Week-Data view issue

Hello Experts.
In month dataview when we copy value from one KF to other via macro, it gets copied correctly, but when a week lies in two month, the values is not correctly copied.
Take e.g. of last week of Aug 2011, where it lies in Aug as well as in Sept. In Month dataview the values are copied corrected in Aug & Sept, but not in week view. Can anyone please help me, how to fix this. We want the same values in week data view too.
Regards
Rahul Chitte

Rahul
I think you will notice a difference between monthly and weekly views when the week falls in two months. Taking the same example that you have used , lets say the value for august month is 100 ( for the last week that falls in aug and sep the value is 25 + 35 for the 3 days of aug it is 25 and for 4 days in sep it is 35). So in the monthly view you will see 100 and this 100 will just include the 25 of the last week and the 35 will be taken into account in sep month. But in the weekly view the entire 25+35 (60) will show up against that the last week of aug and that makes perfect sense . If your doubt is still not clear , please elaborate your requirement
Thanks
Aparna

Similar Messages

Order changes in Monthly and Weekly Data View

Hi,
    I need some of your suggestions for my problem below:
I have a planning book with two data views (1 with monthly bucket and other with weekly bucket).Now I create three forecast orders in the weekly data view as below:
Quantity     Date
10         05.11.2007
20         12.11.2007
30         19.11.2007
So I can see the sum as 60 in the monthly data view. Now I try to modify (deduct by 5) the forecast order from the monthly data view. So the sum 60 changes to 55 but when I see the details of the order it looks strange to me.
11 26.11.2007
13 19.11.2007
13 12.11.2007
13 05.11.2007
5   01.11.2007
Please let me know what is the logic behind this?
But if I perform the above calculation for the category 'HG' as above I get the result like this.
Weekly Buckets
10 05.11.2007
20 12.11.2007
30 19.11.2007
Monthly Buckets
55 01.11.2007
Thanks,
Siva.
Message was edited by:
        sivaprakash pandian

Hi siva
This is possibly because of the settings in the planning area for the time disaggregation of the Key figure
Can you go Planning area administration and see what the setting is in the key figure disaggregation tab?
I think it needs to be P for proportional distribution and will use previously existing proportions for new quantities.
instead in your case it is ignoring previously exsisting proportions and distributing afresh. Am not sure what type that is (K?)
the F1 on the time based disaggregation field will give you a better idea.
if you want to know why the 11 and 5 are there at the ends and 13 is in the middle buckets, it is because the storage buckets for the weeks have 6, 7,7,7 and 2 days and 55/30 multiplied by these days is how the number are calculated.
there is also some help here
http://help.sap.com/saphelp_scm50/helpdata/en/73/3e1167347111d398290000e8a49608/frameset.htm

SNP Planning Book Capacity Data View Issue

Hi Friends,
In my SNP Planing Books Capcity Data View the total of Production Qty is not matching when I expand the Product wise view for Week 22 2011. Can some one help me to identify why this is happening?
Production Total Qty shown is 29618 but when I view Product Details it totals only 24650 but Total line shows 29618.

Hi,
In the standard SNP planning area 9ASNP02, the relevant KF in Capacity view is 9ACASUP .
There may be a conflict identified between selection and key figures to be read.
You can choose a different selection condition or change to a different data view, and check if ti comes out correctly.
Regards
Datta

Data view issue

I'm not able to see the node attributes in data view of adobe designer in SAP GUI 710. In my other computer I have SAPGUI 640, I can see the attributes of the node and I can map it. I'm using same Interface/form and connecting to the same backend except different machines and different clients.
Pls help me.
Thanks,
Santha Kumari

Hi Santha,
Did you fix your problem ? I'm having the same problem as yours. Could you please share your solution if you already fixed it.
I'd truly appreciate your help.
Thanks in advance.

File data view issue in Mainframe system

Hi,
I am generating an outbound Interface file to Mainframe system.
Details about file - It contains header of 15 bytes, data records of 1930 bytes and trailer record of 11 bytes. I am putting a carriage return at the end of each record( we are doing like this for all interfaces and mainframe system guys could able to see lines)
The issue is when the file is opened by mainframe people the data is coming in 132 columns not in 80 columns. The data has to come in 80 columns so that they could able to print it( for further processing).
Options tried:
1. Sent both carriage return and lines feed for each record.
2. Sent only line feed in each record.
3. Tried OPEN DATSET statement in LEGACY MODE.
4. OPEN DATASET with TYPE 'lrecl=80, blksize=8000, recfm=FB'
5. Tried all combinations of carriage return and line feed.
Any help/suggestions on this?
Thanks for your time.
Regards,
Karthick.

Check this to see if you are not missing anything : Files - 11g Release 1 (11.1.1)
Regards,
Santy.

Can not view data in Dimension Data Viewer

Hello Forum,
Has anyone run into this one yet? with OWB10gr2
we have created a dimension called store, it has a simple hiearchy"
store-->category-->primary category-->Busines Unit
The dimension validates and deploys sucessfully - we have seen the notes to choose Deploy All for configuration instead of the default, reason being that if you don't choose Deploy All you will not be able to view it through the data viewer
We have mapped the data from our oracle staging table to the dimension and our map has run without error.
We can see data in the underlying table that supports the dimension, but when we open the dimension with object editor and try to view the loaded data via the dimension data view we get nothing?
What's up with that?
thx again
monalisa

You're probably running into the same known bug we hit. See the OWB 10gR2 release notes, under "Known Issues / OLAP Catalog". Probably hitting the mentioned OLAP bug 4945008.
Hope this helps,
Scott

TZ of Day/Week/Month View is US/Pacific - Info Box & System TZ US/Eastern

Just noticed this - don't think its been happening for long - probably a couple of days at the worst.
When I create a New Event, the Time Zone is automatically incorrectly set to US/Pacific. I change it to Eastern (via Info Box) and it displays in the Info Box as Eastern, but the Daily/Weekly/Monthly view seems to remain at US/Pacific. (System prefs set to Eastern TZ).
In addition ALL my events display in Day/Week/Month view as US/Pacific TZ, even tho Info Box TZ (and system TZ) is US/Eastern.
For Example: Info box says event starts at 5PM goes to 9PM, Time Zone is US/Eastern. Calendar Display in Day, Week or Month shows event from 2PM to 6PM.
This has affected every one of my events.
I am running OSX 10.4.9,build 8P135 iCal Version 2.0.5 (1069)
iCal Support for Time Zones turned On.
Date/Time System Preferences appear to be OK
System Time (measured by Menu Clock and verified by save time on a file) is OK - (Am writing this at about 2:40PM EST, Sunday 6/3/2007.
Here's my Software Update.log
2007-05-15 23:43:37 -0400: Installed "Java 1.3.1 and 1.4.2 Release 2" (2.0)
2007-05-15 23:44:19 -0400: Installed "iTunes Phone Driver" (1.0)
2007-05-15 23:44:42 -0400: Installed "X11 Update 2006" (1.1.3)
2007-05-15 23:45:15 -0400: Installed "QuickTime" (7.1.6)
2007-05-15 23:46:24 -0400: Installed "Security Update 2007-004 (PowerPC)" (1.1)
2007-05-16 00:51:49 -0400: Installed "J2SE 5.0 Release 4" (4.0)
2007-05-16 01:21:55 -0400: Installed "Java for Mac OS X 10.4, Release 5" (5.0)
2007-05-31 01:21:19 -0400: Installed "Security Update (QuickTime 7.1.6)" (1.0)
2007-05-31 01:23:41 -0400: Installed "Security Update 2007-005 (PowerPC)" (1.1)
2007-05-31 01:24:42 -0400: Installed "iTunes" (7.2)
Looked in various logs but didn't see anything that seemed suspicious to me.
Help or suggestions about where to look to uncover solution to this mess appreciated.
Mini - 1.42 Mac OS X (10.4.9) 1Gig (self installed)

It was US/Pacific -
I just changed it to US/Eastern and everything seems to work correctly now. I never even noticed that setting before - I guess I may have reset it by accident?
I see you're from Bristol, UK. A friend told me a few hours ago that he has to make a business trip there sometime this summer and was thinking about bringing his family (from Boston, USA). We were not too clear on English geography tho - is Bristol a decent family vacation destination?
Mini - 1.42 Mac OS X (10.4.9) 1Gig (self installed)

Bind multiple fields to one node in data view

I have a need to have an interactive form where data from a single data source is displayed in multiple fields on the form. In addition these fields are open for input. I have bound the multiple fields on the form to one node in the data view. The data is being displayed in the multiple fields. This form is being routed thru workflow so various agents are updating the form. The problem that I am having is that the form only seems to allow input in the first field on the form but not the other fields that are tied to the same data source. For example, field A and field B are bound to node SUMMARY. I can add/change/delete data in field A but not in field B. After I have done some entry in field A, I can then sometimes make changes in field B. We have a requirement that field A be enabled for agent #1 but field B is invisible. Later in the workflow, agent #2 needs to make final changes on a "summary" page so agent #2 had field B enabled.
Does anyone have any idea how to correct this data entry issue so that data can be entered into either field that is tied to a single node?

Having multiple fields in the backend is not an option. I will not go into the business reason in detail but the last page of the form contains a final version of data pulled from various locations on the form where the data on the other pages was input by multiple agents in the process flow. The last agent in the workflow needs to put the "finishing touches" to the data and should not have to search all over in the form to find the appropriate data fields.
I have found 2 possible solutions and would like to know if anyone can recommend one over the other.
First solution - bind multiple fields on the form to one node in the data view. This seems to work correctly on the form and data can be entered into either field, with the data being passed back to the webdynpro context in the one node in the data view (corresponding node in WD context).
Second solution - the node/attribue in the WD context must have the same name as a DDIC element. The node in the data view must have this same name. The field names on the form must also have the same name. Define the binding for the field names as Global. I have not validated that the data is passed back to the WD.

Customizing Sharepoint Calendar Week Group View to display multiple weeks in a single row

Hi,
SharePoint Calendar's Week Group View is useful for comparing multiple co-worker's schedule, and we have a business needs to be able to view the schedule for with the date range of more than one week at a time between co-workers for planning purposes, is
there a way (code or no-code) to manipulate the date/week range so that the calendar display more than 7 days in a single row?

Hi,
As there is no such OOTB feature, I would suggest that you can change the calendar scope to “Month” or create a Gantt view to display more weeks in a view.
Or you can try to create a custom calendar web part to meet your requirement.
Here are some samples of custom calendar web part for your reference:
http://www.codeproject.com/Articles/108676/SharePoint-Custom-Calendar
http://gunnarpeipman.com/2009/01/creating-sharepoint-global-calendar/
https://blog.metrostarsystems.com/2013/10/21/creating-a-custom-sharepoint-calendar-rollup/
Best regards
Patrick Liang
TechNet Community Support

Merging Basic data View and Classification View in Material Master

Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar Baddela

Hi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT

Logical Standby Data Consistency issues

Hi all,
We have been running a logical standby instance for about three weeks now. Both our primary and logical are 11g (11.1.0.7) databases running on Sun Solaris.
We have off-loaded our Discoverer reporting to the logical standby.
About three days ago, we started getting the following error message (initially for three tables, but from this morning on a whole lot more)
ORA-26787: The row with key (<coulmn>) = (<value>) does not exist in table <schema>.<table>
This error implies that we have data consistency issues between our primary and logical standby databases, but we find that hard to believe
because the "data guard" status is set to "standby", implying that schemas' being replicated by data guard are not available for user modification.
any assistance in this regard would be greatly appreciated.
thanks
Mel

It is a bug : Bug 10302680 . Apply the corresponding Patch 10302680 to your standby db.

SharePoint 2010 SQL Data View will not sort text columns

Hello All,
This is a comment not a question.
I was hitting my head against the wall for a couple hours with this one. Data View worked fine until I tried to sort it by one of the test columns in the data. After much research I figured that it had to be a data type issue. Sure enough
I found that the database table was still using the text data type. This has been deprecated but still works in SQL. Not in SharePoint! I hope this will help someone.
Thanks,
Michelle Metzger

did you check this post,
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/5f8003a0-f845-4fb6-8b43-a0a234bcb1ea/the-execute-permission-was-denied-on-the-object-multiple-alerts?forum=sharepointadminprevious
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Has anyone found a solution for iPhone 5 data leak issues?

Up until about a week ago I was using a 3GS and the data leak issues seemed to be fixed with the newest iOS 6 update. However, I recently got an iPhone 5 and I've noticed it uses around 1 MB per hour no matter what I'm actually doing on the phone. I actually went to sleep last night, turning of cellular data AND wifi and it STILL used about 4 MB of data!! What is up with this?? I am a pretty conservative user of data when not on wifi, but I'm only 2 days in to my bill cycle and already on pace to go over my 2 GB limit by the end of the month. Please help! I do not want to switch my plan and play more! I am on AT&T by the way.

Have you tried these basic troubleshooting steps?
Restart / Reset
http://support.apple.com/en-us/HT201559
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252
If no joy, make an appointment with the Apple genius bar for an evaluation.

SNP: How to "lock" initial column in SNP data view (SCM7.0 / SP8)

Hello experts,
after a change from SCM5.0 to SCM7.0 we are seeing a change in a tiny but very important capability and we are trying to re-establish it in SCM7.0. If somebody has an idea how to address this that would be of great help:
As of SCM5.0 users were able to lock the INITIAL column of an SNP DataView so that the column is the default start column and not the next future column. In SCM5.0 the solution had 2 elements
A) set a user parameter in SU01 called /SAPAPO/SDP_STARTCOL to value X
+
B) double-click the header of the initial column in the SNP data view
As of SCM7.0 this is not supported anymore. There is a certain user setting in an SNP data view (Settings --> Others --> "Period from last selection" ) but this is not behaving to our needs and SAP is saying what we want from SCM5.0 is a non-supported feature in SCM7.0.
So, does anybody have an idea how to solve this. I checked UserExits and BAdis in SPRO for interactive planning - there all kind of stuff but nothing having a method to allow / perform a "column locking" in an SNP Data view. Thanks for any tip or hint here.
Regards
Thomas

Hello jejeje,
thanks for your efforts - what you describe is something users have found out on our side too - a problem remains: you can save this setting "Period from last Selection" and it brings you to the INITIAL column but: once you have scrolled forward in the SNP data view (so that the INITIAL column has disappeared) and you leave the SNP data view or select another product ... it "remembers" that you last time left the data view NOT having INITIAL column as a start column.
So, my users say that they scroll back to INITIAL column before selecting another part or using another SelectionID or leaving the SNP data view ... and of course they hate this since they have to do this a few hundred times a day worse case.
We had a call open to SAP on this and I told them that is about productivity and usabaliity issue moving from SCM5.0 to SCM7.0 - but they have nothing more to say than "not supported anymore" - and the ultimate solution is / will be to modifiy SAP SCM standard coding - unless somebody from SAP is reading the discussioons here and is dedicated to help their customers which pay millions every year into SAP support fees.
Thanks for your responses and effort !
Regards
Thomas

Data View WebPart Expand on Group Header fails

Using SharePoint Designer 2013, I've inserted a data view webpart and have grouped the rows by a number of
columns (default for grouping is show expanded).
When the webpart renders I can collapse each of the groups by clicking on the "minus" image, but they won't expand again (interesting that the image changes to a arrowhead pointing southeast rather than a "plus").....on
inspection the function ExpGroupBy is referenced which I believe is in the Core.JS file. I've confirmed that core.js is referenced on the page.
The same expand function works in 2010 but not in 2013.
I've updated my SPD to latest version and recreated webpart...
Any ideas about resolution or debug strategy?

Any update on this? Facing a similar issue. I am able to display the merged data from two lists, but when I attempt to group them by a common field they both have, I get an error.

Week-Data view issue

Similar Messages

Maybe you are looking for