Weird centering prob

Ok, so I've looked though the knowledge base and the sticky threads here a bit, but this is just such an odd issue I didn't know exactly where to turn.
The problem is that on my SBLi've (original with li'vedri've) I get this odd problem when playing back music. That is, every time I restart a song, the center seems to toggle from correctly centered to left focused.
So I play a song and it sounds alight, but if I restart it, it's all in the left speaker.
I've tried a couple different players: Winamp, foobar, WMP and it seems to depend on what output I'm using. The standard WaveOut that WMP uses sounds like **bleep**, and for some reason is balenced way to the *right*... so I just nixed that, I also get this same behavior when I turn off Hardware accelleration on DirectSound.
So when I use DirectSound, with hardware acelleration turned on, every other time it initalizes the buffer, the center shifts...
So yeah... What the hell..

Bump

Similar Messages

  • Muvo TX FM weird connection prob

    Hy everybody! Im from Germany, but bought my MUVO 256 TX FM over the internet about a year ago, and it worked quite well all this time, untill last week!
    The weird thing is that the player works just fine, I can listen to the music already stored inside, but when I connect it to any computer (I tried about 5 different now), there is no response at all!! It is not even recognized as 'new hardware' or 'other hardware' in the device manager!!
    However, the player shows the tipical "connected" screen when I plug it in!
    Someone Help me!! XD
    And Thanks for at least trying

    It should be in the manual... but basically you connect the player to the PC and it should appear as a dri've letter in Windows Explorer. You then copy supported audio files e.g. WMA, MP3, to the player as the dri've letter. Once copied you disconnect the player and the songs should be there and available to play.

  • Weird Registration Prob

    Hey everyone... I'm having a weird registration problem. So I just got a Creative Zen Vision 60GB and I installed it comepletely and after about a week I started getting a pop-up screen on my desktop that says "Gentle Reminder: Register your Creative products now to enjoy a host of benefits." So of course I registered it but that pop up continues to be on my desktop ALL the time and I have tried everything I can think of to get rid of it. If I X out if it, it takes me to another pop-up "If you are registering portable products, please ensure that they are connected and switched on before clicking on the OK button" If I click OK it goes on with the registration process. I have uninstalled all Creative components on my computer but the pop-up remained every time I turned on the computer. I re-installed everything. Same problem. Can anyone help me? This is driving me nuts!

    Have you tried selecting the option where you don't want to register, and select for it to not remind you Or does it still pop up then If you tried that and it didn't work, you can manually stop it from starting up in Start-> Run-> then type MSCONFIG. Under StartUp you'll see a list of programs that load automatically when Windows starts, if you untick it there it won't start up again.
    Cat

  • Weird microphone probs with Z10

    Hi there,
    as already said as part of another post:
    I´m having (also) trouble with my Z10 built in microphone.
    Audiorecording works fine and crispy clear, so I can assume the mic is just working, but when it comes to phone functionalities, this is where the weird behaviour starts!
    Initiating or answering phones directly in "handset" mode is no problem, but the mic is muted some how!
    Whe I switch to hands-free-speaker, my voice is directly loud and crystal clear again. When putting it back to handset mode, turning the speaker off, the mic immediately becomes muted again.
    Connecting a bluetooth headset (bose BT 002) or the factory issued speakerphones "re-connects" the mic directly again, loud, crisp and crystal clear.
    unplugging/unpairing these devices results in "strike" from the mic.
    I already took the battery out for several minutes, deactivated my alarm settings and unchecked the "automatic pair" checkbox in bluetooth, but it all had no effect so far!
    Since I use my Z10 also and mainly for business, this is pretty awkward
    PLZ anybody...HELP ME
    THX
    Paddy

    Thanks. Insight appreciated.

  • Weird Outlook prob

    I have a Nomad Jukebox Zen Xtra. When I use the Creative Sync Manager, Outlook goes nuts. Its icon blinks on the taskbar and the only way to make it stop is to reboot the computer. I have looked all over and cannot find a setting that will stop this behavior.
    What else can I try?

    LissaKay,
    The only thing I can think of is the Sync manager may be attempting to check the calendar / tasks / contacts and Outlook is trying to bring up a "warning: do you wish to allow this" warning.
    Do you have any pop-up blockers or other utilities that interact with Outlook?
    Edit: That doesn't make much sense however now that I think about which player you have. Sorry about that. Do you happen to use a player that DOES have the contacts / outlook sync features? Perhaps another player that this version was installed for?
    DanielMessage Edited by Daniel-CL on 05-05-2006 04:28 PM

  • Zen Xtra weird skipping prob

    On my girlfriend's Zen Xtra 40gb, we have a really odd skipping problem. At seemingly random intervals, the player seems to insert split second sections of other songs into whatever's playing. It's really rather disconcerting. I've tried formatting and updating the firmware, but it's made no difference. Any ideas?

    I also have this player and "sometimes" mine has the same problem.
    The way i fix this is take out the "skipping" tracks out of "selected music" then put them back in and that will sort the problem. Well it does for me.
    thats the only thing i know what to do.
    Hope that hel
    ps.
    steven

  • Java Dialog Boxes Don't Stay Open and Automatically Close

    Hi I'm having this weird Java prob. Initially I thought it was a net beans problem but I found out all java apps have this problem on my pc.
    Dialog boxes automatically close after some time. Please help me resolve this issue.
    Windows 7 x64
    Asus P8P67 Pro
    Intel Core i5 2500K
    ATI Radeon HD6970
    Path:
    C:\PROGRAM FILES (X86)\NVIDIA CORPORATION\PHYSX\COMMON;C:\PROGRAM FILES (X86)\ATI STREAM\BIN\X86_64;C:\PROGRAM FILES (X86)\ATI STREAM\BIN\X86;%SYSTEMROOT%\SYSTEM32;%SYSTEMROOT%;%SYSTEMROOT%\SYSTEM32\WBEM;%SYSTEMROOT%\SYSTEM32\WINDOWSPOWERSHELL\V1.0\;D:\DRIVERS\ATI.ACE\CORE-STATIC;C:\PROGRAM FILES\INTEL\DMIX;D:\INSTALLED SOFTWARES\JEDIT;C:\PROGRAM FILES (X86)\MICROSOFT SQL SERVER\100\TOOLS\BINN\;C:\PROGRAM FILES\MICROSOFT SQL SERVER\100\TOOLS\BINN\;C:\PROGRAM FILES\MICROSOFT SQL SERVER\100\DTS\BINN\;E:\More Software Setups\Educational Software\Game Programming\Tortoise Mercurial Client for Ogre Source\;E:\More Software Setups\Educational Software\Game Programming\CMake 2.8\bin;E:\More Software Setups\Educational Software\Game Programming\Tortoise SVN for Ogre AL\bin;D:\Installed Softwares\DirectX SDK\Lib\x64;D:\Installed Softwares\DirectX SDK;D:\Installed Softwares\JDK\jdk\bin;C:\Program Files (x86)\Calibre2\;C:\Program Files\MySQL\MySQL Server 5.5\bin;C:\MinGW\bin;C:\tomcat\lib
    Thanking you,
    sidk47

    This is not a common problem and probably not related to the JRE directly. You have something installed on your system that is doing this. I hope for you it is some sort of trigger happy protection software which you can control yourself, but I would consider doing a full spyware, malware and virusscan sweep using a respectable piece of scanning software.
    If you want to believe it is related to Java, then completely uninstall your JRE/JDK, do a ccleaner registry cleanup and then reinstall the JRE/JDK. If the problem persists, it really is not the JRE.

  • Return rows when there is a certain difference between dates

    Hello.
    I have table called
    #president#
    pres_name
    birth_date
    and
    #winner#
    name
    year_elected
    I would like to have all presidents returned, who where under the age 50 when they where elected.
    year_elected is only a 4 digit number; 1924 etc while birth_date is 2001-01-01 etc.
    I have no idea how to make this work, ive tried substr and alot of other weird (and prob wrong) stuff.
    select distinct p.pres_name, substr(p.birth_date, 0, 4), w.year_elected
    from president p, winner w
    where p.pres_name = w.nameI did this query witch will show me all presidents, and their dates of election and date of birth. Now i just want something that only returns the guys where its a 49 (?) value difference between birth_date and year_elected
    Johan
    Edited by: user10248089 on 2008-okt-02 00:42

    Based on Dave's information about presidents being elected on first Tuesday in Nov...
    SQL> with president as (select 'Bob' as pres_name, to_date('1/7/1934','DD/MM/YYYY') as birth_date from dual union all
      2                     select 'Fred', to_date('13/5/1950','DD/MM/YYYY') from dual union all
      3                     select 'Jim', to_date('21/12/1960','DD/MM/YYYY') from dual)
      4      ,winner    as (select 'Bob' as name, '1979' as year_elected from dual union all
      5                     select 'Fred', '2005' from dual union all
      6                     select 'Jim', '2000' from dual)
      7  --
      8  select p.pres_name, p.birth_date, w.year_elected
      9        ,trunc(months_between(next_day(to_date('01/11/'||w.year_elected,'DD/MM/YYYY'),'TUE'),birth_date)/12) as age
    10  from president p join winner w on (p.pres_name = w.name)
    11  /
    PRES BIRTH_DAT YEAR        AGE
    Bob  01-JUL-34 1979         45
    Fred 13-MAY-50 2005         55
    Jim  21-DEC-60 2000         39
    SQL>And the WHERE clause can be applied based on the same calculation as shown in the age column

  • IMessage - iPhone 4s ..Weird probs with single person

    First post from me - as I can usually find the answers by browsing the forums ... But - This is weird and I wonder if any of you guys have seen it before.  Can't find anything that specifically addresses this prob !
    Whenever I send messages to a single person they aways go as SMS Texts (in green) and not in iMessage (Blue).  However,
    1.  I can send and receive to all other iPhone Users using iMessage through the WiFi/3G
    2.  The person concerned can send to me and it will use iMessage.
    3.  The person concerned can also send and receive to other iPhone users via iMessage
    The Minute I open a message to this person the send button remains green...  I have checked pretty much ALL of the settings and the fixes.
    However, iMessage pretty much works for me except to one person.
    Any ideas..  I have done the normal checks on my phone and also deleted the contact and associated messages and re-created. It just doesn't see this single user and iMessage enabled !!!!
    \Neil

    Update :- Fixed it ...
    Can't really understand why .... But ...
    I put another PAYG sim in the phone (EE) and let it connect to the other network...
    Then I put the original contract sim back in (Vodafone) and when I type the SEND turns Blue...
    How this fixed a single person on EE when I already send successful iMessages to other people on this network I can't tell....
    The only clue might be the vodafone network seemed to ask if it was OK to charge me for the SMS to activate iMessage...  That may have reset something.. Who knows ..
    Worth a try if u have a weird prob as above ..
    Neil

  • Probs during creating cost centers

    Hi CO Gurus,
    today i have 2 questions:
    1. I m creating cost centers in my ides system. i ask me to run V8J: Maintain Cost Center Hierarchy first. can anyone tell me when should i run this.
    2. when i creating cost centers using ks01, it reports Controlling area XXXX does not have a standard hierarchy (please assign one).
    3. when i was creating the standard hierarchy,  it said You have not yet created a cost center standard hierarchy for COAr IDCN
    can anyone guide me how to fix this prob.
    any response will be awarded.
    thanks
    samson

    For creation Cost Center, Creating of  controlling area in OKKP and creation of noranges for Controlling docs under Groups In KANK is required. But whenever you require assign Profit center to Cost Center then only you can create Profit center group under Hierar key under KCH1 later create profit Center in KE51 and assign it in Cost Center.But it is not mandatory to create Cost center. while creating cost center it gives worning message to remember you about non assingmet of profit center if you ignore it with pressing enter then cost center is allowed to create.
    assign points in the way of say thank.
    Regards,
    NSB

  • MBP internal drive failure causes external drive probs. Weird...

    I've been booting off an external drive for some months now. I figured it would save wear on the internal drive, and when my boot drive eventually failed (the external one) it would be quicker and a lot cheaper to swap that out with another external one than to have to change the internal drive. I use FW800 and not seen any performance hit.
    Yesterday (with the whole system booted from the external drive) it started going really buggy, everything was painfully slow - like, virtually at a standstill, and with a very slow wi-fi internet connection.
    I tried rebooting. It would only boot from the external drive, and only if I held down the option key and selected a boot from the options that appear. Otherwise just the apple symbol and an endless twirly. It wouldn't boot from the internal drive +at all.+
    Eventually I booted from the SL disk and ran disk utilities. To my surprise the internal drive was corrupted in some way and couldn't be repaired. I wiped the drive and restored it using Time Machine (stored on yet another drive). Everything then worked fine, except for the slow wi-fi.
    So, +why should a corrupted internal drive stop the MBP booting from an external drive?+ This is worrying for me if the machine ever goes down at work and I have to rely on booting from another drive, which then might not boot properly and is buggy.
    To complicate matters (or does it offer a clue?) this morning I booted from the usual external drive. It worked ok, but wi-fi was still slow. Another Mac here was showing the same internet slowness, so I figured it was maybe the ISP.
    Then the MBP itself started going slow n buggy again. A check on the internal drive showed no return of yesterday's probs. On a hunch I unplugged the router from the mains and plugged it in again. The wi-fi then worked properly as did everything else.
    +Why would a buggy router affect my MBP? Could it have corrupted the internal drive?? Why should any of that affect the machine's ability to boot from an external drive..?+
    Thoughts anyone?

    clicked 'solved' but the credit went to the wrong place!
    it's solved, thanks to clinton:
    Re: Re: clone no longer sees MBP internal drive

  • Weird Prob with Layouts

    I have a weird problem...
    I have put on my system tray the applet that makes the layouts appear.
    I have chosen for the flags to appear and i have english german and greek...
    while for us and de the flag appears...for the greek i just see a simple GR and no flag...Does anybody know how I can fix it?

    >
    shown below. The code runs fine when i comment the
    subquery in select, which gets "sub_inv" column
    value(3rd subquery in the select). if i include it
    then i get ora-01427 error though neither of the sub
    queries return multiple rows.
    Please let me know where i am going wrong. Are you sure about this ?
    I believe this is Oracle apps tables, and if it's true one item in one org can have multiple rows with the same subinventory_code in mtl_onhand_quantities_detail table.
    Run the query below to check and see if it return any rows :
    select inventory_item_id, organization_id,count(subinventory_code)
    from mtl_onhand_quantities_detail
    group by inventory_item_id,organization_id
    having count(subinventory_code) > 1

  • Weird prob with sub query

    Hello All,
    I am having trouble with the code. I am using a subquery in the select statment and the same in the where clause(2nd sq in the select which populates on_hand column). I have highlighted the sub query as shown below. The code runs fine when i comment the subquery in select, which gets "sub_inv" column value(3rd subquery in the select). if i include it then i get ora-01427 error though neither of the sub queries return multiple rows.
    Please let me know where i am going wrong.
    select ms.organization_id, ms.segment1,ms.description,
    ms.planner_code,pl.closed_code,ploc.quantity - ploc.quantity_received - ploc.quantity_cancelled qty_rem,
    (select full_name from
              per_all_people_f p,
              inv.mtl_planners mp
              where
              ms.planner_code = mp.planner_code
              and mp.employee_id = p.person_id
              and mp.organization_id = ms.organization_id) planner_name,
    min_minmax_quantity, max_minmax_quantity,
    /***2nd sq***/
    (select sum( oh.transaction_quantity)
                   from mtl_onhand_quantities_detail oh
                   where ms.inventory_item_id = oh.inventory_item_id
                   and ms.organization_id = oh.organization_id
                   ) on_hand,
    /***3rd sq***/
    (select oh.subinventory_code
                   from mtl_onhand_quantities_detail oh
                   where ms.inventory_item_id = oh.inventory_item_id
                   and ms.organization_id = oh.organization_id ) sub_inv,
    ph.segment1, pl.line_num, ploc.shipment_num,
    nvl((select vendor_name from po_vendors where vendor_id = ph.vendor_id),'NONE') vendor_name,
    pr.release_num,
    PL.PO_LINE_ID,
    PH.PO_HEADER_ID
    from
    inv.mtl_system_items_b ms,
    po.po_line_locations_all ploc,
    po_lines_all pl,
    po_headers_all ph,
    po.po_releases_all pr
    where 1=1
    and ms.inventory_item_id = pl.item_id(+)
    and pl.po_line_id = ploc.po_line_id
    and pl.po_header_id = ph.po_header_id
    and ploc.po_release_id = pr.po_release_id(+)
    and ploc.quantity - (ploc.quantity_received + ploc.quantity_cancelled) > 0
    and nvl(pl.closed_code (+), 'OPEN')= 'OPEN'
    AND NVL(PLOC.CLOSED_CODE,'OPEN') = 'OPEN'
    ---and ms.organization_id = 43
    --and ms.inventory_item_id = 708
    and max_minmax_quantity is not null
    and min_minmax_quantity is not null
    and (select sum( oh.transaction_quantity)
                   from mtl_onhand_quantities_detail oh
                   where ms.inventory_item_id =oh.inventory_item_id
                   and ms.organization_id = oh.organization_id
                   ) is not null

    >
    shown below. The code runs fine when i comment the
    subquery in select, which gets "sub_inv" column
    value(3rd subquery in the select). if i include it
    then i get ora-01427 error though neither of the sub
    queries return multiple rows.
    Please let me know where i am going wrong. Are you sure about this ?
    I believe this is Oracle apps tables, and if it's true one item in one org can have multiple rows with the same subinventory_code in mtl_onhand_quantities_detail table.
    Run the query below to check and see if it return any rows :
    select inventory_item_id, organization_id,count(subinventory_code)
    from mtl_onhand_quantities_detail
    group by inventory_item_id,organization_id
    having count(subinventory_code) > 1

  • Creative Zen weird prob

    I have a 5g Creative Zen which was working fine until today when I dropped it. The player still turns on and connect to my PC ok. I'm still able to add and remove music from my library and it still plays ok but I cant get the view the screen its just blank so cant access any other music aprt from the last one I was playing as cant see what I am scrolling though. Tried to reset it but can see anything so really no idea what is going on. Pretty sure its not the hard dri've and the screen still lights up so not sure what is going on. Any ideas?

    Did you break the harddisk? it sounds like you did maybe, but I dont know. Just from what I have read before, that could be it...

  • Prob in updating profit&cost centers while useing  'BAPI_GOODSMVT_CREATE'

    I am using FM 'BAPI_GOODSMVT_CREATE' , and i am passing below parameters
    header info...
            wa_goodsmvt_header-pstng_date = wa_gi-budat.
            wa_goodsmvt_header-doc_date = wa_gi-budat.
            wa_goodsmvt_code = '03'.
    item info....
            wa_item-material   = wa_gi-matnr.
            wa_item-plant      = wa_gi-werks.
            wa_item-stge_loc   = 'SL01' .
            wa_item-move_type  = '201'.
            wa_item-entry_qnt  = wa_gi-qty.
            wa_item-entry_uom  = wa_gi-meins.
            wa_item-costcenter = wa_gi-kostl. <==
            wa_item-profit_ctr = wa_gi-prctr.    <==
            wa_item-mvt_ind    = space.
            APPEND wa_item TO it_item.
              CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
              EXPORTING
                goodsmvt_header  = wa_goodsmvt_header
                goodsmvt_code    = wa_goodsmvt_code
              IMPORTING
                materialdocument = v_mat_doc
                matdocumentyear  = v_doc_year
              TABLES
                goodsmvt_item    = it_item
                return           = it_ret.
            IF sy-subrc = 0 AND v_mat_doc <> ''.
              CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                EXPORTING
                  wait = 'X'.
              WRITE:/ 'Good Issue',v_mat_doc.
            ELSE.
              CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
            ENDIF.
    data is passing to FM is absolutely fine , problem is after generating document number , if observe profit center and cost center are not updating properly , it is showing material profit center and cost center.....
    but it should take and update profit center and cost center which i have passed . what is the solution??

    ok

Maybe you are looking for