Weird charging problem help please

every morning when i wake up, its always at 92%. then if i just unplug it and plug it back in, it will start going to 100%
why does it always do this?

nachdenki wrote:
well ... from what i've read: if the battery falls below 40%, some irreversible chemical reactions lower the overall capacity of the battery.
This is likely not true for the battery technology in the 3GS.
if you keep it at very high voltage all the time (so at 100% or so) it shortens the battery life, so it will die earlier.
This is definitely not true.
Phil

Similar Messages

My macbook pro is not charging - any help please!?

My macbook pro is not charging - any help please!?
<Edited by Host>

Hi sdennisonta,
If you are having an issue with charging your MacBook Pro, I would suggest that you troubleshoot using the steps in this article -
Mac notebooks: All about batteries - Apple Support
If the battery appears to be working correctly you may want to see if the issue lies with your power adapter. Use the steps in this article -
Apple Portables: Troubleshooting MagSafe adapters - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

VIRUS PROBLEMS, HELP PLEASE???

I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!

Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case)

ICloud problems help please!

I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account. I think I was hacked and my password and security questions changed. I want to log out of iCloud and start using my current iCloud account. I know these are security measures, but how can I get logged out??? My iPhone is having problems since the latest update and now I can't make a call or text. I can't call apple support without a working number HELP Please.

Hello shelbyrecords,
Oh no! That sounds really frustrating. Unfortunately, if iCloud Find my iPhone Activation Lock is enabled on the device we’ll need to gain access to your previous Apple ID account to disable it. Based on the information you have provided, it sounds like you may need a personalized support experience to recover your previous Apple ID:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Thanks,
Matt M.

Soundtrack problems - help please

Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?

Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there?

SQL INSERT problem - help please

Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
     int iCounter = 0; //counter for incremental value
     while (igroups.hasNext()) {
          Selection s = (Selection) igroups.next();
          iCounter+=1; //increment
%>
<tr>
     <td style="background-color:ivory" noWrap width="20">
     <input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
        <td style="background-color:ivory" noWrap width="39">
             <%= s.getNicno() %> </td>
     <td style="background-color:ivory" noWrap width="174">
          <input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
     at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.

Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : )

Multiselect problem Help please!!

Hi all,
I am currently using Application Express 3.1.2.00.02 I have developed an online questionnaire with a multiselect list for one of the questions. The problem i am having is that i need each choice to be totaled up separately on the report generated.
My table of answers looks like this:
Column name e.g. (Question 9)
Answer "Dog" "Cat" "Mouse" "Snake" (underneath column name Question 9 depending on what is selected).
The reporting page would look like below:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
and for the question you could have another respondent who chooses similar of items on the multiselect, so their answer looks like this:
Answer
"Question 9" Dog
"Question 9" Snake
This would then start a new row on the reporting page like below which is not what i want:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
Dog: Snake 1
But the report should look like this:
*(Column Question 9)* Count
Dog 2
Mouse 1
Snake 2
The current SQLquery i am using is below:
select "QUESTION 9",
count(*) c
from "P1 DQUESTIONNAIRE"
group by "QUESTION 9"
Thanks for your help and suggestions,
'S'

How to make sure your forum post will never be answered:
1) Make sure your subject line is completely meaningless (i.e. HELP PLEASE!) and describes no part of your actual problem
2) State that you are having "a few problems" but make sure to offer no details whatsoever what those problems are or what the symptoms are.
3) Post large volumes of code instead of distilling the problem down to a compact snippet
4) For extra points, make the code hard to read by refusing to make use of the "code" tag.

K8N Neo2-fx Ram problem Help please

I have three ram(2x512MB single sided , 1x1GB double sided). Is there any way I can put them all on the motherboard? When I place them all the computer is not starting and it`s making a "beep" every 2-3 seconds. If i connect the 1GB double sided on the Dimm1(green) and the one 512MB single sided on the Dimm3(green) it`s working properly. Is there any way I can use all my ram at the same time. I`m desperate. Help please... thank you

Quote from: wodahS on 09-November-06, 05:55:17
How can I put my computer facts under any post I am posting? I should make it my signature?
That's the rule mate which you need to gives all your component in details including your PSU and Bios revision so that others can help you! Like what BOSSKILLER say it won't works with 3 DIMMS unless you purhased another 1 GB of RAM then it can solve your problem with 4 DIMMS or else with 2*512MB RAM. Make sure that you've lowered your HT to <=800Mhz as default is 1000Mhz. GD luck.

My iphone 3gs will not charge anymore help please!!!

At first it would only charge if i placed it in a specific way but now its not charging at all. Its brand new only got it a week ago and it had these charging issues out of the box. I cant go to a genius bar or use my warranty because i live in malawi a small country in africa where most people see an iphone as alien technology so please help a brother out!!

If your iPhone has a hardware problem and it sounds like it does, no one here can help.
The iPhone includes a one year warranty, which can be used in the country where the iPhone was sold officially by Apple.

SoundBlaster Zx major problems help please!

I tryd 3 Soundblaster Zx,s so far and i still dont understand why i have this problem, my mainbord is a MSI Big Bang Xpower 2 my previous soundblaster was a X-Fi Fitality Titanium Pro so if seen the reviews of the Zx on the net i was really exited about it, but now comes the weird part my mainbord wont detect any of these cards! i tryd 3 so far and al 3 had the same problem its not detecting the card the first one was acually detcting it for 2 days after that one morning i booted the pc and there was the speaker with the red cross true it no soundcard detected, the second one did not regonize the card @ all, and the third one was the same thing i tryed updating to the latest bios i tryd resetting cmos i tryd really everything i could think of, i realy need help with this so someone from creative please look further into this because this is a combination thats not working well i think
My X-fi is working perfect no matter what.
In other systems the Zx is working fine the problem i have is similar to this http://www.overclock.net/t/1350082/m...series-problem
Hopefully i get some ansers soon because this is just unacepteble.

i tryed updating to the latest bios i tryd resetting cmos i tryd really everything i could think of,
FWIW might want to check here: http://www.msi.com/service/forum/
MSI boards, Intel at least, seem to hold onto data, can be a bit of a PITA to clear the bios & update. Folks in the forum recommend not just using the reset button if you have one, or using the reset jumper, but pulling the battery for a while -- if the date's reset you know it was cleared -- if not than you only got at best a partial clear or reset. For updating the bios they recommend a tool & procedure you'll find in the forum, & they have a separate section with beta bios that might also help.
Also, I'm not familiar with your m/board, but you might want to double check the manual etc... My board for example has 2 pci-e slots [beside the 3 for graphics cards], but only one can be used at any one time.

Hibernate-very strange problem, help please

Hi, i got such a strange problem that im sure you ll think im doin crazy talk :) , i dont see why this would happen at all, i have a class called "Package", mapped to a table "package". whenever i do a query on this table using hibernate, even the simplest "find all" kinda of query, hibernate does update on the table b4 doin the query! even more weird, it does the update when the first query on this table happens, it deletes all values of a column (yes only this column); then if i do the same query again, no update at all. however if now i mannuall add those missing values, it does the update again and deletes them! sry its confusing, heres my code and more of wat i done:
The mapping Package.hbm.xml
<hibernate-mapping package="tuition.bo">
<class name="Package" table="package">
<id name="id" column="study_package_id" type="long">
<generator class="sequence"/>
</id>
<property name="name" column="name" not-null="true"/>
<property name="satTiming" column="sat_timing" not-null="false"/>
<property name="satSubjects" column="sat_subjects" not-null="false"/>
<property name="sunTiming" column="sun_timing" not-null="false"/>
<property name="sunSubjects" column="sun_subjects" not-null="false"/>
<set name="classes" inverse="true" cascade="delete-orphan" lazy="true">
<key column="package_id"/>
<one-to-many class="Class"/>
</set>
</class>
</hibernate-mapping>
For example initialy i populated database using hibernate, like this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 9-12 business 9-12 law
2 no.2 9-11 business 9-11 law
Then after i populated this database, i did this query:
<b>List res=getHibernateTemplate().find("FROM Package");</b>
and you can see the log file as such: (excerpt)
16:23:06,687 INFO TransactionFactoryFactory:31 - Using default transaction strategy (direct JDBC transactions)
16:23:06,703 INFO TransactionManagerLookupFactory:33 - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
16:23:09,968 DEBUG JDBCTransaction:46 - begin
16:23:09,968 DEBUG JDBCTransaction:50 - current autocommit status: true
16:23:09,968 DEBUG JDBCTransaction:52 - disabling autocommit
<b>16:23:10,640 DEBUG SQL:324 - select</b> studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, ....... from _3AT_package studypacka0_
Hibernate: select studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, studypacka0_.day as day12_, studypacka0_.sat_timing as sat5_12_, studypacka0_.sat_subjects as sat6_12_, .......
16:23:10,734 DEBUG JDBCTransaction:83 - commit
<b>16:23:10,796 DEBUG SQL:324 - update</b> _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
<b>16:23:10,812 DEBUG SQL:324 - update </b>_3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
<b>16:23:10,812 DEBUG SQL:324 - update</b> _3AT_package set name=?, description=?,
16:23:10,953 DEBUG JDBCTransaction:173 - re-enabling autocommit
16:23:10,953 DEBUG JDBCTransaction:96 - committed JDBC Connection
as you can see, it does update and changed table field values to this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 business law
2 no.2 business law
---------- all tiimings are gone. and now if i re-do the same query, there are NO UPDATE operations....howver if i add some values to sat_timing, sun_timing, and re-do the query, very surprisingly, i saw those update operations which delete all timing values again!
im totally lost... i havent changed any config, this doenst happen to my other classes at all but just this one.... any ideas please! even some thought of what may caused this would be great help! thank you!

well i got the setters wrong.... being so stupid i am... sry for creating such a long and massy thread.

My iPod doesn't show up on "My Computer" or iTunes and it doesn't sync or charge. Help please?

I have an iPod Classic, the 2nd most recent version. I havn't had problems with it until a week ago. Before I had the new iTunes update, a week ago, it wouldn't show up in my Device's or "My Computer" , wont sync and It wouldn't charge either. I thought to myself "Maybe I should update my iTunes, maybe thats why it's not working". I updated my iTunes library to the most recent software last night thinking it would help but... It didn't help at all and made things much more complicated. I don't like how the new iTunes navigates and the iTunes Helper isn't there now. I'm still facing the problem where it doesn't show up in iTunes AND it doesn't show up on "My Computer" AND still doesn'tt sync but the thing thats different is that it'll charge a quarter bit and say it's done, or it wont charge at all and stay on my home screen. I need help here. Anyone have any suggestions?

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
If it does not even turn on
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Shockwave Player 11 - Problem HELP PLEASE!!

I have upgraded to Shockwave Player 11 but I am having big
problems. I have installed it but when going on a Shockwave
supported sites ie; iSketch, it comes up in a white-box with a
message ''Adobe Shockwave Player is now installing.'' ''Installing
compatibility components.'' with a white bar below which is
supposed to fill up but doesnt. Screenshot on Link below. I have
been trying it both on IE7 & Firefox, tried both semi and full
installer but no luck. Please help?
http://i7.photobucket.com/albums/y295/ldndude/others/ShockwaveFlash11Problem.jpg

quote:
This worked for me. It will actually let me access the game,
but it is unplayable. The drawings are all just random lines. When
I draw people see this problem, it looks like I am just drawing
random lines on the canvas.
I'm glad 4 helping u.4 me all the games r playable.But the
new ones like....
http://www.miniclip.com/games/power-boat/en/
or
http://www.miniclip.com/games/rally-championship/en/
r very slow.

How do I solve the following Itunes error -42404 I have tried uninstalling as well as repair and re installing, I keep getting the same problem, Help please

Please help I am un able to get my I Tunes back on my Windows 7 -64 after a Virus clean out, How can I solve a problem with the followin ITunes error of -42404 I have tried the usual uninstall and reinstal, as well as the repair all at no success, do any of you have any solution Ideas that have solved this in the past? Please Help, Thank you...

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Carkit 112 problems - help please!

got a new car, a new shape bmw 328 coupe
it already has installed a nokia carkit 112 bluetooth handsfree device
problem being, the previous owner doesn't know the password so i can pair the device with my phone when i get in the car
my phone picks it up fine, but when asked to enter a password it rejects every 'obvious' one like 0000,1111 etc
i then took the dash apart to find the box, as i was told the last 4 digits of the serial number should be the pin, so i found the box
problem being there are quite a few numbers on it, and when i tried entering the last 4 digits from them none seemed to work
can someone confirm exactly what is my serial number on the box, as it contains several strains of information, whether the pin/code will have letters in it as well and what my pin should be?
also, is it possible the previous owner changed the pin and thats why it isn't pairing? or is that not possible on this device? i didn't get any manuals for it so not sure if you can change it yourself?
is there any way of resetting the pin?
otherwise it looks like im stuck with the kit in the car and its of no use to me as i just can't for the life of me get a pin number to work with it
image of the box with information is hosted at the following address:
http://img245.imageshack.us/img245/4839/dsc01395xn9.jpg
your help would be much appreciated
many thanks
marc
Message Edited by the_italian on 05-Apr-2008 09:11 PM

hi, i also have carkit 112 and have lost the manual and passcode. I have bought new phone Nokia N81. Reset and tried 0000 and 1234 and no luck. Can't find main junction box only speaker box having removed various panels in my toyota yaris. Garage will charge me £40 to find box and serial no. My new phone finds the carkit but just says unable to pair with this device. I also put in 0135, 1226, 3711 and 1016 which you suggested before. Any other suggestions before I return to garage option.

Weird charging problem help please

Similar Messages

Maybe you are looking for