
client_host('N:\TTMS\ITS\vbasic\compiled\MenuUpdate.exe');
This is the error I receive:
oracle.forms.webutil.host.Host bean not found
I've included my formsweb.cfg below for your reference. Note that the application is using the [ttmsmenu] configuration.
Thanks in advance for your help with this problem.
***FORMSWEB.CFG***
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
#WebUtilArchive=frmwebutil.jar,jacob.jar
#WebUtilLogging=off
#WebUtilLoggingDetail=normal
#WebUtilErrorMode=Alert
#WebUtilDispatchMonitorInterval=5
#WebUtilTrustInternal=true
#WebUtilMaxTransferSize=16384
# System parameter: default base HTML file
baseHTML=base.htm
# baseHTML=webutilbase.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# baseHTMLjinitiator=webutiljini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# baseHTMLjpi=webutiljpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
# HTMLbeforeForm=
HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT>
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
#imageBase=DocumentBase
imageBase=codeBase
# Forms applet parameter default 750
# width=1000
# width=100%
width=500
# Forms applet parameter default 600
# height=700
# height=100%
height=500
# Forms applet parameter default false
separateFrame=true
# Forms applet parameter
# splashScreen=
splashScreen=no
#splashScreen=ttmslogo_new.gif
# Forms applet parameter
background=ttmslogo_new.gif
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=ttms_banner.gif
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=C:\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ttmsmenu]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
width=500
height=500
background=no
form=ttmsmenu.fmx

Dumb dumb dumb.
I was running this form out of Form Builder 10g. At some point I changed the Application Server URL (Edit => Preferences => Runtime menus) from:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?config=ttmsmenu
to:
http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?
So my customized configuration with all the WebUtil references was not being referenced and I was getting the error.
Dumb dumb dumb.

Oracle.forms.webutil.cApi.CApiFunctions bean not found.WEBUTIL_C_API.REBIND

Hi,
I have installed oracle application server 10g on server .Configured webutil in server. Am using Mac OS X as client machine.But i got error
" oracle.forms.webutil.cApi.CApiFunctions bean not found.WEBUTIL_C_API.REBIND_PARAMETER will not work "
Can you please assist in correcting this error...
Urgent PLS...
Thanks.

Is the webutil.olb file accesible to the Form when you try to compile ?.

Oracle.forms.webutil.capi.capifunctions bean not found

Hi...I'm trying to pick host name using webutil through the following command behind a push button in my form:
:Pc_Nom := Webutil_Clientinfo.Get_Host_Name;
But it gives the following error:
oracle.forms.webutil.capi.capifunctions bean not found
webutil_c_api.rebind_parameter will not work.
Can u tell me where is the problem???

Hi!
Do you have referenced the webutil object group from the webutil.olb?
Take a look in the java console if webutil is registred.
Regards

Webutil form giving error "oracle.forms.webutil.* bean not found.

i have done all settings as per given in documentation of webutil.
forms is compiling but at runtime it gives error:
oracle.forms.webutil.clientinfo.getclientinfo bean not found.
what could be the reason.plz. help.
shikha...

Hi Shika,
Probably, the issue could be because of any one of the following.
 
 
1. Check whether you have added $OARCLE_HOME\forms90\java\frmwebutil.jar in the default.env under $ORACLE_HOME\Forms90\server folder.
 
 
2. Check whether you have added the virtual directory
<virtual-directory virtual-path="/webutil" real-path="$OARCLE_HOME/forms90/webutil" />
in the file orion-web.xml under $ORACLE_HOME\j2ee\DevSuite\application-deployments\forms\forms90web folder
<bCorrectly
 
 
HTH.
 
Regards,
 
Arun

Oracle.forms.webutil.browser.BrowserFunctions bean not found [SOLVED]

Hi. We develop our 10g forms on the Windows side and then deploy then on our UNIX server.
I have an application that compiles and runs fine when deployed on the UNIX-side of things, but when I attempt to run it on the Windows-side of things I get the error:
oracle.forms.webutil.browser.BrowserFunctions bean not found. WEBUTIL_SEPARATEFRAME. IsSeparateFrame will not work.
If I acknowledge this message then the form continues to run, but if it attempts to execute the WebUtil Client_Host functionality then I get the error:
oracle.forms.webutil.browser.BrowserFunctions bean not found. WEBUTIL.HOST.Execute will not work.
Any suggestions as to what I might have messed up configuration-wise on the Windows-side of things? Any help would be greatly appreciated!

Ugh. I wasn't pointing to the WebUtil configuration. All good now.

WebUtil Error Bean Not Found

Dear All,
i am facing a problem of running webutil functions. I have compiled my webutil.pll and then attach to my form and then i copy the webtuil.olb objects into my
form and i created one button on my form to show the calculator the code is as follows
Note: i have webutil.cfg in my classpath of default.env file and i signed both webtuil.jar and jacob.jar successfully but still i am facing error.
e.g;
when-button-press
webutil_host.host('calc.exe');
error: oracle.forms.webutil.host HOST bean not found.
WEBUTIL_HOST.execute will not work.
Thanks.
Immediate help will be appreciated....

Hi,
Have you entered the webutil values in the formsweb.cfg file?
e.g. WebUtilConfig=<somewhere>\WebUtil\server\webutil.cfg
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilErrorMode=Alert
WebUtilConfig=<somewhere>\WebUtil\server\webutil.cfg
baseHTMLjinitiator=<somewhere>\WebUtil\server\webutiljini.htm
baseHTMLjpi=<somewhere>\WebUtil\server\webutiljpi.htm
baseHTML=<somewhere>\WebUtil\server\webutilbase.htm
Hopefully this may help you.
L :-)

Oracle.forms.webutil.clientinfo.getclientinfo bean not found

Hi,
oracle.forms.webutil.clientinfo.getclientinfo bean not found
this is the message iam getting when i implement my forms10g application with WEBUTIL.PLL library to export data form forms10g application to excel

Hello,
if you get this message in a WHEN_NEW_FORM_INSTANCE trigger:
Re: oracle.forms.webutil.file Transfer.File Transfer bean not found
or
Re: WebUtil doesn't work when called from WHEN-NEW-FORM-INSTANCE trigger
Regards
Franz

Webutil-- oracle.forms.webutil.browserFunctions bean not found

hi friends,
im in great trouble
i got assignment from company and its very urgent
i want to change coffee cup of browser window...i m trying to use webutil, i have done following things
1.I have developer suit 9.0.4
2.I have Jinitiator1.3.1.17
3.download and unzip webutil_106 in forms90 folder
4.adding frmwebutil.jar in forms90_BUILDER_CLASSPATH
5.Create single virtual directory in orion web.xml and in forms90.config file
6.add frmwebutil.jar in formsweb.cfg and replace webutil.htm files e.g bashtml,basehtmljinitiater,basehtmljpi.
7.webutil entries in envirmnent file
8.attatch liabray webutill.pll with my form,
9. open webutil.olb and copy it into object group
10.create timer at when new_form_instance
11.on timer expiratation using following code
     if WEBUTIL_SEPARATEFRAME.IsSeparateFrame then
                                        WebUtil_SeparateFrame.SetTitle('DTS');
                                        webUtil_SeparateFrame.SetIcon('execute.gif');
and restart oc4j
but problem is still comming when timer expire i got following message
oracle.forms.webutil.browserFunctions bean not found
plz anyone help if im missing any step or doing something wrong
thanks

hi friends,
im in great trouble
i got assignment from company and its very urgent
i want to change coffee cup of browser window...i m trying to use webutil, i have done following things
1.I have developer suit 9.0.4
2.I have Jinitiator1.3.1.17
3.download and unzip webutil_106 in forms90 folder
4.adding frmwebutil.jar in forms90_BUILDER_CLASSPATH
5.Create single virtual directory in orion web.xml and in forms90.config file
6.add frmwebutil.jar in formsweb.cfg and replace webutil.htm files e.g bashtml,basehtmljinitiater,basehtmljpi.
7.webutil entries in envirmnent file
8.attatch liabray webutill.pll with my form,
9. open webutil.olb and copy it into object group
10.create timer at when new_form_instance
11.on timer expiratation using following code
     if WEBUTIL_SEPARATEFRAME.IsSeparateFrame then
                                        WebUtil_SeparateFrame.SetTitle('DTS');
                                        webUtil_SeparateFrame.SetIcon('execute.gif');
and restart oc4j
but problem is still comming when timer expire i got following message
oracle.forms.webutil.browserFunctions bean not found
plz anyone help if im missing any step or doing something wrong
thanks

WebUtil - oracle.forms.webutil.ole.oleFunctions bean not found.

All,
We're using webutil 1.0.6 on forms 9.0.4. Stuck up with the following error at runtime 'oracle.forms.webutil.ole.oleFunctions bean not found.'.
In metalink, we noticed that webutil 1.0.6 should't be used with 9.0.4 unless some modification made on PLL. Unfortunately in OTN we can't find webutil 1.0.5 source version.
Anyone please tell us from where we can get WebUtil 1.0.5 source or how can we solve this problem.
Thank you very much.
Prabhu.

Hi,
I have encountered the same problem. Form compiled with no error, but at run time got an error 'oracle.forms.webtuil.ole.oleFunctions bean not found'.
DEFAULT.ENV:
WEBUTIL_CONFIG=c:\oracle\ora92\forms90\server\webutil.cfg
WebUtilArchive=c:\oracle\ora92\forms90\java\frmwebutil.jar,c:\oracle\ora92\forms90\java\jacob.jar
FORMSWEB.CFG file:
webUtilArchive=/forms90/java/webutil.jar,/forms90/java/jacob.jar
archive_jini=f90all_jinit.jar
archive_ie=f90all.cab
archive=f90all.jar
[jpi]
baseHTML=/forms90/server/base.htm
baseHTMLjinitiator=c:\oracle\ora92\forms90\server\webutiljini.htm
baseHTMLjpi=/forms90/server/basejpi.htm
baseHTMLie=/forms90/server/baseie.htm
[webutil]
WebUtilArch=/forms90/java/frmwebutil.jar
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=/forms90/server/webutiljini.htm
baseHTMLjpi=/forms90/server/webutiljpi.htm
archive_jini=/forms90/java/f90all_jinit.jar
archive=/forms90/java/f90all.jar
lookAndFeel=oracle
ORION-WEB.XML file (ORACLE\ora92\j2ee\DevSuit\application-deployments\forms\form90web):
<context-param-mapping name="configFileName">c:\oracle\ora92/forms90/server/formsweb.cfg</context-param-mapping>
<virtual-directory virtual-path="/html" real-path="c:\oracle\ora92/tools/web90/html" />
<virtual-directory virtual-path="/java" real-path="c:\oracle\ora92/forms90/java" />
<virtual-directory virtual-path="/iconos" real-path="c:\oracle\ora92/forms90/iconos" />
<virtual-directory virtual-path="/webutil" real-path="c:\oracle\ora92/forms90/webutil" />
<virtual-directory virtual-path="/jinitiator" real-path="c:\oracle\ora92/jinit" />
Please help!
Thank you

Oracle.forms.webutil.file.FileFunctions bean not found. WEBUTIL_FILE.FILE_D

Hi guys,
I have updated my AS and DS to 10.1.2.3 and downloaded Wbutil 1.6 update 10.
I configured all the .cfg files as mentioned in the documentation when I launch a test form with config=webutil and a webutil functionality in it then i am getting following error -
oracle.forms.webutil.file.FileFunctions bean not found.
WEBUTIL_FILE.FILE_SELECTION_DIALOG_INT will not work.
Java console shows following -
java.lang.ClassNotFoundException: oracle.forms.webutil.clientInfo.GetClientInfo
Caused by: java.io.IOException: open HTTP connection failed:http://abhamare-2k.cybage.com:7778/forms/java/oracle/forms/webutil/clientInfo/GetClientInfo.class
java.lang.ClassNotFoundException: oracle.forms.webutil.file.FileFunctions
Caused by: java.io.IOException: open HTTP connection failed:http://abhamare-2k.cybage.com:7778/forms/java/oracle/forms/webutil/file/FileFunctions.class
java.lang.ClassNotFoundException: oracle.forms.webutil.host.Host
Caused by: java.io.IOException: open HTTP connection failed:http://abhamare-2k.cybage.com:7778/forms/java/oracle/forms/webutil/host/Host.class
java.lang.ClassNotFoundException: oracle.forms.webutil.session.SessionFunctions
Caused by: java.io.IOException: open HTTP connection failed:http://abhamare-2k.cybage.com:7778/forms/java/oracle/forms/webutil/session/SessionFunctions.class
and so on..
Some how my java console too has stopped showing up after mistakingly clicked Hide Console.
So can any one help me to get out of this error.
Its sort of driving me crazy.
Thanks in advance.
Av.

Hi Av, Can you let me know what you did to fix this issue? We are facing a serious issue with the same error and we can't get around it.
Thanks
Sam.

Oracle.forms.webutil.file Transfer.File Transfer bean not found

I've followed tons of instructions for 2 days to install and configure webutil and I finally have success with the demo. However, when I add this to my own form and use the CLIENT_IMAGE.READ_FILE_IMAGE
I end up with error oracle.forms.webutil.file Transfer.File Transfer bean not found WEBUTIL_FILE_TRANSFER.getMaxTransfer will not work.
What am I missing? Thanks for any help.

Make sure your form subclasses object group webutil.olb, and that webutil.pll is also attached. Make sure that your forms folder contains webutil.plx (a compiled version of webutil.pll). Unless the default config (in formsweb.cfg) includes the entries required for webutil support, you must specify a config that does have these entries. 10g, which comes configured for webutil, provides a config called webutil for this. An example URL might look like:
http://myappserver/forms/frmservlet?form=myform.fmx&config=webutil
There could be other problems, but since you're able to run the demo forms, I'm guessing that what I've mentioned are the first things for you to check.
Hope this helps,
Eric Adamson
Lansing, Michigan

WebUtil - Bean Not Found

Similar Messages

Maybe you are looking for