Weights are not coming into order correctly

Hi gurus,
When entering a standard order for a material XYZ with ref to a Qty contract the weights change if there is more than one line entered. On the first line 500 pcs has a weight of .530 and on the second line 500 pcs has a weight of .930...
For ur info...In Mat.master Base unit is EA and Net&Gross wt is .001LB
And the qty contract created for qty 14000EA .
I don't understand the logic behind this..Appreciate if u can throw some light on this issue...
Reg
JJ

Hi JJ
In MMR if base unit of measure is EA and Net & gross wt is .001LB then system must be rounding before 0.50 or more than 0.50 in decimals. Also check the base unit of measure data wheather any rounding has been maintained or not. Also check in the pricing procedure wheather any Rounding condition type has been maintained or not to round the decimals near to the less or more 0.50 points
Regards
Srinath

Similar Messages

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna

AED and SED values are not flowing into Order

Dear Gurus,
We are using ECC 6 and TAXINJ. We did all the CIN configurations to the best of my knowledge. JMOD is flowing normally. But AED & SED are not. UTXJ is coming as also JIN6 (VAT), E Cess and S&HECess. We dont have Cess in the client's company, so Cess is not to be considered.
If a check list can be given, maybe I can check my customization with it, since I am an SD consultant and alot of things are involving MM too. Unfortunately we dont have any MM guy with us for the time being.
Any answers are most welcome.
Thanks and regards.
Venkat - Hyd.

Hi,
Go to SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Maintain Excise Defaults
Here check whether AED and SED condition types are assigned under columns A/R AED Cond and A/R SED Cond respectively. If not then assign and check.
Also check in FV12 for the Tax Code used whether condition record has been maintained as 100 % for AED and SED conditions. If yes then check in J1ID, for "Excise Tax Rate", maintain rates for AED and SED.

Why audio books are not coming into itunes

generally I download 2 books a month from audible.com, after download from audible site, they pop into itunes and i transfer them to an ipod. Even though audible show them as downloaded and my mac download window shows them as downloaded, they are not in itunes nor if i use search can i find them on my computer, Anyone have a suggestion for obtaining the books in the usual manner. thanks joanlvh

These are user-to-user forums, you are not talking to Apple here.
Audiobooks (and ringtones) are currently a one-time only download. I believe that they are all supplied to Apple by audible.com, so I assume that it's them who are requiring the one-time only download restriction. To get it onto your other devices you will need to sync it via a computer. Depending upon what country that you are in, Audible.com have their own app (Audiobooks from Audible) so you might be able to buy direct from them, though I don't know whether you can buy within their app or download audiobooks directly from them within the app e.g. whether they need to be copied via a computer.

Messages are not coming into my inbox...

Can anyone help??
My mail activity says I have messages that are being received but they do not seem make it into my inbox. I can access the emails as they are redirected via my pop account, but its a pain.
Does anyone know why messages would suddenly stop arriving?
I am a complete beginner, but I set it up 2 years ago and its been fine till now.
Cheers guys.

Hi SOLVED IT !!
In Mail, i clicked on the gear wheel icon - bottom left of Mail window, clicked on Get Account Info - then on Messages on Server - there were titles of all messages I'd seen on mail2web.com but not downloaded to my Inbox in Mail.
Noticed that there was a message with no title and Sender Unknown, it was 25MB !!! Deleted it, and all fine now !!! Hope this works for you. Not sure if Mail didnt like one mega message or if the Inbox was at capacity - do have 1800 messages in there - its my memory box !! good luck Chris

TS1627 I can receive my mail on my iPod and iPhone, but the messages are not coming into my macbook pro.

When I set up my two email accounts on my new mac, I was receiving mail just fine, and I could check it on any of my 3 devices, and view read or unread between the devices. Now no mail is getting through to my laptop. Any ideas??

Hello annasus77,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Have a nice day,
Mario

Amount is not coming into the Invoice for Warranty Order

Salute All !!
Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
Please provide solution.
Rgds
Srivastav
+91-9973504950

Hi,
Because you are not billing to customer the net amount is zero-
You can do like bill the component as regular item and give credit note against it.
or else create seperate billing output type assign this to proforma invoice- print the cost of item by pulling it in new smart form.
(this is not very good idea because , customer knows the actual cost of the item)
Thanks
Chidambaram

Weights are not getting copied from quote to order

Hi All,
While creating sales order items with reference to a Quote the weights are not getting copied (zero shown in weights) even though the material in quote has weight.
Why are the weights not getting properly from quote to order .

hi
goto VTAA and select the target document
click on Magnifying glass symbol
here check whether you have selected complete Reference or not
But if you select this then the system copies the source document completely.
Procedure
If you mark the field, the system copies the source document into the target document completely. The system also copies the complete reference indicator. You cannot change the indicator in the target document.
Regards

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Sales order are not coming in FS10N ?

Issue: How is it possible to see number of sales order in the detail of item in the transaction FS10N?
When i see the Transaction FS10N for 2011 , at item level Sale Documents are Present , but when i Use the Same FS10N for 2012 , Sale Document values are not present ?
Kindly tell me the possiblities why the Sale Document Values are not Coming ? Its Urgent .
Best Regards
Amit Arora

Did you install any major upgrades or other system changes recently? I am not saying that that could cause this, but I really cannot think of anything that would suddenly stop populating Sales Document and Sales Document Item when you enter a new fiscal year. Also, are you sure you are looking at the line items that originated in the SD module?

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

I downloaded iOS 7 and now in my music library all my songs are not in the order of the original albums. How do I get them back into order?

I downloaded iOS 7 and now in my music library all my songs are not in the order of the original albums. How do I get them back into order?

go to settings>general>reset>reset home screen layout and see if they appear.

My new messages still not coming into my mail inbox, my Mac OS X version 10.6.8

Can you please give me the correct detail for Mail Preference/account information both incoming mail server & outgoing mail server.
My new messages still not coming into my mail inbox yet, still not working since yesterday. My sent mails are ok working. What,s number for Port & click on 'use SSL'? 110?
My safari is working Internet.. My ipad2 is still working to receive my new messages via my mail inbox. Something miss in my mail preference? How to fix it?
Regards lisa

Here's my reply to another discussion on the general procedures for setting up a Mail account.
But without the specifications defined by your ISP no one can tell you any more specific details. They should have a web page somewhere (or call them) that supplies all the relevant information:
Incoming (pop) mail server
mail login user name and password
pop port
ssl requirements
authentication type (password?)
Outgoing (smtp) mail server
smtp port
ssl requirements
authentication type (password?)
mail login user name and password

Value are not coming (tcode cm50)

hi expert ,
in below code values are not comes into ITAB_TXTLINES ( WA_DATA ) . we use a standard program cm50 tcode . into
customize program memory but values is not coming into wa.
values(arbpl ,werks,kapar,planr)
this is my first time i use standard progarm
so plz help
REPORT ZPP_CM50 LINE-SIZE 170..
TYPE-POOLS : SLIS.
DATA : INT_CAT TYPE SLIS_FIELDCAT_ALV,
       INT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : LS_LINE TYPE SLIS_LISTHEADER,
       VN_TOP TYPE SLIS_T_LISTHEADER,
       IT_SORT TYPE SLIS_T_SORTINFO_ALV,
       WA_SORT LIKE LINE OF IT_SORT.
DATA : LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: BEGIN OF SLIST_LISTLINE,
      LINE(1024)      TYPE   C,
      END OF SLIST_LISTLINE.
DATA: ITAB_TXTLINES LIKE SLIST_LISTLINE OCCURS 0 WITH HEADER LINE.
TABLES : CRHD , KAKO .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
      AA(20),LEVEL(20),ITEM(20),OBJ(20),OBJID(20),
      OBJDES(20),OVRFLW(20),QTY(20),UOM(20),ICT(20),
      END OF ITAB_DATA.
DATA : WA_DATA LIKE ITAB_DATA.
DATA: TEXT TYPE C LENGTH 10,
      RSPAR_TAB TYPE TABLE OF RSPARAMS,
      RSPAR_LINE LIKE LINE OF RSPAR_TAB,
      RANGE_TAB LIKE RANGE OF TEXT,
      RANGE_LINE LIKE LINE OF RANGE_TAB.
*DATA: TEXT TYPE C LENGTH 10,
     RSPAR_TAB TYPE TABLE OF RSPARAMS,
     RSPAR_LINE LIKE LINE OF RSPAR_TAB.
     RANGE_TAB LIKE RANGE OF TEXT,
     RANGE_LINE LIKE LINE OF RANGE_TAB.
DATA : LIST_TAB TYPE TABLE OF ABAPLIST.
SELECTION-SCREEN : BEGIN OF BLOCK ABC WITH FRAME TITLE TLT.
SELECTION-SCREEN   SKIP 1.
*SELECT-OPTIONS     ARBPL FOR CRHD-ARBPL.
SELECT-OPTIONS     WERKS FOR CRHD-WERKS.
SELECT-OPTIONS     KAPAR FOR KAKO-KAPAR.
SELECT-OPTIONS     PLANR FOR KAKO-PLANR.
SELECTION-SCREEN   SKIP 2.
SELECTION-SCREEN : END OF BLOCK ABC.
START-OF-SELECTION.
*RSPAR_LINE-SELNAME = 'TRUST_ID'.
RSPAR_LINE-KIND    = 'P'.
RSPAR_LINE-LOW     = 'RPF1'."'VD06011013'.
APPEND RSPAR_LINE TO RSPAR_TAB.
CLEAR RSPAR_LINE.
RSPAR_LINE-SELNAME = 'YEAR'.
RSPAR_LINE-KIND    = 'P'.
RSPAR_LINE-LOW     = '2009'.
APPEND RSPAR_LINE TO RSPAR_TAB.
CLEAR RSPAR_LINE.
RSPAR_LINE-SELNAME = 'REPONAME'.
RSPAR_LINE-KIND    = 'P'.
RSPAR_LINE-LOW     = 'FORM3A'.
APPEND RSPAR_LINE TO RSPAR_TAB.
CLEAR RSPAR_LINE.
SUBMIT RCCRY000 EXPORTING LIST TO MEMORY
USING SELECTION-SCREEN '1000'
                WITH CRHARBPL-LOW EQ ARBPL
                 WITH CRHWERKS-LOW EQ WERKS
                 WITH KAKKAPAR-LOW EQ KAPAR
                 WITH KAKPLANR-LOW EQ PLANR
                  AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      LISTOBJECT = LIST_TAB
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS     = 2.
CALL FUNCTION 'LIST_TO_ASCI'
    EXPORTING
      LIST_INDEX         = -1
      WITH_LINE_BREAK    = ' '
    TABLES
      LISTASCI           = ITAB_TXTLINES
      LISTOBJECT         = LIST_TAB
    EXCEPTIONS
      EMPTY_LIST         = 1
      LIST_INDEX_INVALID = 2
      OTHERS             = 3.
LOOP AT ITAB_TXTLINES .                                   "from 5.
    CLEAR WA_DATA.
    SPLIT ITAB_TXTLINES AT '|' INTO: WA_DATA-AA
                                     WA_DATA-LEVEL
                                     WA_DATA-ITEM
                                     WA_DATA-OBJ
                                     WA_DATA-OBJID
                                     WA_DATA-OBJDES
                                     WA_DATA-OVRFLW
                                     WA_DATA-QTY
                                     WA_DATA-UOM
                                     WA_DATA-ICT.
   IF ITAB_TXTLINE-SY-INDEX .
then
     DO 4 TIMES.
       REPLACE '.' IN WA_DATA-LEVEL WITH SPACE.
     ENDDO.
*DELETE ITAB_DATA-INDEX=1." WHERE WA_DATA = ITAB_DATA.
     CONDENSE WA_DATA-LEVEL.
     IF NOT WA_DATA-LEVEL IS INITIAL and not WA_DATA-LEVEL cp 'Emp*'.
        APPEND WA_DATA TO ITAB_DATA.
     ENDIF.
   ENDIF.
ENDLOOP.
thanks.

Hi,
CM50 is generated from CM10 main program for parameter 'M'. It generates it on the runtime and exports values into memory. It's less likely you will be able to generate the whole set into a Z Program.
I didn't find a function module to do so. But, with your consultants help you can create your own function module that gives results similar to CM50, it's merely calculation of capacity of workcenters for a period using the sales order booked against the work centers in that period. If you try a bit you can create it.
Good luck.
Also remember, before you post a code, use ...

Sales contracts could not coming into the KE24

Hi,
Only sales contracts(VA43) not coming ito the KE24
But whenever we created the sales order with reference to the sales contracts then that time its appearing into the ke24
why only sales contracts(do not having the Sales orders) not coming into the KE24
Is it requires any config for this

Hi
Contaract is not standard charactor in co-pa thats y only contract it won be appear in the ke 24 report . if you are using contract with reference to sales order when you are doing the billing system it will take both sale order and coanaract fields it will update in co-pa .
If you want to take contaract in to co-pa without sales order u have to create charactor strics dervation rule in KEDR transaction then it will update in copa .

Weights are not coming into order correctly

Similar Messages

Maybe you are looking for