Webutil with JPI

Hi All,
i have a strange case , i managed to configure Webutil under my 10.1.2 AS and jini. , and after that i replaced the jini. with jpi , it works fine but it takes alot of time to load the forms that contains Webutil usage almost (50sec.) where it takes only 2-3 sec. , any hints .... Thanks

most of the time this means that your webutil.pll isn't good attached but it is very dependant on the versions you working on.
Post your versions of forms ias and webutil.
In older version it is sometimes necessary to first subclass the webutil group and then attach the webutil.pll. Other way around didn't work (was in beta version 1.02 I believe)

Similar Messages

Webutil and JPI

Hi All,
i have a strange case , i managed to configure Webutil under my 10.1.2 AS and jini. , and after that i replaced the jini. with jpi , it works fine but it takes alot of time to load the forms that contains Webutil usage almost (50sec.) where it takes only 2-3 sec. , any hints .... Thanks

i forgot to mension , it works fine without any error except the delay and iam using 2003 Server 64Bit, thanks
Message was edited by:
mr_jaber

Webutil with application server 10.1.2.0.2

hello for all
how i deploy webutil with application server 10.1.2.0.2

I think the question was about requirements to create and run WebCenter centric applications and portlets in general. Please correct me if I'm wrong but isn't the context of the question about reuse of an existing AS 10gR2 platform? This would only make sense if the existing platform could be used for any parts of the Webcenter application - JSF runtime and portlets. Webcenter has to be setup on a 10gR3 container so you have at least one 10gR3 instance involved - at least for the Webcenter app. So why should you have an interest to mix up your application architecture with a 10gR2 based portlet deployment
Also, if you want to use a 10gR2 container for your portlets you can only build portlets based on a 10gR2 PDK/portlet container. A 10gR3 PDK requires a 10.1.3.1 minimum release of the OC4J. Hence a 10gR2 for portlets doesn't make any sense for a Webcenter application.

Can we use WebUtil with Oracle Forms 6i

Can any one tell me if we can use WebUtil with Oracle Forms 6i..I have 11.5.9 instance of oracle apps and i want to use some features of WebUtil to customize one of seeded Oracle Form.
Any pointers in this regard are quiet welcome.
Thanks,

Strictly speaking no...however you could "backport" the webutil code and in theory you could get some of the functionality to work - this is not supported in the context of oracleForms although Oracle Applications may have their own specific solution/certification of this.
Regards
Grant Ronald

Use Forms with webutil with java plug

I am using oracle 9i forms with webutil, it works with jinitiator but I have problem runiing with java plug-in. I have changed formweb.cfg as follow. It des not work.
It works on oracle 10g rel1 appserver using jinitiator but does not work with java plug.
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,0
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
baseHTMLJInitiator=basejpi.htm

see
Webutil using JAVA plug
Good thing to start using JRE anyway ;-)
Erwin

FRM-92102 in Forms using Webutil with JInitiator

Hi Gurus,
I'm facing the error FRM-92102 in Forms in some clients, that's driving my crazy. The facts are:
* Oracle Application Server 10g R2 10.1.2 with Patchset 10.1.2.2.0 applied (left to apply patchset as doc 404477.1 in Metalink) on Windows 2003 Server Std. Ed. 64 bits.
* JInitiator 1.3.1.26 on all clients (Windows XP and Windows 2000)
* WebUtil 10.1.2.2
* heartBeat = 35, set in App's section of formsweb.cfg
* networkRetries = 60 in App's section of formsweb.cfg
* Modified versions of baseHTMLjinitiator(to be used with JInitiator) and baseHTMLjpi to take into account the heartBeat and networkRetries parameters.
* FORMS_TIMEOUT set to 30 in application.env
I've seen that this error happens with Windows XP clients only (with SP2 and/or SP3 applied), while in Windows 2000 with SP4 I get no error at all and the Form works and ens without any problem.
I've seen that increasing networkRetries parameter increase the likelihood of Forms to end normally, but that doesn't seem a good solution: at which value must I bring it to ?
The captured Java console of one of this errors is as follows:
<hr />
JInitiator: Versión 1.3.1.26
Usar versión JRE 1.3.1.26-internal Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Documents and Settings\myuser
El usuario ha alterado los valores de delegado del explorador.
Configuración del delegado: sin delegado
JAR cache enabled
Location: C:\Documents and Settings\myuser\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to
Loading [http://mydomain.es/forms/java/frmall_jinit.jar] from JAR cache
Loading [http://mydomain.es/forms/java/frmwebutil.jar] from JAR cache
RegisterWebUtil - Loading WebUtil Version 10.1.2.2
Loading [http://mydomain.es/forms/java/jacob.jar] from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
La versión del applet Forms es: 10.1.2.2
Volviendo a conectar (intento 1 de 30)...
Volviendo a conectar (intento 2 de 30)...
Volviendo a conectar (intento 3 de 30)...
Volviendo a conectar (intento 4 de 30)...
Volviendo a conectar (intento 5 de 30)...
Volviendo a conectar (intento 6 de 30)...
Volviendo a conectar (intento 7 de 30)...
Volviendo a conectar (intento 8 de 30)...
Volviendo a conectar (intento 9 de 30)...
Volviendo a conectar (intento 10 de 30)...
Volviendo a conectar (intento 11 de 30)...
Volviendo a conectar (intento 12 de 30)...
Volviendo a conectar (intento 13 de 30)...
Volviendo a conectar (intento 1 de 30)...
Volviendo a conectar (intento 2 de 30)...
Volviendo a conectar (intento 3 de 30)...
Volviendo a conectar (intento 4 de 30)...
Volviendo a conectar (intento 5 de 30)...
Volviendo a conectar (intento 6 de 30)...
Volviendo a conectar (intento 7 de 30)...
Volviendo a conectar (intento 8 de 30)...
Volviendo a conectar (intento 1 de 30)...
Volviendo a conectar (intento 2 de 30)...
Volviendo a conectar (intento 3 de 30)...
Volviendo a conectar (intento 4 de 30)...
Volviendo a conectar (intento 1 de 30)...
Volviendo a conectar (intento 2 de 30)...
Volviendo a conectar (intento 3 de 30)...
Volviendo a conectar (intento 4 de 30)...
Volviendo a conectar (intento 5 de 30)...
Volviendo a conectar (intento 6 de 30)...
Volviendo a conectar (intento 7 de 30)...
Volviendo a conectar (intento 8 de 30)...
Volviendo a conectar (intento 9 de 30)...
Volviendo a conectar (intento 10 de 30)...
Volviendo a conectar (intento 11 de 30)...
Volviendo a conectar (intento 12 de 30)...
Volviendo a conectar (intento 13 de 30)...
Volviendo a conectar (intento 14 de 30)...
Volviendo a conectar (intento 15 de 30)...
Volviendo a conectar (intento 16 de 30)...
Volviendo a conectar (intento 17 de 30)...
Volviendo a conectar (intento 18 de 30)...
Volviendo a conectar (intento 19 de 30)...
Volviendo a conectar (intento 20 de 30)...
Volviendo a conectar (intento 21 de 30)...
Volviendo a conectar (intento 22 de 30)...
Volviendo a conectar (intento 23 de 30)...
Volviendo a conectar (intento 24 de 30)...
Volviendo a conectar (intento 25 de 30)...
Volviendo a conectar (intento 26 de 30)...
Volviendo a conectar (intento 27 de 30)...
Volviendo a conectar (intento 28 de 30)...
Volviendo a conectar (intento 29 de 30)...
Volviendo a conectar (intento 30 de 30)...
java.net.BindException: Address in use: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.Socket.(Unknown Source)
at java.net.Socket.(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.(Unknown Source)
at sun.net.www.http.HttpClient.(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpClient.(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpClient.New(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpURLConnection.createConnection(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
at oracle.forms.net.HTTPNStream.connect(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
java.io.EOFException
at java.io.DataInputStream.readUnsignedByte(Unknown Source)
at oracle.forms.engine.Message.readDetails(Unknown Source)
at oracle.forms.engine.Message.readDetails(Unknown Source)
at oracle.forms.net.StreamMessageReader.run(Unknown Source)
<hr />
I'm completely at a loss here. Any advice would be greatly appreciated.
Thanks in advance.

Hi Michael,
I've done what the Microsoft note states and the error takes longer to appear, but it does.
I've done some netstat -an captures before using the Forms App (before the error) and after. Here are:
Before:
Conexiones activas
Proto Direcci¢n local Direcci¢n remota Estado
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1991 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2030 0.0.0.0:0 LISTENING
TCP 0.0.0.0:6129 0.0.0.0:0 LISTENING
TCP 0.0.0.0:16992 0.0.0.0:0 LISTENING
TCP 0.0.0.0:16993 0.0.0.0:0 LISTENING
TCP 0.0.0.0:19226 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1040 127.0.0.1:1041 ESTABLISHED
TCP 127.0.0.1:1041 127.0.0.1:1040 ESTABLISHED
TCP 127.0.0.1:1042 127.0.0.1:1043 ESTABLISHED
TCP 127.0.0.1:1043 127.0.0.1:1042 ESTABLISHED
TCP 127.0.0.1:1044 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1058 127.0.0.1:1059 ESTABLISHED
TCP 127.0.0.1:1059 127.0.0.1:1058 ESTABLISHED
TCP 127.0.0.1:1060 127.0.0.1:1063 ESTABLISHED
TCP 127.0.0.1:1063 127.0.0.1:1060 ESTABLISHED
TCP 127.0.0.1:1064 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1066 127.0.0.1:1067 ESTABLISHED
TCP 127.0.0.1:1067 127.0.0.1:1066 ESTABLISHED
TCP 127.0.0.1:1068 127.0.0.1:1069 ESTABLISHED
TCP 127.0.0.1:1069 127.0.0.1:1068 ESTABLISHED
TCP 127.0.0.1:3274 127.0.0.1:6139 ESTABLISHED
TCP 127.0.0.1:3275 127.0.0.1:3276 ESTABLISHED
TCP 127.0.0.1:3276 127.0.0.1:3275 ESTABLISHED
TCP 127.0.0.1:3277 127.0.0.1:3278 ESTABLISHED
TCP 127.0.0.1:3278 127.0.0.1:3277 ESTABLISHED
TCP 127.0.0.1:6083 0.0.0.0:0 LISTENING
TCP 127.0.0.1:6139 0.0.0.0:0 LISTENING
TCP 127.0.0.1:6139 127.0.0.1:3274 ESTABLISHED
TCP 127.0.0.1:9000 0.0.0.0:0 LISTENING
TCP 127.0.0.1:31595 0.0.0.0:0 LISTENING
TCP 192.168.147.139:139 0.0.0.0:0 LISTENING
TCP 192.168.147.139:3236 192.168.146.2:445 ESTABLISHED
TCP 192.168.147.139:3283 172.17.4.33:1026 ESTABLISHED
TCP 192.168.147.139:3318 172.17.7.223:1435 ESTABLISHED
TCP 192.168.147.139:3322 192.168.146.4:4136 ESTABLISHED
TCP 192.168.147.139:3323 192.168.146.4:389 ESTABLISHED
TCP 192.168.147.139:3473 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3481 172.17.7.223:1435 TIME_WAIT
TCP 192.168.147.139:3482 192.168.146.6:80 CLOSE_WAIT
TCP 192.168.147.139:3483 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3484 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3485 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3486 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3487 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3488 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3489 192.168.146.6:80 CLOSE_WAIT
TCP 192.168.147.139:3490 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3491 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3492 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3493 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3494 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3495 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3496 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3497 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3498 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:3499 192.168.146.6:80 CLOSE_WAIT
TCP 192.168.147.139:6129 192.168.146.90:3102 ESTABLISHED
UDP 0.0.0.0:259 *:*
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1065 *:*
UDP 0.0.0.0:3285 *:*
UDP 0.0.0.0:4500 *:*
UDP 0.0.0.0:18234 *:*
UDP 0.0.0.0:19226 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1025 *:*
UDP 127.0.0.1:1054 *:*
UDP 127.0.0.1:1900 *:*
UDP 127.0.0.1:3289 *:*
UDP 127.0.0.1:18001 *:*
UDP 127.0.0.1:18002 *:*
UDP 192.168.147.139:123 *:*
UDP 192.168.147.139:137 *:*
UDP 192.168.147.139:138 *:*
UDP 192.168.147.139:1900 *:*
AFTER:
Conexiones activas
Proto Direcci¢n local Direcci¢n remota Estado
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1991 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2030 0.0.0.0:0 LISTENING
TCP 0.0.0.0:6129 0.0.0.0:0 LISTENING
TCP 0.0.0.0:16992 0.0.0.0:0 LISTENING
TCP 0.0.0.0:16993 0.0.0.0:0 LISTENING
TCP 0.0.0.0:19226 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1040 127.0.0.1:1041 ESTABLISHED
TCP 127.0.0.1:1041 127.0.0.1:1040 ESTABLISHED
TCP 127.0.0.1:1042 127.0.0.1:1043 ESTABLISHED
TCP 127.0.0.1:1043 127.0.0.1:1042 ESTABLISHED
TCP 127.0.0.1:1044 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1058 127.0.0.1:1059 ESTABLISHED
TCP 127.0.0.1:1059 127.0.0.1:1058 ESTABLISHED
TCP 127.0.0.1:1060 127.0.0.1:1063 ESTABLISHED
TCP 127.0.0.1:1063 127.0.0.1:1060 ESTABLISHED
TCP 127.0.0.1:1064 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1066 127.0.0.1:1067 ESTABLISHED
TCP 127.0.0.1:1067 127.0.0.1:1066 ESTABLISHED
TCP 127.0.0.1:1068 127.0.0.1:1069 ESTABLISHED
TCP 127.0.0.1:1069 127.0.0.1:1068 ESTABLISHED
TCP 127.0.0.1:3274 127.0.0.1:6139 ESTABLISHED
TCP 127.0.0.1:3275 127.0.0.1:3276 ESTABLISHED
TCP 127.0.0.1:3276 127.0.0.1:3275 ESTABLISHED
TCP 127.0.0.1:3277 127.0.0.1:3278 ESTABLISHED
TCP 127.0.0.1:3278 127.0.0.1:3277 ESTABLISHED
TCP 127.0.0.1:6083 0.0.0.0:0 LISTENING
TCP 127.0.0.1:6139 0.0.0.0:0 LISTENING
TCP 127.0.0.1:6139 127.0.0.1:3274 ESTABLISHED
TCP 127.0.0.1:9000 0.0.0.0:0 LISTENING
TCP 127.0.0.1:31595 0.0.0.0:0 LISTENING
TCP 192.168.147.139:139 0.0.0.0:0 LISTENING
TCP 192.168.147.139:1025 192.168.146.6:80 TIME_WAIT
... (2000 to 3000 lines follows)
TCP 192.168.147.139:4980 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:4999 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:5000 192.168.146.6:80 TIME_WAIT
TCP 192.168.147.139:6129 192.168.146.90:3102 ESTABLISHED
UDP 0.0.0.0:259 *:*
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1065 *:*
UDP 0.0.0.0:3285 *:*
UDP 0.0.0.0:4500 *:*
UDP 0.0.0.0:18234 *:*
UDP 0.0.0.0:19226 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1025 *:*
UDP 127.0.0.1:1054 *:*
UDP 127.0.0.1:1900 *:*
UDP 127.0.0.1:3289 *:*
UDP 127.0.0.1:18001 *:*
UDP 127.0.0.1:18002 *:*
UDP 192.168.147.139:123 *:*
UDP 192.168.147.139:137 *:*
UDP 192.168.147.139:138 *:*
UDP 192.168.147.139:1900 *:*
FYI, the IP 192.168.146.6 is the Application Server.
Thanks in advance.

WebUtil with Forms 9i AS

We have developed application in both 6i and 9i. user can use both client server and web layout as per his convinince. Now we are generating files using TEXT_IO package, these files are created on server if user is using web and on his matchine if user is using client server. when I write code to open this file it works perfectly with client server with HOST command, but I am unable to open file at server by WEB.OPEN_DOCUMENT() command, can u help me ??????
how can I configure my AS so file can be open from server.

Nishith,
you need to write the files into a directory that can be accessed from teh web. Then you can use the file download facilties of webutil, or access it directly using web.show_document('URL','_blank');
Frank

WebUtil with ActiveX

Can webUtil used to deploy form with activeX control (Image capture ActiveX control). hope to find a demo form

What do you do with the active/X is it embedded in your Forms UI or are you just calling to it using OLE2 package to activate the image capturing?
The second option will work with WebUtil.

(RHEL3) iAS form service 10g with jpi 1.4x error

hello~
my form service os is RHEL3 , and i install
oracle form and report service 10g on it !
when i use jinit 1.3.1.13 and ienative VM to test form
, everything is fine , but use jpi 1.4x to test
form will raise the java exception like below :
FRM-92050
<java.io.IOException: Negative content-length from HTTP.>
at oracle.forms.net.HTTPNStream.doGet(Unknow Source)...
========================================================
but when i install the IDS 10G in another RHEL3 server
and start the OC4J instance , i test form with
config= jinit or ienative or jpi , everything is fine,
is it a BUG in IAS904 form for linux platform???
I'm sure all config had setup ok..

We had the same error (FRM-92050) (we have a Unix server) and we changed the FORMS60_TIMEOUT=10 (from 5) and upped the users and confirmed processes from the default of 100 to 200 (in the default.env and init<dbname>.ora). Now we are able to connect remotely.
(We had not priviously done all the post install steps. These are included in those steps.)
good luck,
LW

Webutil with IE=native, can't get it up and running

Hi,
I'm impressed on the WebUtil functionality. Got it up and running smoothly using JInitiator. Great Stuff!
My problem appears with a customer that wants me to deploy this functionality through native JVM of IE6.0.
Did anyone of you manage to get Webutil up and running not using JInitiator but the native IE JVM??
(When will webutilbase.htm be included in WebUtil?)
Any help would be appreciated!!
Kind Regards, Marc Vahsen
=====================================================
Details:
I managed to:
- create cab files for webutil.jar and jacob.jar, resulting in webutil.cab and jacob.cab
When I try to invoke the first form that uses the webutil object group, I get errors:
- FRM-92100 (connection to server lost)
- Details: FRM-92040 Java class not found, javax.swing.JLabel
Trying to analyze this with my restricted java knowledge, I see that this class is present in rt.jar, which is added to my (server) classpath in default.env.
Should I make a cab file for this one also??
Further analysis shows that the webutiljini.htm contains an extra "section" that calls oracle.forms.webutil.common.RegisterWebUtil.
As the file 'webutilbase.htm' is missing in webutil_102.zip, I tried to create this htm file myself, with extra section:

<APPLET CODEBASE="%codebase%"
CODE="oracle.forms.webutil.common.RegisterWebUtil"
WIDTH="0"
HEIGHT="0">
<PARAM NAME="cabbase" VALUE="webutil.cab,jacob.cab">
<PARAM NAME="serverURL" VALUE="%serverURL%">
<PARAM NAME="networkRetries" VALUE="%networkRetries%">
</APPLET>

This however does not work, and reduced my left options to 1: post a topic on OTN!

Extra information:
The code section that is unreadable in the topic description above (without the less than / greater than signs reads:
APPLET CODEBASE="%codebase%"
CODE="oracle.forms.webutil.common.RegisterWebUtil"
WIDTH="0"
HEIGHT="0"
PARAM NAME="cabbase" VALUE="webutil.cab,jacob.cab"
PARAM NAME="serverURL" VALUE="%serverURL%"
PARAM NAME="networkRetries" VALUE="%networkRetries%"
/APPLET

Webutil with 11gR2 64-bit ?

Hi all,
Please let me know about the avaibility of Webutil in 11gR2 64-bit Forms.
Some said that Webutil can not be used with 11gR2 64-bit Forms.
If yes, then what is the alternative ?
Thanks.

Webutil does work with Forms11gR2 64-bit.
We've just used it very recently for this platform.
You need to make sure you have the correct version of the jacob libraries.
Forms 9.0.4 and older with WebUtil 1.0.5 (beta) and older - Jacob 1.0.7
Forms 9.0.4 and older with WebUtil 1.0.6 (beta) and older - Jacob 1.0.8
Forms 10.1.2.0.2 - 10.1.2.3.0 with WebUtil 10.1.2.0 - 10.1.2.3 - Jacob 1.0.8
Forms 10.1.2.3+ (Forms Bundle patch) - 11.1.1.x with WebUtil 10.1.2.3 - 11.1.1.x - Jacob 1.10.1
Forms 11.1.2 with WebUtil 11.1.2 - Jacob 1.14.3
(Taken from Michael's post Jan.2012)
rgds
Tony

Webutil with Forms6i

Hello,
Is there anyone who could send me Forms6i configuration files that work correctly with webutil (default.env, formsweb.cfg) ?
Thanks

Note that this is something we will not support and we know that some functions may not work correctly.
You need to be using 9i or 10g.
Regards
Grant

Error in the webutil with internet explorer

Error:
The internet explorer.exe found a problem and needs to be
closed..

Aledandre - its impossible to help you. We don't know what your code was doing, how it was called, what version numbers.
Please be more explicit.
Regards
Grant Ronald
Forms Product Management

Webutil error "unable to communicate with runtime process."

Hi,
Yesterday I configured webutil with Developer 10g (9.0.4).
I used webutil_106.zip and jacob_18.zip.
I succesfully deploy a form that display the selection file dialog with the function:
CLIENT_GET_FILE_NAME
Today I tried to test again the form, and I got an error when the form is opening, I review the log and I find "unable to communicate with runtime process.".....
I didn't change any configuration... what I'm doing wrong..... It just work great yesterday!!!!
I tried signing again the jacob.jar and frmwebutil.jar files..... However I still have the error.......
Any help is welcome....
The error in the log:
09/03/25 10:57:45 Started
09/03/25 10:57:55 forms90web: jsp: init
09/03/25 10:57:55 forms90web: f90servlet: init
09/03/25 10:57:55 forms90web: FormsServlet init():
configFileName: c:\dev10g/forms90/server/formsweb.cfg
testMode: false
09/03/25 10:57:55 forms90web: 9.0.4.0.0 Started
09/03/25 10:57:56 forms90web: l90servlet: init
09/03/25 10:57:56 forms90web: ListenerServlet init()
09/03/25 10:58:02 forms90web: Forms session <1> aborted: unable to communicate with runtime process.
09/03/25 10:58:02 forms90web: Forms session <1> exception stack trace:
java.io.IOException: FRM-93000: Unexpected internal error.
Details : No HTTP headers received from runform
     at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
09/03/25 11:00:58 forms90web: l90servlet: destroy
09/03/25 11:00:58 forms90web: 9.0.4.0.0 Stopped
09/03/25 11:00:58 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
Edited by: Santiago on 25/03/2009 11:23 AM

I Find the way, It's OK now.
When I use the webutil.olb in a form. I chose "Subclass", It's necessary to choose "Copy".

Internet Explorer 9 crashes with webutil

Hi, i installed webutil kit on windows vista 32 bits business editions. The installation was successful. Jacob sign was ok too.
I have forms 10g 10.1.2.3.0
Installed pacth 7384879 and was ok
Forms and Reports 10g work nice on internet explorer 9 and until now have a problem with webutil
Regards

Forms 10 is not supported for use with IE9. That said, generally when a browser crashes while running a plug-in (Java plugin in this case), the issue is a problem with the plugin and not the application running within it. Also, to use WebUtil with Forms in Vista or newer, the user will need to have Administrator permissions (Windows). If not, an error or crash will occur. This is because WebUtil will attempt to write into the Program Files directory which is not permitted unless you are an Admin. This restriction can be overcome if you install a newer version of the Forms Bundle patch then change the configuration so that writing to the restricted directory no longer occurs (redirect writing to a permitted directory).
Refer to Patch ID 9593176 (requires Jacob 1.10.1) and the follow MyOracleSupport note:
<li> How To Change The Default Download Directory For Forms WebUtil Client Files (Doc ID 783937.1)
Also refer to: "Oracle Forms 10.1.2.3 Bundle Patch Frequently Asked Questions (FAQ) (Doc ID 1188127.1)"

Webutil with JPI

Similar Messages

Maybe you are looking for