Webvpn GW's on one router with domain names

Hi,
I'm trying to configure multiple WebVPN gateways on one router using one front door VRF and multiple back door VRF's. Think of this like a cloud service provider with several customers using different VRFs and one Internet VRF used for the incoming connections for the remote users.
Doing so, several scenarios arise:
Using one gateway and several context with a seperate VRF for each.
Please let me know if I am wrong here:
I can only assign one trustpoint because I only have one gateway. This means that all users connecting can only use one domain name like "*.isp.com". This also implies the use of a wildcard certificate.
Using several gateways and several context with a seperate VRF for each.
I can only assign multiple trustpoints because I only have one gateway. This means that users connecting can use multiple domains name like "webvpn.clientA.com" and "webvpn.clientB.com".
I would prefer the first situation but then I run into a second problem:
There are several commands related to hostname and up till now I have not figured out which one does exactly what:
ROUTER(config)#webvpn gateway WEB_GW
ROUTER(config-webvpn-gateway)#hostname
ROUTER(config)#webvpn context CUST1_CT
ROUTER(config-webvpn-context)#gateway WEB_GW domain
ROUTER(config-webvpn-context)#gateway WEB_GW virtual-host
Is there anyone who can explain to me what exactly does what?
My personal guest is that I only need to configure the virtual-host like this" CUST1_CT -> virtual-host cust1.isp.com and CUST2_CT -> virtual-host cust2.isp.com". But I'm not sure about this and up till now I have not found any documentation that describes this very clearly.

I think for this to work correctly and be able to split traffic between the 2 ISPs, you would need to use BGP, because default is going to use one ISP or the other.
If you can use BGP, this link will help you in load shearing between multiple ISPs when you have one router.
http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13762-40.html#conf4
HTH

Similar Messages

Get the pc name with domain name and add it to my properties file using commands

i want to get the pc name with domain name and add it to my properties file using powershell .
sid

function Get-Environment{
[environment]|Get-Member -Static -MemberType Properties |
ForEach-Object{
if($_.Name -ne 'StackTrace'){
$v=[scriptblock]::Create("[environment]::$($_.Name)").Invoke()
New-Object PsCustomObject -Property ([ordered]@{Name=$_.Name;Value=$v[0]})
Get-Environment
Get-Environment | Out-String | Out-File environment.txt
¯\_(ツ)_/¯

Problems hosting iWeb with domain name.

I have a business web site that I host with iWeb08 using a domain name. I had the domain name working perfectly with iWeb. I would log on to my web site via my domain name and all my content was there as I expected. Whenever I upload a new addition to the web site I always click "view published site" which is taking me to http://web.me.com/username/pages and everything is there as I expected it. Recently, I went to my web site via my domain name and realized that all my recent updates are not being hosted online (with domain name). web.me is fine though. I checked the registration on my domain name and it is active. Any thoughts? Thanks in advance
Message was edited by: Bob3hills

I went to my web site via my domain name and realized that all my recent updates are not being hosted online (with domain name). web.me is fine though. I checked the registration on my domain name and it is active.
Are you using url forwarding? If so, perhaps you changed your mobile me site in a way that requires you to change your forwarding as well.
Could you provide both urls so we can see the differences you are talking about?

Is the Oracle apps R12 can be installed with domain name like xyz .co.nz

Dear all,
I am installing R12 on Linux AS-4
I need to know the Oracle apps can be installed with domain name like <xyz>.co.nz on Linux AS-4 environment.
if so please discuss anything other than normal procedure I have to take care?
Till now I have installed much with Domain name as <xyz>.com
Thanks and regards
Vasu

If your domain name has two characters, then you may run into the Microsoft IE 6 bug "Internet Explorer Does Not Set a Cookie for Two-Letter Domains" described in Microsoft article Q310676. The fix for this issue is described in the Microsoft article.
Internet Explorer does not set a cookie for two-letter domains
http://support.microsoft.com/default.aspx?scid=kb;en-us;310676
Apart from the above, you should not have any issue.

Multiple WAN connections all through one router with load balancing?

I am setting up a network in my dormatory for myself and about 20 friends. about half of us have DSL connections at the moment. Is there a way to have all the DSL connections (possibly run through cheap home DSL routers) all connect into a cisco router that then acts as the gateway for our entire network? woudl it be possible for each internet request to go out over the connection that has the least load AND also be able to use some sort of load balancing, so one user cant use all of the outgoing/incoming bandwidth?
If you have any ideas please let me know

Hi Ian,
To get this working, you would either need to use something like PPP to bundle your links together or use a dynamic protocol.
In bundling the links, you could make them appear as one link, with a single IP address each end and the router takes care of distributing the load. To implement this though, you would need control of both sides of the link, or be terminating with one carrier who is happy to implement this for you.
The second is to use a dynamic protocol (such as eigrp, ospf, etc), which can build up a map of the network to router from point a to point b. For this you also need control of the link.
I can't think of another method, unless you can control the link from both sides. Your other option it to pool your money and buy a larger link or a leased line. If you bought a leased line or two, your carrier would be more than happy to talk to you about routing over that, but generally you're looking at mega bucks for that.
HTH,
Mark

2 CUE NM in one router with CME

Is it possible to have additional 1x NM-CUE-EC to the existing CME router with 1x NM-CUE? If yes, how do we define which extension goes to which CUE module? should the extensions number be in sequence?
Please share your experience. Thank you in advanced

Here is some supporting documentation that states that multiple CUE modules are not supported.
http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_implementation_design_guide_chapter09186a00804993bd.html#wp1008390
The document definitely says (upto CME 3.2 and CUE 2.1). So I am not sure if any thing has changed after these versions ( i doubt it)
Another comment from Aaron Harrison on this a while ago, when I had the same question on using two CUE modules was to,
set the voicemail pilot to an AA script which would play wave files just like CUE voicemail and then look up the calling number and based on a script rule, check if the user belongs to the local CUE or not and if it belongs to the remote CUE, you may redirect the call out to the second CUE's pilot number. This will work fine, but still it may be a unsupported configuration from Cisco.

IWeb site with domain name

I have created a website using iWeb and have uploaded it to my .Mac account. Now I would like to create another one but use my own domain name. Can I do that?

Yes. Create a new site and then use domain forwarding from where you bought the domain name to forward that domain to the url of your second site.
I use iWebSites to manage multiple sites much like iPhoto Library Manager and multiple libraries. Here's how I do it:
One way to handle multiple sites is to use iWebSites. It lets me create multiple sites and multiple domain files. If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites.
It allows me to edit several sites and then publish only those I want to update. I can keep the changed sites unpublished as I see fit.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

One Arm config Domain Name Content rule

Hi Guys
How does domain name content rule works in one arm config.
What do we put in source groups as VIP address.
Does it need host headers in WebServer as a requirement.
How does the client request gets completed.
Any help much appriciated..

Thanks for your reply Jim,
This is what I am trying to do in a One arm config topology
( As the CSS guide ( cntntgd.pdf ) says under Configuring a Domain Name content rule)
The CSS allows you to use a domain name in place of, or in conjunction with, a
VIP address in a content rule. Using a domain name in a content rule enables you
to:
Enable service provisioning to be independent of IP-to-domain namemappings
Provision cache bandwidth as needed based on domain names
So I am trying to create a content rule with a domain name instead of VIP address. For ex.
content domainRule3
protocol tcp
port 80
url "//domain.com/*"
add service Serv1
active
group servers
add destination service Serv1
VIP address ???????? ( what shd we put in here )
In this case what do we put as VIP address in source groups and how does the traffic flows from Client to actual Server in One arm topology. I am trying this topology where we have multiple sites configured with the same IP address with host headers
My assumption is that I shd configure DNS servers with VIP address for domain.com and use that as VIP address in source group. But how does the actual traffic flows from client to servers
Many thanks.

Connecting to Wireless Network with domain name and proxy servers?

Hi,
I'm trying to connect to the wireless network at my college, however it's not as straight forward as usual... The network is hidden, although I know to 'Join other network' and type in the SSID of the network and then set the authentication method to WPA-Enterprise. However, this is where I run into a problem..
To connect, I need to 'configure encryption as AES', which I'm not sure how to do on OS X. Furthermore, after signing in with my college ID I am required to 'Use the domain name [domain name]' and 'configure your browser to use the college proxy servers [example.example.net] on port [123]
Any help on this would be greatly appreciated as it's important that I log on to the network for work etc.
Thanks very much for your time.

johnthompson1993 wrote:
Hi,
To connect, I need to 'configure encryption as AES', which I'm not sure how to do on OS X. Furthermore, after signing in with my college ID I am required to 'Use the domain name [domain name]' and 'configure your browser to use the college proxy servers [example.example.net] on port [123]
The encryption should be configured automatically. To use the proxy:
1. Open System Preferences
2. Click on Network
3. Select Airport from the list on the left
4. Click on Advanced, near the bottom right
5. One of the tabs will be called Proxy. Configure your settings there.

IWeb: Won't publish (update) with Domain name

I have a site that I have used iWeb to create. I recently, got a domain name from www.godaddy.com. I have had it for a few days, and I have had a some things go wrong. First, the web counter that iWeb provides, doesn't work on my site. The counter will publish but it only shows one number (it doesn't go higher). Because it would not work, I decided to delete the counter from my site. Second, I tried to rename one of the pages from "My Podcast" to "Media" but when I try visiting my site, it still says "My Podcast," but when I click on it, a window shows up that says that Apple can't find the sight because it may have been deleted. So, I fixed that by making the page say My Podcast again (which fixed it). Finally, I tried updating some information on my site, and it says that the site published, but when I visit the site, it doesn't have anything that is changed at all.
I can't figure out what is wrong and I need some help. Thanks!

With rapidly reloaded pages, sometimes the browser will show you information from its cache in order to deliver the information to you as fast as possible. Unfortunately, with frequently updated pages, this browser caching strategy doesn't work so well.
To make sure that you are seeing the most up-to-date version of your website, try emptying your browser cache. In Safari, look under the Safari menu and select "Empty Cache". You can also try to add a "?" after your URL to tell Safari to ignore whatever is in its cache.
I have just checked your website and all the links look to be functional. So I am 100% sure that it is a caching issue for you.
As far as the iWeb hit counter goes, you are using domain forwarding with masking to hide the .Mac address. This masking feature prevents the hit counter from displaying correctly or at all. Disable masking and you will see your hit counter as normal. Even if it is not displayed, it will still be counting.

Having problems with maverick and outgoing mail with domain name

hi
i just upgraded my operating system from mountain lion to maverick. i did a clean install on a new hard drive.
anyways, my desktop mac mini computer using mountain lion is having no problems with my outgoing mail with my domain name.
smtp.1and1.com
custom port 993
SSL
password
using the exact same info on my laptop with maverick
no dice.
mail comes in but can't email out with my domain name
i tried - smtp.1and1.com:(email address)
any suggestions
thanks
phil

Hi, Phillip Chin.
Thank you for the question. The article below will help you troubleshoot the issue that you are experiencing with mail.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jason H.

Intel vPro with wired 802.1x issue with domain name

Hello guys,
this issue is may not related to SCCM directly, but intel forums are really poor so i´d like to ask here...
The Case: We are currently provisioning our vPro chips with SCCM SP2 R3 and almost everthing worked as expected (Provisioning OK, OOB Console OK, PowerControl OK even TLS and Kerberos are working. But there is an issue with the 802.1x authentication. It
seems the vPro chips are not using the correct domain name. Lets say our DNS domain name is
vpro.com and the NETBIOS Name is coprvro . There are no child or other domains. vPro chips are presenting now
vpro\COMPUTERNAME$iME instead of vpro.com oder corpvro
so the Radius Server (Windows Server 2008 R2 - NPS) is saying ReasonCode 7 "...domain is not existing...". AuthenticationType and EAP Type are correct. Usually user- and computeraccounts are using
corpvro as domain name.

Hi Dan,
thank you for your reply. I've already done this in the second place using the SDK and winrm ($8021XProfileInstance.GetProperty("Domain")). I've no idea were SCCM is getting this domain name from. Its cutting off the top level domain extension,
may be SCCM is assuming that this equals the NETBIOS domain name but that is not the case. This is only a guess, in detail I need to know in fact on what basis SCCM is choosing the domain name, then i can fix this...
Intels SCS putting the correct NETBIOS domain name in the amt config, used certificates are the same...

New database link gets long name with domain name

When I create a database link with a name "X", oracle renames it to X.regress.rdbms.dev.us.oracle.com
Why?

Check this thread:
REGRESS.RDBMS.DEV.US.ORACLE.COM concates to every databaselink name.

.mac does not work with domain name

I used Iweb 08 to host my domain name from godaddy.com.
Godaddy account is: http://www.eyalphotography.com/
.mac web page is: http://web.mac.com/enahmias
I published to .Mac and went through the personal domain name procedure (using .Mac account settings and godaddy CNAME) so now .Mac is my host and I don't upload anything to godaddy. Updates are made to .Mac. but even after 4 days when trying to go to http://www.eyalphotography.com/ I still get this message: “Safari can’t open the page “http://www.eyalphotography.com/” because it can’t find the server “www.eyalphotography.com”. If I go to http://web.mac.com/enahmias no problems.
I want my page updated to http://www.eyalphotography.com/ that is the whole point of doing the cname and forwarding my domain. People should just go www.eyalphotography.com and done.. not web.mac.com/eyalphotography etc.. it beats the purpose of this thing.
So any solutions why it’s not working?

Here is a step by step on how it finally worked for me.
1. From Iweb choose domain name
2. when logged to .mac click on domain name
3. If you have any troubled name there just remove it.
4. Create a new domain name and follow instructions until it says to go to your domain registrar and continue later
5. Log to godaddy.com
6. Under the Domains menu click on My domain names
7. Click on your domain name that you want to change cname for .mac
8. On the top third of the page in the middle click on Total DNS Control and MX Records
9. On the page that opens in the cnames section click on the Reset to default setting
10. Wait a few minutes, and then refresh the page. Then on the same section under www. click on the pencil icon to edit the cname
11. Leave www. alone and on the next line type: web.mac.com and ok the changes.
12. Log out of godaddy
13. Return to the .mac domain name dialogue box and finish according to the prompts.
14. Go back to iweb and republish ALL to .mac
15. In my case it took only a few hours and after 2 weeks of frustration it worked as magic.
Good luck
Message was edited by: eyaln

EA2: Code is generated for only one column with Domain check constraint.

I created a Domain with a Value List (Y or N - Yes or No) and used that domain for two columns in the same table. But for only one column (the last one) the check appears in the generated DDL.
After I enabled the "Use Domain Constraints" both checks appear in the DDL, but one as an inline check constraint and one as an "Alter table add contraint.."
Once I changed the naming Template for the check constraint, both constraints are generated as an Alter table clause. The inline check constraint is only generated when the name of the constraint (according to the template) is too long. It would be nice if I could choose if I want an inline or a separate check constraint definition.
Edited by: Roel on Nov 23, 2010 11:55 AM
Edited by: Roel on Nov 23, 2010 12:02 PM

I logged ER for that
Philip

Webvpn GW's on one router with domain names

Similar Messages

Maybe you are looking for