Weight group: must all sequences in the determination???

Hi,
In customizing I can see:
1) up to 1 kg = group 0001
2) up to 10 kg = group 0010
3) up to 20 kg = group 0020
4) up to 1000 kg = group 0100
When customizing I only need group 0020 and 0100. So I fill only group
0020 and group 0100.
But if I fill in the determination sequence 0020 and 0100 it goes wrong when the
total weight is for example 7 kilo. The system 'sees'that 0010 is not filled and won't propose the route from group 0020. But that is up to 20 kg. Why not?
Do I have to maintain all my kilo groups in customizing? Not only the one I need?
Please help me out. Point awarded!!
Regards,
Eric van Zundert.
Message was edited by:
Eric Van Zundert

Hi,
Instead of maintaining as:
1) up to 1 kg = group 0001
2) up to 10 kg = group 0010
3) up to 20 kg = group 0020
4) up to 1000 kg = group 0100
Try out with
1) up to 1 kg = group 0001
2) from 1.00... kg to 10 kg = group 0010
3) from 10.00... to 20 kg = group 0020
4) 20.00... up to 1000 kg = group 0100
and then to the route determination on basis if weight group. I hope this should solve your problem. Please let me know if I've not interpreted your query correctly.
Regards
SD

Similar Messages

How to apply Property Loader to all sequences in the Sequence File?

HI,
I'm following the help instructions for the Property Loader and it states....
Use Current Sequence File—Selects the file where the step is located.
Sequence—Specifies the name of the sequence into which to import variables and properties. The specified sequence must exist in the specified sequence file. Select the <ALL SEQUENCES> tag from the drop-down list to instruct TestStand to import variables and properties for all of the sequences in the specified sequence file. You must specify a valid sequence name for the step to work properly.
In my specific sequence file I added the Callbacks: SequenceFileLoad, SequenceFileUnload, PreUUT. In addition to that, my MainSequence is calling 2 subsequences.
I put the propertyLoader step (setting few values of the SequenceFileGlobals) in the setup section of the SequenceFileLoad, checked the 'Use Current Sequence File' and selected ALL SEQUENCES tag in the 'Sequence' option. I verified that it does what I wanted. Then, is it entered the PreUUT subsequnce, the values returned to the "original" values.
Is that a bug?
If not, how do I use the PropertyLoader in a sequenceFile that include several subsequences as well as Callback sequences.
Thanks
Rafi

Ooops, sorry about that...
I forgot to mention....it is TS 3.5.
As per your questions-- yes they all in the same sequence file.
     mySeqFile.seq
           SequenceFileLoad
           SdequnceFileUnload
           PreUUT
           Seq1
           Seq2
AS I said....I put the property loader in the setup of the SequenceFileLoad, I see that it works properly in that subsequence. Then, after the SuequenceFileLoad is finished, I do Ctl+F5 for Test UUT's. I put a breakpoint in the first step of the preUUT subsequence and check the context. I notice that the variables in the FileGlobals to whom the property loader writes, have been changed back to the original values.
I'll try to create a simple program to duplicate it but it may take me time as this test station is very busy.
Thanks
Rafi

CUCM 9.0 Hunt-Group Phone( all phones in the hunt group) reset

Hi,
we have 7945 , 03 phones with attendanat consoles connected , all three phones get reset at the same time ,
this happens once each 4-5 days time, these three phones are conencted to LAN using two different switches ,
so it cannot be a problem with the switches , or conenctivity , ( other phones do not reset at that time , only these three phones which are in the same hunt group reset )
please advice us

Hi,
There is no option to check on your phone on who picked up the call in the pickup group. Please check the following link for the behavior of 89XX and 99XX IP phones
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/10_0/english/userguide/P567_BK_UB293500_00_userguide-8961-9951-9971-10_0/P567_BK_UB293500_00_userguide-8961-9951-9971-10_0_chapter_0100.html
"Hunt group and multiparty calls show an icon to the right of the caller ID that differentiates the call from a normal call."
HTH
Manish

[DATA LOSS] I closed the Tab Groups and all my tabs dissapeared. How can I recover the tabs in Firefox 26? Would you please just delete this feature?

Thank-you in advance for reading all of this.
A slip of the mouse in trying to return to the left-most tab caused the tab groups feature to take over the window. I completely failed to comprehend what I was looking at and closed the thing by clicking the x because I damn sure didn't want what I was looking at. Undo close group? Of course not, I didn't want a group in the first place. Hey! My tabs are completely gone now! So in just a few steps all of which seemed innocent, I have lost all but ten of the tabs that were open, and those were only the most recent ten (and actually older tabs would have been more valueable than newer so insult on top of injury).
I don't think increasing the number of undoable tab closures is the answer. I think getting rid of the tab groups feature all together is the best way to go. I seem to have lost all the tabs I had open, irretrievably, and some of them had been open for WEEKS so they can't be reopened from history.
The tab groups feature is a data loss bug. Please remove it from the UX completely. If you have to figure out a way to grandfather people who actually have a tab group, fine but don't further vex me with it, please.
The reason this catastrophe has occurred is that your feature, was so discoverable that I activated it by mistake, and the UI after that had to be learned on the spot, yet was too complicated to learn. You really should withdraw it until you can figure out how to keep the UI for it from causing data loss such as I have experienced this morning.
Also, there may be other questions on this feature which are from a certain point of view the same as this one. It's hard for me to tell for sure. None of them had a true resolution so that's why I posted this one, also I'm seeking a specific fix, removal of the offending feature.
Why remove the feature? Because if I allow in my discussion the possibility of retaining it, it will stick around in its present and dangerous form until your team is done bikeshedding the new form it should take. Instead I want you to delete the feature and then require its champion to convince you that a new incarnation won't cause data loss before you allow it back in.
Fellow users, if you know of a way to recover all 50 lost tabs from an "undo close tab group incident", I would be grateful for that advice, but I would still believe the feature should be deleted. Some of the tabs have been retained for months so digging them out of the history is not practical.

I am not 100% certain but I am fairly sure development of this tab feature has ceased and it is likely to be deprecated. I am even less sure what the replacement will be.
Thus forum is not the place for discussing development issues or feature requests. (Developers do not use this site)
*You could comment using feedback <br /> https://input.mozilla.org/en-US/feedback
*Or try to find a developers forum or mailing list <br /> http://www.mozilla.org/about/forums/#general-development
I have not tried this and am not even using Windows at present but the tabs groups are stored as entries in the sessionstore.js files. Firefox has such a file plus sometimes numbered copies and a backup copy. Firefox will have re-writen these files but I suppose there is a posibility the Windows OS may have kept copies.
* see http://windows.microsoft.com/en-US/windows7/Previous-versions-of-files-frequently-asked-questions
* http://kb.mozillazine.org/Sessionstore.js Note the files are kept within the Firefox Profile
** Firefox Button -> Help -> Troubleshooting [open profile] (or some thing similar) is one method of locating the profile.
Find and backup any current sessionstore.js file. Consider also bookmark or otherwise recording anything you have open. Now find any previous versions and try putting them in Firefox's profile before restarting it.

WSUS - Parent server will not purge computers from the unassigned group after being moved on the downstream servers.

I need some help please. I have read every forum I can think of and google for months and can not find a solution.
I have 1 Primary WSUS Server and 3 Replica servers. Often times systems are placed into the unassigned group on the replica servers and then after a syncronization they will show up on the primary server in the unassigned group.
The problem is that when I log into a replica server and move these computers to another group, they never get moved on the primary server. They will constantly remain on the primary server in the unassigned group. I know this is probably something simple that I have overlooked in the documentation, but believe me I have tried everything that I can come up with. Please help! :)

> So when you move them into the appropriate group... this is not remembered on the server.
It is... but only until the *client* (which believe that it is authoritative for its group memberships -- as a result of the policy configuation) tells the server otherwise. Then the server has the group membership as reported by the client machine.
> I thought that when the client went to contact the server again and said I'm in this group (which happens to not exist on the server)
If the *group* does not exist on the server, the client will be seen only in "All Computers". The group name reported by the client is still stored in the database as an attribute of the client, but because the console is not configured to display that group, the client computer does not appear in any group except "All Computers".
> the server would then say, yes you are; however the admin has told me that you really belong to this other group.
No, the server never assumes it is authoritative for anything coming from the client. The WUAgent is the authoritative source for everything in the WSUS environment (except Update Approvals <g>). If the WUAgent is not configured to use "policy-based groups", then the WUAgent will query the WSUS Server to determine which group(s) the client belongs to, and if the server is configured in Options | Computers to "Use the console... to assign groups", then it will answer with the currently stored group name(s). However, if the WUAgent is given that information via policy, then it doesn't ask for anything, it *tells* the server what the facts are, and those facts are used to update the WSUS database.
> On the downstream server they remain in the appropriate groups after I move them.
> Its only on the upstream server that I have this problem.
There are several configuration parameters that could be contributing to this. We should start by verifying the correct settings for all of them.
1. Options | Computers on the replica server is set to "Use group policy".
2. Options | Computers on the upstream server is set to "Use group policy".
3. The policy configured group exists on the upstream server.
4. The policy configured group has replicated to the replica server.
5. The policy has been properly applied to the client system.
6. The client appears in the correct group(s) on the replica server, according to the group(s) configured in the policy.
7. The replica server has synchronized successfully with the upstream server since the client system last *reported* to the replica.
8. The upstream server has "Reporting Rollup" enabled.
9. Sufficient time has passed to allow the upstream server to complete the asynchronous updating of the reporting data from the replica server.
If all of the above is correct, and the client system still appears in "Unassigned Computers" on the upstream server, then we'll have something that needs further investigation. Most likely, though, is that one of those items enumerated is not copasetic and is interfering with the correct recording of the client system's correct group membership. Once corrected, the upstream server will properly reflect the actual group memberhips as configured in policy.
Lawrence Garvin, M.S., MCITP:EA, MCDBA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time.

Mail Group shows all members when preferences is checked

Hello
MacBook air Yosemite 10.10.2 Mail 8.2
In preferences when I UNcheck the box "When sending to a group, show all member address"
the compose window display the group correctly but when I send it shows all the member address in my send folder as well as the recipient ???
thanks for your help

Try using the BCC field as a workaround.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Mail Feedback

TS1468 If all tracks on an album are written by one artist, but have other supporting artists, can I group them all as one album under the original artist without having to group them as a compilation and being called "Various Artists"?

I'm pretty sure I've tried all the suggestions I've found, but I can't seem to find a satisfactory option.
I'll use a CD I just bought as an example. I just bought "The Best of Sergio Mendes", all songs are written by Sergio Mendes, but some include Brasil '66. iTunes thinks this album is a compilation, but I really just want to group it all as Sergio Mendes rather than Various Artists, but I still want to have the information about which songs include Brasil '66. For some reason the tab "Sorting" does absolutely nothing, but it seems like the idea behind it would be really useful if it actually worked... Is there a way of doing this or will I have to settle with a more confusing or less informative option? I feel like this must be possible, or else it's a pretty big flaw for me as I have a fair few albums this would apply to.
Thanks in advance for any help.

Indeed, generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
Don't try to use sort fields to merge different things together as it quickly goes wrong. These should be used consistently to make all things with one value sort as if they had a different one, e.g. Bowie, David to make David Bowie sort under B.
tt2

IN Premiere Pro CC how can I group copy all files in time line to another part of the time line

How can I group copy all files from one part of the timeline to another part

From the Premiere Pro manual (I believe track targeting matters, too. That is, the targeted tracks only are copied):
Copy command enhanced to operate on a range in a sequence
The existing Copy command (Edit > Copy, Ctrl+C (Windows), Command+C (Mac OS)) is enhanced when used in the Timeline panel. If there are no clips or keyframes selected, and an In Point or Out Point is set, then the range of time between the In point and Out point is copied to the clipboard.

PAB Distribution List outlook 2003 xp migrated to win7 Outlook 2010 looses all addresses in the Group

Have a user that has PAB Distribution List outlook 2003 xp and migrated to win7 Outlook 2010 looses all addresses in the Group/Distro List group imports, just will not show addresses in the distro or it removes them.
I opened the same PAB and distro on a xp computer with office 2003 after user complained none of the contacts in the distro where in there.. and using the same PAB on both computers the group contacts where populated... but do not appear on outlook 2010
win7.
The Distro/Group is a personally created distro by the user, not an exchange server stored distro/group so its not a exchange issue.
Ive searched the net .. cant find anything on the issue.. don't know if its a MS bug, or something is switched on or off, Registry issue ??
Need a real answer to this , and can not use a third party app, must be resolved with existing apps, very strict enviroment
Thanks in Advance
Sean

Hi everyone,
I have the exact same problem. When I import a 2003 PAB into Outlook 2010, There are no contacts displayed. The address book itself seems to be imported (I can select the address book when creating an e-mail), but again, no contact exist in the imported
PAB.
Best regards,
Michael

What will happen if a maitain both standard available capacity and grouping key ( shift definition and shift sequence) in the capacity header of a work center?

Hi all,
Im little confused with the capacity header in work center. In the capacity header there is one place to give start time, end time, length of break and number of individual capacity. And in grouping key i can define the shift and shift sequence. So if im maintaining both of these ( standard avilable capacity and grouping key), which will be considered to calaculate avilable capacity?

Hi
If you are running three shifts ,please maintain the data as given belwo
start :00:00:00
End:23:59:59
Break :03:00:00 ( 1 Hour per shift so 3 hrs for 3 shifts)
No.of individual capacity :1
System will understand that it is round the clock operation with total three hour brak and you will get 21 hour per capacity
Hope this helps
regards
Prakash

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? Thanks

Try
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

How do I make Step Types in the Type palette be "master" versions which all sequence files on a particular should use? (since this only seems to "half work")

The situation I would like is to have a library of step types which sequence developers can use. Therefore if new step types need to be added, or existing ones modified - all that needs to be done is to roll out a new MyTypes.ini (for example), and the code modules/substeps.
Scenarios:
If I create types in MyTypes.ini (make sure "Attach to this file" is checked, so they get saved here). I can then create a sequence file using these step types. No problem so far.
I can open the type palette, modify the step properties, and save. When I go back to my sequence file an asterisk appears (saying it needs to be saved, even if I have opened it from scratch). The properties have been updated to reflect what is in the Type Palette. Still no problem (Type versions are the same in the sequence file and type palette).
This is where the problem appears:
If I change a step type (in the Type Palette) from using a code module to using a Post-Step substep instead (changing the module adaptor to "None") - any instances do NOT update when you open sequence files. (The same happens vice versa also).
Please note that the "Type version" listed in the sequence file DOES match that listed in the Type Palette - the properties are the same but the manner in which the code modules are called is DIFFERENT! This then can lead to to runtime errors if the old code module has been deleted for example.
The only way around this is to open EVERY sequence file that contains an instance of the step type, and make sure that you have "Apply changes to all loaded instances of this type" checked in the step type properties dialog. This is is not a good solution since files could be missed, and is very time consuming if you have hundreds of sequence files!
What I need is that the Type Palette on any particular station contains the MASTER copies of each type. These are loaded whenever a sequence file is loaded and NOT retreived from the sequence file. As discussed above this seems to work when you modify properties - but doesnt work fine if you change the way in which code modules are called.
Am I doing something wrong or is this a limitation?

I had a system recently containing seven sequence files, approx 20 subsequences in each, and around 10-20 steps in each sub-sequence. Every step (except for the NI non-code module types) was an instance of a step type.
Each one of these steps had an Edit sub-step and a code module called through the code module adapter.
In order to make these into "wrapped up" step types it was decided to move the code module to a Post-Step substep (as also done in the NI-IVI step types) - so that developers cannot fiddle with the code prototype or module.
In order to do this I had to open all 7 of the sequence files, make the changes and then ensure that "Apply changes in this dialog to a loaded instances" was checked. This seems to sort of work, but some steps started causing Error 17502 (System Error) when you configure them (call the Edit substep). Over the course of the past few months I have had to effectively check every instance of a type to see if it works (deleting the step and replacing it when it doesnt). Other strange things happened like some of the step type instances now have the "None" (adapter) icon associated with them - but both still work.
The idea of creating a type-def of a step type is a good one, but frustrating that it doesnt seem to fully work. Why should the sequence file also store a version of the step-type - which is what is effectively causing this problem - why not make it so that if you dont have the step types installed in the type palette - TOUGH! Message Edited by RichM on 03-15-2005 06:55 AM

How do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

how do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
This would be an SMS group similar to an email listserv but running on the SMS network
I have seen private individuals offering this service
It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
Steve

I think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.

Weight group: must all sequences in the determination???

Similar Messages

Maybe you are looking for