Weird behavior using the Info Overlay

Here is a screen shot of the strange behavior I get when hitting the "I" or info key in LR. This is happening in LR3 & LR4. When I first hit "I" I get a correct display of shutter speed, aperture, etc - then after a few seconds the strange display occurs and I hit the "I" to bring down the info overlay. Any help appreciated (Win7, 1 yr old Falcon NW, with 12 GB memory).

Yea, that is what mine does, I toggle the "I" and it fixs itself. Then it will display the metadatta correctly, but intermittently it will then flip back to that wanged out looking display. Not worth purchasing a new video card (if in fact that is the culprit) for but it is quite frustrating.

Similar Messages

My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo

My macbook had a weird behavior on the display, now it won't go further than gray loading screen with the apple logo. It's a macbook pro early 2011. I've read that those are having issues, if there's someone i can contact for further information, report the issue since it's getting common or any temporal solution available. Thanks

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

HT4191 I was sincronizing my iPad by using the INFO Section by: Other Sync notes with Outlook Advanced Notes. The result was a huge problem, because it erased the notes in my iPad and added other notes of my commpuerte into my iPad. What can I do to?

I was sincronizing my iPad by using the INFO Section in iTunes when my iPad was connected by: Info>> Other >> Sync notes with Outlook >> Advanced >> Notes.
What I wanted to do, is pass the notes in my iPad to my computer (Outlook) in order to have a backup of that information. Nevertheless, what the sincronization did was eliminate all the notes that I had in my iPad and incorporate new notes from my computer.
Is there any way to restore my old notes? Is there a "trash" in iTunes were I can find that set of notes?
I do not think I have a backup of my iPad, therefore I cannot use that option. Does any one have any solution for my problem??? I would really appreciate some help.

Not as yet, and the proper answer is for Microsfot to update O2011 for iCloud, they have a statement noting that iCloud is not supported (Mail is) but no timetable for a fix.

Weird behavior on the colors

Hi,
my sql script is to show order performance using the image. When I ran it from sqlplus, it return <img src="#WORKSPACE_IMAGES#yellow.gif" > from the result. But when I ran it from apex, it displays color red "red.gif". what's wrong?
Here is my script:
select region,
productline,
fy_quota,
round(ytd_orders,0),
ytd_d_quota,
decode(order_perf, 1, '<img src="#WORKSPACE_IMAGES#green.gif" >',
2, '<img src="#WORKSPACE_IMAGES#yellow.gif" >',
3, '<img src="#WORKSPACE_IMAGES#red.gif" >') "order_perf"
from (select region,
productline,
sum(fy_quota) fy_quota,
sum(ytd_orders) ytd_orders,
(sum(ytd_orders)/decode(sum(fy_quota), 0 , null, sum(fy_quota)))*100 ytd_d_quota,
(case when (sum(ytd_orders) >= (decode(sum(fy_quota), '0', null, sum(fy_quota)))
*(round(months_between(sysdate, '01-January-08'))/12))
then '1'
when (sum(ytd_orders) < (decode(sum(fy_quota), '0', null, sum(fy_quota)))
*(round(months_between(sysdate, '01-January-08'))/12))
and (sum(ytd_orders) >= (decode(sum(fy_quota), '0', null, sum(fy_quota)))
*(round(months_between(sysdate, '01-January-08'))/12)*0.85)
then '2'
when (sum(ytd_orders) < (decode(sum(fy_quota), '0', null, sum(fy_quota)))
*(round(months_between(sysdate, '01-January-08'))/12)*0.85)
then '3'
end) order_perf
from order_perf_detail
where lower(fy) LIKE lower(:P1_FISCAL_YEAR || '%')
group by region,
productline
Thanks.
Helen

Opps,
After I post the message, the color image '<--img src="#WORKSPACE_IMAGES#green.gif"-- >'is gone. Here again:
select region,
productline,
fy_quota,
round(ytd_orders,0),
ytd_d_quota,
decode(order_perf, 1, 'img src="#WORKSPACE_IMAGES#green.gif" ',
2, 'img src="#WORKSPACE_IMAGES#yellow.gif" ',
3, 'img src="#WORKSPACE_IMAGES#red.gif" ') "order_perf"
from (select region,
productline,
sum(fy_quota) fy_quota,
sum(ytd_orders) ytd_orders,
(sum(ytd_orders)/decode(sum(fy_quota), 0 , null, sum(fy_quota)))*100 ytd_d_quota,
(case when (sum(ytd_orders) >= (decode(sum(fy_quota), '0', null, sum(fy_quota)))
*(round(months_between(sysdate, '01-January-08'))/12))
then '1'
when (sum(ytd_orders) < (decode(sum(fy_quota), '0', null, sum(fy_quota)))
*(round(months_between(sysdate, '01-January-08'))/12))
and (sum(ytd_orders) >= (decode(sum(fy_quota), '0', null, sum(fy_quota)))
*(round(months_between(sysdate, '01-January-08'))/12)*0.85)
then '2'
when (sum(ytd_orders) < (decode(sum(fy_quota), '0', null, sum(fy_quota)))
*(round(months_between(sysdate, '01-January-08'))/12)*0.85)
then '3'
end) order_perf
from order_perf_detail
where lower(fy) LIKE lower(:P1_FISCAL_YEAR || '%')
group by region,
productline
)

Date of film roll is weird when using the camera connector

I use my 60GB iPod Video also as backup disk for photos when shooting abroad. Everything works fine except one thing: althoug the date/time of camera, iPod and Mac Mini is set properly, the imported film roll shows in iPhoto always the same date/time: 2001-01-01, 00:00. The date/time of the photos is - weird enough - ok.
I can correct that manually but it seems to be a bug. Is there a workaround to fix that?

Okay I just solved the problem myself..
For anyone that may have the same issue:
The microphone used when recording video, is the little dot next to the jack on top of the iPhone 4S (maybe also iPhone 4, don't know). There was some dirt in this tiny little hole, and I simply just removed it with a very thin needle, and now it works great!

Weird behavior using "Open schema type..."

I'd like to check if I'm doing something wrong or it's a bug.
Steps to reproduce:
1- Create a ODSI project;
2- Create a folder and name it "schemas";
3- Create a "test.xsd" schema into "schemas" using this code:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
          xmlns="http://schemata.petrobras.biz/corp/core-types/1.0"
          elementFormDefault="qualified"
          xmlns:xml="http://www.w3.org/XML/1998/namespace"
          attributeFormDefault="unqualified">
<xs:import namespace="http://www.w3.org/XML/1998/namespace"/>
<xs:complexType name="TextLineType">
<xs:simpleContent>
<xs:extension base="xs:normalizedString">
<xs:attribute ref="xml:id"/>
<xs:attribute ref="xml:lang"/>
<xs:attribute ref="xml:space"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
</xs:schema>
4- Save your project;
5- Right click "schemas" folder and select "Open Schema Type...";
6- There's no matching types!
7- If you remove all three attributes from extension tag you will have the matching type.
Am I doing something wrong with those attributes?

You can declare it and use it. The only problem seems to be with "right-click -> Open Schema Types..."
<xs:complexType name="TextLineType">
<xs:simpleContent>
<xs:extension base="xs:normalizedString">
<xs:attribute ref="xml:lang"/>
<xs:attribute ref="xml:space"/>
<xs:attribute ref="xml:id"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>
<xs:element name="TextLine" type="TextLineType"/>
declare function tns:test() as element(ns:TextLine){
<ns:TextLine xml:lang?="" xml:space?="preserve" xml:id='something'>
</ns:TextLine>
};

Info Overlay on 2nd Monitor Disappeared

I use LR3 with a dual monitor set up. Mysteriously, the info overlay on my 2nd monitor has disappeared. I have tried cycling the info display, among other things, but can't get the overlay back. The info overlay displays obediently on my primary monitor. How do I get the info overlay to reappear on my 2nd monitor?

Ian,
Normally, it does toggle the info overly. But now it does nothing to control the overlay on my second screen.

Can I use the Podcast app like the older iOS 6 Music Player?

I've updated to iOS 7 and iTunes 11.1 and found that things seem drastically different.
How i used to do podcasts:
Subscribe to a podcast in iTunes on my Mac
Sync to iPhone using a cable
What used to happen:
Podcasts that were selected to sync did if there were unplayed episodes
The Music player would list only those podcasts where there were unplayed episodes
Now things have changed. I immediately was told that none of my podcasts were playable without the Podcast app. I downloaded it and installed it.
What is happening now:
Still subscribing to a podcast in iTunes on my Mac
Sync to iPhone using a cable
Podcasts showing unplayed in iTunes on my Mac = 46
Podcasts showing unplayed in the Podcast app = 57 - the difference appears to be that the podcast app is showing non-downloaded podcasts
Podcast app showing all podcasts whether or not there are any to play. The list includes podcasts that are not supposed to sync to my phone.
The Podcast listing appears to be in a random order (actual list shown)-
Apple Keynotes (no episodes)
This week in Photo (8 episodes)
Jake and Amir (no episodes)
Podcast Beyond (no episodes)
Accidental Tech Podcast (no episodes)
Vector (1 episode)
Podcasts with no new episodes now show a new episode though it looks like the episode is not downloaded
I'm not sure why what is being shown in iTunes is not being shown in the Podcast app.
Is there anyway to get the old behavior using the Podcast app?

Additional information. Can this be right?
I spoke to Apple support who said that the settings for podcast syncing in iTunes are no longer being used since Apple moved to their Podcast app.
This may explain why I see all 45 podcasts on my iphone when I only have 15 of them set to sync.
She also said that I would need to manually sync listened/unlistened podcasts between my Mac and my mobile devices since podcasts were no longer being synced from iTunes.
Can anyone verify?

How to install and use the Gnome-DO application in oracle enterprise Linux

My Oracle Enterprise linux is 5.3,
I want to install and use the Gnome-Do(http://do.davebsd.com) in my box.
Please help me regarding this.
With Regards
DSK

According to Google, Gnome-Do has known issues about CPU bugs and hogs and the latest incarnation does not seem to be available for RHEL and clones. You should have more luck with Linux Desktop distributions like Fedora and Ubuntu. Or you could try to build from source using the info at: http://do.davebsd.com/wiki/Installing_Do. Good luck - I wouldn't bother.

I edit the location in the info pane, but it doesn't show up in Places!

Hi everyone, I have recently started to use iPhoto '09 but having a little difficult with Places. I do not have geotagging, so I am editing the location of my photos manually (nothing too specific, just the city). When I first attempted it, I used the info pane for the event, added the city (saw a pin drop in the appropriate location on the mini-map in the info pane) and then clicked done. However when I went to the Places window...no pins were on the world map!
I closed the computer and decided to try again the next day. Although I cannot imagine I did anything different, this time it worked! Yeah!
But today I added new photos and again edited the locations in the info pane (clicked the little 'i' in the right bottom corner), but while the info pane shows the correct location both in words (Location) and on the mini-map...when I go to the Places window, the pins are no where to be found (only see the pins from the previous day).
Am I missing something simple here? It's driving me nuts! hahaha...

I'm going from memory since this is done from work, but I believe you have to use semi-complete addresses (IE., 'Chicago' by itself won't work, you need to use 'Chicago, Il.' or 'Chicago, Illinois'. IF the address is for a 'Place' iPhoto knows (and it knows hundreds if not thousands of places) it will pop up and allow you to choose that location. If nothing happens, that probably means iPhoto doesn't know that 'Place' and you need to provide a more complete or more accurate name for it. Like I say, try getting in the habit of using at least a City and State... you can also choose the 'Locate on Map' feature and it will actually show a map of the place and you can Move the Pin to exactly where you want it, choose from Satellite View, Terrain View, Map view, zoom in, out, or enlarge or reduce the area covered by the Pin (the Blue Circle around the pin. Hope this helps...

SRM and the Info record

Hi,
If I use a Classic Scenario the info record is a source of supply. So, we need to delete it when we implement the SRM.
How do I do with the costs calcutation?
The variants use the info record as a base to do the calculation.
Thanks for the help
Evelyn

Hi Evelyn
As i understand, you want to use the info record for the costs calculation SAP ERP.
But you don´t want the info records to appear as source of supply in SAP SRM.
To solve this i suggest to implement the BBP_DOC_CHANGE_BADI in SRM and delete the info record information from the positions:
Importing Structure is "it_item" field "BE_INFO_REC".
Alternativ you can implement the Sourcing Badi´s: BBP_SOS_BADI
Best regards,
David

Properly updating Flash CS5.5 to use the lastest Flash Player/Debugger

Hey all,
I'm just about to uninstall and reinstall at this point but I'm getting my install all screwed up trying to update Flash Pro CS5.5 to use Flash Player 11. I had it fine using the MXP provided in this adobe blog. Though that's 11.0 not 11.1. It did work however.
I downloaded the latest Flash Player / Debugger .exe and the latest SWC for 11.1 and now Stage3D is no longer being seen. Clearly I screwed something up. I uninstalled and reinstalled the MXP after deleting the FP11 XML and FP11 directory but it's not working anymore.
Is there a clear cut simple way to explain how to overlay the latest Flash Player for FPCS5.5?
I used the AIR overlay instructions for 2.6 - 3.1 and it worked every time. Now I just need Flash Player overlay instructions.
I'm very interested to start trying to Starling framework with Stage3D. I select FP11 to export and it tells me it can't find Stage3D. D'oh!
Thanks for tips!

Just an update. Upon printing flash.system.Capabilities.version I can see for CTRL+ENTER it's using version WIN 10,2,153,2. When I do a debug test it's using version WIN 11,1,102,55. That clearly explains why Stage3D is only available in debug testing.
I did overlay release and debug .exes in the Flash CS5.5 Player folder. Does anyone know of another place I might need to overwrite the flash player or which .exe CTRL+ENTER actually launches?

How can I get the info off the top of screen during slideshow playback on 7d

Subject says it all. I have a 7d and want to play slideshow through the camera up on screens without the info across the top. No the info buttin does not help. My older rebel does this no problem. YES I can shoot on 7d but playback through rebel but thats dumb. Help please.

I have had the same problem. I solved it by disconnecting the the cable and then using the info button to clear the info from the rear screen. When I re-conneccted, the TV screen was clear during slideshow.
There might be an easier way, but I haven't found it.
Mike Sowsun
S110, SL1, 5D Mk III

My trash bin has one item that refuses to be deleted. Under name, it says, 0. date; dec. 31, 1903. size; 0 kb. I have no idea where it came from. When I click, info. the info. window starts to appear, then goes away. Weird or what? Hope someone can help?

my trash bin has one item that refuses to be deleted. Under name, it says, 0. date; dec. 31, 1903. size; 0 kb. I have no idea where it came from. When I click, info. the info. window starts to appear, then goes away. Weird or what? Hope someone can help?

sorry i forgot that... i use php5 so i guessed at the module name... upon looking closer at the conf its mod_php4.c
<pre>
<IfModule mod_php4.c>
AddType application/x-httpd-php .php
</IfModule>
</pre>

How do I turn off the photo info. overlay when viewing images in L/R 3?

Sometimes I take a screenshot from within L/R 3.6 and send it by email. Problem is the image name/date/size info. overlay spoils the image. I've looked all over L/R prefs etc but I can't see how to turn the info. off, assuming it's possible to do so?
Also..I have another problem which I can't find help for.
I used to be able to import pics from my camera into a specific folder on my hard drive. That was until 2 weeks ago. Now my only choice is to import into the folders below. C. drive - where all my digi camera pics are - is no longer there. How do I get L/R import to recognise my hard drive again

With regards to your other problem, you have too many icons on your Desktop (seriously, this is a known bug). Either clean up the desktop and your drives will reappear, or start typing the full path to your folder in the Folder box at the bottom of that browser box and that should work also.
You could also try the full-screen Import window as well, the Destination Panel in the right-hand column may work differently....

Weird behavior using the Info Overlay

Similar Messages

Maybe you are looking for