Webutil configuration file

hello,
i am trying to run a form using webutil on appliaction server. i get a dailog box for webutil configuration but its empty.. ITS NOT DOWNLOADING ANY WEBUTIL FILES

hello priya,
ya when i try to run the form using webutil a webutil configuration dalilog box comes up with no entries it and press ok button and the form opens up normal.
but i solved that problem by setting the formsweb.cfg file in server for the application i am using.
so now that problem is fine. the webutil files comes up in the dailog box.
but now another problem. i have a button by click of which i am sending mails. i have the OLE2 concept. and it works very fine in client/server but when i try from application server it doesnt work .. it's giving me error ora-305500.
then i understood we have to use client_ole2 which comes with webutil to run it on client and now no ora305500 error.
but now when i press teh button it does nothing and no error too and doesnt send mails also.
any idea.. reply soon..
with luv,
munira
w
any idea?????

Similar Messages

WUC-5 No WebUtil Configuration File specified

Hello
In my Company, we use to use Oracle 6i as Forms and Oracle 8i as Database but we look forward to migrate to Oracle 9i (Database & Forms).
The migration was done successfully but I need to get some Client information, so I have found the WebUtil Utility.
I have read the document "WebUtil Familiarisation Manual" and I have applied it step by step but there is one problem, I could not set the following variables:
baseHTMLjpi=c:\webutil\server\webutiljpi.htm
and
baseHTML=c:\webutil\server\webutilbase.htm
And this is because I simply did not found these files in this location that I had installed from "webutil_102.zip" or in any other location on the server.
So I skipped this step and I continued. The rest was done successfully.
At the runtime of my form and when I have executed one of WebUtil functions the error WUC-5 appears.
Checked points:
- The webutil.pll is attached correctly as well as webutil.olb is subclassed correctly.
- In oracle/forms90/server/formsweb.cfg, there are some variables that I have to set like:
a- webutilarchive=/forms90/webutil/webutil.jar (webutil.jar is found and webutil is a virtual directory that maps onto c:\webutil\lib)
b- basehtmljinitiatior=c:\webutil\server\webutiljini.htm
(This file is found)
- All the steps are successfully done except the settings of the two variables mentioned below
Research made:
I have downloaded the "WU_test.fmb" from this site for testing. At runtime, an error is occurred:
"FRM-47023: No such parameter named WEBUTILCONFIG exists in form WU_TEST."
So I putted "OK" and then the error WUC-5 appears also.
It is definitely from the configuration of the WebUtil in formsweb.cfg because as I have read in the Manual the declaration of the variables BaseHTMLjpi and BaseHTML is required
Hoping u answer me very soon, it is really urgent.
Thanks

Hello
I have found the jdk directory and I have set the parameter JDK_HOME in signer.properties with the path of the jdk directory.
At runtime of the form WU_TEST, the "Jinitiator security warning" appears, so i have putted "Grant always". The form appears with the error below:
FRM-47023: No such parameter named WebUtilConfig exits in form WU_TEST
Ive putted ok and another error appears:
WUC-5: No WebUtil Configuration File specified
Ive putted ok and another error appears:
FRM-40105: Unable to resolve reference to item Parameter.WebUtilConfig
Ive putted ok and another error appears:
FRM-40735: When-Custom-item-event trigger raised unhandled exception ORA-06503
Ive putted ok and the first 3 errors reappear.
When Ive pressed the button "Get Client info" in the form WU_TEST, the first 3 errors reappears but the 2 items (User Name and IP Address) are filled with values.
Thanks for helping me and telling me what to do next

Error WUC-5 No WebUtil configuration file specified

hi all
suddenly i got the following error in my java console i google and did not find the solution.
Did someone face the same problem ever?
please help me out thanks in advance.
Loading http://xp:8889/forms90/java/frmwebutil.jar from JAR cache
Loading http://xp:8889/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.6
Loading http://xp:8889/forms90/java/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 9.0.4.0
2010-Apr-15 18:52:30.406 ERROR>WUC-5 [WebUtil_Core.PopulatePropertyBundle] No WebUtil configuration file specified
Exception occurred during event dispatching:
java.lang.UnsatisfiedLinkError: no jacob in java.library.path
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at com.jacob.com.Dispatch.<clinit>(Dispatch.java:537)
     at oracle.forms.webutil.ole.OleFunctions.create_obj(OleFunctions.java:398)
     at oracle.forms.webutil.ole.OleFunctions.getProperty(OleFunctions.java:189)
     at oracle.forms.handler.UICommon.onGet(Unknown Source)
     at oracle.forms.engine.Runform.onGetHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)Form 10G R1.
i found this.
Re: WUC-5 error
sarah

done thank for everyone.
i modified webutil.cfg and modified the class-path(default.env)

WebUtil error: WUC-6: Unable to read WebUtil configuration file

Dear Colleague,
I received the following error:
WUC-6: Unable to read WebUtil configuration file
c:\OraHome_BIForms\forms\server\webutil.cfg
In the meantime, I have verified that my default.env file contains the following path definition:
# webutil config file path
WEBUTIL_CONFIG=C:\OraHome_BIForms\forms\server\webutil.cfg
What is wrong here? Does "unable to read..." mean that the file security settings do not allow read access to the webutil.cfg file?
I would appreciate any advice you can give me.
Thank you and kind regards,
Randy

In the meantime, I have figured out the solution to my problem.
The webutil.cfg file was not in the directory that was being pointed to in the path parameter.
Regards,
Randy

What values to place in signer.properties file for Webutil configuration

Hi. I'm not sure of what value to place in JDK_HOME in signer.properties for Webutil configuration. My current settings are:
JDK_HOME=D:\ora9i\jdk
JINIT_HOME=C:\Archivos de programa\Oracle\JInitiator 1.3.1.13
#Certificate settings:
# These are used to generate the initial signing certificate
# Change them to suite your organisation
DN_CN=Product Management
DN_OU=Development Tools
DN_O=Oracle
DN_C=US
JAR_KEY=webutil
JAR_KEY_PASSWORD=webutil
Is JDK_HOME the jdk for oracle or SDK for windows machine(how to find?)?. Also how do i repeat the process of makecert and signing of webutil.jar and jacob.jar?. If i try to repeat this process I get the following warnings or error?
Makecert:
keytool error: java.lang.Exception: Key pair not generated, alias <webutil> already exists
Certificate created...

JDK_HOME is just the location of a Java distribution with Keytool in it - have a look at the signer batch file and you'll see how each variable is used. Also if you run keytool from the command prompt it will show you the commands to delete and existing Key or list the keys that are currently stored.

11gR2- webutil upload file to AS on two nodes RAC?

Hellow experts plz help with the following issue,
we are using 11gR2 forms on two node rac,webutil configured on both nodes. upload/download files to AS folder(UP_FILES) using our forms. node 2 is actually replica of node 1(forms,reports,UP_FILES). we are now facing a problem that the form which upload file to AS, only upload that to the node from where it is running say if it is running from node1 then it upload files to folder UP_FILES on that node( as the entry in webutil.cfg file) but we want that UP_FILES folder should be synced with each other on both nodes and a form running whether from node1 or node2 upload the file to both nodes at time.
How this will be accomplished?
--------webutil.cfg entry
transfer.appsrv.read.3=D:\UP_FILES
transfer.appsrv.write.3=D:\UP_FILES
-----FORM UPLOAD CODE
      IF :CONTROL.FILE_LOC IS NOT NULL THEN
        acyr3 := :CONTROL.TXTVOUCHERNO||'-'||acyr2 ;
       FILE_RESULT := WEBUTIL_FILE_TRANSFER.CLIENT_TO_AS_WITH_PROGRESS(CLIENTFILE=>:CONTROL.FILE_LOC,
       SERVERFILE =>'D:\UP_FILES\'||acyr3||'.PDF',
      PROGRESSTITLE=>'UPLOAD TO DATABASE IN PROGRESS',
      PROGRESSSUBTITLE=>'PLEASE WAIT' );
      END IF;
--FORM DOWNLOAD CODE
        FILE_RESULT := WEBUTIL_FILE_TRANSFER.AS_TO_CLIENT_WITH_PROGRESS
             CLIENTFILE=>'D:\UP_FILES\'||acyr3||'.PDF',
        SERVERFILE =>'D:\UP_FILES\'||acyr3||'.PDF',
      PROGRESSTITLE=>'DOWNLOAD FROM DATABASE IN PROGRESS',
      PROGRESSSUBTITLE=>'PLEASE WAIT'
             CLIENT_HOST('rundll32.exe url.dll,FileProtocolHandler D:\UP_FILES\'||acyr3||'.PDF');
             IF FILE_RESULT THEN
message('File downloaded successfully from the Application Server');
END IF;

Well, you're uploading the file to one node, so this is no surprise. What you can do is to store your file on a shared folder (which might be a bit tricky on windows) or synchronize a folder between your nodes. Unfortunately Forms can't access ASM directly (assuming you are using ASM), so you can't store your files directly in ASM where it would be accessible from both nodes.
cheers

Webutil configuration for jre, Forms 10g in windows 7 application server

hi all,
we are recently upgraded the application server with new os windows7. and clients ae also upgraded with windows7.
we are using forms 10g(developer suite 10g). and installed jre6 instead of jinitiator and did the all needful changes in formsweb.cfg. and ialready installed ofiice-2003(for excel)
but we are unable to run reports in excel format*. while we select the repotr type is exel in list item
and click ok button the following error is coming
oracle.forms.webutil.ole ole functions bean not found
client_ole2.create_obj will not work.
=====================
the following is the webutil configuration in formsweb.cfg
=====================
[webutil]
archive=frmall.jar,frmwebutil.jar,jacob.jar
archive_jini=frmall_jinit.jar,frmwebutil.jar,jacob.jar
#,f90all_jinit.jar
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=basejpi.htm
baseHTMLjpi=webutiljpi.htm
baseHTML=webutilbase.htm
#baseHTML=webutiljpi.htm
lookAndFeel=Oracle
if any changes in the configuration and jre files.please mention it.
kindly help me how to resolve this problem
thank you
Edited by: vamsi on 3 Jan, 2012 12:59 AM
Edited by: vamsi on 3 Jan, 2012 1:21 AM
Edited by: vamsi on 3 Jan, 2012 1:21 AM

See my comments in this post:
java.lang.ClassNotFoundException: oracle.forms.webutil.ole.OleFunctions
and this one:
webutil.cfg for win-7 64 bit client

WebUtil Configuration

Hi,
We have installed the WebUtil and are experiencing the WUC-015 error with function OLEFunctions.
Based on your recommendation, you say to inclde the baseHTMLjpi and baseHTML values to webutiljpi.htm and webutilbase.htm respectively. However, when I look into my WebUtil directory where I installed the software, I do not have these htm files. I only have the webutiljini.htm. So the question is, do I really need this? If so, can you please tell me where I could get them, or send them to [email protected]
Your assistance is greatly appreciated,
jb

Hi!!!
I am getting error
Oracle Forms Web CGI: Error detected
Your request cannot be serviced at this time due to the following error:
ERROR: Configuration file has '=' missing from name=value pair.
My formsweb.cfg file is given below , Kindly help me to remove the error
; Forms Web CGI Configuration File
; This file defines parameter values used by the Forms Web CGI
; PARAMETER VALUES USED BY DEFAULT
; SYSTEM PARAMETERS
; These have fixed names and give information required by the Forms
; Web CGI in order to function. They cannot be specified in the URL query
; string. But they can be overriden in a named configuration (see below).
;baseHTML=base.htm
;baseHTMLJInitiator=basejini.htm
;baseHTMLjpi=baseiejpi.htm
;basehtmlie=baseie.htm
baseHTMLJinitiator=webutiljini.htm,base.htm
baseHTMLjpi=webutiljpi.htm,baseHTMLjpi.htm
baseHTML=webutilbase.htm, baseHTML.htm
; The following two parameters only apply when using the Listener Servlet.
; WorkingDirectory defaults to <oracle_home>/forms60 if unset.
workingDirectory=
envFile=default.env
HTMLdelimiter=%
IE=JInitiator
MetricsServerPort=9020
MetricsServerErrorURL=
; The next parameter specifies how to execute the Forms applet under
; Microsoft Internet Explorer 5.0. Put IE50=native if you want the
; Forms applet to run in the browser's native JVM.
#IE50=native
#; IE50=JInitiator
; USER PARAMETERS
; These match variables (e.g. %form%) in the baseHTML file. Their values
; may be overridden by specifying them in the URL query string
; (e.g. "http://myhost.mydomain.com/ifcgi60.exe?form=myform&width=700")
; or by overriding them in a specific, named configuration (see below)
; 1) Runform arguments:
form=test.fmx
userid=
otherparams=
debug=no
; 2) HTML page title, attributes for the BODY tag, and HTML to add before and
; after the form:
pageTitle=Oracle Forms Server
HTMLbodyAttrs=
HTMLbeforeForm=
HTMLafterForm=
; 3) Values for the Forms applet parameters:
width=650
height=500
separateFrame=true
splashScreen=no
; select default background by not specifying a value
background=
lookAndFeel=Oracle
colorScheme=teal
serverApp=default
separateFrame=false
serverPort=9000
serverHost=localhost
serverURL=
codebase=/forms60/java
archive_jini=f60all_jinit.jar,frmwebutil.jar
archive_ie=f60all.cab
connectMode=Socket
archive=f60web.jar
webUtilArchive=frmwebutil.jar
archive=f60all.cab
serverapp=default
networkRetries=0
; 4) Parameters for JInitiator
; Page displayed to Netscape users to allow them to download JInitiator.
; If you create your own version, set this parameter to point to it.
jinit_download_page=/jinitiator/us/jinit_download.htm
; Parameters related to the version of JInitiator.
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
jinit_exename=jinit.exe#Version=1,3,1,22
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
; SPECIFIC CONFIGURATIONS
; You may define your own specific, named configurations (sets of parameters)
; by adding special sections as illustrated in the following examples.
; Note that you need only specify the parameters you want to change. The
; default values (defined above) will be used for all other parameters.
; Use of a specific configuration can be requested by including the text
; "config=<your_config_name>" in the query string of the URL used to run
; a form. For example, to use the sepwin configuration, your could issue
; a URL like "http://myhost.mydomain.com/ifcgi60.exe?config=sepwin".
; Example 1: configuration to run forms in a separate browser window with
; "generic" look and feel (include "config=sepwin" in the URL)
[sepwin]
separateFrame=True
lookandfeel=Generic
; Example 2: configuration affecting users of MicroSoft Internet Explorer 5.0.
; Forms applet will run under the browser's native JVM rather than
; using Oracle JInitiator.
[ie50native]
IE50=native
; Example 3: configuration forcing use of the base.htm base HTML file in all
; cases (means applet-style tags will always be generated and
; JInitiator will never be used).
[applet]
baseHTMLJInitiator=
[vp]
separateFrame=True
lookandfeel=Generic
background=no
width=100%
height=100%
pageTitle=IMax Technologies
form=E:\rachna\ppc-forms\login.fmx
userid=ars1/ars1@orcl
[iqent]
separateFrame=True
lookandfeel=Generic
background=no
width=100%
height=100%
pageTitle=IMax Technologies
form=E:\rachna\ppc-forms\sl_mst_city1.fmx
userid=iqent/iqent@orcl
[webutil]
WebUtilArchive=frmwebutil.jar
WebUtilLogging=on
WebUtilLoggingDetail=normal
WebUtilErrorMode=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=f60all_jinit.jar
archive=frmwebutil.jar,f60all_jinit.jar
lookAndFeel=oracle
[webutilie]
IE=native
webUtilArchive=frmwebutil.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTML=webutilbase.htm
baseHTMLie=webutilbase.htm
archive=frmwebutil.jar,f60all_jinit.jar
lookAndFeel=oracle
[webutiljpi]
webUtilArchive=frmwebutil.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljpi.htm
baseHTMLjpi=webutiljpi.htm
baseHTMLie=webutiljpi.htm
baseHTML=webutiljpi.htm
archive=frmwebutil.jar,f60all_jinit.jar
lookAndFeel=oracle

Webutil Creating file on Client issue

we are planning to us webutil. But when writing file to client is ok for us to write 50 lines but as we write more lines to file on client run success fully but file remains empty nothing written to file. and next call to use of webutil functionality forms hangs. and we have to kill browser to get back browser.
Is there any parameter in webutil configuration that control size of file to written on client.
Creating file and then transferring works great

I was having the same problem as the original poster: Using WebUtil.client_text_io to write a file to the client that had more than a handful of lines. The file would appear on the disk, but the file size stayed at 0. It did not appear to throw an error, but the next time a WebUtil call was made, the entire client hung and became non-responsive.
I tried your suggestion below, where the file is written on the server and transferred to the client using the WebUtil file transfer ability. It worked great, and it is fast. Thanks!
--Tara

WUC-5 No webtil configuration File specified

Hi,
I have a problem using Webutil.
It gives me "WUC-5 No webtil configuration File specified" while running the form.
The formsweb.cfg, webutil.env and all locations(in configuration files and classpath) are fine and
Java Console output is
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 90290
java.lang.ClassNotFoundException:oracle.forms.webutil.clientInfo.GetClientInfo
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
and so on ...
I'm working on winXP and Forms (32) 9.0.2.9.0
It would be really appreciated if somebody helps me out.
Regards,
Ali

Hi,
double check your configfuration settings and compare them with the configurations mentioned in the documentation. If webutil.cfg can't be found then the archives wont be either.
Frank

WebUtil Configuration Issue

I have successfully configured my IDS for WebUtil, but
have been unable to accomplish same for iAS10g, while
following the documentation and the various threads on
this forum. My forms configuration works if I use a
config= with NO webutil involved, but with WebUtil in the
picture, it fails. All the details are as follows:
WebUtil is installed physically at d:\OraAsMTier\forms90\webutil
The configuration has been double checked against documentation and
forum posts/responses. The jacob.jar file has been installed, signed
and configured. Configuration elements are included below.
JVM Console Output (Chopped to conserve lines)
Oracle JInitiator: Version 1.3.1.18
Using JRE version 1.3.1.18-internal Java HotSpot(TM) Client VM
------ <chopped> ------
JAR cache enabled
Location: C:\Documents and Settings\hankf\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
------ <chopped> ------
java.net.SocketException: Connection reset by peer: JVM_recv in socket input stream read
     at java.net.SocketInputStream.socketRead(Native Method)
------ <chopped> ------
WARNING: Unable to cache http://msiasvr.tmspc.internal/forms90/webutil/webutil.jar
Loading http://msiasvr.tmspc.internal/forms90/webutil/jacob.jar from JAR cache
load: class oracle.forms.webutil.common.RegisterWebUtil not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
------ <chopped> ------
java.lang.NullPointerException
     at sun.net.www.http.ChunkedInputStream.readChunkSize(Unknown Source)
------ <chopped> ------
Configuration elements added to files for WebUtil
In file: forms90.conf
# 04/29/2005 Added this alias to map the WebUtil utility package
AliasMatch ^/forms90/webutil/(..*) "D:/OraAsMTier\forms90\webutil/lib/$1"
In file: formsweb.cfg
# A separate section in formsweb.cfg is used to configure webutil for testing
# That (trimmed to conserve lines) section follows:
[MS_MKTNG_WEBUTIL]
# System parameter: default base HTML file
baseHTML=d:\OraAsMTier\forms90\webutil\server\webutilbase.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=d:\OraAsMTier\forms90\webutil\server\webutiljini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=d:\OraAsMTier\forms90\webutil\server\webutiljpi.htm
# System parameter: base HTML file for use with Microsoft Internet Explorer
# (when using the native JVM)
baseHTMLie=baseie.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=E:\MsApObje10g\Bin
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# System parameter: JVM option for Microsoft Internet Explorer.
# This parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x or above. Put IE=native if you want
# the Forms applet to run in the browser's native JVM.
IE=JInitiator
------ <chopped> ------
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=codeBase
------ <chopped> ------
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar,icons.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=f90all.jar
------ <chopped> ------
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,18
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.18
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
------ <chopped> ------
# Parameter which tells App server where to find the JAR file for the WebUtil utility package. WebUtil is from Oracle, and provides pre-coded routines to replace missing client-side Client-Server functionality, like text io, file read-write, etc.
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
In file default.env:
FORMS90_PATH=E:\MsApObje10g\bin;d:\OraAsMTier\forms90;d:\OraAsMTier\forms90\webutil\forms
PATH=d:\OraAsMTier\bin;d:\OraAsMTier\jdk\jre\bin\client
CLASSPATH=d:\OraAsMTier\forms90\webutil\lib\webutil.jar;d:\OraAsMTier\jdk\jre\lib\rt.jar;d:\OraAsMTier\j2ee\OC4J_BI_Forms\applications\forms90app\forms90web\WEB-INF\lib\f90srv.jar;d:\OraAsMTier\jlib\repository.jar;d:\OraAsMTier\jlib\ldapjclnt9.jar;d:\OraAsMTier\jlib\debugger.jar;d:\OraAsMTier\jlib\ewt3.jar;d:\OraAsMTier\jlib\share.jar;d:\OraAsMTier\jlib\utj90.jar;d:\OraAsMTier\jlib\zrclient.jar;d:\OraAsMTier\reports\jlib\rwrun.jar
WEBUTIL_CONFIG=d:\OraAsMTier\forms90\webutil\server\webutil.cfg
In file webutil.cfg
# No changes. File is default included with download of V1.05
In the browser (Netscape 7.2) I get Applet
oracle.forms.engine.main notinited
and that's it. Nothing in logs anywhere on the
application server anywhere, although logging and tracing
for forms are configured.
I have checked many times my configuration against all the
notes and documents and posts I can find, but I have to be
overlooking something. Any assistance is greatly
appreciated.
Thanks
Hank

Additional information: Thinking there might be a problem
with the signing of the jar files, I re-signed both
webutil.jar and jacob.jar with the original certificate
created the first time I signed them. When testing my forms
app the java console indicated the same errors for webutil
as reported previously, but it did note that jacob.jar was
out of date, and re-downloaded it. Both jacob.jar and
webutil.jar are in the exact same physical folder on the
AppServer filesystem: D:\OraAsMTier\forms90\webutil\lib
where jacob.jar refreshed properly and webutil download
failed with the error "java.net.SocketException:
Connection reset by peer: JVM_recv in socket input stream
read...". In case it is helpful.
Thanks
Hank

Imac is no longer able to open the Configuration file

Hi ,
I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
I tried using the Airport Setup assistant (imac), I received this message:
"Appropriate Airport hardware was bot found on this computer,if you recently
Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
The imac does not have a card, nor do i think it needs one.
I would like to be able to at least open the configuration file.
Thank you for reading my post.
Eme
Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.4)

Hi Kes, a star for the company !
I made an error on my first post I have a Netopia modem, Airport router.
And so it remains, i guess that there must be an easy answer somewhere
that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
Good luck,w/ this Q.
regards Eme
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5)

No dsn is present in the configuration file in the reporting services 2008

HI i have found this error in the log file of my reporting services ,
when i comes to the Configuration file in that
my DSN path is empty no input code is there in that DSN tags
<DSN>
<DSN/>
it shows the empty tags,
and my Current Report Server Report Credentials are Windows,Service account credentails
will it take the problem or what
We have repair the BIDS setup also still not able to solve my issue.
once this is resolved now able to send the emails using subscriptions.
pls infom abut this , i have sufferd this problem last 20 days.
Please update the above query with high priority
TanQ

Hi Ychinnari,
According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
DSN specify the database server that hosts the report server database connection string. The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
On the Database page, click Change Database.
We can create a new report server database or select an existing database, then click Next.
Connect to the instance of the Database Engine that you will use to create and host the report server database.
Specify properties used to create the database.
Specify the credentials used by the report server to connect to the report server database.
Review the information on the Summary page to verify the settings are correct, and then click Next.
Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
For detail information about Configure a Report Server Database Connection, please refer to the following document:
https://msdn.microsoft.com/en-us/library/ms159133.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Configure File Type Associations dosen't work for users

Hi EB,
Does anyones knows how to set the File Type Associations for users ? It works for me when i'm logged in as Admin but not as a user. When logged as user it always ask to configure the file associations when i open JDev and even with JDev open it does not set it. I tried to find an article about that but couldn't find any.
I'm using :
winXP SP3
JDeveloper 11g TP4
and i've sets all rights for autentified users on the folders and subfolders of JDeveloper.
Thanks

I tried going on tool>preferences>File Type .... and associate projets and source and applications files with JDev check marking "open with JDev"... it didn't worked as user... it's just not saving my settings while reopening it it's never saved... at least i've been able to associate it in my Admin account then i can go back in user account and select open file with in windows, choose JDev and check mark "always open that file with that program" only after that the association is saved in JDev... but still it open the Configuration file windows at startup with the ones i already opened with JDev checked... anyway that's not a big issue ... only that i can't save those settings by the JDev environement while logged in as a user...

Error reading configuration file

I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
[] 2012-12-20 22:46:32,176 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
[] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
          at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
          at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
          at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
          at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
          at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
          at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
          at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
          ... 7 more
Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
          at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
          at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
          at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
          at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
          ... 9 more
I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
Any ideas of why the Validator.bat can't read the configuration file?

I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
I have my license server setup (its the Protected Streaming version).
I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
I am using the local key mode to remove one more variable (I have setup a remote key server as well).
I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
DRM error Major[3363] minor:[0] NSError:(null)]
From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
Colour me frustrated

Webutil configuration file

Similar Messages

Maybe you are looking for