Weird behavior from logic... help !

1) since a week, just out of the blue, I could not reconised my templates.
All the buses labeled and auxes are disapered or at the wrong place.
It's all messed up, suddenly.
I feel that I have to trash my préférences or reinstal logic but I dont want to lose all my chanel preset and set-up...
How can I fix this ?
2) Second problem is that all the stereo chanels that was on a previous project are now with out the mono or stereo circle. They are none of it and there's no sound coming out of those weird chanels. I have to recal another chanel that has the mono/stereo option to make it work.
To many workarounds to be in a proffetionnal context.
How to fix that ?
thanks

Did you uncheck "Universal Track Mode" in Preferences/Audio?
pancenter-

Similar Messages

Editing a series for Fox - weird behavior from our system since Premiere CC 2014.2 Update

Hi all,
I'm cutting a series for Fox and we're on season 3. I cut all of season 1 on FCP7. Then dipped my toe into Premiere waters between seasons and cut all of season 2 in Premiere with excellent results. My only gripe on the previous Premiere CC versions was towards the ends of cuts when my timelines were rather complicated, I'd have a crash or two each day. Well I'm finishing up an episode this week which is the first I've cut in version 2014.2. It's WAY more stable, I haven't had a single crash in weeks. That part is amazing! The huge downside has been that my real time performance seems to have taken a serious hit even though the hardware, disk storage, video card, tower etc. are all identical. Worse is that when I'm playing back a sequence that's longer than one show act (like a sequence with the entire show in it, only 22 minutes) I'll a lot of time get a slight stutter frame between edits and that happens on a lot of edits. It's a fast paced racing competition show so say I'm playing back my timeline with a cut from a go pro on the steering wheel to a shot outside the car, it looks like there's a freeze frame of 2 frames long at the end of the GoPro shot before going to the shot outside the car. It's not only going from GoPro to non GoPro, it seems to happen on any kind of footage UNLESS I render it all, then it's fine. It's very frustrating. I've also confirmed when opening up an old show that played back fine on the previous version that this is still happening on these old projects as well. Also when color correcting in a sequence, there's generally a delay in seeing my color changes of several seconds! Premiere has always been instantaneous or very close to instantaneous when showing color updates for the past year until this update. Is this a known issue? Here's my specs:
Premiere CC 2014.2
Mac Pro 2009 2.93 Octo
32GB Ram (in my memory settings of Premiere, I have it set to optimize rendering for Performance and 26 GB RAM for Premiere, 6GB for other apps)
GeForce GTX 780 6GB version
My media is attached via a GRAID 4TB drive connected via eSata. I've also tried a different Graid attached via USB3 and another hard drive connected via FW800.
OSX 10.9.5

Hi, I had the same problem.
What I found is the audio external interface needed to be reset.
So I've did this : quit Premiere, unplug my USB audio device, plug it back and launch premiere.
Every was fine.
Hope it work for you.

Odd Menu behavior from 7940

I'm developing an XML service to allow users to set wake-up calls, and I'm seeing some weird behavior from my 7940. The phone gets up to the second screen in the application, a PhoneMenu, and then when I try to select one of the two MenuItems, it gets the appropriate URL from the webserver, but still displays the old page, and then if I try to select a MenuItem again, it doesn't go back to the webserver.
I've attached the XML for the two screens; the first one is ampm.xml and the second one is message.xml.

If you obtained it from Cisco Developer Support, isn't it for version 3.3.4? Are you sure you have the 4.0 version?
Nothing significant has changed between versions (that I am aware of). The newer version includes tags to support the model 7970 IP Phone/Communicator, and the old version had minimum values for some tags which have been removed for the most part in the new schema.

HELP! Sudden weird behavior in Aperture and MobileMe!

So, I am running the latest version of Aperture and have been successfully publishing many albums to mobileme.
I have several external hard drives connected to my computer, and almost all of my image files in aperture are referenced. Lately I have been importing the images from SD cards directly into the aperture library, editing, then relocating the masters so that i would only store the keepers (i went this route because it was unclear to me whether or not originals were also deleted if i deleted referenced files--the pop up wording seems vague to me). I usually back up the new image files on the harddrives manually, and then back up the aperture library to a vault after every major import. I also wait until I have done this to reformat my sd cards.
Of course, this morning, something happened. We had a power outage, and although i have my entire system on UPS units, i had to shut everything down because the batteries only last so long. I did not have time to perform my usual Vault back up. I had a handful of projects with masters in the aperture library (not yet edited and masters relocated). There is one project I do not still have on sd card so that one (and inconvenience for the others) hangs in the balance.
The situation is this: When I rebooted after our power outage (i reiterate that all hard drives as well as the main mac were shut down safely and properly on battery power), all referenced file projects appear normal, but I cannot see any images in the projects with masters stored in the aperture library. The weird part is that if i put the pointer over those projects, i do get the little balloon that tells me how many versions are in each project. It's like aperture knows they are there, but I don't see them. And another weird thing--the REJECTED images from these projects DO appear when I click on the Rejected Smart Album. And the starred images from those projects DO appear when I click on the one-star-or-better smart album. I don't get it.
I also cannot see some of the mobileme galleries within aperture when i select them. When i went on-line to see my gallery, there is some weird behavior...some albums are acting strange, confusing images from other albums, or not accepting my username and password settings (I know they are right), or giving me a different album when I select one to look at.
PLEASE HELP if you can. If I need to, I can always restart from my vault version of the library and reimport last week's stuff from the sd cards, but i'd rather not do that, not to mention there is that one project i will lose.
I'm here waiting for anyone who thinks they can help!
Thanks,
Heather
Message was edited by: heatherperryphoto
Message was edited by: heatherperryphoto

Hi Heather
I was wondering if I was the only one with this problem. Unfortunately I don't have an answer. I'm running Aperture 2 on a MacBook, with my library on an external drive. The problem is increasing; it seems that most (but not all) recent projects are affected, but none that I created before the problem first started.

URGENT Please help with weird behavior of test suite

Hi All,
I have a composite involving three operations of two different services. The weird behavior comes by the time on which I run the test suite on the EM, if I try to emulate two different operation response from one service, by the time that the flow, tries to emulate the second one, I always receive this error:
part name="summary">
<summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary>
</part>
On the other hand if I emulate two responses of the same operation it works.
Does any one have any idea of how to deal with this kind of test? Which seems a very simple test.
Best regards,

Hi thanks for your response, in detail my problem is as follows:
1- I have a simple composite with two services and three invokes, all of the operations are two ways operations. Here´s the BPEL (Service1 Demandas, operation Actualizar; Service 2 Aviso, operations buscar, actualizar):
<scope name="SINAUT_Aviso_SRV_Demandas_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_1">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/idDemada"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload" query="/payload/demanda/idDemanda"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoDemanda/codigo"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload"
query="/payload/demanda/estadoDemanda/codigo"/>
</copy>
</assign>
<invoke name="Invoke_2"
inputVariable="Invoke_2_actualizar_InputVariable"
outputVariable="Invoke_2_actualizar_OutputVariable"
partnerLink="SRV_Demandas"
portType="ns2:SINAUT_Aviso_SRV_Demandas"
operation="actualizar"/>
</sequence>
</scope>
<scope name="SINAUT_Aviso_SRV_Avisos_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_2">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/ReferenciaPly"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoAviso/codigo"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/estadoAviso/codigo"/>
</copy>
</assign>
<invoke name="Invoke_1"
inputVariable="Invoke_1_buscar_InputVariable_1"
outputVariable="Invoke_1_buscar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="buscar"/>
<assign name="Assign_4">
<copy>
<from expression="'12345'"/>
<to variable="Invoke_3_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
</assign>
<invoke name="Invoke_3"
inputVariable="Invoke_3_actualizar_InputVariable"
outputVariable="Invoke_3_actualizar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="actualizar"/>
</sequence>
</scope>
2- My test suite is as follows:
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Demandas" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<content>
<payload xmlns=""/>
</content>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="buscar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_busqueda.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_actualizar.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
3- When the test suite executes the second operation of the second service it throws this exception:
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary></part><part name="detail"><detail>Can only write attribute within a tag.</detail></part></remoteFault></bpelFault>
4- if I change the second operation with the first one(buscar), it doesn't throws any exception.
5- If this is a limitation , how can I test a composite that involves n operations of the same service?
Kind regards and thanks for all of your support

Logic Pro Upgrade from Logic Express 8 + Lion. Please help

I have bought a new mac with lion operating system after my previous mac was damaged beyond repair, however i am running a logic pro 9 upgrade from logic express 8. I have been told that logic 8 doesnt work on lion, but i need to install it before i can install my upgrade to logic 9. Can someone help??

I believe you just need the serial and not necassirly the installation of 8 on your system.

Trying to import XML score from Logic, cannot put XML into timeline. Help!

So, I composed a score for my shortfilm in logic, and have exported it in XML format. I can import it into FCP just fine, but when I try to put it in the timeline, I get an error message saying "Operation not allowed. You cannot nest sequences with different editing timebases."
I did a search before posting this, but couldn't find someone with a similar problem. How can I get this to work? Thanks in advance!

Obviously you edited your sequence in fcp in à different framerate than the sequence imported from logic.
In the browser you can see in the frame rate column that both differ. Right?
Does it work to open the logic sequence in fcp. In there select all. Command c to copy.
Go to your final sequence and do command V?
Otherwise is it possible to open the logic sequnce in fcp and change the framerate in sequnce settings.
Otherwise is it possible to set a framerate in your logic project to the same rate as your fcp sequence and then re- export the XML ? (sorry, don't know the app)
Rienk

Weird behavior in master-detail

Dear Forum,
I need to implement an application but I still have a halting error.
I have this strange problem and I'll try to explain.
I have this masterscreen with search functionality. When I do a search, I get a result. When I now enter the details screen of the second row of the search result and I change the fields on the details screen and do a commit, I get the message that the changes were made successfully, but I see the primary key jump to the value of the primary key from the details of the first row of the search results on the masterscreen.
And when I look at the details of the first row, the changes were made in this details, and NOT in the details in which I needed to make the changes.
And now more weird... I can only reproduce the problem in Internet Explorer and whatever I try, it works correct in Firefox.
So the functionality should work as supposed, as it wouldn't work in Firefox.
Has anyone encountered this problem before or does anyone has a solution or tip to get to the solution?
Your help is much appreciated.
Arjen

Steven,
When I tried to create the logs you requested, I ran up to a different problem, also affecting this behavior. When I repaired this, still the weird behavior took place in Internet Explorer. And in Firefox the problem was solved. So I tried to disable the cache in Internet Explorer. This solved the problem there as well..
So this behavior doesn't happen anymore with the cache disabled, thus solved this problem.
Thanks for the effort anyway.
Arjen

Weird behavior in Classic or not?

It has been a long time since I've needed to use Classic (on 10.4.something) Today I needed to do something that could only be done in classic. I thought I saw some weird behavior so I tried a couple of other classic apps.    All started Classic just fine, brought up their document window and menu bar. But there was no classic desktop under the app's window and while the menu bar showed "finder" as an open application that could be switched to (the right-most menu item) but when I switched to it I got the OS X finder, not a OS 9 one.   Occasionally I can get what looks like a Finder menu bar, but that's on it are the Apple and Help and the app switcher.
Recently I've been playing with Sheepshaver on a Snow Leopard system, which brings up an honest-to-goodness OS 9 desktop.
Now, I am misremembering how Classic works (in effect, no desktop and no finder) or is something wrong. I checked all three of my systems running Tiger and they have the same behavior.   (A G4 -- that will still boot into OS 9, a powerbook G4, and a mac-mini.)
Ted Lee
Minnetonka, MN

OK, I found an article on rebuilding the desktop and it indicated that while there is a file for the OS9 desktop, in the classic environment it is invisible and can only be found through an alias that is created on the OS X desktop. I suspect I've deleted that alias since I didn't have any particular need for it.   The article tells you how to re-create the alias from the terminal. indeed there is a folder there and it is empty. No particular use for it -- if you select Desktop from an OS 9 app you get the OS X desktop.   I can also see why there's no real OS 9 finder -- anything you could have done from it you can do from the OS X finder -- except the "Apple Menu" and that's why that's under the classic icon on the right half of an OS X menu bar. There still is a "rebuild desktop" in the Classic prefs -- I assume that's so you get the right doc/app association in the classic environment, since I don't think OS X understands the classic creator/type info.
So sounds very much like I'm misremembering!
Ted Lee
Minnetonka, MN

Weird Behavior After FTP

Okay guys, please bare with me here. I've tried to search for an answer online and on the forums but couldn't find one. I uploaded our website through muse FTP into our public folder.
It seems our website will point to the right place if it is without www. preceding the address. With www. it tells us that the site is under construction as the default page from our host. I've tried deleting the "default home" page they upload but no luck.
www.mcg-consulting.ca and http://mcg-consulting.ca
Anyone have any idea what I can do to make both addresses work? We have a development team but they're all pretty swamped with work and since I'm an Avid Adobe fan, I figured I'd give this a shot with Muse since I'm a CC subscriber. Also, it's a little embarrassing since I was bragging to them how awesome muse can be for designers like me. So I'd really like to get passed them and get this up and running.
The site isn't done but management want whatever I have built to be put up since I'm about 80% done, so any help would be highly appreciated.

Hey guys! Sorry about this. For some reason it's working now, even though I haven't changed a thing. Weird behavior fixed itself. Apologies for this once again.

Weird behavior in opening Aperture images in Photoshop

I have found a lot of really weird behavior when opening Aperture images in an external editor (in my case, Photoshop, so I'll use PS to refer to it):
1) If the master image is opened in PS, a new version is created when the file is opened, not saved. So quitting PS without saving leaves you with a new version of the file, regardless of whether you actually saved any changes or not.
2) If a version (not the master) is opened in PS, a new version is not created, either on open, or on save. So in other words, changes to that version in PS when saved overwrite that version, and the previous condition of that version is lost (with respect to versioning).
3) If multiple versions of the same image are opened simultaneously in PS, there doesn't seem to be a way to tell the difference between them in PS, except for visually (possibly meta-data, but I haven't checked that, nor would I want to be forced to). The file names of all versions are exactly the same.
I'm looking for feedback from anyone out there who can explain why this isn't completely quacky version control. I've been using version control almost my entire career (as a software programmer) and here's how I have seen almost invariably version control work:
1) New versions of files are always created upon commit, i.e. saving of the file, not on opening a file. (Do not confuse this with working copies, think about what is present in the repository).
2) Opening / editing any file version is never destructive. Any change to that file version that is saved (committed) results in a new version, not an overwrite to the same version.
Aperture's interface basically has combined what traditional version management has represented separately, that being the client and repository views of a project. They are showing all versions of a file simultaneously. This is fine, but I'm really not liking the fact that some changes create new versions, other changes overwrite versions, and one case, merely opening the file creates a new version, whether there are any changes saved or not. In addition, when working with multiple versions in the editor, the file name and/or interface doesn't give any indication of what version you are working with. Easy to say that's the fault of the external editor, but I disagree -- all external editors are going to work with filenames, so Aperture should produce a unique namespace for any file version so that any external tool will be able to distinguish (visually) one file from another.
Is this completely wacky version management, or is it just me?
Brad
Powerbook G4-1.33GHz-17" / Powermac G4-1.4GHz Mac OS X (10.4.2) PB: 1GB RAM, Radeon 9600-64MB / PM: 1.25GB RAM, Radeon 9000Pro-128MB

Hi Bradley,
Due to the way I personally use Photoshop, I want Aperture to behave as it does.
That's because, with Photoshop, I use layers extensively. Any edits I do (levels, curves, saturation, sharpening) I do on layers. I can delete the layers at any time (or select to show or hide them). Because of this, I actually WANT Aperture to behave the way it does. Once I've done a bunch of edits in Photoshop, if I select again to edit that file in the external editor, I want to work on that specific file (to add another layer, or change one). I don't want another duplicate. I tinkered with this over the weekend, and it worked very nicely for me.
Perhaps you work differently from within Photoshop? Do you ever use layers? If I were to have a bunch of Photoshop "versions," each with 5 layers, I'd have like 5 GB of "versions" for my original 8 MB RAW file, due to the size of PSD files. Yuck

Weird behavior in UCCX 7.0.1 SR05

Hi team,
I've got a weird behavior in a UCCX 7.01 SR05 installation.
All incomming calls which go to an agent who is set "ready" set the agent to state "not ready" and go to queue...
This behavior also occurs with standard script icd.aef.
Had anybody has same behavior in an UCCX 7 installation? Or can anybody help me? I checked my configuration twise and couldn't find
any issue.
Thanks a lot,
Tobias

I've seen this happen before because of a CUCM configuration issue. Check whether the CUCM Calling Search Space for the UCCX CTI ports can call the partition of the agent's extension. My guess is that the call attempts to connect but CUCM will not allow it to go through. UCCX then marks the agent as "Not Ready" and drops the call back in queue.

Creating support desk messge from ECC "Help"

Hi Experts,
I am working in SP20 EHP1 of Sol Man.
Kindly provide the configurations & authorizations to be done in ECC system & in Sol Man system to create the support message from ECC "Help" menu.
I have created the ZLFN transaction type (copy of SLFN). When i create the support message in ECC help menu, i need to create the support desk message with "ZLFN" transaction type.
Your valuable inputs required.
Regards
Senthil

Hi Naveen,
Thanks for the SAP note. Can you explain point no:5?
1. The client was not completely created by the copy of Client 001
    I need to check this with basis team
2. The BCOS_CUST table was not maintained correctly
    In BCOS_CUST (In satellite System), i have maintained the following:
    OSS_MSG W SM_DM3CLNT110_BACK CUST620 1.0
3. Missing authorizations for message creation (correct: roles copied from SAP_SV_FDB_NOTIF_BC_CREATE and SAP_SOL_SERVTRANS_CREATE or SAP_SUPPDESK_CREATE)
I am having SAP_ALL authorization in Satellite system. Is these roles to be assigned in Sol Man also?
4. incorrect action profile assigned for the message type SLF1 (correct: SMSD_ABA_MLDG_SERVICEVORGANG or SLFN0001_STANDARD_DNO)
For SLF1, i have assigned the action profile :SLFN0001_STANDARD_DNO. But inside this action profile, i have changed the values like PROCESS_TYPE to "ZLFN" & PARTNER_FCT_CREATOR to "ZLFN0002".
5. Number ranges are not assigned correctly
Can you explain this? For SLF1 & ZLFN , i have maintained "Internal" number ranges.
6. The logical system is not defined
Logical system for Sol Man & Satellite system is created.
7. Modification of the standard settings of the message type SLF1.
I have changed the Text for Priority in SLF1.

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo

My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo. It's a macbook pro early 2011. I've read that those are having issues, if there's someone i can contact for further information, report the issue since it's getting common or any temporal solution available. Thanks

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Weird behavior from logic... help !

Similar Messages

Maybe you are looking for