Webview not showing real time reports

Hi,
I have a customer with IPCC Enterprise 7.5 and using the Webview for reporting. The Real Time reports are empty although campaigns are running and agents are logged in. The Historical Reports works absolutely fine. I noticed that for the dialer port status report, I had to enable a setting through the registry, according to the following document:
http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a00801dc6cf.shtml
I changed that and then the Real Time report for the dialer port status works. Nothing else from the Real Time reports returns any data.
Thank you,
Agelos

We are using only the Outbound option, so it's only for the outbound. It doesn't give me any Real Time report except the dialer port status. It doesn't return any error, but the report is empty.

Similar Messages

  • UCCX 10.5 Real Time Report shows "Not Connected"

    Hi,
    UCCX 10.5 HA over LAN.
    As per the title, RTR shows Not connected for both nodes and no data shown for all reports. all services are In service in both nodes. 
    Any Ideas?
    Regards.

    Hi Mohamed,
    Are you accessing this via the IE or FF? If so which version?
    The Real time reporting on UCCX connects to the RMI port 6999 to pull the information on the Engine. If there are no port blockages or if there are no issues with the browsers, then it is a problem with the configuration files in root holding this information which needs in depth analysis.
    A restart of the Engine also should help. I know that everything is IN SERVICE, but I have noticed a lot of issues on UCCX 10.5 when there are stuck calls on the system, it impacts RTR with the midnight stats reset.
    The reset of the Engine is bound to clear all the stuck calls in the system and this may be a side effect of the stuck calls on the system especially if the RTR was working before you noticed the problems.
    Regards,
    Arundeep

  • Not able to run Real Time Report(Live report)

    Hi all,
    I am working on a report which need to be run on real time, i am facing difficulty while running it at my end(India),
    getting error as View Display Error whereas my counterpart in United States running at her end getting the result easly,
    server is located at United States,we share the same internet speed,I tried different means by putting appropriate filter
    in order to reduce the data size but still couldnt see any result. Can anyone please suggest me what is the issue
    and what need to be done in order to get the results for real time report faster at my end.
    Thanks for help.

    A couple of suggestions.
    First, make sure you are reproducing the report conditions as well as the user access settings. Different user access can make a big difference in report performance.
    Second, enter an SR with Oracle support. They may be able to help troubleshoot connection issues.
    When we see dramatically different response times in different locations, this usuallly means a network issue. It may not be in your corporate network, but somewhere between you and the data center.

  • UCCX 7 (SR4) - real time reporting based on option choosed

    hello,
    i would like to extract real time information on wich option the client choosed on my uccx7 script. I know where to get in the database some info from the queues (Summary Tables), and i would like to make some custom real time reporting based on wich option was choosed to know how many callers choosed the voicemail option (so the call won't show up as abandoned).
    Is there any way to get real time info from a custom variable in real time? in wich table?
    thank,
    met.

    IVR selections are not recorded within the CCX databases. You would need to save this to an external database and report from there. Your only method of capturing this within db_cra would be to store a value into an enterprise data variable which can be seen on historical reports.
    Also, the only tables that are "real time" are those identified as such: RtCSQsSummary and RtICDStatistics for use by wallboard applications.

  • CUIC Agent Real-time reporting reason code

    Hi,
    In CUIC agent real time report reason code for not ready it shows 50002 or integer we have configured in ICM.
    How we can display reason code as name which we have configured in icm like tea, coffee , meeting.
    CUIC version we are using 8.5.
    Regards,
    Dinesh Joshi

    The way I got round this was creating thresholds - eg 1 = Lunch 2 = meeting etc.
    this does work, however you can't then Threshold the time on those particular texts, but at least you can see what 'state' they are in.
    let me know if it works..
    Thanks Sarah

  • Real-time reporting issue

    In UCCX7 admin real-time reporting, the status box always shows "not connected" so we're not able to run any real-time reports.
    Why is this status box showing "not connected"? and how do I resolve it to be able to run real-time reports?
    Running UCCX Admin v7.0(1)

    No it's certainly possible.  I would try that first, see if it's working at all.
    Sometimes, running this page from an end user PC, can fail if your JRE is not the right version.  One way to find out if that is the case:  uninstall your java, reboot, then launch the RTR page and it will automatically isntall the correct version for you.
    Try these, and report back.

  • Windows 7 offline files do not sync real time while online?

    I have network folders setup for use offline. When im online and another user deletes files from those folders, i dont see those deletions until i reboot or force a manual sync. How do you make that to show real time. So that when another user deletes files
    in folders i have set to use offline... however im online connected/authenticated to the network, i can see those changes real time.
    thanks,

    Wow, nearly two years since this question was posted and still no worthwhile contribution from Microsoft. 
    We are also seeing behavior similar to this.  We're running Windows 7 clients on a SBS 2011 network.  We are not doing folder redirection, but rather we have users taking certain file shares offline to work from home or on the road (works much
    better/faster than the VPN).  However, when they get back to the office occasionally they find themselves editing the same file another user is, or referring another user to check out a file they created while offline which is not actually in the share.
    Turns out their PC is using the local cache and not the network cache for some file access, but it insists that the user is working online.  Typically if the user forces a manual sync and resolves any conflicts or errors that arise, they can be 99 percent
    sure they are working online for real, but without double-checking against open files on the server there's really no way to know for sure.  This has absolutely destroyed user confidence in this technology which used to work OK (where this is concerned
    anyway - it still had some flaws) in Windows XP. 
    I saw a post in the partner forum where a moderator basically said "oh yeah, I can totally reproduce that in my lab and that's a shame...try Sharepoint."  Absurd.
    Seems like Microsoft is basically taking the stance that Offline Files is only worth using for folder redirection where only one user is likely to be using the files.  If that's the case then as long as the data syncs eventually it's probably not
    a huge deal that this happens.  If, however, you're using Offline Files to sync a shared directory this can have disastrous consequences with documents being edited simultaneously for hours or even days before finally someone realizes the problem and
    then one user or the other gets to redo their changes.
    If they can't make them work right, then they could at least give us more transparencey so the user can see what's going on.  I hated the stupid "you are now working offline" popups in Windows XP as much as the next guy, but I'd kill to get them
    back now, if only to avoid this stuff.  When a user browses to their share that's been made "always available offline" and it says "Offline status: Online" then it should be using files from the LAN, not the cache.

  • Real Time report statistics report - UCCX IPPA

    Hello All,
    Real Time report statistics on IPPA agent phones refershing after 3 - 4 mits, Please hlep to resolve this issue.
    Thanks,
    Murali.P

    I'm not sure I understand you, on the CTI topic.  CTI is a fundemental protocol when it comes to CUCM/UCCX, which is the future of telphony.  No old school PBX's here, just packets.
    I was just looking at the UCCX 9.0(2) REST API and it looks like there are some stats to be farmed there, however, it's so new, I cannot really speaek to it from experience.
    Check it out:
    http://developer.cisco.com/documents/11218258/11219470/Cisco-uccx-developer-guide-902.pdf?redirect=http%3A%2F%2Fdeveloper.cisco.com%2Fweb%2Fuccxapi%2Fhome%3Fp_p_id%3Ddoc_library_summary_portlet_WAR_doclibrarysummaryportlet_INSTANCE_b8N60ctZVvHc%26p_p_lifecycle%3D0%26p_p_state%3Dnormal%26p_p_mode%3Dview%26p_p_col_id%3Dcolumn-5%26p_p_col_pos%3D1%26p_p_col_count%3D2
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Real Time Report Placed in iFrame and then Within a Web Applet

    Real-Time Reports built and executed BI tool retrieve real-time updates. However, when report URL is placed within an IFRAME and that is then placed in a Web Applet and the Web Applet is placed within a Page Layout Section, the real-time report no longer retrieves real-time updates.
    Do you have any ideas as to why?

    Hi Don,
    Thanks for the reply.  I had downloaded a set of samples from SAP and I have looked through a few of the set you supplied.  I am worried that I'm going to have some trouble because the samples have the reports loaded as part of the solution but I was looking to create a more generic viewer.  I don't want to have to reprogram for each and every report that is created.  That is why I was trying to use the generic parameter dialog.  After the Report Load Failed dialog comes up, it does bring up the parm dialog and hits SQL Server just fine.  Yes...the reports are passing Parms to Stored Procs in SQL Server.  The report has default parameter values. 
    What I am trying to do is search thru the application folder and gather the names of the reports located there and fill the combo box with the names of the reports.  Then the user should just be able to select a report and run it.  I can't save the data in the reports because they must be ran per the requester's date range and other desired parameters.
    Does this seem valid or am I going to have to program for EVERY single report and reprogram/recompile for every report added?  Not particularly what I want to hear.   I would have used the standard Crystal Report Viewer and had the users use that but it doesn't seem to allow you refresh the data from the viewer.
    Thanks for your help,
    Chris

  • What is the sql query for the real time reports Resource Stats?

    Does anyone know what the query is that the real time report tool uses for the Resource Stats page?  Trying to develop a custom report that displays similar information that is updated regularly.

    Hi,
    009 wrote:
    Hi Frank,
    Just wanted your opinion on the above given SQLI'm not sure I understand it.
    I added some more formatting to help me read it:
    SELECT      A
    ,     CASE WHEN LAG(A,1) OVER (ORDER BY A) IS NULL
              OR A=LAG(A,1) OVER (ORDER BY A)
              THEN LAG(B,1) OVER (ORDER BY A)
         END B_LAG
    ,     B
    FROM     (
         SELECT A, B
         FROM
              SELECT '1'A,'Apple' B FROM DUAL UNION ALL
              SELECT '1'A,'cat'B FROM DUAL UNION ALL
              SELECT '2'A,'bat'B FROM DUAL UNION ALL
              SELECT '3'A,'rat'B FROM DUAL UNION ALL
              SELECT '2'A,'yellow'B FROM DUAL UNION ALL
              SELECT '1'A,'pin'B FROM DUAL
         CONNECT BY PRIOR A=B
         ORDER BY A
    );What is the purpose of the CONNECT BY in what you have so far?
    Is the idea that you will add another CONNECT BY query, using
    CONNECT BY  b_lag  = PRIOR b?
    Do you think that will be better than using ROW_NUMBER?
    Will it work if (a, b) is not unique?

  • Jerky and "Not In Real Time"

    Why is my footage in AF 5.5 jerky and why do I get a message in red saying"Not in Real Time"?
    Any ideas please?

    You're not giving us any information to work with to help you. We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
    I'm going to take a guess, and I'm guessing that you are previewing by pressing the space bar. Don't do that. Use RAM preview to get real-time playback of previews.
    Start here to learn After Effects: http://adobe.ly/bjBT3P

  • Option claims from CRM are not showing in BW report.

    Hi All,
    We are having a problem with BW report. The report shows all the claims thatt are created in CRM system( spource sys- CRM). We notices that claims that are called as option claims are not showing in BW report, but they are present in BW. I have checked filters in report design. no filters exist. Where they are getting filtered out. Please help me.
    Haaris..

    Hi,
    I am giving you ore information on the above issue, the above query is running on an infoset, I realized, data is missing from infoset. Where as the data is present in DSO.
    The other thing I can see every other claim in BW, but I cannot see Option claim which are very less compared to other claims.
    The infoset has four DSOs and one characteristic as components.
    Please let me know if you get any idea?
    Haaris.

  • UCCX 9.0 real-time reporting

    Hi,
    I need information about UCCX 9.0 real-time reporting. What are the real time reports available on UCCX 9.0.
    How to run this real time reports.
    Regards,
    Dinesh Joshi                  

    Hi Dinesh
    It's similar stuff to what you get in the Historical Reports - e.g. number of contacts, abandons, available agents, state of agents etc etc but counted up for that day and shown in real time. They're very basic looking tabular data type report generally, Supervisor can do some basic charts but nothing exciting and they aren't designed to be exporable.
    Is there something specific you are looking for?

  • I bought a Unlocked IPPHONE 5s from UAE store online and using it in Pakistan , but its not showing face time

    I bought a Unlocked IPPHONE 5s from UAE store online and using it in Pakistan , but its not showing face time even i checked out Builtin apps from UAE site for ipphone 5s and its showing face time app  , please help regards How can i use face time

    Phones purchased in UAE do not have facetime installed because it is banned in UAE and several other countries in the area. It's not just a network block; the capability is missing from the phone.

  • How to make real-time report per subscriber ( SCE2020)

    From the link below Cisco SCA BB SNMP Real Time Monitoring User Guide, 3.1
    http://www.cisco.com/en/US/products/ps6135/products_user_guide_chapter09186a008084ddc8.html
    it only make report on the global bandwitdh does anyone have i 3rd party software or good document on how to do snmp real-time report per subscriber?
    Thanks in Advance.

    SCE platform supports a limited set of variables that may be configured via SNMP (read-write variables). Setting a variable via SNMP (as via the CLI) takes effect immediately and affects only the running-configuration. To make this configuration stored for next reboots (startup-configuration) the user must specify it explicitly via CLI or via SNMP using the Cisco enterprise MIB objects.
    For the further details for the SCE follow the below url which will help you:
    http://www.cisco.com/en/US/products/ps6134/prod_configuration_guide09186a008078b43a.html

Maybe you are looking for

  • Crystal Reports XI  stopped working error message on a Windows Server 2008

    We recently installed Crystal Report XI  in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message: "Crystal Reports has stopped workin

  • Ipod stops syncing after about 11gb on data transferred

    ok, my ipod stops syncing after i transfer about 11gb of data. my music collection alone is 12gb, i also have alot of photos and videos and other contents. it doesnt matter which format the ipod is in, mac formatted or windows formatted its the same

  • I can't get Finder v. 10.6.8 to work. I have a MacBook Pro with OSX v. 10.6.8.

    I recently had a hard drive crash. The tech installed a new hard drive and I was able to re-download most of the applications I use. Now, several weeks later, my Finder no longer works. I also can't open any document folders that are on my desktop. I

  • Displaying a temporary image over another image

    Hello, I am writing a program where I need to draw a filled rectangle over another image then disappear (without drawing on to it). The Image is on a JPanel. Obviously I can not use Graphics.drawImage because that will permantley draw the rectangle o

  • Why does Safari automatically uninstall plugins?

    Whenever I install the Zotero plugin for Safari (here) I find that it is automatically uninstalled within a day or two. It doe snot appear to occur simply by restarting the browser, however I invariably will need to reinstall the plugin every other d