Webview not displaying reports correctly

Hello,
I want to retrieve "agent03" report from webview. For a specific agent, webivew is not displaying the latest reports for a specific agent. The same report is displaying for other agents.
Any suggestion?
Thanks,
Justine.

Might be something really simple as that agent really doesn't have any data, check the database directly.
david

Similar Messages

SQL Report Viewer Web Part Not displaying Report

I have just completed updating an old report using report builder 3.0. I have added it to SharePoint Designer but have not replaced the old report file.
Any help is greatly appreciated!!
All I did was export the old report from sharepoint designer to my desktop. Then opened it with Report Builder 3.0- made changes to the report and saved it with a different name (for safety in case i break things) and then upload it back to the same place where
the old report was located using SP Designer. I then went back to the site in sharepoint that is displaying the old report, and changed the URL path in the SQL report viewer to the new report.
Now the SQL Report Viewer web part isn't showing anything (blank)

Dear Form Moderator,
This question is already asked in sharepoint forum so please don't move this sharepoint forum. Here is link of thread:
https://social.technet.microsoft.com/Forums/en-US/3796da85-fbb4-4722-a5d0-724859f7d4ae/sql-report-viewer-web-part-not-displaying-report?forum=sharepointgeneralprevious
Here is the one more duplicate thread link in same forum. So either you can merge both OR delete one.
https://social.technet.microsoft.com/Forums/en-US/259d2586-ed4a-4f47-a808-877d4621d9f2/report-builder-30-sql-report-viewer-web-part-not-displaying-report-in-sharepoint?forum=sqlreportingservices
[SharePoint Forum Moderator]
Hemendra:Yesterday is just a memory,Tomorrow we may never see Please remember to mark the replies as answers if they help and unmark them if they provide no help

Firefox is not displaying the correct font color on my blog, but other browsers are.

I have a web designer issue. Firefox is not displaying the correct font color on the header in my blog. Explorer, Chrome, and Safari have no problems. The page is in css but this particular section has html code o designate color. The code is as follows:
blog
Though all other browsers display the light orange color designated, Firefox displays white. Strangely, if if retype the code by spelling out a color, Firefox displays it correctly. i.e.
blog
... will give me black. You can see the effect by viewing the link below and looking at the word "blog" in the header, which should be light orange but is not in Firefox.

Actually it also seems to work in the current Firefox 4 beta as it is.
The code is not right though - the correct syntax for the color attribute with hex values is with a # at the start, so:
color="#FF9966"
It might work in Firefox 3.x if you change that.

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

Why is Mavericks Calendar not displaying numbers correctly?

My Calendar application is not displaying numbers correctly, I have tried validating my fonts and found nothing there, so not sure what the problem is...

Have yopu gone to Font Book
Font Book is located in the Applications folder (in the Finder, choose Go > Applications). To manage or view fonts, open Font Book, or double-click a font file.
High Light all the fonts ( Shift and click 1st one Shift and click last one) and
then select File/Falidate Fonts
Then making sure all the fonts get a green tick box.

Why is Preview not displaying fonts correctly?

Since the last Snow Leopard upgrade, Preview is not displaying some fonts correctly. I checked to see if the fonts were embedded in the PDF (by resorting to Adobe Acrobat 5... which is not displaying them correctly either) and they are True Type with Windows encoding which as far as I know Preview OS X should be able to handle.
I tried deleting the Preview preferences in User/Library/Prefeerences and restarting but this made no difference. The same PDF works perfectly though on an old iMac that is running OS X Tiger!!!

Well I found a few minor font problems which seem to have cropped up since the last system upgrade, but none of those were the font in question. Also, as I understand it, the whole point of PDF documents is that the fonts are embedded in the document so you do not have to have the fonts installed on your computer to view the PDF properly. I use a lot of special fonts and when I save documents as a PDF I can send them to anyone on the internet and they can usually see everything as it is meant to be.

Design Window is not displaying the correct view

Hi
For some reason the Design View on my CS3 is not displaying
the correct view.
It used to show how the web page would look but it is simply
showing up the wording and pictures surrounded by dotted black
lines.
I am using a template as a bases for all the pages and all
the pages are showing like this.
My other sites are showing up OK though.
When I Preview in Browser, it all shows up OK.
Can anyone help?
Bezz

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Bezz333" <[email protected]> wrote in
message
news:fttdsr$394$[email protected]..
> Hi
>
> For some reason the Design View on my CS3 is not
displaying the correct
> view.
>
> It used to show how the web page would look but it is
simply showing up
> the
> wording and pictures surrounded by dotted black lines.
>
> I am using a template as a bases for all the pages and
all the pages are
> showing like this.
>
> My other sites are showing up OK though.
>
> When I Preview in Browser, it all shows up OK.
>
> Can anyone help?
>
> Bezz
>

Server Admin not displaying groups correctly

Server 10.5.8, Mac Pro 4 core 2.66, 56 GB RAM.
Had a crash yesterday, all back to normal now except:
Server Admin's "show users and groups" is not displaying groups correctly" "users" is missng, and any new groups I created in WM are missing. Even if I sort by GID, they don't show up. And yet, if I type "staff" in the search bar, it shows up with GID 20. Also shared folders are showing up as groups

Surely someone can at least point me in the right direction? I tried rebuilding the LDAP database, but that didn't fix it.

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly.

Hi everyone,
I posted this in September: "Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated."
I got one response from that posting, suggesting that the pdf was corrupted over email. That wasn't the problem.
What I didn't say above is that whenever I got an error message upon opening the pdf and clicked OK, I got another message: "Insufficient data for an image." I found that one or all of the images in the pdf were missing. Upon further investigation, the contractor and I found that sometimes the error message pointed to a specific font used--that being a Helvetica Bold font. Once we substituted it with a Helvetica Neue LT Std Adobe Opentype font, we no longer had an issue.
However, the problem rose it's ugly head today--what, 6 months later! I'm talking about 2 different pdfs this time.
For PDF#1, I got this error message about the font: "Cannot extract the embedded font 'JNAGNS+HelveticaNeueLTStd-Bd'. Some characters may not display or print correctly." When I click OK, I get another: "Insufficient data for an image." The images don't show up in the pdf. What I don't understand about this pdf is that this is one of those that was fixed in September. The only changes made in the document was to paragraph text--none to the text in the images. When I opened the revised pdf today, I am getting the same message again. This makes no sense.
I returned to my September blog to see if any further advice had been posted, but nada--not even anything from Adobe about it. I goggled until I found where someone suggested running a "Report PDF syntax issues" analysis in Preflight. I did that and even though the analysis showed the pdf passed, I checked the fonts in the list and saw that the one pointed to in the error message showed that a long list of glyphs were missing on both pages of the pdf. I have asked my contractor to replace her font with a new one, in case it has gotten corrupted. Haven't a new pdf to open yet.
Then when I opened PDF#2, I got the message: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." When I ran the "Report PDF syntax issues" analysis in Preflight, I found got this warning: "Invalid operand(s) for operator (1 match on 1 page)". I clicked through and under "Page Description Errors/Invalid operand(s) for operator", it identifies Operator Name, Stream State, Operators Read, and Traversal Path. Under "Trigger Values" is says "Invalid operand(s) for operator: is true". None of this means a thing to me so I can't figure out what the problem is.
Let me say this: Both the contractor and I are using CS5 and Acrobat Pro 9, on Lion. If it helps, the contractor also sent one of the problem pdfs back in September to my boss who is running Acrobat Pro 9 on Windows 7 and she got the same messages.
Does anyone out there have a suggestion for us? PLEASE HELP!!!!

Thanks to all for posting suggestions. As it turned out, the contractor who was having a problem reinstalled Acrobat 9. She works from home and is emailing the pdfs to me. Things were running smoothly until this past week, when the problem started again. Whenever I get a pdf that won't open properly or print, I asked her to zip it and it is no longer a problem. Last week, I had the same problem start with a contractor in Florida and she also zips the pdf when there is a problem. Now I am thinking the problem might be at my end. I wonder if something is happening to them when they come through our firewall at work. I asked IT about it before but they didn't have a clue what the problem might be. Right now, zipping is the answer...who knows how long that will continue to work.

Web template not displaying report properly for few users

Hi,
We have a report based on a web template.The box is supposed to display values for certain fields.
For some users, this box is not displaying any values, its coming as blank and its shrinked in appearance.
This happens only for a few users.There are others who are able to see the report correctly with the values appearing
Any idea from where should we start trouble shooting and what should we look at?
Thanks,
Anjana

Hi,
You can specify the properties for your Web application in each Web template. The settings you have made can then be saved in a library and applied to any other Web template as needed. Choose the Web template for which you want to make the settings from the dropdown box in the header of the Properties window of the Web Application Desginer.
Go through the link and set according to the below link you can acheive this
http://help.sap.com/saphelp_nw04/helpdata/EN/1f/37813b650cdc0be10000000a114084/content.htm
Regards,
Marasa.

Firefox 6.0 is not Displaying Symbols Correctly

Okay, ever since I updated to Firefox 6.0, it has not been displaying symbols correctly. It '''doesn't''' matter what site I'm on (I just used my twitter account as an example), as I'm having the same issue everywhere.
Example on Firefox:
http://i51.tinypic.com/2iifu5f.jpg
And if I open up Internet Explorer and view it, I see the symbols like I should be. This is what it looks like in Internet Explorer:
http://i53.tinypic.com/25u74sw.jpg
So can anyone lend a hand as to why I'm not seeing symbols correctly in Firefox? And what is the way to fix this? I was having absolutely NO problems prior to the Firefox 6.0 update.
I am also using Windows 7 for my operating system if that helps any!
Thanks!

I honestly have no idea. It's what ever font family Twitter uses and I'm unsure of what they use.
Does anyone know what font settings I should have on Firefox? Or if I'm missing an installed font? I just don't understand why the symbols work perfectly fine on Internet Explorer but not on Firefox. D:

100% Width Slideshow Not Displaying Images Correctly In Phone Version...

Hi all... Again.
2nd issue encountered tonight since working on the mobile version of my current project. Having copied, pasted and resized the 100% width slideshow from the homepage of my Desktop version to my Phone version and after having applied different resolution images and published successfully, I made some edits to a different page (the main "About" page, nothing to do with the Homepage) and published only to find that the images in the slideshow are now not displaying correctly...
After the first (of eight) image, it seems to skip the next one entirely and apply the text for the 2nd image to the 3rd image, the text for the 3rd image to the 4th image and so on... Additional to that, it seems to also randomly use the Desktop resolution images for four of the images... WHY?!
I made NO changes to the slideshow since the last publish so WHY has it changed?
I've tried re-applying the correct images and re-uploading; no change. I've tried doing a full-upload; no change. I've tried closing down Muse and trying again; no change. My only option left really is to either update to the October 27th edition of Muse (which I was deliberately holding off on, until I completed this project, which aside from the mobile version is done!), or to revert back to the previous version of Muse in the hopes either of these will resolve the issue. Only problem with that is I've started using the text sync features and the new contact form features (such as ReCaptcha, which is a pain in and of itself if you want to use two forms on one page!! Heaven forbid!)... So I'd really rather not have to revert back but I also don't really want to risk screwing anything up further with the latest update, as has happened on more than one occasion for me when in the middle - or near the end - of projects!
Is anyone else encountering this? Anyone able to replicate it? Anyone know how to fix it? I'm really reluctant to continue on with the Phone version of this project until I know I won't keep encountering this sort of thing...
Any help would be appreciated.
Thanks.

In the words of Gomer Pyle, "Well Golly!"
Thanks. lol

Published Course (Captivate 8) not displaying at correct size on Android tablet (HTML5)

I am now publishing my system simulations as both SWF and HTML5. They are set to NOT scale as they should fit correctly on all my client's screen resolutions. The simulations are built at 1006 x 627 pixels.
When uploaded to the LMS and tested on various devices everything displays OK on PC (swf) and ipad (html5) but I'm having issues on Android 4.1.2.and 4.2.2 (Chrome 37).
The whole of the simulation screen should be visual on the Android tablets which have a screen resolution of 1280x800. When taking into account the player top and bottom bars I still have 656 pixels to display the course content. However the 1006 is scaling to 1280 making the course height too high and dropping off the bottom of the screen.
If I publish with 'scaling' turn on the course now fits on the Android screen correctly i.e. height correct with spare width, but on non Android devices i.e. PC with high resolution, the course is now scaling up.
Why is the course not locked to correct size in Android?

Hi,
I have added two images, one from the Android tablet which is stretching the slide to fill the screen width and another from a high resolution PC which is showing the simulation as the correct size.
The android device is 1280x800, the simulation is 1006x627
Trevor

Why are images not displaying at correct resolution in emails?

I've just upgraded to Windows 7 (64bit).
Thunderbird is not displaying images at the correct resolution: images that I insert into the body of an email and images used in my signature.
The images appear larger than they should and pixelated.
It seems that images are not displaying at the correct resolution inside my emails, whereas in other programs on my machine images are displaying correctly.
When I insert and image into an email using insert>image, the resulting "Image Properties" window displays the image's dimensions correctly. This confirms my suspicion that the resolution is not displaying correctly inside emails (a lower resolution than elsewhere on my screen, which would explain why the images appear bigger and pixelated).
I'd appreciate any help in fixing this problem.
Regards,
Catsix

Hi Zenos,
I've discovered what is causing the problem, but I still need a way to fix it, if possible.
The cause of the problem is that in Windows 7 Control Panel > Display I have set the size of "text and other items" to 150% (otherwise everything is much too small too read on my screen's recommended resolution of 1920×1080).
I discovered that Irfan Viewer was also displaying at the incorrect resolution, but I managed to solve that problem by right-clicking on the IrfanView.exe icon and following Properties > Compatibility and selecting "Disable display scaling on high DPI settings".
I tried the same procedure with Thunderbird, but it made no difference. It is still displaying at the incorrect resolution.
Any suggestions?
Regards,
Catsix

Purchase order history not displayed in correct sequence

Hi all,
We are on SRM 7.1 ECS.
The issue we are facing is that the follow on documents for the PO i.e.
confirmatin and Invoice are not displayed in the correct sequence i.e. the sequence in which the documents are displayed is :
Invoice>confirmation>shopping cart-->PO
Any idea if this is a std feature or a bug?

Hi
Pl find the content of the notes.
Note 1524928 - History: Order of related document is not consistent.
Symptom
In some cases, when you go to the shopping cart item history, the system displays follow-on documents in a wrong order.
Other terms
History.
Reason and Prerequisites
Program Error.
Solution
Implement the attached correction instructions or apply the relevant Support Package.
If the note is not released , pl raise a OSS to get this note released.
Regards
velu

Webview not displaying reports correctly

Similar Messages

Maybe you are looking for