Webview on menue buttons broken in r25

Hello,
any information why the behavior of custom menu items configured as webview have totaly changed ??
up tp sprint 24, external http:// or https:// links pointing to an customer selfeservice system, where kept and displaied within the app, now they open a
safari browser instance, even without the notification of exiting the app.
thnx for any information, how to address this problem
kind regards
Michael

Hello,
thank you very much. We confirm the fix of the problem.
kind regard
Michael

Similar Messages

Menu button unresponsive - other buttons work fine!

I've tried resetting and restoring according to the Apple instructions on the web ( http://www.apple.com/support/ ), with no success.
I can play music, scroll up and down menus and other navigation, but since I can't use the Menu button, I can't navigate UP levels through the menu system. So what I have to do is go through the songs in my selected menu area, then when it completes it returns to the menu and I can then navigate DOWN to where I want.
Is my menu button broken?

dunno if you'll ever read this as it was a while since your original post, but my centre button is broken: it is stuck into the ipod and won't click properly- do you think that there is a similar problem to what happened to yours?
I'm in the UK and not too sure to send it to get fixed though!
Any help appreciated

I think the MENU button of my apple remote is broken. No infrared signal.

I think the MENU button of my apple remote is broken. All other button works perfectly except for the menu button. I used a digital camera to test the infrared signal from the remote, all other buttons emit infrared except the menu button. What can I do? Out of warranty already. Is it time to throw it away? If its a hardware issue, can I fix it? Or are apple remotes disposable?
The remote is only seldom used so I dont know what caused the menu button to break. Please help. I hope I won't need to buy a new remote.
TIA.

Sounds as though it is broken if you've tested for the IR signal.
I have several white/grey remotes - some of the white ones have buttons that barely work and require very firm pressure to actuate. I think they do tend to wear out to be honest but others have no issues.
I actually prefer the older white remotes to the grey ones which seem to have less range and a narrower usable angle.
If you have an iPhone/iPad there's a free Remote app you could use provided you can use provided you can access Setting if you need to.
Apple sell the remotes quite cheaply, though you could also consider a multi-function remote or train AppleTV to use a different remote.
AC

Android 3 and menu button

Hi,
I'm trying to use native menu button on my asus transformer (android 3.2).
With honeycomb devices, Menu button appears only when needed (not like android 2 devices). With Air application, menu button won't appear. I try on tour de flex. Menu button is always here but not used. I try devgirl sample, button doesn't appear. I think it's a Air3 bug (Bug submitted https://bugs.adobe.com/jira/browse/SDK-31768).
Can someone help me ?

This was noted and logged for the AIR2.7 SDK but based on below, Adobe cannot replicate although I am not sure they understand the issue. If you use 2.6, it works, anything above that and it is broken.
https://bugbase.adobe.com/index.cfm?event=bug&id=2936827

My mini's menu button broke!

My ipod mini is pretty old (8gb 1st generation), but it's given me very few problems since I bought it. Last week, it went through the washing machine, and we thought we fixed it by sucking the water out with a vacuum and then letting it sit in rice for a few days. It worked perfectly for about 2 days, and then the menu button stopped working, and the ipod was stuck on shuffle. I plugged it into the computer for a bit and it went back to the main menu screen, but the menu button still isn't working when I disconnect it. This means I can't go back once I choose a song, it's stuck there, and I can't reset my ipod either. HELP!

Unfortunately the only way to put the iPhone in recovery mode is by using the home button. If it is broken you won't be able to do this, I'd suggest to get the iPhone replaced by Apple.

Menu button isn't working,

the button under the screen is stuk so i can't close any program's i used... i opened a app that i buyed but can't closed it anymore. the menu button is stuck in the ipod. what should i do now?

-See:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 you can use Assistive Touch which adds screen buttons: Settings>General>Accessibility>Assistive Touch
- Apple will exchange it for a refurbished one for:
Apple - Support - iPod - Repair pricing
- A third-party place like the following will fix the switch for less.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My wifi menu is broken

My wifi menu is broken and if press wifi network menu.. only a blank box with exclamation mark comes with a ok in it.
The previously configured and saved wifi is working.
Kindly give a solution to this.
Solved!
Go to Solution.

I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Apple Remote Menu button not working on 80gb Classic iPod

The subject pretty much sums it up, I tested the Menu button with Frontrow and it works as expected...is my dock broken or is the iPod bad?
Thanks for your suggestions.

Wow. So, they sell it with a device that is made for iPods.
They put a button on it that reads "Menu", just like the button on the iPod, but doesn't provide the same function, in fact, no function at all, while it would be great if it HAD this function.
Interesting. I don't think even Microsoft would dare to pull this one off.
It's tricky, but anyone who can sell me this non functional button as a "feature, not a bug" is definetely on their way to a great career start...salesman, Apple spokesperson, politics

HT5437 Menu button doesn't pull up menu....all I get is the slideshow moving through apple's photos...help!!.

Menu button doesn't pull up menu....all I get is the slideshow of moving apple's included photos...HELP!!!

Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Using a custom menu button on the slide to open and close TOC in Captivate 7

HI
I have a custom menu button. When the user clicks I want to show TOC, ( I see there is a state to show TOC) but when the user clicks the same menu button again on that slide how can I hide the TOC. ie toggle between hide and show.
thanks

I described some possible scenarios: Toggle Shape buttons - Captivate 6 - Captivate blog

My ipod touch 4th gen wont leave the app when I press the menu button, what do I do? How do i fix it?

When I use my ipod touch and am trying to leave an app, my ipod wont wont leave unless i keep pressing the menu button. This happens alot during snapchat and my friends ask me why I screenshot so much. And I dont screenshot at all. Why is my ipod doing this? Can it be fixed?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I have downloaded updates for Firefox but my browser doesn't look like it should, no single menu button etc, how do I get it to look like your demo?

The last few times I have been prompted to update my firefox for desktop, my browser has not looked any different even though I get notification to say updates completed successfully. When I update firefox gives a demo of new features and how my browser should look, mine has not looked like the demo for the past few updates. It's annoying because I really like the look of having just one menu button. How can I change the look of my browser?

The Firefox button displays by default only in Windows Vista and Windows 7. You '''''can''''' have it display in Windows XP
'''Menu Bar'''<br />
*right-click empty space at the end of the Tab Bar, click "Menu Bar" to place a checkmark
*Menu Bar checked = Menu Bar on; Firefox button off
*Menu Bar un-checked = Menu Bar off; Firefox button on
*Other methods of doing the same:
**click Firefox button > Options, click Menu Bar
**Quick toggle Menu Bar on/off: ALT+V+T+M
To have the Menu Bar '''''temporarily''''' display when the Firefox button is on, press the ALT key or the F10 key to make the Menu Bar appear and use your mouse to make selections from the temporarily displayed Menu Bar. Why would you want to do this? The selections available are different.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Won't open homepage on open, won't open web pages from the menu 'open new window', Can't open menu button

Ok, since update to version 31.0, I have been having some problems.
I have tried doing everything stated in the support page about resetting, reinstalling, safe mode, restarting pc etc.
First problem, when I open Firefox no web page loads. It just says New Tab and a blank white page. If I press the home button I am taken to my homepage which is google.
Second problem, when I right click on a link and the menu pops up, if I click open in new window, a new window opens but it just says New Tab with a blank page and no URL information, just blank.
Third problem, the Open Menu button just doesn't work at all. You can click all you like, that thing is not opening.
I am really stuck as to what to do. I have only been using Firefox for about a month and t was good until these problems. If I can't resolve it, I will have to use another browser as it is really annoying.
I am using Windows 8.1 by the way and have scanned my computer thouroughly for both virus's and malware.

Hi zenithtwc, to test whether this is a settings issue, could you do a three-minute experiment?
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
''Don't delete anything here.'' Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like Test731, and skip the option to change the folder location. Then start Firefox in the new profile you created.
Can it reach the internet?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

General Error or Crash using menu button on chapter playlists

This is my first complex project in 2.0 - I needed to have approx 120 clips playable individually from a series of still menus. Given the 99 timeline limit, I created a number of timelines and placed batches of clips on them. I'm then using individual chapter playlists to reference each clip. The chapter playlist is linked from a menu button.
When using the menu remote button when a chapter playlist is playing, I either get an 'abnormal condition' error, or occasionally, Encore crashes with no message at all. Tried this with no menus, timelines and playlists open but same errors.
More detail:
PAL 16:9 project
28 timelines
65 chapter playlists
15 still menus
approx 120 mpv clips and associated wavs (mpv encoded with cinemacraft encoder sp)
Settings for one of the clips giving problems:
Timeline - end action not set, menu remote - return to last menu, all ops permitted, no chapter end actions
Chapter playlist - end action - return to last menu, override not set, menu remote - return to last menu, all ops permitted.
I think I can stop the errors and crashes if I disable the menu remote button - but I don't really want to do this.
Any ideas what's going on? Is it a bug(S)?
Thanks,
Paul.

Paul.
The trouble I had was the "Abnormal Condition" error when hitting the menu remote button in preview.
There was no problem with Prev/Next buttons though.
I tried burning a disc too, just to check if it would burn true & just played up in preview - but no dice. What happened was the player froze up solid after pressing the menu remote.
I did create another project where the chapter playlists numbered around 28 from a single timeline, and this actually worked as it should do, so I suspect an issue in Encore's internal stacks where this is all addressed.
I had to use a different application in the end.
I believe the reason yours is still failing is simply because despite having 5 timelines, you are still well over the number of chapter playlists that seem to be available.
It's a nasty bug - but apparently a fix is in the works. Hopefully we will see this as a maintenance release - we got these with both earlier versions (1.01 from 1.0, and 1.5.1 from 1.5) so I am hoping it will happen.
There are a couple of issues I have noticed - although this is so far the only one I cannot work around in my projects.
One thing has just occurred to me that might help you here.
Instead iof using a chapter playlist to reference each clip, save these for multiple clips that need to be accessed, and from your chapter menu, just point directly to the clip in question.
Set an end action for each clip to revert back to the menu that called it, and create just a single chapter playlist for a "Play All" situation.
This will greatly reduce the number of chapter playlists you are running - and should do the job for you.

Command is not showing in to the list on pressing menu button on the device

Hi Everyone,
I have developed a midlet in which I have designed buttons or links using Custom Items. Command associated with the custom item is not showing in to the list on pressing menu button on the device 8300 Curve.
For example - My login screen have SUBMIT and RESET custom items. I have designed them to be appear like links [no matter how I design them]. I have also added a command and listener to it like as below:
CMD_SUBMIT = new Command(text, Command.ITEM, 1);
setDefaultCommand(CMD_SUBMIT);
setItemCommandListener(this);
On running the midlet, my login screen appears. But when I travarse to the SUBMIT item, and press the menu button, my command doesnt appear in the list of commands. It shows only the Close command. I am not getting why this is happening.
Please do me a favour and help me to sort out this. On other phones like 8520 curve the command is appearing in to the list when I press the menu button.
Regards

Is there any way to sort out this issue? I am not getting the cause
behind this, and I am observing this only on 8300 Curve. On most of
there phones [though not tested on every one] it is working as expected.
Please guide me to proceed further. I am desperately waiting for the
response. Regards.

Webview on menue buttons broken in r25

Similar Messages

Maybe you are looking for