Webutil on Application Server 10g 10.1.2.0.2

hi all
i have downloaded the webutil_106.zip file from OTN , version 1.0.6 .
i have done the setup ... using pdf file given by download above zip file (webutil -> doc ->web_til.pdf).
After Completion of setup I run this url in browser "http://servername/forms/frmservlet?form=web.fmx&config=webutil" iam getting below error
500 Internal Server Error
Forms Servlet Error.
Missing or invalid value for baseHTML parameter.
Please check the servlet configuration to make sure this value specifies a valid file.
Could pls anybody help to solve this problem....
Thanks.
Rag

hi Rajesh...
Its not creating any log file.
I have updated in the webutil.cfg file as mentioned below
logging.file=C:\rag.log
logging.enabled=TRUE
logging.errorsonly=TRUE
logging.connections=TRUE
And also updated in the formsweb.cfg as mentioned below
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar #raghu
WebUtilLogging=All
WebUtilLoggingDetail=Detailed
WebUtilErrorMode=All
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar,icons.jar
baseHTML=webutilbase.htm
archive=frmall.jar
lookAndFeel=oracle
envFile=default.env
Still it is not creating any log files.
Is there any problem in above code and also tell me any other additional setups is required.
Thanks
rag.

Similar Messages

Using webutil in Application Server 10g

Hi,
I just configure successfully webutil with dev. suite 10g R2.
I developed form & attached webutil lebrary with it and it is working good at form builder runtime. but when i try to run the same form on Application Server10g R2 it gives me error "FRM-40039: Cannot attach library F:\Dev10g\Forms\webutil\webutil while opening the button".
I am using Dev. suite 10g R2 on windows XP plateform & Oracle Application Server 10g R2 on windows 2003 server.
Should I configure webutil manually on Application Server or configured by default? if yes, please tell me the steps to configure webutil on application server.
With best regards.

Please can u send me the details of configuring webutil on 10G AS Rel 2 on windows 2003. But I have Developer 10g Suite and 10G AS on same server machine

Problem while configuring webutil on oracle application server 10g(9.0.4)

hi,
I have configured webutil with oracle application server 10g(9.0.4).JInitiator 1.3.1.17 is installed.
I did everything according to webutil manual.Then i developed a form using developer suit 10g (9.0.4).
and successfully compiled and attached webutil library.then i subclass
webutil object group from webutil.olb into my form,that is also
subclassed successfully.Form has also been compiled and saved
successfully.
also configured my formsweb.cfg,forms90.conf,default.env according to webutil documentation.
{color:#993366}Now when i run this form from client, it does not show form in the
browser and shows a message on the client browser console as follows{color}.
{color:#0000ff}*Applet oracle.forms.webutil.common.RegisterWebUtil*
{color} {color:#993366}After this message,It does nothing and if i refresh browser,it shows following message in the browser' Console.{color}
{color:#0000ff}*Applet oracle.forms.engine.Main notinited.*{color}
Note:In the browser ,loading java applet is also visible.
how should i resolve this problem?
any suggestion?
Its urgent.
Regards,
abbasyazdani

Refer this metalink note,
566628.1 How To Install Webutil on 10g Oracle AS
[email protected]

How to configure webutil in oracle application server 10g (9.0.4)?

hi,
i want to configure webutil for oracle application server 10g(9.0.4).
how should i start?
i have read the webutil mannual.it is bit tricky.
i want step by step configuration.
Any sort of help is appriciateable.
Regards,
abbasyazdani

hi,
In webutil directory structure,there r four folders,
{color:#0000ff}doc
java
server
webutil{color}
and there are three files.
{color:#0000ff}webutil.pll,webutil.old and create_webutil_db
{color}
In webutil mannual,it is written that we should extract this folder to forms90.
But in forms90, there are {color:#0000ff}server and java folders.
{color:#000000}should i replace forms90's sever and java folder with webutil's server and java folder?
what should i do for this ?
regards
abbasyazdani
{color}{color}

Application server 10g r2 on redhat es 4 installation problem

I was installing application server 10g r2 (infrastructure) on a redhat es4 and I got an error on the configuration assistant for single sign on.
The log file is not telling me what went wrong. Has anybody experienced this problem? How do I restart the configuration assistant?

hello,
could you post at least some log?
regards,
fabrizio

How to get ip and hostname in application server 10g

when i am using sys_context('USERENV','HOST') IN MY value based audit trigger it return ip address of application server.
i want to get client's ip address and hostname that connect to application server 10g.
Regards,
Muhammad Touseef

CKPT wrote:
i want to get client's ip address and hostname that connect to application server 10g.you can find in listener.log file for all the client connections, or if any active sessions you can find from
select username,machine from v$session;LOL
You gave a totally correct answer. Unfortunately not relevant, though.
Now take a look at that answer in context of the question. The question is "given that the environment is 3 tier, and given that the client to the database is an application server, how do we get the information about the client to the application server - one tier further out?"
OP - this is a known problem with current application server configurations and applications. The only current way of providing that info is for the app server to capture and pass that info on. An easy way to pass it on, available to the app developer, is to use the DBMS_APPLICATION_INFO package.
Perhaps one day the WebLogic Server folk will see fit to make that transparent. ;-)

How deploy 6i Forms Fmx trought Application Server 10g

Hello every one,
Situation :
In my company, we have a software developed by a team using Oracle Forms 6i, the application is connected te Oracle 9i Database and every thing works well.
Problem :
I was able to upgrade the database from 9i to 10g. But my question : is it possible to deploy all the Forms (fmx 6i version) on Application Server 10g. I want to use the 3-tiers architecture.
Take note that i have not the fmb source files. Just the FMX (about 40 files)
If yes, can you explain also how to proceed (tools to install on Application Server) and how to setup the connection between the 3 tiers throught a LOCAL NETWORK.
Regards
Kira

You will at least need to recompile all those *.fmb to *.fmx in the version of the App server you will be using.
We have a forms6 c/s application we are migrating to forms 11g and it almost that easy (except for changes in how you launch reports).
The application server is setup alot like the client/server side of forms is, it needs a tnsnames.ora that points to the database and it needs to know where you will be storing the forms and report. Looks for any *.fmx and that will be the default location.

Oracle application server 10g version checking scripts

Hi does anyone know how the script to check the application server 10g version on R12.1.3, without checking it on the form.

Hi Tunde,
You can get the detailed version of all the 10.1.2 and 10.1.3 components using the below commands
A. 10.1.3 Component Versions
========================
1. Login in to Putty as application file system owner
2. Source the applications env file under $ORA_CONFIG_HOME/10.1.3 directory.
3. cd $ORACLE_HOME/OPatch
4. opatch lsinventory -detail >> inv.out
5. Review the inv.out file and check for the Oracle Application Server and other component versions.
B. 10.1.2 Component Versions
========================
1. Login in to Putty as application file system owner
2. Source the applications env file under $APPL_TOP
3. cd $ORACLE_HOME/OPatch - This will be pointing to 10.1.2 Home
4. opatch lsinventory -detail >> inv.out
5. Review the inv.out file and check for the Oracle Application Server and other component versions.
I hope this clarifies your queries, Please let me know the same.
Regards,
Thiagarajan.

Oracle Application Server 10g Cloning - Urgent

Hello All,
I have been given a new assignment which involves Oracle Applications server 10g, i am new to oracle application server and hoping that some one will please clarify my doubts.
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?
Eagerly waiting for a reply

user12077492 wrote:
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?1) Yes, it is possible. The DB that comes with OAS as the infrastructure DB for it (I presume you are installing a full OAS with infrastructure and midtier both) does not affect the DB you already have on your system ... obviously ... as long as you install them in their separate homes.
2) I always say, this term cloning is somewhat loosely used in general communication meaning making copies. In OAS context, Cloning works for middletiers only. You cannot clone an infrastructure.
To make a redundant/alternate environment for OAS, you can do the following:
- a) either use the same infra on machine 1, and install another midtier and register with the same infra.
- b) or install a separate infra on machine 2, and also a midtier registered with it.
Here for the first option a), Cloning can be used because you can (*only*) clone a middle-tier. There are pros and cons for this setup, including that you share the SSO, and OID, and hence users and groups bases, etc on those two environments - something that you may or may not want. But then there are also some way-outs to avoid them or minimize their effects too. Please see the following reference for cloning and search on Metalink for how to minimize effects, once you get better familiar with the processes.
Oracle® Application Server Administrator's Guide
10g Release 2 (10.1.2)
B13995-08
[10 Cloning Application Server Middle-Tier Instances|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm#BCGBDIDF]
For b), you will need to Stage a server as defined in this reference.
[11 Staging a Test Environment from a Production Environment|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/prodtest.htm]
There are some notes on Metalink which address issues about benefits or procedures of Cloning and Staging an environment too.
There are some other ways to export/transport your applications to another instance across DB. Please also read about them.
hope that helps!
AMN

Oracle application server 10g help

Hi,
I need to work on a project that pulls data from the oracle database and should be able to generate reports based on user entered criteria and they want me to use the oracle application server 10g.
(I also need to do manipulations on the data pulled out.)
How do i start and what are the things that i need to install..
If somebody could guide me in a few words, i can pick it up from there...
Thanks

Hi,
Thanks a lot for replying..
This is a simple overview of my project..
Basically i need to convert a client server application which was initially in Access (and coded in VBA) and oracle to oracle based web application.
The application that was built in access has various flaws and hence we decided to rewrite them with lot of new features..
what i would need is several web pages(probably intranet based...) where i pull data from the oracle db, and then do manipulations on them and then based on certain criteria come up with a report based on users needs...
I hope this info is enough to guide me
Thanks.

Oracle Application Server 10g (Application Running)

Dear All Sir/Madam
It is my humble request that please tell me how to run Application on Application Server 10g.
I developed my Application in Oracle developer suit 10g (build internet appliacation), and I am using *10g database*.
Now please tell me the complete procedure who to configure oracle application server 10g on linux.

Hello Ghulam,
Notice that you can deploy different kind of applications within the Application Server framework, e.g. JEE applications, PL/SQL applications, Forms Applications etc. Based on what you initially mentioned, it seems that your have developed a Forms application. The above document reference refers to Application Server 10.1.3, which was a JEE / SOA release. You are probably better off with the [url http://download.oracle.com/docs/cd/B14099_18/web.1012/b14032/toc.htm]Forms Deployment Guide.
One note : Application Server 10.1.2.x is soon to be desupported. Consider to move to version [url http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html]11.1.2 !
Thanks,
EJ

Installing Oracle Application Server 10g 10.1.2.0.2 on RHEL 5.3

Dear All,
My Linux version is RedHat 5.3
I want to Install oracle 10g Application Server on it please help me out to do so.
Please help me,thanks in advance.
Please provide me with the documentation link to install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Thanks and Regards
Monoj Das

install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Said that OAS 10.1.2.0.2 is desupported, you have to apply patch 10.1.2.3 to be fully certified on OEL/RHEL 5.
See MOS doc. ID 564174.1 Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

Oracle application server 10g and apex

Hi allm
Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
Thanks.
Allen
Edited by: A.Sandiego on Sep 3, 2008 12:01 AM

Hi,
Thanks for the response.
Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
Thanks.
Allen

Oracle Application server 10g

Hi:
How to check if our system is Oracle Application Server 10g intergrated? It was asked in a patch readme ATG.RUP.6. this is 11.5.10.2 on unix, 10g rdbms. they have SSO. THANKS
Edited by: user9231603 on Feb 11, 2011 6:37 AM

Hi;
For SSO check note Oracle SSO E-Business Suite Applications Integration with Oracle Business Intelligence [ID 553423.1] part Setting SSO Profiles
For OID check svcname parameter in CONTEXT_FILE.. Details can be avaliable at:
Oracle SSO E-Business Suite Applications Integration with Oracle Business Intelligence [ID 553423.1]
Regard
Helios

Webutil on Application Server 10g 10.1.2.0.2

Similar Messages

Maybe you are looking for